2 * Copyright (c) 2012 Qualcomm Atheros, Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/etherdevice.h>
18 #include <linux/if_arp.h>
26 * WMI event receiving - theory of operations
28 * When firmware about to report WMI event, it fills memory area
29 * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for
30 * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler.
32 * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the
33 * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up
34 * and handles events within the @wmi_event_worker. Every event get detached
35 * from list, processed and deleted.
37 * Purpose for this mechanism is to release IRQ thread; otherwise,
38 * if WMI event handling involves another WMI command flow, this 2-nd flow
39 * won't be completed because of blocked IRQ thread.
43 * Addressing - theory of operations
45 * There are several buses present on the WIL6210 card.
46 * Same memory areas are visible at different address on
47 * the different busses. There are 3 main bus masters:
49 * - User CPU (firmware)
52 * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
53 * AHB addresses starting from 0x880000
55 * Internally, firmware uses addresses that allows faster access but
56 * are invisible from the host. To read from these addresses, alternative
57 * AHB address must be used.
60 * Linker address PCI/Host address
61 * 0x880000 .. 0xa80000 2Mb BAR0
62 * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM
63 * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH
67 * @fw_mapping provides memory remapping table
70 u32 from
; /* linker address - from, inclusive */
71 u32 to
; /* linker address - to, exclusive */
72 u32 host
; /* PCI/Host address - BAR0 + 0x880000 */
74 {0x000000, 0x040000, 0x8c0000}, /* FW code RAM 256k */
75 {0x800000, 0x808000, 0x900000}, /* FW data RAM 32k */
76 {0x840000, 0x860000, 0x908000}, /* peripheral data RAM 128k/96k used */
77 {0x880000, 0x88a000, 0x880000}, /* various RGF */
78 {0x8c0000, 0x949000, 0x8c0000}, /* trivial mapping for upper area */
80 * 920000..930000 ucode code RAM
81 * 930000..932000 ucode data RAM
82 * 932000..949000 back-door debug data
87 * return AHB address for given firmware/ucode internal (linker) address
88 * @x - internal address
89 * If address have no valid AHB mapping, return 0
91 static u32
wmi_addr_remap(u32 x
)
95 for (i
= 0; i
< ARRAY_SIZE(fw_mapping
); i
++) {
96 if ((x
>= fw_mapping
[i
].from
) && (x
< fw_mapping
[i
].to
))
97 return x
+ fw_mapping
[i
].host
- fw_mapping
[i
].from
;
104 * Check address validity for WMI buffer; remap if needed
105 * @ptr - internal (linker) fw/ucode address
107 * Valid buffer should be DWORD aligned
109 * return address for accessing buffer from the host;
110 * if buffer is not valid, return NULL.
112 void __iomem
*wmi_buffer(struct wil6210_priv
*wil
, __le32 ptr_
)
115 u32 ptr
= le32_to_cpu(ptr_
);
120 ptr
= wmi_addr_remap(ptr
);
121 if (ptr
< WIL6210_FW_HOST_OFF
)
125 if (off
> WIL6210_MEM_SIZE
- 4)
128 return wil
->csr
+ off
;
132 * Check address validity
134 void __iomem
*wmi_addr(struct wil6210_priv
*wil
, u32 ptr
)
141 if (ptr
< WIL6210_FW_HOST_OFF
)
145 if (off
> WIL6210_MEM_SIZE
- 4)
148 return wil
->csr
+ off
;
151 int wmi_read_hdr(struct wil6210_priv
*wil
, __le32 ptr
,
152 struct wil6210_mbox_hdr
*hdr
)
154 void __iomem
*src
= wmi_buffer(wil
, ptr
);
158 wil_memcpy_fromio_32(hdr
, src
, sizeof(*hdr
));
163 static int __wmi_send(struct wil6210_priv
