arch/x86/kernel/irqinit.c

   1 #include <linux/linkage.h>
   2 #include <linux/errno.h>
   3 #include <linux/signal.h>
   4 #include <linux/sched.h>
   5 #include <linux/ioport.h>
   6 #include <linux/interrupt.h>
   7 #include <linux/timex.h>
   8 #include <linux/random.h>
   9 #include <linux/kprobes.h>
  10 #include <linux/init.h>
  11 #include <linux/kernel_stat.h>
  12 #include <linux/sysdev.h>
  13 #include <linux/bitops.h>
  14 #include <linux/acpi.h>
  15 #include <linux/io.h>
  16 #include <linux/delay.h>
  17
  18 #include <asm/atomic.h>
  19 #include <asm/system.h>
  20 #include <asm/timer.h>
  21 #include <asm/hw_irq.h>
  22 #include <asm/pgtable.h>
  23 #include <asm/desc.h>
  24 #include <asm/apic.h>
  25 #include <asm/setup.h>
  26 #include <asm/i8259.h>
  27 #include <asm/traps.h>
  28 #include <asm/prom.h>
  29
  30 /*
  31  * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
  32  * (these are usually mapped to vectors 0x30-0x3f)
  33  */
  34
  35 /*
  36  * The IO-APIC gives us many more interrupt sources. Most of these
  37  * are unused but an SMP system is supposed to have enough memory ...
  38  * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
  39  * across the spectrum, so we really want to be prepared to get all
  40  * of these. Plus, more powerful systems might have more than 64
  41  * IO-APIC registers.
  42  *
  43  * (these are usually mapped into the 0x30-0xff vector range)
  44  */
  45
  46 #ifdef CONFIG_X86_32
  47 /*
  48  * Note that on a 486, we don't want to do a SIGFPE on an irq13
  49  * as the irq is unreliable, and exception 16 works correctly
  50  * (ie as explained in the intel literature). On a 386, you
  51  * can't use exception 16 due to bad IBM design, so we have to
  52  * rely on the less exact irq13.
  53  *
  54  * Careful.. Not only is IRQ13 unreliable, but it is also
  55  * leads to races. IBM designers who came up with it should
  56  * be shot.
  57  */
  58
  59 static irqreturn_t math_error_irq(int cpl, void *dev_id)
  60 {
  61         outb(0, 0xF0);
  62         if (ignore_fpu_irq || !boot_cpu_data.hard_math)
  63                 return IRQ_NONE;
  64         math_error(get_irq_regs(), 0, 16);
  65         return IRQ_HANDLED;
  66 }
  67
  68 /*
  69  * New motherboards sometimes make IRQ 13 be a PCI interrupt,
  70  * so allow interrupt sharing.
  71  */
  72 static struct irqaction fpu_irq = {
  73         .handler = math_error_irq,
  74         .name = "fpu",
  75         .flags = IRQF_NO_THREAD,
  76 };
  77 #endif
  78
  79 /*
  80  * IRQ2 is cascade interrupt to second interrupt controller
  81  */
  82 static struct irqaction irq2 = {
  83         .handler = no_action,
  84         .name = "cascade",
  85         .flags = IRQF_NO_THREAD,
  86 };
  87
  88 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
  89         [0 ... NR_VECTORS - 1] = -1,
  90 };
  91
  92 int vector_used_by_percpu_irq(unsigned int vector)
  93 {
  94         int cpu;
  95
  96         for_each_online_cpu(cpu) {
  97                 if (per_cpu(vector_irq, cpu)[vector] != -1)
  98                         return 1;
  99         }
 100
 101         return 0;
 102 }
 103
 104 void __init init_ISA_irqs(void)
 105 {
 106         struct irq_chip *chip = legacy_pic->chip;
 107         const char *name = chip->name;
 108         int i;
 109
 110 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 111         init_bsp_APIC();
 112 #endif
 113         legacy_pic->init(0);
 114
 115         for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
 116                 irq_set_chip_and_handler_name(i, chip, handle_level_irq, name);
 117 }
 118
 119 void __init init_IRQ(void)
 120 {
 121         int i;
 122
 123         /*
 124          * We probably need a better place for this, but it works for
 125          * now ...
 126          */
 127         x86_add_irq_domains();
 128
 129         /*
 130          * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
 131          * If these IRQ's are handled by legacy interrupt-controllers like PIC,
 132          * then this configuration will likely be static after the boot. If
 133          * these IRQ's are handled by more mordern controllers like IO-APIC,
 134          * then this vector space can be freed and re-used dynamically as the
 135          * irq's migrate etc.
 136          */
 137         for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
 138                 per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
 139
 140         x86_init.irqs.intr_init();
 141 }
 142
 143 /*
 144  * Setup the vector to irq mappings.
 145  */
 146 void setup_vector_irq(int cpu)
 147 {
 148 #ifndef CONFIG_X86_IO_APIC
 149         int irq;
 150
 151         /*
 152          * On most of the platforms, legacy PIC delivers the interrupts on the
 153          * boot cpu. But there are certain platforms where PIC interrupts are
 154          * delivered to multiple cpu's. If the legacy IRQ is handled by the
 155          * legacy PIC, for the new cpu that is coming online, setup the static
 156          * legacy vector to irq mapping:
 157          */
 158         for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
 159                 per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
 160 #endif
 161
 162         __setup_vector_irq(cpu);
 163 }
 164
 165 static void __init smp_intr_init(void)
 166 {
 167 #ifdef CONFIG_SMP
 168 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 169         /*
 170          * The reschedule interrupt is a CPU-to-CPU reschedule-helper
 171          * IPI, driven by wakeup.
