2 * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
4 * Marvell Orion-VoIP GE Reference Design Setup
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/pci.h>
15 #include <linux/irq.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/mv643xx_eth.h>
18 #include <linux/ethtool.h>
19 #include <linux/i2c.h>
21 #include <asm/mach-types.h>
24 #include <asm/mach/arch.h>
25 #include <asm/mach/pci.h>
26 #include <mach/orion5x.h>
30 /*****************************************************************************
32 ****************************************************************************/
34 * 16M NOR flash Device bus boot chip select
36 #define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000
37 #define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M
40 /*****************************************************************************
41 * 16M NOR Flash on Device bus Boot chip select
42 ****************************************************************************/
43 static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data
= {
47 static struct resource rd88f5181l_ge_nor_boot_flash_resource
= {
48 .flags
= IORESOURCE_MEM
,
49 .start
= RD88F5181L_GE_NOR_BOOT_BASE
,
50 .end
= RD88F5181L_GE_NOR_BOOT_BASE
+
51 RD88F5181L_GE_NOR_BOOT_SIZE
- 1,
54 static struct platform_device rd88f5181l_ge_nor_boot_flash
= {
55 .name
= "physmap-flash",
58 .platform_data
= &rd88f5181l_ge_nor_boot_flash_data
,
61 .resource
= &rd88f5181l_ge_nor_boot_flash_resource
,
65 /*****************************************************************************
67 ****************************************************************************/
68 static unsigned int rd88f5181l_ge_mpp_modes
[] __initdata
= {
73 MPP4_GPIO
, /* PCI_intA */
74 MPP5_GPIO
, /* RTC interrupt */
75 MPP6_PCI_CLK
, /* CPU PCI refclk */
76 MPP7_PCI_CLK
, /* PCI/PCIe refclk */
77 MPP8_GPIO
, /* 88e6131 interrupt */
78 MPP9_GPIO
, /* GE_RXERR */
79 MPP10_GPIO
, /* PCI_intB */
80 MPP11_GPIO
, /* LED2 */
81 MPP12_GIGE
, /* GE_TXD[4] */
82 MPP13_GIGE
, /* GE_TXD[5] */
83 MPP14_GIGE
, /* GE_TXD[6] */
84 MPP15_GIGE
, /* GE_TXD[7] */
85 MPP16_GIGE
, /* GE_RXD[4] */
86 MPP17_GIGE
, /* GE_RXD[5] */
87 MPP18_GIGE
, /* GE_RXD[6] */
88 MPP19_GIGE
, /* GE_RXD[7] */
92 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data
= {
93 .phy_addr
= MV643XX_ETH_PHY_NONE
,
95 .duplex
= DUPLEX_FULL
,
98 static struct dsa_chip_data rd88f5181l_ge_switch_chip_data
= {
99 .port_names
[0] = "lan2",
100 .port_names
[1] = "lan1",
101 .port_names
[2] = "wan",
102 .port_names
[3] = "cpu",
103 .port_names
[5] = "lan4",
104 .port_names
[7] = "lan3",
107 static struct dsa_platform_data rd88f5181l_ge_switch_plat_data
= {
109 .chip
= &rd88f5181l_ge_switch_chip_data
,
112 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc
= {
113 I2C_BOARD_INFO("ds1338", 0x68),
116 static void __init
rd88f5181l_ge_init(void)
119 * Setup basic Orion functions. Need to be called early.
123 orion5x_mpp_conf(rd88f5181l_ge_mpp_modes
);
126 * Configure peripherals.
128 orion5x_ehci0_init();
129 orion5x_eth_init(&rd88f5181l_ge_eth_data
);
130 orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data
,
133 orion5x_uart0_init();
135 orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE
,
136 RD88F5181L_GE_NOR_BOOT_SIZE
);
137 platform_device_register(&rd88f5181l_ge_nor_boot_flash
);
139 i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc
, 1);
143 rd88f5181l_ge_pci_map_irq(struct pci_dev
*dev
, u8 slot
, u8 pin
)
148 * Check for devices with hard-wired IRQs.
150 irq
= orion5x_pci_map_irq(dev
, slot
, pin
);
158 return gpio_to_irq(4);
160 return gpio_to_irq(10);
163 static struct hw_pci rd88f5181l_ge_pci __initdata
= {
165 .swizzle
= pci_std_swizzle
,
166 .setup
= orion5x_pci_sys_setup
,
167 .scan
= orion5x_pci_sys_scan_bus
,
168 .map_irq
= rd88f5181l_ge_pci_map_irq
,
171 static int __init
rd88f5181l_ge_pci_init(void)
173 if (machine_is_rd88f5181l_ge()) {
174 orion5x_pci_set_cardbus_mode();
175 pci_common_init(&rd88f5181l_ge_pci
);
180 subsys_initcall(rd88f5181l_ge_pci_init
);
182 MACHINE_START(RD88F5181L_GE
, "Marvell Orion-VoIP GE Reference Design")
183 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
184 .boot_params
= 0x00000100,
185 .init_machine
= rd88f5181l_ge_init
,
186 .map_io
= orion5x_map_io
,
187 .init_early
= orion5x_init_early
,
188 .init_irq
= orion5x_init_irq
,
189 .timer
= &orion5x_timer
,
190 .fixup
= tag_fixup_mem32
,