drivers/net/wireless/iwlwifi/iwl-fw-file.h

   1 /******************************************************************************
   2  *
   3  * This file is provided under a dual BSD/GPLv2 license.  When using or
   4  * redistributing this file, you may do so under either license.
   5  *
   6  * GPL LICENSE SUMMARY
   7  *
   8  * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
   9  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of version 2 of the GNU General Public License as
  13  * published by the Free Software Foundation.
  14  *
  15  * This program is distributed in the hope that it will be useful, but
  16  * WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18  * General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  23  * USA
  24  *
  25  * The full GNU General Public License is included in this distribution
  26  * in the file called COPYING.
  27  *
  28  * Contact Information:
  29  *  Intel Linux Wireless <ilw@linux.intel.com>
  30  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  31  *
  32  * BSD LICENSE
  33  *
  34  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
  35  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
  36  * All rights reserved.
  37  *
  38  * Redistribution and use in source and binary forms, with or without
  39  * modification, are permitted provided that the following conditions
  40  * are met:
  41  *
  42  *  * Redistributions of source code must retain the above copyright
  43  *    notice, this list of conditions and the following disclaimer.
  44  *  * Redistributions in binary form must reproduce the above copyright
  45  *    notice, this list of conditions and the following disclaimer in
  46  *    the documentation and/or other materials provided with the
  47  *    distribution.
  48  *  * Neither the name Intel Corporation nor the names of its
  49  *    contributors may be used to endorse or promote products derived
  50  *    from this software without specific prior written permission.
  51  *
  52  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  53  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  54  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  55  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  56  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  57  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  58  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  59  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  60  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  61  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  62  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  63  *****************************************************************************/
  64
  65 #ifndef __iwl_fw_file_h__
  66 #define __iwl_fw_file_h__
  67
  68 #include <linux/netdevice.h>
  69 #include <linux/nl80211.h>
  70
  71 /* v1/v2 uCode file layout */
  72 struct iwl_ucode_header {
  73         __le32 ver;     /* major/minor/API/serial */
  74         union {
  75                 struct {
  76                         __le32 inst_size;       /* bytes of runtime code */
  77                         __le32 data_size;       /* bytes of runtime data */
  78                         __le32 init_size;       /* bytes of init code */
  79                         __le32 init_data_size;  /* bytes of init data */
  80                         __le32 boot_size;       /* bytes of bootstrap code */
  81                         u8 data[0];             /* in same order as sizes */
  82                 } v1;
  83                 struct {
  84                         __le32 build;           /* build number */
  85                         __le32 inst_size;       /* bytes of runtime code */
  86                         __le32 data_size;       /* bytes of runtime data */
  87                         __le32 init_size;       /* bytes of init code */
  88                         __le32 init_data_size;  /* bytes of init data */
  89                         __le32 boot_size;       /* bytes of bootstrap code */
  90                         u8 data[0];             /* in same order as sizes */
  91                 } v2;
  92         } u;
  93 };
  94
  95 /*
  96  * new TLV uCode file layout
  97  *
  98  * The new TLV file format contains TLVs, that each specify
  99  * some piece of data.