*wil
, u16 cmdid
, void *buf
, u16 len
)
166 struct wil6210_mbox_hdr hdr
;
167 struct wil6210_mbox_hdr_wmi wmi
;
170 .type
= WIL_MBOX_HDR_TYPE_WMI
,
172 .len
= cpu_to_le16(sizeof(cmd
.wmi
) + len
),
176 .id
= cpu_to_le16(cmdid
),
179 struct wil6210_mbox_ring
*r
= &wil
->mbox_ctl
.tx
;
180 struct wil6210_mbox_ring_desc d_head
;
183 void __iomem
*head
= wmi_addr(wil
, r
->head
);
186 if (sizeof(cmd
) + len
> r
->entry_size
) {
187 wil_err(wil
, "WMI size too large: %d bytes, max is %d\n",
188 (int)(sizeof(cmd
) + len
), r
->entry_size
);
194 if (!test_bit(wil_status_fwready
, &wil
->status
)) {
195 wil_err(wil
, "FW not ready\n");
200 wil_err(wil
, "WMI head is garbage: 0x%08x\n", r
->head
);
203 /* read Tx head till it is not busy */
204 for (retry
= 5; retry
> 0; retry
--) {
205 wil_memcpy_fromio_32(&d_head
, head
, sizeof(d_head
));
206 if (d_head
.sync
== 0)
210 if (d_head
.sync
!= 0) {
211 wil_err(wil
, "WMI head busy\n");
215 next_head
= r
->base
+ ((r
->head
- r
->base
+ sizeof(d_head
)) % r
->size
);
216 wil_dbg_wmi(wil
, "Head 0x%08x -> 0x%08x\n", r
->head
, next_head
);
217 /* wait till FW finish with previous command */
218 for (retry
= 5; retry
> 0; retry
--) {
219 r
->tail
= ioread32(wil
->csr
+ HOST_MBOX
+
220 offsetof(struct wil6210_mbox_ctl
, tx
.tail
));
221 if (next_head
!= r
->tail
)
225 if (next_head
== r
->tail
) {
226 wil_err(wil
, "WMI ring full\n");
229 dst
= wmi_buffer(wil
, d_head
.addr
);
231 wil_err(wil
, "invalid WMI buffer: 0x%08x\n",
232 le32_to_cpu(d_head
.addr
));
235 cmd
.hdr
.seq
= cpu_to_le16(++wil
->wmi_seq
);
237 wil_dbg_wmi(wil
, "WMI command 0x%04x [%d]\n", cmdid
, len
);
238 wil_hex_dump_wmi("Cmd ", DUMP_PREFIX_OFFSET
, 16, 1, &cmd
,
240 wil_hex_dump_wmi("cmd ", DUMP_PREFIX_OFFSET
, 16, 1, buf
,
242 wil_memcpy_toio_32(dst
, &cmd
, sizeof(cmd
));
243 wil_memcpy_toio_32(dst
+ sizeof(cmd
), buf
, len
);
244 /* mark entry as full */
245 iowrite32(1, wil
->csr
+ HOSTADDR(r
->head
) +
246 offsetof(struct wil6210_mbox_ring_desc
, sync
));
247 /* advance next ptr */
248 iowrite32(r
->head
= next_head
, wil
->csr
+ HOST_MBOX
+
249 offsetof(struct wil6210_mbox_ctl
, tx
.head
));
251 trace_wil6210_wmi_cmd(&cmd
.wmi
, buf
, len
);
253 /* interrupt to FW */
254 iowrite32(SW_INT_MBOX
, wil
->csr
+ HOST_SW_INT
);
259 int wmi_send(struct wil6210_priv
*wil
, u16 cmdid
, void *buf
, u16 len
)
263 mutex_lock(&wil
->wmi_mutex
);
264 rc
= __wmi_send(wil
, cmdid
, buf
, len
);
265 mutex_unlock(&wil
->wmi_mutex
);
270 /*=== Event handlers ===*/
271 static void wmi_evt_ready(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
273 struct net_device
*ndev
= wil_to_ndev(wil
);
274 struct wireless_dev
*wdev
= wil
->wdev
;
275 struct wmi_ready_event
*evt
= d
;
276 wil
->fw_version
= le32_to_cpu(evt
->sw_version
);
277 wil
->n_mids
= evt
->numof_additional_mids
;
279 wil_dbg_wmi(wil
, "FW ver. %d; MAC %pM; %d MID's\n", wil
->fw_version
,
280 evt
->mac
, wil
->n_mids
);
282 if (!is_valid_ether_addr(ndev
->dev_addr
)) {
283 memcpy(ndev
->dev_addr
, evt
->mac
, ETH_ALEN
);
284 memcpy(ndev
->perm_addr
, evt
->mac
, ETH_ALEN
);
286 snprintf(wdev
->wiphy
->fw_version
, sizeof(wdev
->wiphy
->fw_version
),
287 "%d", wil
->fw_version
);
290 static void wmi_evt_fw_ready(struct wil6210_priv
*wil
, int id
, void *d
,
293 wil_dbg_wmi(wil
, "WMI: FW ready\n");
295 set_bit(wil_status_fwready
, &wil
->status
);
296 /* reuse wmi_ready for the firmware ready indication */
297 complete(&wil
