ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
[linux/fpc-iii.git] / arch / avr32 / kernel / setup.c
blobbb0974cce4accf3c0a0d01cdfce08d7533d86ab7
1 /*
2 * Copyright (C) 2004-2006 Atmel Corporation
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
9 #include <linux/clk.h>
10 #include <linux/init.h>
11 #include <linux/initrd.h>
12 #include <linux/sched.h>
13 #include <linux/console.h>
14 #include <linux/ioport.h>
15 #include <linux/bootmem.h>
16 #include <linux/fs.h>
17 #include <linux/module.h>
18 #include <linux/pfn.h>
19 #include <linux/root_dev.h>
20 #include <linux/cpu.h>
21 #include <linux/kernel.h>
23 #include <asm/sections.h>
24 #include <asm/processor.h>
25 #include <asm/pgtable.h>
26 #include <asm/setup.h>
27 #include <asm/sysreg.h>
29 #include <mach/board.h>
30 #include <mach/init.h>
32 extern int root_mountflags;
35 * Initialize loops_per_jiffy as 5000000 (500MIPS).
36 * Better make it too large than too small...
38 struct avr32_cpuinfo boot_cpu_data = {
39 .loops_per_jiffy = 5000000
41 EXPORT_SYMBOL(boot_cpu_data);
43 static char __initdata command_line[COMMAND_LINE_SIZE];
46 * Standard memory resources
48 static struct resource __initdata kernel_data = {
49 .name = "Kernel data",
50 .start = 0,
51 .end = 0,
52 .flags = IORESOURCE_MEM,
54 static struct resource __initdata kernel_code = {
55 .name = "Kernel code",
56 .start = 0,
57 .end = 0,
58 .flags = IORESOURCE_MEM,
59 .sibling = &kernel_data,
63 * Available system RAM and reserved regions as singly linked
64 * lists. These lists are traversed using the sibling pointer in
65 * struct resource and are kept sorted at all times.
67 static struct resource *__initdata system_ram;
68 static struct resource *__initdata reserved = &kernel_code;
71 * We need to allocate these before the bootmem allocator is up and
72 * running, so we need this "cache". 32 entries are probably enough
73 * for all but the most insanely complex systems.
75 static struct resource __initdata res_cache[32];
76 static unsigned int __initdata res_cache_next_free;
78 static void __init resource_init(void)
80 struct resource *mem, *res;
81 struct resource *new;
83 kernel_code.start = __pa(init_mm.start_code);
85 for (mem = system_ram; mem; mem = mem->sibling) {
86 new = alloc_bootmem_low(sizeof(struct resource));
87 memcpy(new, mem, sizeof(struct resource));
89 new->sibling = NULL;
90 if (request_resource(&iomem_resource, new))
91 printk(KERN_WARNING "Bad RAM resource %08x-%08x\n",
92 mem->start, mem->end);
95 for (res = reserved; res; res = res->sibling) {
96 new = alloc_bootmem_low(sizeof(struct resource));
97 memcpy(new, res, sizeof(struct resource));
99 new->sibling = NULL;
100 if (insert_resource(&iomem_resource, new))
101 printk(KERN_WARNING
102 "Bad reserved resource %s (%08x-%08x)\n",
103 res->name, res->start, res->end);
107 static void __init
108 add_physical_memory(resource_size_t start, resource_size_t end)
110 struct resource *new, *next, **pprev;
112 for (pprev = &system_ram, next = system_ram; next;
113 pprev = &next->sibling, next = next->sibling) {
114 if (end < next->start)
115 break;
116 if (start <= next->end) {
117 printk(KERN_WARNING
118 "Warning: Physical memory map is broken\n");
119 printk(KERN_WARNING
120 "Warning: %08x-%08x overlaps %08x-%08x\n",
121 start, end, next->start, next->end);
122 return;
126 if (res_cache_next_free >= ARRAY_SIZE(res_cache)) {
127 printk(KERN_WARNING
128 "Warning: Failed to add physical memory %08x-%08x\n",
129 start, end);
130 return;
133 new = &res_cache[res_cache_next_free++];
134 new->start = start;
135 new->end = end;
136 new->name = "System RAM";
137 new->flags = IORESOURCE_MEM;
139 *pprev = new;
142 static int __init
143 add_reserved_region(resource_size_t start, resource_size_t end,
144 const char *name)
146 struct resource *new, *next, **pprev;
148 if (end < start)
149 return -EINVAL;
151 if (res_cache_next_free >= ARRAY_SIZE(res_cache))
152 return -ENOMEM;
154 for (pprev = &reserved, next = reserved; next;
155 pprev = &next->sibling, next = next->sibling) {
156 if (end < next->start)
157 break;
158 if (start <= next->end)
159 return -EBUSY;