 100  */
 101
 102 enum iwl_ucode_tlv_type {
 103         IWL_UCODE_TLV_INVALID           = 0, /* unused */
 104         IWL_UCODE_TLV_INST              = 1,
 105         IWL_UCODE_TLV_DATA              = 2,
 106         IWL_UCODE_TLV_INIT              = 3,
 107         IWL_UCODE_TLV_INIT_DATA         = 4,
 108         IWL_UCODE_TLV_BOOT              = 5,
 109         IWL_UCODE_TLV_PROBE_MAX_LEN     = 6, /* a u32 value */
 110         IWL_UCODE_TLV_PAN               = 7,
 111         IWL_UCODE_TLV_RUNT_EVTLOG_PTR   = 8,
 112         IWL_UCODE_TLV_RUNT_EVTLOG_SIZE  = 9,
 113         IWL_UCODE_TLV_RUNT_ERRLOG_PTR   = 10,
 114         IWL_UCODE_TLV_INIT_EVTLOG_PTR   = 11,
 115         IWL_UCODE_TLV_INIT_EVTLOG_SIZE  = 12,
 116         IWL_UCODE_TLV_INIT_ERRLOG_PTR   = 13,
 117         IWL_UCODE_TLV_ENHANCE_SENS_TBL  = 14,
 118         IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
 119         IWL_UCODE_TLV_WOWLAN_INST       = 16,
 120         IWL_UCODE_TLV_WOWLAN_DATA       = 17,
 121         IWL_UCODE_TLV_FLAGS             = 18,
 122         IWL_UCODE_TLV_SEC_RT            = 19,
 123         IWL_UCODE_TLV_SEC_INIT          = 20,
 124         IWL_UCODE_TLV_SEC_WOWLAN        = 21,
 125         IWL_UCODE_TLV_DEF_CALIB         = 22,
 126         IWL_UCODE_TLV_PHY_SKU           = 23,
 127         IWL_UCODE_TLV_SECURE_SEC_RT     = 24,
 128         IWL_UCODE_TLV_SECURE_SEC_INIT   = 25,
 129         IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
 130         IWL_UCODE_TLV_NUM_OF_CPU        = 27,
 131         IWL_UCODE_TLV_CSCHEME           = 28,
 132         IWL_UCODE_TLV_API_CHANGES_SET   = 29,
 133         IWL_UCODE_TLV_ENABLED_CAPABILITIES      = 30,
 134         IWL_UCODE_TLV_N_SCAN_CHANNELS           = 31,
 135         IWL_UCODE_TLV_PAGING            = 32,
 136         IWL_UCODE_TLV_SEC_RT_USNIFFER   = 34,
 137         IWL_UCODE_TLV_SDIO_ADMA_ADDR    = 35,
 138         IWL_UCODE_TLV_FW_VERSION        = 36,
 139         IWL_UCODE_TLV_FW_DBG_DEST       = 38,
 140         IWL_UCODE_TLV_FW_DBG_CONF       = 39,
 141         IWL_UCODE_TLV_FW_DBG_TRIGGER    = 40,
 142         IWL_UCODE_TLV_FW_GSCAN_CAPA     = 50,
 143 };
 144
 145 struct iwl_ucode_tlv {
 146         __le32 type;            /* see above */
 147         __le32 length;          /* not including type/length fields */
 148         u8 data[0];
 149 };
 150
 151 #define IWL_TLV_UCODE_MAGIC             0x0a4c5749
 152 #define FW_VER_HUMAN_READABLE_SZ        64
 153
 154 struct iwl_tlv_ucode_header {
 155         /*
 156          * The TLV style ucode header is distinguished from
 157          * the v1/v2 style header by first four bytes being
 158          * zero, as such is an invalid combination of
 159          * major/minor/API/serial versions.
 160          */
 161         __le32 zero;
 162         __le32 magic;
 163         u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
 164         /* major/minor/API/serial or major in new format */
 165         __le32 ver;
 166         __le32 build;
 167         __le64 ignore;
 168         /*
 169          * The data contained herein has a TLV layout,
 170          * see above for the TLV header and types.
 171          * Note that each TLV is padded to a length
 172          * that is a multiple of 4 for alignment.
 173          */
 174         u8 data[0];
 175 };
 176
 177 /*
 178  * ucode TLVs
 179  *
 180  * ability to get extension for: flags & capabilities from ucode binaries files
 181  */
 182 struct iwl_ucode_api {
 183         __le32 api_index;
 184         __le32 api_flags;
 185 } __packed;
 186
 187 struct iwl_ucode_capa {
 188         __le32 api_index;
 189         __le32 api_capa;
 190 } __packed;
 191
 192 /**
 193  * enum iwl_ucode_tlv_flag - ucode API flags
 194  * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
 195  *      was a separate TLV but moved here to save space.
 196  * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
 197  *      treats good CRC threshold as a boolean
 198  * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
 199  * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
 200  * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
 201  * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
 202  * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
 203  *      offload profile config command.
 204  * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
 205  *      (rather than two) IPv6 addresses
 206  * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
 207  *      from the probe request template.
 208  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
 209  * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
 210  * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
 211  * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
 212  *      P2P client interfaces simultaneously if they are in different bindings.