->wmi_ready
);
300 static void wmi_evt_rx_mgmt(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
302 struct wmi_rx_mgmt_packet_event
*data
= d
;
303 struct wiphy
*wiphy
= wil_to_wiphy(wil
);
304 struct ieee80211_mgmt
*rx_mgmt_frame
=
305 (struct ieee80211_mgmt
*)data
->payload
;
306 int ch_no
= data
->info
.channel
+1;
307 u32 freq
= ieee80211_channel_to_frequency(ch_no
,
308 IEEE80211_BAND_60GHZ
);
309 struct ieee80211_channel
*channel
= ieee80211_get_channel(wiphy
, freq
);
310 /* TODO convert LE to CPU */
311 s32 signal
= 0; /* TODO */
312 __le16 fc
= rx_mgmt_frame
->frame_control
;
313 u32 d_len
= le32_to_cpu(data
->info
.len
);
314 u16 d_status
= le16_to_cpu(data
->info
.status
);
316 wil_dbg_wmi(wil
, "MGMT: channel %d MCS %d SNR %d\n",
317 data
->info
.channel
, data
->info
.mcs
, data
->info
.snr
);
318 wil_dbg_wmi(wil
, "status 0x%04x len %d fc 0x%04x\n", d_status
, d_len
,
320 wil_dbg_wmi(wil
, "qid %d mid %d cid %d\n",
321 data
->info
.qid
, data
->info
.mid
, data
->info
.cid
);
324 wil_err(wil
, "Frame on unsupported channel\n");
328 if (ieee80211_is_beacon(fc
) || ieee80211_is_probe_resp(fc
)) {
329 struct cfg80211_bss
*bss
;
331 bss
= cfg80211_inform_bss_frame(wiphy
, channel
, rx_mgmt_frame
,
332 d_len
, signal
, GFP_KERNEL
);
334 wil_dbg_wmi(wil
, "Added BSS %pM\n",
335 rx_mgmt_frame
->bssid
);
336 cfg80211_put_bss(wiphy
, bss
);
338 wil_err(wil
, "cfg80211_inform_bss() failed\n");
341 cfg80211_rx_mgmt(wil
->wdev
, freq
, signal
,
342 (void *)rx_mgmt_frame
, d_len
, 0, GFP_KERNEL
);
346 static void wmi_evt_scan_complete(struct wil6210_priv
*wil
, int id
,
349 if (wil
->scan_request
) {
350 struct wmi_scan_complete_event
*data
= d
;
351 bool aborted
= (data
->status
!= 0);
353 wil_dbg_wmi(wil
, "SCAN_COMPLETE(0x%08x)\n", data
->status
);
354 cfg80211_scan_done(wil
->scan_request
, aborted
);
355 wil
->scan_request
= NULL
;
357 wil_err(wil
, "SCAN_COMPLETE while not scanning\n");
361 static void wmi_evt_connect(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
363 struct net_device
*ndev
= wil_to_ndev(wil
);
364 struct wireless_dev
*wdev
= wil
->wdev
;
365 struct wmi_connect_event
*evt
= d
;
366 int ch
; /* channel number */
367 struct station_info sinfo
;
368 u8
*assoc_req_ie
, *assoc_resp_ie
;
369 size_t assoc_req_ielen
, assoc_resp_ielen
;
370 /* capinfo(u16) + listen_interval(u16) + IEs */
371 const size_t assoc_req_ie_offset
= sizeof(u16
) * 2;
372 /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */
373 const size_t assoc_resp_ie_offset
= sizeof(u16
) * 3;
375 if (len
< sizeof(*evt
)) {
376 wil_err(wil
, "Connect event too short : %d bytes\n", len
);
379 if (len
!= sizeof(*evt
) + evt
->beacon_ie_len
+ evt
->assoc_req_len
+
380 evt
->assoc_resp_len
) {
382 "Connect event corrupted : %d != %d + %d + %d + %d\n",
383 len
, (int)sizeof(*evt
), evt
->beacon_ie_len
,
384 evt
->assoc_req_len
, evt
->assoc_resp_len
);
387 ch
= evt
->channel
+ 1;
388 wil_dbg_wmi(wil
, "Connect %pM channel [%d] cid %d\n",
389 evt
->bssid
, ch
, evt
->cid
);
390 wil_hex_dump_wmi("connect AI : ", DUMP_PREFIX_OFFSET
, 16, 1,
391 evt
->assoc_info
, len
- sizeof(*evt
), true);
393 /* figure out IE's */
394 assoc_req_ie
= &evt
->assoc_info
[evt
->beacon_ie_len
+
395 assoc_req_ie_offset
];
396 assoc_req_ielen
= evt
->assoc_req_len
- assoc_req_ie_offset
;
397 if (evt
->assoc_req_len
<= assoc_req_ie_offset
) {
402 assoc_resp_ie
= &evt
->assoc_info
[evt
->beacon_ie_len
+
