ARM: mm: Recreate kernel mappings in early_paging_init()

[linux/fpc-iii.git] / drivers / leds / leds-ss4200.c

/*
 * SS4200-E Hardware API
 * Copyright (c) 2009, Intel Corporation.
 * Copyright IBM Corporation, 2009
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Author: Dave Hansen <dave@sr71.net>
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/uaccess.h>

MODULE_AUTHOR("Rodney Girod <rgirod@confocus.com>, Dave Hansen <dave@sr71.net>");
MODULE_DESCRIPTION("Intel NAS/Home Server ICH7 GPIO Driver");
MODULE_LICENSE("GPL");

/*
 * ICH7 LPC/GPIO PCI Config register offsets
 */
#define PMBASE          0x040
#define GPIO_BASE       0x048
#define GPIO_CTRL       0x04c
#define GPIO_EN         0x010

/*
 * The ICH7 GPIO register block is 64 bytes in size.
 */
#define ICH7_GPIO_SIZE  64

/*
 * Define register offsets within the ICH7 register block.
 */
#define GPIO_USE_SEL    0x000
#define GP_IO_SEL       0x004
#define GP_LVL          0x00c
#define GPO_BLINK       0x018
#define GPI_INV         0x030
#define GPIO_USE_SEL2   0x034
#define GP_IO_SEL2      0x038
#define GP_LVL2         0x03c

/*
 * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
 */
static DEFINE_PCI_DEVICE_TABLE(ich7_lpc_pci_id) = {
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
        { } /* NULL entry */
};

MODULE_DEVICE_TABLE(pci, ich7_lpc_pci_id);

static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
{
        pr_info("detected '%s'\n", id->ident);
        return 1;
}

static bool __initdata nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");

/*
 * struct nas_led_whitelist - List of known good models
 *
 * Contains the known good models this driver is compatible with.
 * When adding a new model try to be as strict as possible. This
 * makes it possible to keep the false positives (the model is
 * detected as working, but in reality it is not) as low as
 * possible.
 */
static struct dmi_system_id nas_led_whitelist[] __initdata = {
        {
                .callback = ss4200_led_dmi_callback,
                .ident = "Intel SS4200-E",
                .matches = {
                        DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
                        DMI_MATCH(DMI_PRODUCT_NAME, "SS4200-E"),
                        DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
                }
        },
        {}
};

/*
 * Base I/O address assigned to the Power Management register block
 */
static u32 g_pm_io_base;

/*
 * Base I/O address assigned to the ICH7 GPIO register block
 */
static u32 nas_gpio_io_base;

/*
 * When we successfully register a region, we are returned a resource.
 * We use these to identify which regions we need to release on our way
 * back out.
 */
static struct resource *gp_gpio_resource;

struct nasgpio_led {
        char *name;
        u32 gpio_bit;
        struct led_classdev led_cdev;
};

/*
 * gpio_bit(s) are the ICH7 GPIO bit assignments
 */
static struct nasgpio_led nasgpio_leds[] = {
        { .name = "hdd1:blue:sata",     .gpio_bit = 0 },
        { .name = "hdd1:amber:sata",    .gpio_bit = 1 },
        { .name = "hdd2:blue:sata",     .gpio_bit = 2 },
        { .name = "hdd2:amber:sata",    .gpio_bit = 3 },
        { .name = "hdd3:blue:sata",     .gpio_bit = 4 },
        { .name = "hdd3:amber:sata",    .gpio_bit = 5 },
        { .name = "hdd4:blue:sata",     .gpio_bit = 6 },
        { .name = "hdd4:amber:sata",    .gpio_bit = 7 },
        { .name = "power:blue:power",   .gpio_bit = 27},
        { .name = "power:amber:power",  .gpio_bit = 28},
};

#define NAS_RECOVERY    0x00000400      /* GPIO10 */

static struct nasgpio_led *
led_classdev_to_nasgpio_led(struct led_classdev *led_cdev)
{
        return container_of(led_cdev, struct nasgpio_led, led_cdev);
}

static struct nasgpio_led *get_led_named(char *name)
{
        int i;
        for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
                if (strcmp(nasgpio_leds[i].name, name))
                        continue;
                return &nasgpio_leds[i];
        }
        return NULL;
}