 213  * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
 214  *      P2P client interfaces simultaneously if they are in same bindings.
 215  * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
 216  * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
 217  * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
 218  * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
 219  * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
 220  */
 221 enum iwl_ucode_tlv_flag {
 222         IWL_UCODE_TLV_FLAGS_PAN                 = BIT(0),
 223         IWL_UCODE_TLV_FLAGS_NEWSCAN             = BIT(1),
 224         IWL_UCODE_TLV_FLAGS_MFP                 = BIT(2),
 225         IWL_UCODE_TLV_FLAGS_P2P                 = BIT(3),
 226         IWL_UCODE_TLV_FLAGS_DW_BC_TABLE         = BIT(4),
 227         IWL_UCODE_TLV_FLAGS_SHORT_BL            = BIT(7),
 228         IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS     = BIT(10),
 229         IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID       = BIT(12),
 230         IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL    = BIT(15),
 231         IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE    = BIT(16),
 232         IWL_UCODE_TLV_FLAGS_P2P_PM              = BIT(21),
 233         IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM      = BIT(22),
 234         IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM      = BIT(23),
 235         IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT       = BIT(24),
 236         IWL_UCODE_TLV_FLAGS_EBS_SUPPORT         = BIT(25),
 237         IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD        = BIT(26),
 238         IWL_UCODE_TLV_FLAGS_BCAST_FILTERING     = BIT(29),
 239         IWL_UCODE_TLV_FLAGS_GO_UAPSD            = BIT(30),
 240 };
 241
 242 typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
 243
 244 /**
 245  * enum iwl_ucode_tlv_api - ucode api
 246  * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
 247  * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
 248  *      longer than the passive one, which is essential for fragmented scan.
 249  * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
 250  * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header
 251  * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
 252  * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
 253  * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority
 254  *      instead of 3.
 255  * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size
 256  *      (command version 3) that supports per-chain limits
 257  *
 258  * @NUM_IWL_UCODE_TLV_API: number of bits used
 259  */
 260 enum iwl_ucode_tlv_api {
 261         IWL_UCODE_TLV_API_BT_COEX_SPLIT         = (__force iwl_ucode_tlv_api_t)3,
 262         IWL_UCODE_TLV_API_FRAGMENTED_SCAN       = (__force iwl_ucode_tlv_api_t)8,
 263         IWL_UCODE_TLV_API_WIFI_MCC_UPDATE       = (__force iwl_ucode_tlv_api_t)9,
 264         IWL_UCODE_TLV_API_WIDE_CMD_HDR          = (__force iwl_ucode_tlv_api_t)14,
 265         IWL_UCODE_TLV_API_LQ_SS_PARAMS          = (__force iwl_ucode_tlv_api_t)18,
 266         IWL_UCODE_TLV_API_NEW_VERSION           = (__force iwl_ucode_tlv_api_t)20,
 267         IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY     = (__force iwl_ucode_tlv_api_t)24,
 268         IWL_UCODE_TLV_API_TX_POWER_CHAIN        = (__force iwl_ucode_tlv_api_t)27,
 269
 270         NUM_IWL_UCODE_TLV_API
 271 #ifdef __CHECKER__
 272                 /* sparse says it cannot increment the previous enum member */
 273                 = 128
 274 #endif
 275 };
 276
 277 typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
 278
 279 /**
 280  * enum iwl_ucode_tlv_capa - ucode capabilities
 281  * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
 282  * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
 283  * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
 284  * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
 285  * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
 286  * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
 287  * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
 288  *      tx power value into TPC Report action frame and Link Measurement Report
 289  *      action frame
 290  * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
 291  *      channel in DS parameter set element in probe requests.
 292  * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
 293  *      probe requests.
 294  * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
 295  * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
 296  *      which also implies support for the scheduler configuration command
 297  * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
 298  * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
 299  * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
 300  * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
 301  * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
 302  * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
 303  * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
 304  *      sources for the MCC. This TLV bit is a future replacement to
 305  *      IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
 306  *      is supported.