404 assoc_resp_ie_offset
];
405 assoc_resp_ielen
= evt
->assoc_resp_len
- assoc_resp_ie_offset
;
406 if (evt
->assoc_resp_len
<= assoc_resp_ie_offset
) {
407 assoc_resp_ie
= NULL
;
408 assoc_resp_ielen
= 0;
411 if ((wdev
->iftype
== NL80211_IFTYPE_STATION
) ||
412 (wdev
->iftype
== NL80211_IFTYPE_P2P_CLIENT
)) {
413 if (!test_bit(wil_status_fwconnecting
, &wil
->status
)) {
414 wil_err(wil
, "Not in connecting state\n");
417 del_timer_sync(&wil
->connect_timer
);
418 cfg80211_connect_result(ndev
, evt
->bssid
,
419 assoc_req_ie
, assoc_req_ielen
,
420 assoc_resp_ie
, assoc_resp_ielen
,
421 WLAN_STATUS_SUCCESS
, GFP_KERNEL
);
423 } else if ((wdev
->iftype
== NL80211_IFTYPE_AP
) ||
424 (wdev
->iftype
== NL80211_IFTYPE_P2P_GO
)) {
425 memset(&sinfo
, 0, sizeof(sinfo
));
427 sinfo
.generation
= wil
->sinfo_gen
++;
430 sinfo
.assoc_req_ies
= assoc_req_ie
;
431 sinfo
.assoc_req_ies_len
= assoc_req_ielen
;
432 sinfo
.filled
|= STATION_INFO_ASSOC_REQ_IES
;
435 cfg80211_new_sta(ndev
, evt
->bssid
, &sinfo
, GFP_KERNEL
);
437 clear_bit(wil_status_fwconnecting
, &wil
->status
);
438 set_bit(wil_status_fwconnected
, &wil
->status
);
440 /* FIXME FW can transmit only ucast frames to peer */
441 /* FIXME real ring_id instead of hard coded 0 */
442 memcpy(wil
->dst_addr
[0], evt
->bssid
, ETH_ALEN
);
444 wil
->pending_connect_cid
= evt
->cid
;
445 queue_work(wil
->wmi_wq_conn
, &wil
->connect_worker
);
448 static void wmi_evt_disconnect(struct wil6210_priv
*wil
, int id
,
451 struct wmi_disconnect_event
*evt
= d
;
453 wil_dbg_wmi(wil
, "Disconnect %pM reason %d proto %d wmi\n",
455 evt
->protocol_reason_status
, evt
->disconnect_reason
);
459 wil6210_disconnect(wil
, evt
->bssid
);
462 static void wmi_evt_notify(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
464 struct wmi_notify_req_done_event
*evt
= d
;
466 if (len
< sizeof(*evt
)) {
467 wil_err(wil
, "Short NOTIFY event\n");
471 wil
->stats
.tsf
= le64_to_cpu(evt
->tsf
);
472 wil
->stats
.snr
= le32_to_cpu(evt
->snr_val
);
473 wil
->stats
.bf_mcs
= le16_to_cpu(evt
->bf_mcs
);
474 wil
->stats
.my_rx_sector
= le16_to_cpu(evt
->my_rx_sector
);
475 wil
->stats
.my_tx_sector
= le16_to_cpu(evt
->my_tx_sector
);
476 wil
->stats
.peer_rx_sector
= le16_to_cpu(evt
->other_rx_sector
);
477 wil
->stats
.peer_tx_sector
= le16_to_cpu(evt
->other_tx_sector
);
478 wil_dbg_wmi(wil
, "Link status, MCS %d TSF 0x%016llx\n"
479 "BF status 0x%08x SNR 0x%08x\n"
480 "Tx Tpt %d goodput %d Rx goodput %d\n"
481 "Sectors(rx:tx) my %d:%d peer %d:%d\n",
482 wil
->stats
.bf_mcs
, wil
->stats
.tsf
, evt
->status
,
483 wil
->stats
.snr
, le32_to_cpu(evt
->tx_tpt
),
484 le32_to_cpu(evt
->tx_goodput
), le32_to_cpu(evt
->rx_goodput
),
485 wil
->stats
.my_rx_sector
, wil
->stats
.my_tx_sector
,
486 wil
->stats
.peer_rx_sector
, wil
->stats
.peer_tx_sector
);
490 * Firmware reports EAPOL frame using WME event.
491 * Reconstruct Ethernet frame and deliver it via normal Rx
493 static void wmi_evt_eapol_rx(struct wil6210_priv
*wil
, int id
,
496 struct net_device
*ndev
= wil_to_ndev(wil
);
497 struct wmi_eapol_rx_event
*evt
= d
;
498 u16 eapol_len
= le16_to_cpu(evt
->eapol_len
);
499 int sz
= eapol_len
+ ETH_HLEN
;
503 wil_dbg_wmi(wil
, "EAPOL len %d from %pM\n", eapol_len
,
506 if (eapol_len
> 196) { /* TODO: revisit size limit */
507 wil_err(wil
, "EAPOL too large\n");
511 skb
= alloc_skb(sz
, GFP_KERNEL
);
513 wil_err(wil
, "Failed to allocate skb\n");
516 eth
= (struct ethhdr