162 new = &res_cache[res_cache_next_free++];
163 new->start = start;
164 new->end = end;
165 new->name = name;
166 new->sibling = next;
167 new->flags = IORESOURCE_MEM;
169 *pprev = new;
171 return 0;
174 static unsigned long __init
175 find_free_region(const struct resource *mem, resource_size_t size,
176 resource_size_t align)
178 struct resource *res;
179 unsigned long target;
181 target = ALIGN(mem->start, align);
182 for (res = reserved; res; res = res->sibling) {
183 if ((target + size) <= res->start)
184 break;
185 if (target <= res->end)
186 target = ALIGN(res->end + 1, align);
189 if ((target + size) > (mem->end + 1))
190 return mem->end + 1;
192 return target;
195 static int __init
196 alloc_reserved_region(resource_size_t *start, resource_size_t size,
197 resource_size_t align, const char *name)
199 struct resource *mem;
200 resource_size_t target;
201 int ret;
203 for (mem = system_ram; mem; mem = mem->sibling) {
204 target = find_free_region(mem, size, align);
205 if (target <= mem->end) {
206 ret = add_reserved_region(target, target + size - 1,
207 name);
208 if (!ret)
209 *start = target;
210 return ret;
214 return -ENOMEM;
218 * Early framebuffer allocation. Works as follows:
219 * - If fbmem_size is zero, nothing will be allocated or reserved.
220 * - If fbmem_start is zero when setup_bootmem() is called,
221 * a block of fbmem_size bytes will be reserved before bootmem
222 * initialization. It will be aligned to the largest page size
223 * that fbmem_size is a multiple of.
224 * - If fbmem_start is nonzero, an area of size fbmem_size will be
225 * reserved at the physical address fbmem_start if possible. If
226 * it collides with other reserved memory, a different block of
227 * same size will be allocated, just as if fbmem_start was zero.
229 * Board-specific code may use these variables to set up platform data
230 * for the framebuffer driver if fbmem_size is nonzero.
232 resource_size_t __initdata fbmem_start;
233 resource_size_t __initdata fbmem_size;
236 * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
237 * use as framebuffer.
239 * "fbmem=xxx[kKmM]@yyy[kKmM]" defines a memory region of size xxx and
240 * starting at yyy to be reserved for use as framebuffer.
242 * The kernel won't verify that the memory region starting at yyy
243 * actually contains usable RAM.
245 static int __init early_parse_fbmem(char *p)
247 int ret;
248 unsigned long align;
250 fbmem_size = memparse(p, &p);
251 if (*p == '@') {
252 fbmem_start = memparse(p + 1, &p);
253 ret = add_reserved_region(fbmem_start,
254 fbmem_start + fbmem_size - 1,
255 "Framebuffer");
256 if (ret) {
257 printk(KERN_WARNING
258 "Failed to reserve framebuffer memory\n");
259 fbmem_start = 0;
263 if (!fbmem_start) {
264 if ((fbmem_size & 0x000fffffUL) == 0)
265 align = 0x100000; /* 1 MiB */
266 else if ((fbmem_size & 0x0000ffffUL) == 0)
267 align = 0x10000; /* 64 KiB */
268 else
269 align = 0x1000; /* 4 KiB */
271 ret = alloc_reserved_region(&fbmem_start, fbmem_size,
272 align, "Framebuffer");
273 if (ret) {
274 printk(KERN_WARNING
275 "Failed to allocate framebuffer memory\n");
276 fbmem_size = 0;
277 } else {
278 memset(__va(fbmem_start), 0, fbmem_size);
282 return 0;
284 early_param("fbmem", early_parse_fbmem);
287 * Pick out the memory size. We look for mem=size@start,
288 * where start and size are "size[KkMmGg]"
290 static int __init early_mem(char *p)
292 resource_size_t size, start;
294 start = system_ram->start;
295 size = memparse(p, &p);
296 if (*p == '@')
297 start = memparse(p + 1, &p);
299 system_ram->start = start;
300 system_ram->end = system_ram->start + size - 1;
301 return 0;
303 early_param("mem", early_mem);
305 static int __init parse_tag_core(struct tag *tag)
307 if (tag->hdr.size > 2) {
308 if ((tag->u.core.flags & 1) == 0)
309 root_mountflags &= ~MS_RDONLY;
310 ROOT_DEV = new_decode_dev(tag->u.core.rootdev);
312 return 0;
314 __tagtable(ATAG_CORE, parse_tag_core);
316 static int __init parse_tag_mem(struct tag *tag)
318 unsigned long start, end;
321 * Ignore zero-sized entries. If we're running standalone, the
322 * SDRAM code may emit such entries if something goes
323 * wrong...