 307  * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
 308  * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
 309  * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
 310  * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
 311  *
 312  * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
 313  */
 314 enum iwl_ucode_tlv_capa {
 315         IWL_UCODE_TLV_CAPA_D0I3_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)0,
 316         IWL_UCODE_TLV_CAPA_LAR_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)1,
 317         IWL_UCODE_TLV_CAPA_UMAC_SCAN                    = (__force iwl_ucode_tlv_capa_t)2,
 318         IWL_UCODE_TLV_CAPA_BEAMFORMER                   = (__force iwl_ucode_tlv_capa_t)3,
 319         IWL_UCODE_TLV_CAPA_TOF_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)5,
 320         IWL_UCODE_TLV_CAPA_TDLS_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)6,
 321         IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT    = (__force iwl_ucode_tlv_capa_t)8,
 322         IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT      = (__force iwl_ucode_tlv_capa_t)9,
 323         IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT       = (__force iwl_ucode_tlv_capa_t)10,
 324         IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT         = (__force iwl_ucode_tlv_capa_t)11,
 325         IWL_UCODE_TLV_CAPA_DQA_SUPPORT                  = (__force iwl_ucode_tlv_capa_t)12,
 326         IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH          = (__force iwl_ucode_tlv_capa_t)13,
 327         IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT              = (__force iwl_ucode_tlv_capa_t)18,
 328         IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT         = (__force iwl_ucode_tlv_capa_t)19,
 329         IWL_UCODE_TLV_CAPA_CSUM_SUPPORT                 = (__force iwl_ucode_tlv_capa_t)21,
 330         IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS           = (__force iwl_ucode_tlv_capa_t)22,
 331         IWL_UCODE_TLV_CAPA_BT_COEX_PLCR                 = (__force iwl_ucode_tlv_capa_t)28,
 332         IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC                = (__force iwl_ucode_tlv_capa_t)29,
 333         IWL_UCODE_TLV_CAPA_BT_COEX_RRC                  = (__force iwl_ucode_tlv_capa_t)30,
 334         IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT                = (__force iwl_ucode_tlv_capa_t)31,
 335         IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE         = (__force iwl_ucode_tlv_capa_t)64,
 336         IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS            = (__force iwl_ucode_tlv_capa_t)65,
 337
 338         NUM_IWL_UCODE_TLV_CAPA
 339 #ifdef __CHECKER__
 340                 /* sparse says it cannot increment the previous enum member */
 341                 = 128
 342 #endif
 343 };
 344
 345 /* The default calibrate table size if not specified by firmware file */
 346 #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE     18
 347 #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE         19
 348 #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE                  253
 349
 350 /* The default max probe length if not specified by the firmware file */
 351 #define IWL_DEFAULT_MAX_PROBE_LENGTH    200
 352
 353 /*
 354  * For 16.0 uCode and above, there is no differentiation between sections,
 355  * just an offset to the HW address.
 356  */
 357 #define IWL_UCODE_SECTION_MAX 16
 358 #define CPU1_CPU2_SEPARATOR_SECTION     0xFFFFCCCC
 359 #define PAGING_SEPARATOR_SECTION        0xAAAABBBB
 360
 361 /* uCode version contains 4 values: Major/Minor/API/Serial */
 362 #define IWL_UCODE_MAJOR(ver)    (((ver) & 0xFF000000) >> 24)
 363 #define IWL_UCODE_MINOR(ver)    (((ver) & 0x00FF0000) >> 16)
 364 #define IWL_UCODE_API(ver)      (((ver) & 0x0000FF00) >> 8)
 365 #define IWL_UCODE_SERIAL(ver)   ((ver) & 0x000000FF)
 366
 367 /*
 368  * Calibration control struct.
 369  * Sent as part of the phy configuration command.
 370  * @flow_trigger: bitmap for which calibrations to perform according to
 371  *              flow triggers.
 372  * @event_trigger: bitmap for which calibrations to perform according to
 373  *              event triggers.