*)skb_put(skb
, ETH_HLEN
);
517 memcpy(eth
->h_dest
, ndev
->dev_addr
, ETH_ALEN
);
518 memcpy(eth
->h_source
, evt
->src_mac
, ETH_ALEN
);
519 eth
->h_proto
= cpu_to_be16(ETH_P_PAE
);
520 memcpy(skb_put(skb
, eapol_len
), evt
->eapol
, eapol_len
);
521 skb
->protocol
= eth_type_trans(skb
, ndev
);
522 if (likely(netif_rx_ni(skb
) == NET_RX_SUCCESS
)) {
523 ndev
->stats
.rx_packets
++;
524 ndev
->stats
.rx_bytes
+= skb
->len
;
526 ndev
->stats
.rx_dropped
++;
530 static void wmi_evt_linkup(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
532 struct net_device
*ndev
= wil_to_ndev(wil
);
533 struct wmi_data_port_open_event
*evt
= d
;
535 wil_dbg_wmi(wil
, "Link UP for CID %d\n", evt
->cid
);
537 netif_carrier_on(ndev
);
540 static void wmi_evt_linkdown(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
542 struct net_device
*ndev
= wil_to_ndev(wil
);
543 struct wmi_wbe_link_down_event
*evt
= d
;
545 wil_dbg_wmi(wil
, "Link DOWN for CID %d, reason %d\n",
546 evt
->cid
, le32_to_cpu(evt
->reason
));
548 netif_carrier_off(ndev
);
551 static void wmi_evt_ba_status(struct wil6210_priv
*wil
, int id
, void *d
,
554 struct wmi_vring_ba_status_event
*evt
= d
;
556 wil_dbg_wmi(wil
, "BACK[%d] %s {%d} timeout %d\n",
557 evt
->ringid
, evt
->status
? "N/A" : "OK", evt
->agg_wsize
,
558 __le16_to_cpu(evt
->ba_timeout
));
561 static const struct {
563 void (*handler
)(struct wil6210_priv
*wil
, int eventid
,
564 void *data
, int data_len
);
565 } wmi_evt_handlers
[] = {
566 {WMI_READY_EVENTID
, wmi_evt_ready
},
567 {WMI_FW_READY_EVENTID
, wmi_evt_fw_ready
},
568 {WMI_RX_MGMT_PACKET_EVENTID
, wmi_evt_rx_mgmt
},
569 {WMI_SCAN_COMPLETE_EVENTID
, wmi_evt_scan_complete
},
570 {WMI_CONNECT_EVENTID
, wmi_evt_connect
},
571 {WMI_DISCONNECT_EVENTID
, wmi_evt_disconnect
},
572 {WMI_NOTIFY_REQ_DONE_EVENTID
, wmi_evt_notify
},
573 {WMI_EAPOL_RX_EVENTID
, wmi_evt_eapol_rx
},
574 {WMI_DATA_PORT_OPEN_EVENTID
, wmi_evt_linkup
},
575 {WMI_WBE_LINKDOWN_EVENTID
, wmi_evt_linkdown
},
576 {WMI_BA_STATUS_EVENTID
, wmi_evt_ba_status
},
581 * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev
582 * that will be eventually handled by the @wmi_event_worker in the thread
583 * context of thread "wil6210_wmi"
585 void wmi_recv_cmd(struct wil6210_priv
*wil
)
587 struct wil6210_mbox_ring_desc d_tail
;
588 struct wil6210_mbox_hdr hdr
;
589 struct wil6210_mbox_ring
*r
= &wil
->mbox_ctl
.rx
;
590 struct pending_wmi_event
*evt
;
595 if (!test_bit(wil_status_reset_done
, &wil
->status
)) {
596 wil_err(wil
, "Reset not completed\n");
603 r
->head
= ioread32(wil
->csr
+ HOST_MBOX
+
604 offsetof(struct wil6210_mbox_ctl
, rx
.head
));
605 if (r
->tail
== r
->head
)
608 /* read cmd from tail */
609 wil_memcpy_fromio_32(&d_tail
, wil
->csr
+ HOSTADDR(r
->tail
),
610 sizeof(struct wil6210_mbox_ring_desc
));
611 if (d_tail
.sync
== 0) {
612 wil_err(wil
, "Mbox evt not owned by FW?\n");
616 if (0 != wmi_read_hdr(wil
, d_tail
.addr
, &hdr
)) {
617 wil_err(wil
, "Mbox evt at 0x%08x?\n",
618 le32_to_cpu(d_tail
.addr
));
622 len
= le16_to_cpu(hdr
.len
);
623 src
= wmi_buffer(wil
, d_tail
.addr
) +
624 sizeof(struct wil6210_mbox_hdr
);
625 evt
= kmalloc(ALIGN(offsetof(struct pending_wmi_event
,
626 event
.wmi
) + len
, 4),
631 evt
->event
.hdr
= hdr
;
632 cmd
= (void *)&evt
->event
.wmi
;
633 wil_memcpy_fromio_32(cmd
, src
, len
);
634 /* mark entry as empty */
635 iowrite32(0, wil
->csr
+ HOSTADDR(r
->tail
) +
636 offsetof(struct wil6210_mbox_ring_desc
