ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
[linux/fpc-iii.git] / arch / arm / mach-integrator / integrator_cp.c
blob4eb03ab5cb46813f7658a76977b8f575d012feb3
1 /*
2 * linux/arch/arm/mach-integrator/integrator_cp.c
4 * Copyright (C) 2003 Deep Blue Solutions Ltd
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License.
9 */
10 #include <linux/types.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/list.h>
14 #include <linux/platform_device.h>
15 #include <linux/dma-mapping.h>
16 #include <linux/string.h>
17 #include <linux/sysdev.h>
18 #include <linux/amba/bus.h>
19 #include <linux/amba/kmi.h>
20 #include <linux/amba/clcd.h>
21 #include <linux/amba/mmci.h>
22 #include <linux/io.h>
23 #include <linux/gfp.h>
24 #include <linux/clkdev.h>
25 #include <linux/mtd/physmap.h>
27 #include <mach/hardware.h>
28 #include <mach/platform.h>
29 #include <asm/irq.h>
30 #include <asm/setup.h>
31 #include <asm/mach-types.h>
32 #include <asm/hardware/arm_timer.h>
33 #include <asm/hardware/icst.h>
35 #include <mach/cm.h>
36 #include <mach/lm.h>
38 #include <asm/mach/arch.h>
39 #include <asm/mach/irq.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/time.h>
43 #include <asm/hardware/timer-sp.h>
45 #include <plat/clcd.h>
46 #include <plat/fpga-irq.h>
47 #include <plat/sched_clock.h>
49 #include "common.h"
51 #define INTCP_PA_FLASH_BASE 0x24000000
52 #define INTCP_FLASH_SIZE SZ_32M
54 #define INTCP_PA_CLCD_BASE 0xc0000000
56 #define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40)
57 #define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE)
58 #define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE)
60 #define INTCP_ETH_SIZE 0x10
62 #define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
63 #define INTCP_FLASHPROG 0x04
64 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
65 #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
68 * Logical Physical
69 * f1000000 10000000 Core module registers
70 * f1100000 11000000 System controller registers
71 * f1200000 12000000 EBI registers
72 * f1300000 13000000 Counter/Timer
73 * f1400000 14000000 Interrupt controller
74 * f1600000 16000000 UART 0
75 * f1700000 17000000 UART 1
76 * f1a00000 1a000000 Debug LEDs
77 * fc900000 c9000000 GPIO
78 * fca00000 ca000000 SIC
79 * fcb00000 cb000000 CP system control
82 static struct map_desc intcp_io_desc[] __initdata = {
84 .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
85 .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
86 .length = SZ_4K,
87 .type = MT_DEVICE
88 }, {
89 .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
90 .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
91 .length = SZ_4K,
92 .type = MT_DEVICE
93 }, {
94 .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
95 .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
96 .length = SZ_4K,
97 .type = MT_DEVICE
98 }, {
99 .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
100 .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
101 .length = SZ_4K,
102 .type = MT_DEVICE
103 }, {
104 .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
105 .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
106 .length = SZ_4K,
107 .type = MT_DEVICE
108 }, {
109 .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
110 .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
111 .length = SZ_4K,
112 .type = MT_DEVICE
113 }, {
114 .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
115 .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
116 .length = SZ_4K,
117 .type = MT_DEVICE
118 }, {
119 .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
120 .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
121 .length = SZ_4K,
122 .type = MT_DEVICE
123 }, {
124 .virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
125 .pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
126 .length = SZ_4K,
127 .type = MT_DEVICE
128 }, {
129 .virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
130 .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
131 .length = SZ_4K,
132 .type = MT_DEVICE
133 }, {
134 .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
135 .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
136 .length = SZ_4K,
137 .type = MT_DEVICE
141 static void __init intcp_map_io(void)
143 iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
146 static struct fpga_irq_data cic_irq_data = {
147 .base = INTCP_VA_CIC_BASE,
148 .irq_start = IRQ_CIC_START,
149 .chip.name = "CIC",
152 static struct fpga_irq_data pic_irq_data = {