325 if (tag->u.mem_range.size == 0)
326 return 0;
328 start = tag->u.mem_range.addr;
329 end = tag->u.mem_range.addr + tag->u.mem_range.size - 1;
331 add_physical_memory(start, end);
332 return 0;
334 __tagtable(ATAG_MEM, parse_tag_mem);
336 static int __init parse_tag_rdimg(struct tag *tag)
338 #ifdef CONFIG_BLK_DEV_INITRD
339 struct tag_mem_range *mem = &tag->u.mem_range;
340 int ret;
342 if (initrd_start) {
343 printk(KERN_WARNING
344 "Warning: Only the first initrd image will be used\n");
345 return 0;
348 ret = add_reserved_region(mem->addr, mem->addr + mem->size - 1,
349 "initrd");
350 if (ret) {
351 printk(KERN_WARNING
352 "Warning: Failed to reserve initrd memory\n");
353 return ret;
356 initrd_start = (unsigned long)__va(mem->addr);
357 initrd_end = initrd_start + mem->size;
358 #else
359 printk(KERN_WARNING "RAM disk image present, but "
360 "no initrd support in kernel, ignoring\n");
361 #endif
363 return 0;
365 __tagtable(ATAG_RDIMG, parse_tag_rdimg);
367 static int __init parse_tag_rsvd_mem(struct tag *tag)
369 struct tag_mem_range *mem = &tag->u.mem_range;
371 return add_reserved_region(mem->addr, mem->addr + mem->size - 1,
372 "Reserved");
374 __tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
376 static int __init parse_tag_cmdline(struct tag *tag)
378 strlcpy(boot_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
379 return 0;
381 __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
383 static int __init parse_tag_clock(struct tag *tag)
386 * We'll figure out the clocks by peeking at the system
387 * manager regs directly.
389 return 0;
391 __tagtable(ATAG_CLOCK, parse_tag_clock);
394 * The board_number correspond to the bd->bi_board_number in U-Boot. This
395 * parameter is only available during initialisation and can be used in some
396 * kind of board identification.
398 u32 __initdata board_number;
400 static int __init parse_tag_boardinfo(struct tag *tag)
402 board_number = tag->u.boardinfo.board_number;
404 return 0;
406 __tagtable(ATAG_BOARDINFO, parse_tag_boardinfo);
409 * Scan the tag table for this tag, and call its parse function. The
410 * tag table is built by the linker from all the __tagtable
411 * declarations.
413 static int __init parse_tag(struct tag *tag)
415 extern struct tagtable __tagtable_begin, __tagtable_end;
416 struct tagtable *t;
418 for (t = &__tagtable_begin; t < &__tagtable_end; t++)
419 if (tag->hdr.tag == t->tag) {
420 t->parse(tag);
421 break;
424 return t < &__tagtable_end;
428 * Parse all tags in the list we got from the boot loader
430 static void __init parse_tags(struct tag *t)
432 for (; t->hdr.tag != ATAG_NONE; t = tag_next(t))
433 if (!parse_tag(t))
434 printk(KERN_WARNING
435 "Ignoring unrecognised tag 0x%08x\n",
436 t->hdr.tag);
440 * Find a free memory region large enough for storing the
441 * bootmem bitmap.
443 static unsigned long __init
444 find_bootmap_pfn(const struct resource *mem)
446 unsigned long bootmap_pages, bootmap_len;
447 unsigned long node_pages = PFN_UP(mem->end - mem->start + 1);
448 unsigned long bootmap_start;
450 bootmap_pages = bootmem_bootmap_pages(node_pages);
451 bootmap_len = bootmap_pages << PAGE_SHIFT;
454 * Find a large enough region without reserved pages for
455 * storing the bootmem bitmap. We can take advantage of the
456 * fact that all lists have been sorted.
458 * We have to check that we don't collide with any reserved
459 * regions, which includes the kernel image and any RAMDISK
460 * images.