/*
 * This protects access to the gpio ports.
 */
static DEFINE_SPINLOCK(nasgpio_gpio_lock);

/*
 * There are two gpio ports, one for blinking and the other
 * for power.  @port tells us if we're doing blinking or
 * power control.
 *
 * Caller must hold nasgpio_gpio_lock
 */
static void __nasgpio_led_set_attr(struct led_classdev *led_cdev,
                                   u32 port, u32 value)
{
        struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
        u32 gpio_out;

        gpio_out = inl(nas_gpio_io_base + port);
        if (value)
                gpio_out |= (1<<led->gpio_bit);
        else
                gpio_out &= ~(1<<led->gpio_bit);

        outl(gpio_out, nas_gpio_io_base + port);
}

static void nasgpio_led_set_attr(struct led_classdev *led_cdev,
                                 u32 port, u32 value)
{
        spin_lock(&nasgpio_gpio_lock);
        __nasgpio_led_set_attr(led_cdev, port, value);
        spin_unlock(&nasgpio_gpio_lock);
}

static u32 nasgpio_led_get_attr(struct led_classdev *led_cdev, u32 port)
{
        struct nasgpio_led *led = led_classdev_to_nasgpio_led(led_cdev);
        u32 gpio_in;

        spin_lock(&nasgpio_gpio_lock);
        gpio_in = inl(nas_gpio_io_base + port);
        spin_unlock(&nasgpio_gpio_lock);
        if (gpio_in & (1<<led->gpio_bit))
                return 1;
        return 0;
}

/*
 * There is actual brightness control in the hardware,
 * but it is via smbus commands and not implemented
 * in this driver.
 */
static void nasgpio_led_set_brightness(struct led_classdev *led_cdev,
                                       enum led_brightness brightness)
{
        u32 setting = 0;
        if (brightness >= LED_HALF)
                setting = 1;
        /*
         * Hold the lock across both operations.  This ensures
         * consistency so that both the "turn off blinking"
         * and "turn light off" operations complete as a set.
         */
        spin_lock(&nasgpio_gpio_lock);
        /*
         * LED class documentation asks that past blink state
         * be disabled when brightness is turned to zero.
         */
        if (brightness == 0)
                __nasgpio_led_set_attr(led_cdev, GPO_BLINK, 0);
        __nasgpio_led_set_attr(led_cdev, GP_LVL, setting);
        spin_unlock(&nasgpio_gpio_lock);
}

static int nasgpio_led_set_blink(struct led_classdev *led_cdev,
                                 unsigned long *delay_on,
                                 unsigned long *delay_off)
{
        u32 setting = 1;
        if (!(*delay_on == 0 && *delay_off == 0) &&
            !(*delay_on == 500 && *delay_off == 500))
                return -EINVAL;
        /*
         * These are very approximate.
         */
        *delay_on = 500;
        *delay_off = 500;

        nasgpio_led_set_attr(led_cdev, GPO_BLINK, setting);

        return 0;
}


/*
 * Initialize the ICH7 GPIO registers for NAS usage.  The BIOS should have
 * already taken care of this, but we will do so in a non destructive manner
 * so that we have what we need whether the BIOS did it or not.
 */
static int ich7_gpio_init(struct device *dev)
{
        int i;
        u32 config_data = 0;
        u32 all_nas_led = 0;

        for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
                all_nas_led |= (1<<nasgpio_leds[i].gpio_bit);

        spin_lock(&nasgpio_gpio_lock);
        /*
         * We need to enable all of the GPIO lines used by the NAS box,
         * so we will read the current Use Selection and add our usage
         * to it.  This should be benign with regard to the original
         * BIOS configuration.
         */
        config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
        dev_dbg(dev, ": Data read from GPIO_USE_SEL = 0x%08x\n", config_data);
        config_data |= all_nas_led + NAS_RECOVERY;
        outl(config_data, nas_gpio_io_base + GPIO_USE_SEL);
        config_data = inl(nas_gpio_io_base + GPIO_USE_SEL);
        dev_dbg(dev, ": GPIO_USE_SEL = 0x%08x\n\n", config_data);