153 .base = INTCP_VA_PIC_BASE,
154 .irq_start = IRQ_PIC_START,
155 .chip.name = "PIC",
158 static struct fpga_irq_data sic_irq_data = {
159 .base = INTCP_VA_SIC_BASE,
160 .irq_start = IRQ_SIC_START,
161 .chip.name = "SIC",
164 static void __init intcp_init_irq(void)
166 u32 pic_mask, sic_mask;
168 pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
169 pic_mask |= (~((~0u) << (29 - 22))) << 22;
170 sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
173 * Disable all interrupt sources
175 writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
176 writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
177 writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
178 writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
179 writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
180 writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
182 fpga_irq_init(-1, pic_mask, &pic_irq_data);
184 fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)),
185 &cic_irq_data);
187 fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data);
191 * Clock handling
193 #define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
194 #define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
196 static const struct icst_params cp_auxvco_params = {
197 .ref = 24000000,
198 .vco_max = ICST525_VCO_MAX_5V,
199 .vco_min = ICST525_VCO_MIN,
200 .vd_min = 8,
201 .vd_max = 263,
202 .rd_min = 3,
203 .rd_max = 65,
204 .s2div = icst525_s2div,
205 .idx2s = icst525_idx2s,
208 static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
210 u32 val;
212 val = readl(clk->vcoreg) & ~0x7ffff;
213 val |= vco.v | (vco.r << 9) | (vco.s << 16);
215 writel(0xa05f, CM_LOCK);
216 writel(val, clk->vcoreg);
217 writel(0, CM_LOCK);
220 static const struct clk_ops cp_auxclk_ops = {
221 .round = icst_clk_round,
222 .set = icst_clk_set,
223 .setvco = cp_auxvco_set,
226 static struct clk cp_auxclk = {
227 .ops = &cp_auxclk_ops,
228 .params = &cp_auxvco_params,
229 .vcoreg = CM_AUXOSC,
232 static struct clk sp804_clk = {
233 .rate = 1000000,
236 static struct clk_lookup cp_lookups[] = {
237 { /* CLCD */
238 .dev_id = "mb:c0",
239 .clk = &cp_auxclk,
240 }, { /* SP804 timers */
241 .dev_id = "sp804",
242 .clk = &sp804_clk,
247 * Flash handling.
249 static int intcp_flash_init(struct platform_device *dev)
251 u32 val;
253 val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
254 val |= CINTEGRATOR_FLASHPROG_FLWREN;
255 writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
257 return 0;
260 static void intcp_flash_exit(struct platform_device *dev)
262 u32 val;
264 val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
265 val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
266 writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
269 static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
271 u32 val;
273 val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
274 if (on)
275 val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
276 else
277 val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
278 writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
281 static struct physmap_flash_data intcp_flash_data = {
282 .width = 4,
283 .init = intcp_flash_init,
284 .exit = intcp_flash_exit,
285 .set_vpp = intcp_flash_set_vpp,
288 static struct resource intcp_flash_resource = {
289 .start = INTCP_PA_FLASH_BASE,
290 .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
291 .flags = IORESOURCE_MEM,
294 static struct platform_device intcp_flash_device = {
295 .name = "physmap-flash",
296 .id = 0,
297 .dev = {
298 .platform_data = &intcp_flash_data,
300 .num_resources = 1,
301 .resource = &intcp_flash_resource,
304 static struct resource smc91x_resources[] = {
305 [0] = {
306 .start = INTEGRATOR_CP_ETH_BASE,
307 .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
308 .flags = IORESOURCE_MEM,
310 [1] = {
311 .start = IRQ_CP_ETHINT,
312 .end = IRQ_CP_ETHINT,
313 .flags = IORESOURCE_IRQ,
317 static struct platform_device smc91x_device = {
318 .name = "smc91x",
319 .id = 0,
320 .num_resources = ARRAY_SIZE(smc91x_resources),
321 .resource = smc91x_resources,
324 static struct platform_device *intcp_devs[] __initdata = {
325 &intcp_flash_device,
326 &smc91x_device,
330 * It seems that the card insertion interrupt remains active after
331 * we've acknowledged it. We therefore ignore the interrupt, and
332 * rely on reading it from the SIC. This also means that we must
333 * clear the latched interrupt.