 172          */
 173         alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
 174
 175         /* IPIs for invalidation */
 176 #define ALLOC_INVTLB_VEC(NR) \
 177         alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+NR, \
 178                 invalidate_interrupt##NR)
 179
 180         switch (NUM_INVALIDATE_TLB_VECTORS) {
 181         default:
 182                 ALLOC_INVTLB_VEC(31);
 183         case 31:
 184                 ALLOC_INVTLB_VEC(30);
 185         case 30:
 186                 ALLOC_INVTLB_VEC(29);
 187         case 29:
 188                 ALLOC_INVTLB_VEC(28);
 189         case 28:
 190                 ALLOC_INVTLB_VEC(27);
 191         case 27:
 192                 ALLOC_INVTLB_VEC(26);
 193         case 26:
 194                 ALLOC_INVTLB_VEC(25);
 195         case 25:
 196                 ALLOC_INVTLB_VEC(24);
 197         case 24:
 198                 ALLOC_INVTLB_VEC(23);
 199         case 23:
 200                 ALLOC_INVTLB_VEC(22);
 201         case 22:
 202                 ALLOC_INVTLB_VEC(21);
 203         case 21:
 204                 ALLOC_INVTLB_VEC(20);
 205         case 20:
 206                 ALLOC_INVTLB_VEC(19);
 207         case 19:
 208                 ALLOC_INVTLB_VEC(18);
 209         case 18:
 210                 ALLOC_INVTLB_VEC(17);
 211         case 17:
 212                 ALLOC_INVTLB_VEC(16);
 213         case 16:
 214                 ALLOC_INVTLB_VEC(15);
 215         case 15:
 216                 ALLOC_INVTLB_VEC(14);
 217         case 14:
 218                 ALLOC_INVTLB_VEC(13);
 219         case 13:
 220                 ALLOC_INVTLB_VEC(12);
 221         case 12:
 222                 ALLOC_INVTLB_VEC(11);
 223         case 11:
 224                 ALLOC_INVTLB_VEC(10);
 225         case 10:
 226                 ALLOC_INVTLB_VEC(9);
 227         case 9:
 228                 ALLOC_INVTLB_VEC(8);
 229         case 8:
 230                 ALLOC_INVTLB_VEC(7);
 231         case 7:
 232                 ALLOC_INVTLB_VEC(6);
 233         case 6:
 234                 ALLOC_INVTLB_VEC(5);
 235         case 5:
 236                 ALLOC_INVTLB_VEC(4);
 237         case 4:
 238                 ALLOC_INVTLB_VEC(3);
 239         case 3:
 240                 ALLOC_INVTLB_VEC(2);
 241         case 2:
 242                 ALLOC_INVTLB_VEC(1);
 243         case 1:
 244                 ALLOC_INVTLB_VEC(0);
 245                 break;
 246         }
 247
 248         /* IPI for generic function call */
 249         alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
 250
 251         /* IPI for generic single function call */
 252         alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
 253                         call_function_single_interrupt);
 254
 255         /* Low priority IPI to cleanup after moving an irq */
 256         set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 257         set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
 258
 259         /* IPI used for rebooting/stopping */
 260         alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
 261 #endif
 262 #endif /* CONFIG_SMP */
 263 }
 264
 265 static void __init apic_intr_init(void)
 266 {
 267         smp_intr_init();
 268
 269 #ifdef CONFIG_X86_THERMAL_VECTOR
 270         alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 271 #endif
 272 #ifdef CONFIG_X86_MCE_THRESHOLD
 273         alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 274 #endif
 275 #if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_LOCAL_APIC)
 276         alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt);
 277 #endif
 278
 279 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 280         /* self generated IPI for local APIC timer */
 281         alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 282
 283         /* IPI for X86 platform specific use */
 284         alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
 285
 286         /* IPI vectors for APIC spurious and error interrupts */
 287         alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
 288         alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
 289
 290         /* IRQ work interrupts: */
 291 # ifdef CONFIG_IRQ_WORK
 292         alloc_intr_gate(IRQ_WORK_VECTOR, irq_work_interrupt);
 293 # endif
 294
 295 #endif
 296 }
 297
 298 void __init native_init_IRQ(void)
 299 {
 300         int i;
 301
 302         /* Execute any quirks before the call gates are initialised: */
 303         x86_init.irqs.pre_vector_init();
 304
 305         apic_intr_init();
 306
 307         /*
 308          * Cover the whole vector space, no vector can escape
 309          * us. (some of these will be overridden and become
 310          * 'special' SMP interrupts)
 311          */
 312         for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
 313                 /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
 314                 if (!test_bit(i, used_vectors))
 315                         set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
 316         }
 317
 318         if (!acpi_ioapic && !of_ioapic)
 319                 setup_irq(2, &irq2);
 320
 321 #ifdef CONFIG_X86_32
 322         /*
 323          * External FPU? Set up irq13 if so, for
 324          * original braindamaged IBM FERR coupling.
 325          */
 326         if (boot_cpu_data.hard_math && !cpu_has_fpu)
 327                 setup_irq(FPU_IRQ, &fpu_irq);
 328
 329         irq_ctx_init(smp_processor_id());
 330 #endif
 331 }