, sync
));
638 wil_dbg_wmi(wil
, "Mbox evt %04x %04x %04x %02x\n",
639 le16_to_cpu(hdr
.seq
), len
, le16_to_cpu(hdr
.type
),
641 if ((hdr
.type
== WIL_MBOX_HDR_TYPE_WMI
) &&
642 (len
>= sizeof(struct wil6210_mbox_hdr_wmi
))) {
643 struct wil6210_mbox_hdr_wmi
*wmi
= &evt
->event
.wmi
;
644 u16 id
= le16_to_cpu(wmi
->id
);
645 u32 tstamp
= le32_to_cpu(wmi
->timestamp
);
646 wil_dbg_wmi(wil
, "WMI event 0x%04x MID %d @%d msec\n",
647 id
, wmi
->mid
, tstamp
);
648 trace_wil6210_wmi_event(wmi
, &wmi
[1],
651 wil_hex_dump_wmi("evt ", DUMP_PREFIX_OFFSET
, 16, 1,
652 &evt
->event
.hdr
, sizeof(hdr
) + len
, true);
655 r
->tail
= r
->base
+ ((r
->tail
- r
->base
+
656 sizeof(struct wil6210_mbox_ring_desc
)) % r
->size
);
657 iowrite32(r
->tail
, wil
->csr
+ HOST_MBOX
+
658 offsetof(struct wil6210_mbox_ctl
, rx
.tail
));
660 /* add to the pending list */
661 spin_lock_irqsave(&wil
->wmi_ev_lock
, flags
);
662 list_add_tail(&evt
->list
, &wil
->pending_wmi_ev
);
663 spin_unlock_irqrestore(&wil
->wmi_ev_lock
, flags
);
665 int q
= queue_work(wil
->wmi_wq
,
666 &wil
->wmi_event_worker
);
667 wil_dbg_wmi(wil
, "queue_work -> %d\n", q
);
672 int wmi_call(struct wil6210_priv
*wil
, u16 cmdid
, void *buf
, u16 len
,
673 u16 reply_id
, void *reply
, u8 reply_size
, int to_msec
)
678 mutex_lock(&wil
->wmi_mutex
);
680 rc
= __wmi_send(wil
, cmdid
, buf
, len
);
684 wil
->reply_id
= reply_id
;
685 wil
->reply_buf
= reply
;
686 wil
->reply_size
= reply_size
;
687 remain
= wait_for_completion_timeout(&wil
->wmi_ready
,
688 msecs_to_jiffies(to_msec
));
690 wil_err(wil
, "wmi_call(0x%04x->0x%04x) timeout %d msec\n",
691 cmdid
, reply_id
, to_msec
);
695 "wmi_call(0x%04x->0x%04x) completed in %d msec\n",
697 to_msec
- jiffies_to_msecs(remain
));
700 wil
->reply_buf
= NULL
;
703 mutex_unlock(&wil
->wmi_mutex
);
708 int wmi_echo(struct wil6210_priv
*wil
)
710 struct wmi_echo_cmd cmd
= {
711 .value
= cpu_to_le32(0x12345678),
714 return wmi_call(wil
, WMI_ECHO_CMDID
, &cmd
, sizeof(cmd
),
715 WMI_ECHO_RSP_EVENTID
, NULL
, 0, 20);
718 int wmi_set_mac_address(struct wil6210_priv
*wil
, void *addr
)
720 struct wmi_set_mac_address_cmd cmd
;
722 memcpy(cmd
.mac
, addr
, ETH_ALEN
);
724 wil_dbg_wmi(wil
, "Set MAC %pM\n", addr
);
726 return wmi_send(wil
, WMI_SET_MAC_ADDRESS_CMDID
, &cmd
, sizeof(cmd
));
729 int wmi_pcp_start(struct wil6210_priv
*wil
, int bi
, u8 wmi_nettype
, u8 chan
)
733 struct wmi_pcp_start_cmd cmd
= {
734 .bcon_interval
= cpu_to_le16(bi
),
735 .network_type
= wmi_nettype
,
736 .disable_sec_offload
= 1,
740 struct wil6210_mbox_hdr_wmi wmi
;
741 struct wmi_pcp_started_event evt
;
744 if (!wil
->secure_pcp
)
748 * Processing time may be huge, in case of secure AP it takes about
749 * 3500ms for FW to start AP
751 rc
= wmi_call(wil
, WMI_PCP_START_CMDID
, &cmd
, sizeof(cmd
),
752 WMI_PCP_STARTED_EVENTID
, &reply
, sizeof(reply
), 5000);
756 if (reply
.evt
.status
!= WMI_FW_STATUS_SUCCESS
)
762 int wmi_pcp_stop(struct wil6210_priv
*wil
)
764 return wmi_call(wil
, WMI_PCP_STOP_CMDID
, NULL
, 0,
765 WMI_PCP_STOPPED_EVENTID
, NULL
, 0, 20);
768 int wmi_set_ssid(struct wil6210_priv
*wil
, u8 ssid_len
, const void *ssid
)
770 struct wmi_set_ssid_cmd cmd
= {
771 .ssid_len
= cpu_to_le32(ssid_len
),
774 if (ssid_len
> sizeof(cmd
.ssid
))
777 memcpy(cmd
.ssid
, ssid
, ssid_len
);
779 return wmi_send(wil
, WMI_SET_SSID_CMDID
, &cmd
, sizeof(cmd
));
782 int wmi_get_ssid(struct wil6210_priv
*wil