 374  */
 375 struct iwl_tlv_calib_ctrl {
 376         __le32 flow_trigger;
 377         __le32 event_trigger;
 378 } __packed;
 379
 380 enum iwl_fw_phy_cfg {
 381         FW_PHY_CFG_RADIO_TYPE_POS = 0,
 382         FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
 383         FW_PHY_CFG_RADIO_STEP_POS = 2,
 384         FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
 385         FW_PHY_CFG_RADIO_DASH_POS = 4,
 386         FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
 387         FW_PHY_CFG_TX_CHAIN_POS = 16,
 388         FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
 389         FW_PHY_CFG_RX_CHAIN_POS = 20,
 390         FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
 391 };
 392
 393 #define IWL_UCODE_MAX_CS                1
 394
 395 /**
 396  * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
 397  * @cipher: a cipher suite selector
 398  * @flags: cipher scheme flags (currently reserved for a future use)
 399  * @hdr_len: a size of MPDU security header
 400  * @pn_len: a size of PN
 401  * @pn_off: an offset of pn from the beginning of the security header
 402  * @key_idx_off: an offset of key index byte in the security header
 403  * @key_idx_mask: a bit mask of key_idx bits
 404  * @key_idx_shift: bit shift needed to get key_idx
 405  * @mic_len: mic length in bytes
 406  * @hw_cipher: a HW cipher index used in host commands
 407  */
 408 struct iwl_fw_cipher_scheme {
 409         __le32 cipher;
 410         u8 flags;
 411         u8 hdr_len;
 412         u8 pn_len;
 413         u8 pn_off;
 414         u8 key_idx_off;
 415         u8 key_idx_mask;
 416         u8 key_idx_shift;
 417         u8 mic_len;
 418         u8 hw_cipher;
 419 } __packed;
 420
 421 enum iwl_fw_dbg_reg_operator {
 422         CSR_ASSIGN,
 423         CSR_SETBIT,
 424         CSR_CLEARBIT,
 425
 426         PRPH_ASSIGN,
 427         PRPH_SETBIT,
 428         PRPH_CLEARBIT,
 429
 430         INDIRECT_ASSIGN,
 431         INDIRECT_SETBIT,
 432         INDIRECT_CLEARBIT,
 433
 434         PRPH_BLOCKBIT,
 435 };
 436
 437 /**
 438  * struct iwl_fw_dbg_reg_op - an operation on a register
 439  *
 440  * @op: %enum iwl_fw_dbg_reg_operator
 441  * @addr: offset of the register
 442  * @val: value
 443  */
 444 struct iwl_fw_dbg_reg_op {
 445         u8 op;
 446         u8 reserved[3];
 447         __le32 addr;
 448         __le32 val;
 449 } __packed;
 450
 451 /**
 452  * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
 453  *
 454  * @SMEM_MODE: monitor stores the data in SMEM
 455  * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
 456  * @MARBH_MODE: monitor stores the data in MARBH buffer
 457  * @MIPI_MODE: monitor outputs the data through the MIPI interface
 458  */
 459 enum iwl_fw_dbg_monitor_mode {
 460         SMEM_MODE = 0,
 461         EXTERNAL_MODE = 1,
 462         MARBH_MODE = 2,
 463         MIPI_MODE = 3,
 464 };
 465
 466 /**
 467  * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
 468  *
 469  * @version: version of the TLV - currently 0
 470  * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
 471  * @size_power: buffer size will be 2^(size_power + 11)
 472  * @base_reg: addr of the base addr register (PRPH)
 473  * @end_reg:  addr of the end addr register (PRPH)
 474  * @write_ptr_reg: the addr of the reg of the write pointer
 475  * @wrap_count: the addr of the reg of the wrap_count
 476  * @base_shift: shift right of the base addr reg
 477  * @end_shift: shift right of the end addr reg
 478  * @reg_ops: array of registers operations
 479  *
 480  * This parses IWL_UCODE_TLV_FW_DBG_DEST
 481  */
 482 struct iwl_fw_dbg_dest_tlv {
 483         u8 version;
 484         u8 monitor_mode;
 485         u8 size_power;
 486         u8 reserved;
 487         __le32 base_reg;
 488         __le32 end_reg;
 489         __le32 write_ptr_reg;
 490         __le32 wrap_count;
 491         u8 base_shift;
 492         u8 end_shift;
 493         struct iwl_fw_dbg_reg_op reg_ops[0];
 494 } __packed;
 495
 496 struct iwl_fw_dbg_conf_hcmd {
 497         u8 id;
 498         u8 reserved;
 499         __le16 len;
 500         u8 data[0];
 501 } __packed;
 502
 503 /**
 504  * enum iwl_fw_dbg_trigger_mode - triggers functionalities
 505  *
 506  * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
 507  * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
 508  * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
 509  *      collect only monitor data
 510  */
 511 enum iwl_fw_dbg_trigger_mode {
 512         IWL_FW_DBG_TRIGGER_START = BIT(0),
 513         IWL_FW_DBG_TRIGGER_STOP = BIT(1),
 514         IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
 515 };
 516
 517 /**
 518  * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
 519  * @IWL_FW_DBG_CONF_VIF_ANY: any vif type
 520  * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
 521  * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
 522  * @IWL_FW_DBG_CONF_VIF_AP: AP mode
 523  * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
 524  * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
 525  * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
 526  */
 527 enum iwl_fw_dbg_trigger_vif_type {
 528         IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
 529         IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
 530         IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
 531         IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
 532         IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
 533         IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
 534         IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
 535 };
 536
 537 /**
 538  * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
 539  * @id: %enum iwl_fw_dbg_trigger
 540  * @vif_type: %enum iwl_fw_dbg_trigger_vif_type
 541  * @stop_conf_ids: bitmap of configurations this trigger relates to.