462 bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE);
464 return bootmap_start >> PAGE_SHIFT;
467 #define MAX_LOWMEM HIGHMEM_START
468 #define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
470 static void __init setup_bootmem(void)
472 unsigned bootmap_size;
473 unsigned long first_pfn, bootmap_pfn, pages;
474 unsigned long max_pfn, max_low_pfn;
475 unsigned node = 0;
476 struct resource *res;
478 printk(KERN_INFO "Physical memory:\n");
479 for (res = system_ram; res; res = res->sibling)
480 printk(" %08x-%08x\n", res->start, res->end);
481 printk(KERN_INFO "Reserved memory:\n");
482 for (res = reserved; res; res = res->sibling)
483 printk(" %08x-%08x: %s\n",
484 res->start, res->end, res->name);
486 nodes_clear(node_online_map);
488 if (system_ram->sibling)
489 printk(KERN_WARNING "Only using first memory bank\n");
491 for (res = system_ram; res; res = NULL) {
492 first_pfn = PFN_UP(res->start);
493 max_low_pfn = max_pfn = PFN_DOWN(res->end + 1);
494 bootmap_pfn = find_bootmap_pfn(res);
495 if (bootmap_pfn > max_pfn)
496 panic("No space for bootmem bitmap!\n");
498 if (max_low_pfn > MAX_LOWMEM_PFN) {
499 max_low_pfn = MAX_LOWMEM_PFN;
500 #ifndef CONFIG_HIGHMEM
502 * Lowmem is memory that can be addressed
503 * directly through P1/P2
505 printk(KERN_WARNING
506 "Node %u: Only %ld MiB of memory will be used.\n",
507 node, MAX_LOWMEM >> 20);
508 printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
509 #else
510 #error HIGHMEM is not supported by AVR32 yet
511 #endif
514 /* Initialize the boot-time allocator with low memory only. */
515 bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
516 first_pfn, max_low_pfn);
519 * Register fully available RAM pages with the bootmem
520 * allocator.
522 pages = max_low_pfn - first_pfn;
523 free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
524 PFN_PHYS(pages));
526 /* Reserve space for the bootmem bitmap... */
527 reserve_bootmem_node(NODE_DATA(node),
528 PFN_PHYS(bootmap_pfn),
529 bootmap_size,
530 BOOTMEM_DEFAULT);
532 /* ...and any other reserved regions. */
533 for (res = reserved; res; res = res->sibling) {
534 if (res->start > PFN_PHYS(max_pfn))
535 break;
538 * resource_init will complain about partial
539 * overlaps, so we'll just ignore such
540 * resources for now.
542 if (res->start >= PFN_PHYS(first_pfn)
543 && res->end < PFN_PHYS(max_pfn))
544 reserve_bootmem_node(
545 NODE_DATA(node), res->start,
546 res->end - res->start + 1,
547 BOOTMEM_DEFAULT);
550 node_set_online(node);
554 void __init setup_arch (char **cmdline_p)
556 struct clk *cpu_clk;
558 init_mm.start_code = (unsigned long)_text;
559 init_mm.end_code = (unsigned long)_etext;
560 init_mm.end_data = (unsigned long)_edata;
561 init_mm.brk = (unsigned long)_end;
564 * Include .init section to make allocations easier. It will
565 * be removed before the resource is actually requested.
567 kernel_code.start = __pa(__init_begin);
568 kernel_code.end = __pa(init_mm.end_code - 1);
569 kernel_data.start = __pa(init_mm.end_code);
570 kernel_data.end = __pa(init_mm.brk - 1);
572 parse_tags(bootloader_tags);
574 setup_processor();
575 setup_platform();
576 setup_board();
578 cpu_clk = clk_get(NULL, "cpu");
579 if (IS_ERR(cpu_clk)) {
580 printk(KERN_WARNING "Warning: Unable to get CPU clock\n");
581 } else {
582 unsigned long cpu_hz = clk_get_rate(cpu_clk);
585 * Well, duh, but it's probably a good idea to
586 * increment the use count.
588 clk_enable(cpu_clk);
590 boot_cpu_data.clk = cpu_clk;
591 boot_cpu_data.loops_per_jiffy = cpu_hz * 4;
592 printk("CPU: Running at %lu.%03lu MHz\n",
593 ((cpu_hz + 500) / 1000) / 1000,
594 ((cpu_hz + 500) / 1000) % 1000);
597 strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
598 *cmdline_p = command_line;
599 parse_early_param();
601 setup_bootmem();
603 #ifdef CONFIG_VT
604 conswitchp = &dummy_con;
605 #endif
607 paging_init();
608 resource_init();