, u8
*ssid_len
, void *ssid
)
786 struct wil6210_mbox_hdr_wmi wmi
;
787 struct wmi_set_ssid_cmd cmd
;
789 int len
; /* reply.cmd.ssid_len in CPU order */
791 rc
= wmi_call(wil
, WMI_GET_SSID_CMDID
, NULL
, 0, WMI_GET_SSID_EVENTID
,
792 &reply
, sizeof(reply
), 20);
796 len
= le32_to_cpu(reply
.cmd
.ssid_len
);
797 if (len
> sizeof(reply
.cmd
.ssid
))
801 memcpy(ssid
, reply
.cmd
.ssid
, len
);
806 int wmi_set_channel(struct wil6210_priv
*wil
, int channel
)
808 struct wmi_set_pcp_channel_cmd cmd
= {
809 .channel
= channel
- 1,
812 return wmi_send(wil
, WMI_SET_PCP_CHANNEL_CMDID
, &cmd
, sizeof(cmd
));
815 int wmi_get_channel(struct wil6210_priv
*wil
, int *channel
)
819 struct wil6210_mbox_hdr_wmi wmi
;
820 struct wmi_set_pcp_channel_cmd cmd
;
823 rc
= wmi_call(wil
, WMI_GET_PCP_CHANNEL_CMDID
, NULL
, 0,
824 WMI_GET_PCP_CHANNEL_EVENTID
, &reply
, sizeof(reply
), 20);
828 if (reply
.cmd
.channel
> 3)
831 *channel
= reply
.cmd
.channel
+ 1;
836 int wmi_p2p_cfg(struct wil6210_priv
*wil
, int channel
)
838 struct wmi_p2p_cfg_cmd cmd
= {
839 .discovery_mode
= WMI_DISCOVERY_MODE_NON_OFFLOAD
,
840 .channel
= channel
- 1,
843 return wmi_send(wil
, WMI_P2P_CFG_CMDID
, &cmd
, sizeof(cmd
));
846 int wmi_del_cipher_key(struct wil6210_priv
*wil
, u8 key_index
,
847 const void *mac_addr
)
849 struct wmi_delete_cipher_key_cmd cmd
= {
850 .key_index
= key_index
,
854 memcpy(cmd
.mac
, mac_addr
, WMI_MAC_LEN
);
856 return wmi_send(wil
, WMI_DELETE_CIPHER_KEY_CMDID
, &cmd
, sizeof(cmd
));
859 int wmi_add_cipher_key(struct wil6210_priv
*wil
, u8 key_index
,
860 const void *mac_addr
, int key_len
, const void *key
)
862 struct wmi_add_cipher_key_cmd cmd
= {
863 .key_index
= key_index
,
864 .key_usage
= WMI_KEY_USE_PAIRWISE
,
868 if (!key
|| (key_len
> sizeof(cmd
.key
)))
871 memcpy(cmd
.key
, key
, key_len
);
873 memcpy(cmd
.mac
, mac_addr
, WMI_MAC_LEN
);
875 return wmi_send(wil
, WMI_ADD_CIPHER_KEY_CMDID
, &cmd
, sizeof(cmd
));
878 int wmi_set_ie(struct wil6210_priv
*wil
, u8 type
, u16 ie_len
, const void *ie
)
881 u16 len
= sizeof(struct wmi_set_appie_cmd
) + ie_len
;
882 struct wmi_set_appie_cmd
*cmd
= kzalloc(len
, GFP_KERNEL
);
886 cmd
->mgmt_frm_type
= type
;
887 /* BUG: FW API define ieLen as u8. Will fix FW */
888 cmd
->ie_len
= cpu_to_le16(ie_len
);
889 memcpy(cmd
->ie_info
, ie
, ie_len
);
890 rc
= wmi_send(wil
, WMI_SET_APPIE_CMDID
, cmd
, len
);
896 int wmi_rx_chain_add(struct wil6210_priv
*wil
, struct vring
*vring
)
898 struct wireless_dev
*wdev
= wil
->wdev
;
899 struct net_device
*ndev
= wil_to_ndev(wil
);
900 struct wmi_cfg_rx_chain_cmd cmd
= {
901 .action
= WMI_RX_CHAIN_ADD
,
903 .max_mpdu_size
= cpu_to_le16(RX_BUF_LEN
),
904 .ring_mem_base
= cpu_to_le64(vring
->pa
),
905 .ring_size
= cpu_to_le16(vring
->size
),
907 .mid
= 0, /* TODO - what is it? */
908 .decap_trans_type
= WMI_DECAP_TYPE_802_3
,
911 struct wil6210_mbox_hdr_wmi wmi
;
912 struct wmi_cfg_rx_chain_done_event evt
;
916 if (wdev
->iftype
== NL80211_IFTYPE_MONITOR
) {
917 struct ieee80211_channel
*ch
= wdev
->preset_chandef
.chan
;
919 cmd
.sniffer_cfg
.mode
= cpu_to_le32(WMI_SNIFFER_ON
);
921 cmd
.sniffer_cfg
.channel
= ch
->hw_value
- 1;
922 cmd
.sniffer_cfg
.phy_info_mode
=
923 cpu_to_le32(ndev
->type
== ARPHRD_IEEE80211_RADIOTAP
);
924 cmd
.sniffer_cfg
.phy_support
=
925 cpu_to_le32((wil
->monitor_flags
& MONITOR_FLAG_CONTROL
)
926 ? WMI_SNIFFER_CP
: WMI_SNIFFER_DP
);
928 /* Initialize offload (in non-sniffer mode).