335 static unsigned int mmc_status(struct device *dev)
337 unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
338 writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
340 return status & 8;
343 static struct mmci_platform_data mmc_data = {
344 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
345 .status = mmc_status,
346 .gpio_wp = -1,
347 .gpio_cd = -1,
350 static struct amba_device mmc_device = {
351 .dev = {
352 .init_name = "mb:1c",
353 .platform_data = &mmc_data,
355 .res = {
356 .start = INTEGRATOR_CP_MMC_BASE,
357 .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
358 .flags = IORESOURCE_MEM,
360 .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
361 .periphid = 0,
364 static struct amba_device aaci_device = {
365 .dev = {
366 .init_name = "mb:1d",
368 .res = {
369 .start = INTEGRATOR_CP_AACI_BASE,
370 .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
371 .flags = IORESOURCE_MEM,
373 .irq = { IRQ_CP_AACIINT, NO_IRQ },
374 .periphid = 0,
379 * CLCD support
382 * Ensure VGA is selected.
384 static void cp_clcd_enable(struct clcd_fb *fb)
386 struct fb_var_screeninfo *var = &fb->fb.var;
387 u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
389 if (var->bits_per_pixel <= 8 ||
390 (var->bits_per_pixel == 16 && var->green.length == 5))
391 /* Pseudocolor, RGB555, BGR555 */
392 val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
393 else if (fb->fb.var.bits_per_pixel <= 16)
394 /* truecolor RGB565 */
395 val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
396 else
397 val = 0; /* no idea for this, don't trust the docs */
399 cm_control(CM_CTRL_LCDMUXSEL_MASK|
400 CM_CTRL_LCDEN0|
401 CM_CTRL_LCDEN1|
402 CM_CTRL_STATIC1|
403 CM_CTRL_STATIC2|
404 CM_CTRL_STATIC|
405 CM_CTRL_n24BITEN, val);
408 static int cp_clcd_setup(struct clcd_fb *fb)
410 fb->panel = versatile_clcd_get_panel("VGA");
411 if (!fb->panel)
412 return -EINVAL;
414 return versatile_clcd_setup_dma(fb, SZ_1M);
417 static struct clcd_board clcd_data = {
418 .name = "Integrator/CP",
419 .caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
420 .check = clcdfb_check,
421 .decode = clcdfb_decode,
422 .enable = cp_clcd_enable,
423 .setup = cp_clcd_setup,
424 .mmap = versatile_clcd_mmap_dma,
425 .remove = versatile_clcd_remove_dma,
428 static struct amba_device clcd_device = {
429 .dev = {
430 .init_name = "mb:c0",
431 .coherent_dma_mask = ~0,
432 .platform_data = &clcd_data,
434 .res = {
435 .start = INTCP_PA_CLCD_BASE,
436 .end = INTCP_PA_CLCD_BASE + SZ_4K - 1,
437 .flags = IORESOURCE_MEM,
439 .dma_mask = ~0,
440 .irq = { IRQ_CP_CLCDCINT, NO_IRQ },
441 .periphid = 0,
444 static struct amba_device *amba_devs[] __initdata = {
445 &mmc_device,
446 &aaci_device,
447 &clcd_device,
450 #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
452 static void __init intcp_init_early(void)
454 clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
456 integrator_init_early();
458 #ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
459 versatile_sched_clock_init(REFCOUNTER, 24000000);
460 #endif
463 static void __init intcp_init(void)
465 int i;
467 platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
469 for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
470 struct amba_device *d = amba_devs[i];
471 amba_device_register(d, &iomem_resource);
475 #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
476 #define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
477 #define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
479 static void __init intcp_timer_init(void)
481 writel(0, TIMER0_VA_BASE + TIMER_CTRL);
482 writel(0, TIMER1_VA_BASE + TIMER_CTRL);
483 writel(0, TIMER2_VA_BASE + TIMER_CTRL);
485 sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
486 sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
489 static struct sys_timer cp_timer = {
490 .init = intcp_timer_init,
493 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
494 /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
495 .boot_params = 0x00000100,
496 .reserve = integrator_reserve,
497 .map_io = intcp_map_io,
498 .init_early = intcp_init_early,
499 .init_irq = intcp_init_irq,
500 .timer = &cp_timer,
501 .init_machine = intcp_init,
502 MACHINE_END