ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
[linux/fpc-iii.git] / arch / x86 / mm / srat.c
blob7efd0c615d58d9189c723fdde0e52838a320a6a3
1 /*
2 * ACPI 3.0 based NUMA setup
3 * Copyright 2004 Andi Kleen, SuSE Labs.
5 * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
7 * Called from acpi_numa_init while reading the SRAT and SLIT tables.
8 * Assumes all memory regions belonging to a single proximity domain
9 * are in one chunk. Holes between them will be included in the node.
12 #include <linux/kernel.h>
13 #include <linux/acpi.h>
14 #include <linux/mmzone.h>
15 #include <linux/bitmap.h>
16 #include <linux/module.h>
17 #include <linux/topology.h>
18 #include <linux/bootmem.h>
19 #include <linux/memblock.h>
20 #include <linux/mm.h>
21 #include <asm/proto.h>
22 #include <asm/numa.h>
23 #include <asm/e820.h>
24 #include <asm/apic.h>
25 #include <asm/uv/uv.h>
27 int acpi_numa __initdata;
29 static __init int setup_node(int pxm)
31 return acpi_map_pxm_to_node(pxm);
34 static __init void bad_srat(void)
36 printk(KERN_ERR "SRAT: SRAT not used.\n");
37 acpi_numa = -1;
40 static __init inline int srat_disabled(void)
42 return acpi_numa < 0;
45 /* Callback for SLIT parsing */
46 void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
48 int i, j;
50 for (i = 0; i < slit->locality_count; i++)
51 for (j = 0; j < slit->locality_count; j++)
52 numa_set_distance(pxm_to_node(i), pxm_to_node(j),
53 slit->entry[slit->locality_count * i + j]);
56 /* Callback for Proximity Domain -> x2APIC mapping */
57 void __init
58 acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
60 int pxm, node;
61 int apic_id;
63 if (srat_disabled())
64 return;
65 if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
66 bad_srat();
67 return;
69 if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
70 return;
71 pxm = pa->proximity_domain;
72 node = setup_node(pxm);
73 if (node < 0) {
74 printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
75 bad_srat();
76 return;
79 apic_id = pa->apic_id;
80 if (apic_id >= MAX_LOCAL_APIC) {
81 printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
82 return;
84 set_apicid_to_node(apic_id, node);
85 node_set(node, numa_nodes_parsed);
86 acpi_numa = 1;
87 printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
88 pxm, apic_id, node);
91 /* Callback for Proximity Domain -> LAPIC mapping */
92 void __init
93 acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
95 int pxm, node;
96 int apic_id;
98 if (srat_disabled())
99 return;
100 if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
101 bad_srat();
102 return;
104 if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
105 return;
106 pxm = pa->proximity_domain_lo;
107 if (acpi_srat_revision >= 2)
108 pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8;
109 node = setup_node(pxm);
110 if (node < 0) {
111 printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
112 bad_srat();
113 return;
116 if (get_uv_system_type() >= UV_X2APIC)
117 apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
118 else
119 apic_id = pa->apic_id;
121 if (apic_id >= MAX_LOCAL_APIC) {
122 printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
123 return;
126 set_apicid_to_node(apic_id, node);
127 node_set(node, numa_nodes_parsed);
128 acpi_numa = 1;
129 printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
130 pxm, apic_id, node);
133 #ifdef CONFIG_MEMORY_HOTPLUG
134 static inline int save_add_info(void) {return 1;}
135 #else
136 static inline int save_add_info(void) {return 0;}
137 #endif
139 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
140 void __init
141 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
143 u64 start, end;
144 int node, pxm;
146 if (srat_disabled())
147 return;
148 if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
149 bad_srat();
150 return;
152 if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
153 return;
155 if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
156 return;
157 start = ma->base_address;
158 end = start + ma->length;
159 pxm = ma->proximity_domain;
160 if (acpi_srat_revision <= 1)
161 pxm &= 0xff;
162 node = setup_node(pxm);
163 if (node < 0) {
164 printk(KERN_ERR "SRAT: Too many proximity domains.\n");
165 bad_srat();
166 return;
169 if (numa_add_memblk(node, start, end) < 0) {
170 bad_srat();
171 return;
174 printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
175 start, end);
178 void __init acpi_numa_arch_fixup(void) {}
180 int __init x86_acpi_numa_init(void)
182 int ret;
184 ret = acpi_numa_init();
185 if (ret < 0)
186 return ret;
187 return srat_disabled() ? -EINVAL : 0;