 542  *      if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
 543  *      to the currently running configuration is set, the data should be
 544  *      collected.
 545  * @stop_delay: how many milliseconds to wait before collecting the data
 546  *      after the STOP trigger fires.
 547  * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both
 548  * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
 549  *      configuration should be applied when the triggers kicks in.
 550  * @occurrences: number of occurrences. 0 means the trigger will never fire.
 551  */
 552 struct iwl_fw_dbg_trigger_tlv {
 553         __le32 id;
 554         __le32 vif_type;
 555         __le32 stop_conf_ids;
 556         __le32 stop_delay;
 557         u8 mode;
 558         u8 start_conf_id;
 559         __le16 occurrences;
 560         __le32 reserved[2];
 561
 562         u8 data[0];
 563 } __packed;
 564
 565 #define FW_DBG_START_FROM_ALIVE 0
 566 #define FW_DBG_CONF_MAX         32
 567 #define FW_DBG_INVALID          0xff
 568
 569 /**
 570  * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
 571  * @stop_consec_missed_bcon: stop recording if threshold is crossed.
 572  * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
 573  * @start_consec_missed_bcon: start recording if threshold is crossed.
 574  * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
 575  * @reserved1: reserved
 576  * @reserved2: reserved
 577  */
 578 struct iwl_fw_dbg_trigger_missed_bcon {
 579         __le32 stop_consec_missed_bcon;
 580         __le32 stop_consec_missed_bcon_since_rx;
 581         __le32 reserved2[2];
 582         __le32 start_consec_missed_bcon;
 583         __le32 start_consec_missed_bcon_since_rx;
 584         __le32 reserved1[2];
 585 } __packed;
 586
 587 /**
 588  * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
 589  * cmds: the list of commands to trigger the collection on
 590  */
 591 struct iwl_fw_dbg_trigger_cmd {
 592         struct cmd {
 593                 u8 cmd_id;
 594                 u8 group_id;
 595         } __packed cmds[16];
 596 } __packed;
 597
 598 /**
 599  * iwl_fw_dbg_trigger_stats - configures trigger for statistics
 600  * @stop_offset: the offset of the value to be monitored
 601  * @stop_threshold: the threshold above which to collect
 602  * @start_offset: the offset of the value to be monitored
 603  * @start_threshold: the threshold above which to start recording
 604  */
 605 struct iwl_fw_dbg_trigger_stats {
 606         __le32 stop_offset;
 607         __le32 stop_threshold;
 608         __le32 start_offset;
 609         __le32 start_threshold;
 610 } __packed;
 611
 612 /**
 613  * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
 614  * @rssi: RSSI value to trigger at
 615  */
 616 struct iwl_fw_dbg_trigger_low_rssi {
 617         __le32 rssi;
 618 } __packed;
 619
 620 /**
 621  * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
 622  * @stop_auth_denied: number of denied authentication to collect
 623  * @stop_auth_timeout: number of authentication timeout to collect
 624  * @stop_rx_deauth: number of Rx deauth before to collect
 625  * @stop_tx_deauth: number of Tx deauth before to collect
 626  * @stop_assoc_denied: number of denied association to collect
 627  * @stop_assoc_timeout: number of association timeout to collect
 628  * @stop_connection_loss: number of connection loss to collect
 629  * @start_auth_denied: number of denied authentication to start recording
 630  * @start_auth_timeout: number of authentication timeout to start recording
 631  * @start_rx_deauth: number of Rx deauth to start recording
 632  * @start_tx_deauth: number of Tx deauth to start recording