929 * Linux IP stack always calculates IP checksum
930 * HW always calculate TCP/UDP checksum
932 cmd
.l3_l4_ctrl
|= (1 << L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS
);
934 /* typical time for secure PCP is 840ms */
935 rc
= wmi_call(wil
, WMI_CFG_RX_CHAIN_CMDID
, &cmd
, sizeof(cmd
),
936 WMI_CFG_RX_CHAIN_DONE_EVENTID
, &evt
, sizeof(evt
), 2000);
940 vring
->hwtail
= le32_to_cpu(evt
.evt
.rx_ring_tail_ptr
);
942 wil_dbg_misc(wil
, "Rx init: status %d tail 0x%08x\n",
943 le32_to_cpu(evt
.evt
.status
), vring
->hwtail
);
945 if (le32_to_cpu(evt
.evt
.status
) != WMI_CFG_RX_CHAIN_SUCCESS
)
951 int wmi_get_temperature(struct wil6210_priv
*wil
, u32
*t_m
, u32
*t_r
)
954 struct wmi_temp_sense_cmd cmd
= {
955 .measure_marlon_m_en
= cpu_to_le32(!!t_m
),
956 .measure_marlon_r_en
= cpu_to_le32(!!t_r
),
959 struct wil6210_mbox_hdr_wmi wmi
;
960 struct wmi_temp_sense_done_event evt
;
963 rc
= wmi_call(wil
, WMI_TEMP_SENSE_CMDID
, &cmd
, sizeof(cmd
),
964 WMI_TEMP_SENSE_DONE_EVENTID
, &reply
, sizeof(reply
), 100);
969 *t_m
= le32_to_cpu(reply
.evt
.marlon_m_t1000
);
971 *t_r
= le32_to_cpu(reply
.evt
.marlon_r_t1000
);
976 void wmi_event_flush(struct wil6210_priv
*wil
)
978 struct pending_wmi_event
*evt
, *t
;
980 wil_dbg_wmi(wil
, "%s()\n", __func__
);
982 list_for_each_entry_safe(evt
, t
, &wil
->pending_wmi_ev
, list
) {
983 list_del(&evt
->list
);
988 static bool wmi_evt_call_handler(struct wil6210_priv
*wil
, int id
,
993 for (i
= 0; i
< ARRAY_SIZE(wmi_evt_handlers
); i
++) {
994 if (wmi_evt_handlers
[i
].eventid
== id
) {
995 wmi_evt_handlers
[i
].handler(wil
, id
, d
, len
);
1003 static void wmi_event_handle(struct wil6210_priv
*wil
,
1004 struct wil6210_mbox_hdr
*hdr
)
1006 u16 len
= le16_to_cpu(hdr
->len
);
1008 if ((hdr
->type
== WIL_MBOX_HDR_TYPE_WMI
) &&
1009 (len
>= sizeof(struct wil6210_mbox_hdr_wmi
))) {
1010 struct wil6210_mbox_hdr_wmi
*wmi
= (void *)(&hdr
[1]);
1011 void *evt_data
= (void *)(&wmi
[1]);
1012 u16 id
= le16_to_cpu(wmi
->id
);
1013 /* check if someone waits for this event */
1014 if (wil
->reply_id
&& wil
->reply_id
== id
) {
1015 if (wil
->reply_buf
) {
1016 memcpy(wil
->reply_buf
, wmi
,
1017 min(len
, wil
->reply_size
));
1019 wmi_evt_call_handler(wil
, id
, evt_data
,
1020 len
- sizeof(*wmi
));
1022 wil_dbg_wmi(wil
, "Complete WMI 0x%04x\n", id
);
1023 complete(&wil
->wmi_ready
);
1026 /* unsolicited event */
1027 /* search for handler */
1028 if (!wmi_evt_call_handler(wil
, id
, evt_data
,
1029 len
- sizeof(*wmi
))) {
1030 wil_err(wil
, "Unhandled event 0x%04x\n", id
);
1033 wil_err(wil
, "Unknown event type\n");
1034 print_hex_dump(KERN_ERR
, "evt?? ", DUMP_PREFIX_OFFSET
, 16, 1,
1035 hdr
, sizeof(*hdr
) + len
, true);
1040 * Retrieve next WMI event from the pending list
1042 static struct list_head
*next_wmi_ev(struct wil6210_priv
*wil
)
1045 struct list_head
*ret
= NULL
;
1047 spin_lock_irqsave(&wil
->wmi_ev_lock
, flags
);
1049 if (!list_empty(&wil
->pending_wmi_ev
)) {
1050 ret
= wil
->pending_wmi_ev
.next
;
1054 spin_unlock_irqrestore(&wil
->wmi_ev_lock
, flags
);
1060 * Handler for the WMI events
1062 void wmi_event_worker(struct work_struct
*work
)
1064 struct wil6210_priv
*wil
= container_of(work
, struct wil6210_priv
,
1066 struct pending_wmi_event
*evt
;
1067 struct list_head
*lh
;
1069 while ((lh
= next_wmi_ev(wil
)) != NULL
) {
1070 evt
= list_entry(lh
, struct pending_wmi_event
, list
);
1071 wmi_event_handle(wil
, &evt
->event
.hdr
);