        /*
         * The LED GPIO outputs need to be configured for output, so we
         * will ensure that all LED lines are cleared for output and the
         * RECOVERY line ready for input.  This too should be benign with
         * regard to BIOS configuration.
         */
        config_data = inl(nas_gpio_io_base + GP_IO_SEL);
        dev_dbg(dev, ": Data read from GP_IO_SEL = 0x%08x\n",
                                        config_data);
        config_data &= ~all_nas_led;
        config_data |= NAS_RECOVERY;
        outl(config_data, nas_gpio_io_base + GP_IO_SEL);
        config_data = inl(nas_gpio_io_base + GP_IO_SEL);
        dev_dbg(dev, ": GP_IO_SEL = 0x%08x\n", config_data);

        /*
         * In our final system, the BIOS will initialize the state of all
         * of the LEDs.  For now, we turn them all off (or Low).
         */
        config_data = inl(nas_gpio_io_base + GP_LVL);
        dev_dbg(dev, ": Data read from GP_LVL = 0x%08x\n", config_data);
        /*
         * In our final system, the BIOS will initialize the blink state of all
         * of the LEDs.  For now, we turn blink off for all of them.
         */
        config_data = inl(nas_gpio_io_base + GPO_BLINK);
        dev_dbg(dev, ": Data read from GPO_BLINK = 0x%08x\n", config_data);

        /*
         * At this moment, I am unsure if anything needs to happen with GPI_INV
         */
        config_data = inl(nas_gpio_io_base + GPI_INV);
        dev_dbg(dev, ": Data read from GPI_INV = 0x%08x\n", config_data);

        spin_unlock(&nasgpio_gpio_lock);
        return 0;
}

static void ich7_lpc_cleanup(struct device *dev)
{
        /*
         * If we were given exclusive use of the GPIO
         * I/O Address range, we must return it.
         */
        if (gp_gpio_resource) {
                dev_dbg(dev, ": Releasing GPIO I/O addresses\n");
                release_region(nas_gpio_io_base, ICH7_GPIO_SIZE);
                gp_gpio_resource = NULL;
        }
}

/*
 * The OS has determined that the LPC of the Intel ICH7 Southbridge is present
 * so we can retrive the required operational information and prepare the GPIO.
 */
static struct pci_dev *nas_gpio_pci_dev;
static int ich7_lpc_probe(struct pci_dev *dev,
                                    const struct pci_device_id *id)
{
        int status;
        u32 gc = 0;

        status = pci_enable_device(dev);
        if (status) {
                dev_err(&dev->dev, "pci_enable_device failed\n");
                return -EIO;
        }

        nas_gpio_pci_dev = dev;
        status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
        if (status)
                goto out;
        g_pm_io_base &= 0x00000ff80;

        status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
        if (!(GPIO_EN & gc)) {
                status = -EEXIST;
                dev_info(&dev->dev,
                           "ERROR: The LPC GPIO Block has not been enabled.\n");
                goto out;
        }

        status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
        if (0 > status) {
                dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
                goto out;
        }
        dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
        nas_gpio_io_base &= 0x00000ffc0;

        /*
         * Insure that we have exclusive access to the GPIO I/O address range.
         */
        gp_gpio_resource = request_region(nas_gpio_io_base, ICH7_GPIO_SIZE,
                                          KBUILD_MODNAME);
        if (NULL == gp_gpio_resource) {
                dev_info(&dev->dev,
                         "ERROR Unable to register GPIO I/O addresses.\n");
                status = -1;
                goto out;
        }

        /*
         * Initialize the GPIO for NAS/Home Server Use
         */
        ich7_gpio_init(&dev->dev);

out:
        if (status) {
                ich7_lpc_cleanup(&dev->dev);
                pci_disable_device(dev);
        }
        return status;
}

static void ich7_lpc_remove(struct pci_dev *dev)
{
        ich7_lpc_cleanup(&dev->dev);
        pci_disable_device(dev);
}

