drivers/clocksource/i8253.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * i8253 PIT clocksource
   4  */
   5 #include <linux/clockchips.h>
   6 #include <linux/init.h>
   7 #include <linux/io.h>
   8 #include <linux/spinlock.h>
   9 #include <linux/timex.h>
  10 #include <linux/module.h>
  11 #include <linux/i8253.h>
  12 #include <linux/smp.h>
  13
  14 /*
  15  * Protects access to I/O ports
  16  *
  17  * 0040-0043 : timer0, i8253 / i8254
  18  * 0061-0061 : NMI Control Register which contains two speaker control bits.
  19  */
  20 DEFINE_RAW_SPINLOCK(i8253_lock);
  21 EXPORT_SYMBOL(i8253_lock);
  22
  23 #ifdef CONFIG_CLKSRC_I8253
  24 /*
  25  * Since the PIT overflows every tick, its not very useful
  26  * to just read by itself. So use jiffies to emulate a free
  27  * running counter:
  28  */
  29 static u64 i8253_read(struct clocksource *cs)
  30 {
  31         static int old_count;
  32         static u32 old_jifs;
  33         unsigned long flags;
  34         int count;
  35         u32 jifs;
  36
  37         raw_spin_lock_irqsave(&i8253_lock, flags);
  38         /*
  39          * Although our caller may have the read side of jiffies_lock,
  40          * this is now a seqlock, and we are cheating in this routine
  41          * by having side effects on state that we cannot undo if
  42          * there is a collision on the seqlock and our caller has to
  43          * retry.  (Namely, old_jifs and old_count.)  So we must treat
  44          * jiffies as volatile despite the lock.  We read jiffies
  45          * before latching the timer count to guarantee that although
  46          * the jiffies value might be older than the count (that is,
  47          * the counter may underflow between the last point where
  48          * jiffies was incremented and the point where we latch the
  49          * count), it cannot be newer.
  50          */
  51         jifs = jiffies;
  52         outb_p(0x00, PIT_MODE); /* latch the count ASAP */
  53         count = inb_p(PIT_CH0); /* read the latched count */
  54         count |= inb_p(PIT_CH0) << 8;
  55
  56         /* VIA686a test code... reset the latch if count > max + 1 */
  57         if (count > PIT_LATCH) {
  58                 outb_p(0x34, PIT_MODE);
  59                 outb_p(PIT_LATCH & 0xff, PIT_CH0);
  60                 outb_p(PIT_LATCH >> 8, PIT_CH0);
  61                 count = PIT_LATCH - 1;
  62         }
  63
  64         /*
  65          * It's possible for count to appear to go the wrong way for a
  66          * couple of reasons:
  67          *
  68          *  1. The timer counter underflows, but we haven't handled the
  69          *     resulting interrupt and incremented jiffies yet.
  70          *  2. Hardware problem with the timer, not giving us continuous time,
  71          *     the counter does small "jumps" upwards on some Pentium systems,
  72          *     (see c't 95/10 page 335 for Neptun bug.)
  73          *
  74          * Previous attempts to handle these cases intelligently were
  75          * buggy, so we just do the simple thing now.
  76          */
  77         if (count > old_count && jifs == old_jifs)
  78                 count = old_count;
  79
  80         old_count = count;
  81         old_jifs = jifs;
  82
  83         raw_spin_unlock_irqrestore(&i8253_lock, flags);
  84
  85         count = (PIT_LATCH - 1) - count;
  86
  87         return (u64)(jifs * PIT_LATCH) + count;
  88 }
  89
  90 static struct clocksource i8253_cs = {
  91         .name           = "pit",
  92         .rating         = 110,
  93         .read           = i8253_read,
  94         .mask           = CLOCKSOURCE_MASK(32),
  95 };
  96
  97 int __init clocksource_i8253_init(void)
  98 {
  99         return clocksource_register_hz(&i8253_cs, PIT_TICK_RATE);
 100 }
 101 #endif
 102
 103 #ifdef CONFIG_CLKEVT_I8253
 104 static int pit_shutdown(struct clock_event_device *evt)
 105 {
 106         if (!clockevent_state_oneshot(evt) && !clockevent_state_periodic(evt))
 107                 return 0;
 108
 109         raw_spin_lock(&i8253_lock);
 110
 111         outb_p(0x30, PIT_MODE);
 112         outb_p(0, PIT_CH0);
 113         outb_p(0, PIT_CH0);
 114
 115         raw_spin_unlock(&i8253_lock);
 116         return 0;
 117 }
 118
 119 static int pit_set_oneshot(struct clock_event_device *evt)
 120 {
 121         raw_spin_lock(&i8253_lock);
 122         outb_p(0x38, PIT_MODE);
 123         raw_spin_unlock(&i8253_lock);
 124         return 0;
 125 }
 126
 127 static int pit_set_periodic(struct clock_event_device *evt)
 128 {
 129         raw_spin_lock(&i8253_lock);
 130
 131         /* binary, mode 2, LSB/MSB, ch 0 */
 132         outb_p(0x34, PIT_MODE);
 133         outb_p(PIT_LATCH & 0xff, PIT_CH0);      /* LSB */
 134         outb_p(PIT_LATCH >> 8, PIT_CH0);        /* MSB */
 135
 136         raw_spin_unlock(&i8253_lock);
 137         return 0;
 138 }
 139
 140 /*
 141  * Program the next event in oneshot mode
 142  *
 143  * Delta is given in PIT ticks
 144  */
 145 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 146 {
 147         raw_spin_lock(&i8253_lock);
 148         outb_p(delta & 0xff , PIT_CH0); /* LSB */
 149         outb_p(delta >> 8 , PIT_CH0);           /* MSB */
 150         raw_spin_unlock(&i8253_lock);
 151
 152         return 0;
 153 }
 154
 155 /*
 156  * On UP the PIT can serve all of the possible timer functions. On SMP systems
 157  * it can be solely used for the global tick.
 158  */
 159 struct clock_event_device i8253_clockevent = {
 160         .name                   = "pit",
 161         .features               = CLOCK_EVT_FEAT_PERIODIC,
 162         .set_state_shutdown     = pit_shutdown,
 163         .set_state_periodic     = pit_set_periodic,
 164         .set_next_event         = pit_next_event,
 165 };
 166
 167 /*
 168  * Initialize the conversion factor and the min/max deltas of the clock event
 169  * structure and register the clock event source with the framework.
 170  */
 171 void __init clockevent_i8253_init(bool oneshot)
 172 {
 173         if (oneshot) {
 174                 i8253_clockevent.features |= CLOCK_EVT_FEAT_ONESHOT;
 175                 i8253_clockevent.set_state_oneshot = pit_set_oneshot;
 176         }
 177         /*
 178          * Start pit with the boot cpu mask. x86 might make it global
 179          * when it is used as broadcast device later.
 180          */
 181         i8253_clockevent.cpumask = cpumask_of(smp_processor_id());
 182
 183         clockevents_config_and_register(&i8253_clockevent, PIT_TICK_RATE,
 184                                         0xF, 0x7FFF);
 185 }
 186 #endif