/*
 * pci_driver structure passed to the PCI modules
 */
static struct pci_driver nas_gpio_pci_driver = {
        .name = KBUILD_MODNAME,
        .id_table = ich7_lpc_pci_id,
        .probe = ich7_lpc_probe,
        .remove = ich7_lpc_remove,
};

static struct led_classdev *get_classdev_for_led_nr(int nr)
{
        struct nasgpio_led *nas_led = &nasgpio_leds[nr];
        struct led_classdev *led = &nas_led->led_cdev;
        return led;
}


static void set_power_light_amber_noblink(void)
{
        struct nasgpio_led *amber = get_led_named("power:amber:power");
        struct nasgpio_led *blue = get_led_named("power:blue:power");

        if (!amber || !blue)
                return;
        /*
         * LED_OFF implies disabling future blinking
         */
        pr_debug("setting blue off and amber on\n");

        nasgpio_led_set_brightness(&blue->led_cdev, LED_OFF);
        nasgpio_led_set_brightness(&amber->led_cdev, LED_FULL);
}

static ssize_t nas_led_blink_show(struct device *dev,
                                  struct device_attribute *attr, char *buf)
{
        struct led_classdev *led = dev_get_drvdata(dev);
        int blinking = 0;
        if (nasgpio_led_get_attr(led, GPO_BLINK))
                blinking = 1;
        return sprintf(buf, "%u\n", blinking);
}

static ssize_t nas_led_blink_store(struct device *dev,
                                   struct device_attribute *attr,
                                   const char *buf, size_t size)
{
        int ret;
        struct led_classdev *led = dev_get_drvdata(dev);
        unsigned long blink_state;

        ret = kstrtoul(buf, 10, &blink_state);
        if (ret)
                return ret;

        nasgpio_led_set_attr(led, GPO_BLINK, blink_state);

        return size;
}

static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);

static int register_nasgpio_led(int led_nr)
{
        int ret;
        struct nasgpio_led *nas_led = &nasgpio_leds[led_nr];
        struct led_classdev *led = get_classdev_for_led_nr(led_nr);

        led->name = nas_led->name;
        led->brightness = LED_OFF;
        if (nasgpio_led_get_attr(led, GP_LVL))
                led->brightness = LED_FULL;
        led->brightness_set = nasgpio_led_set_brightness;
        led->blink_set = nasgpio_led_set_blink;
        ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
        if (ret)
                return ret;
        ret = device_create_file(led->dev, &dev_attr_blink);
        if (ret)
                led_classdev_unregister(led);
        return ret;
}

static void unregister_nasgpio_led(int led_nr)
{
        struct led_classdev *led = get_classdev_for_led_nr(led_nr);
        led_classdev_unregister(led);
        device_remove_file(led->dev, &dev_attr_blink);
}
/*
 * module load/initialization
 */
static int __init nas_gpio_init(void)
{
        int i;
        int ret = 0;
        int nr_devices = 0;

        nr_devices = dmi_check_system(nas_led_whitelist);
        if (nodetect) {
                pr_info("skipping hardware autodetection\n");
                pr_info("Please send 'dmidecode' output to dave@sr71.net\n");
                nr_devices++;
        }

        if (nr_devices <= 0) {
                pr_info("no LED devices found\n");
                return -ENODEV;
        }

        pr_info("registering PCI driver\n");
        ret = pci_register_driver(&nas_gpio_pci_driver);
        if (ret)
                return ret;
        for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++) {
                ret = register_nasgpio_led(i);
                if (ret)
                        goto out_err;
        }
        /*
         * When the system powers on, the BIOS leaves the power
         * light blue and blinking.  This will turn it solid
         * amber once the driver is loaded.
         */
        set_power_light_amber_noblink();
        return 0;
out_err:
        for (i--; i >= 0; i--)
                unregister_nasgpio_led(i);
        pci_unregister_driver(&nas_gpio_pci_driver);
        return ret;
}

/*
 * module unload
 */
static void __exit nas_gpio_exit(void)
{
        int i;
        pr_info("Unregistering driver\n");
        for (i = 0; i < ARRAY_SIZE(nasgpio_leds); i++)
                unregister_nasgpio_led(i);
        pci_unregister_driver(&nas_gpio_pci_driver);
}

module_init(nas_gpio_init);
module_exit(nas_gpio_exit);