 633  * @start_assoc_denied: number of denied association to start recording
 634  * @start_assoc_timeout: number of association timeout to start recording
 635  * @start_connection_loss: number of connection loss to start recording
 636  */
 637 struct iwl_fw_dbg_trigger_mlme {
 638         u8 stop_auth_denied;
 639         u8 stop_auth_timeout;
 640         u8 stop_rx_deauth;
 641         u8 stop_tx_deauth;
 642
 643         u8 stop_assoc_denied;
 644         u8 stop_assoc_timeout;
 645         u8 stop_connection_loss;
 646         u8 reserved;
 647
 648         u8 start_auth_denied;
 649         u8 start_auth_timeout;
 650         u8 start_rx_deauth;
 651         u8 start_tx_deauth;
 652
 653         u8 start_assoc_denied;
 654         u8 start_assoc_timeout;
 655         u8 start_connection_loss;
 656         u8 reserved2;
 657 } __packed;
 658
 659 /**
 660  * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
 661  * @command_queue: timeout for the command queue in ms
 662  * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
 663  * @softap: timeout for the queues of a softAP in ms
 664  * @p2p_go: timeout for the queues of a P2P GO in ms
 665  * @p2p_client: timeout for the queues of a P2P client in ms
 666  * @p2p_device: timeout for the queues of a P2P device in ms
 667  * @ibss: timeout for the queues of an IBSS in ms
 668  * @tdls: timeout for the queues of a TDLS station in ms
 669  */
 670 struct iwl_fw_dbg_trigger_txq_timer {
 671         __le32 command_queue;
 672         __le32 bss;
 673         __le32 softap;
 674         __le32 p2p_go;
 675         __le32 p2p_client;
 676         __le32 p2p_device;
 677         __le32 ibss;
 678         __le32 tdls;
 679         __le32 reserved[4];
 680 } __packed;
 681
 682 /**
 683  * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
 684  * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
 685  *      trigger each time a time event notification that relates to time event
 686  *      id with one of the actions in the bitmap is received and
 687  *      BIT(notif->status) is set in status_bitmap.
 688  *
 689  */
 690 struct iwl_fw_dbg_trigger_time_event {
 691         struct {
 692                 __le32 id;
 693                 __le32 action_bitmap;
 694                 __le32 status_bitmap;
 695         } __packed time_events[16];
 696 } __packed;
 697
 698 /**
 699  * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
 700  * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
 701  *      when an Rx BlockAck session is started.
 702  * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
 703  *      when an Rx BlockAck session is stopped.
 704  * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
 705  *      when a Tx BlockAck session is started.
 706  * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
 707  *      when a Tx BlockAck session is stopped.
 708  * rx_bar: tid bitmap to configure on what tid the trigger should occur
 709  *      when a BAR is received (for a Tx BlockAck session).
 710  * tx_bar: tid bitmap to configure on what tid the trigger should occur
 711  *      when a BAR is send (for an Rx BlocAck session).
 712  * frame_timeout: tid bitmap to configure on what tid the trigger should occur
 713  *      when a frame times out in the reodering buffer.
 714  */
 715 struct iwl_fw_dbg_trigger_ba {
 716         __le16 rx_ba_start;
 717         __le16 rx_ba_stop;
 718         __le16 tx_ba_start;
 719         __le16 tx_ba_stop;
 720         __le16 rx_bar;
 721         __le16 tx_bar;
 722         __le16 frame_timeout;
 723 } __packed;
 724
 725 /**
 726  * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
 727  * @id: conf id
 728  * @usniffer: should the uSniffer image be used
 729  * @num_of_hcmds: how many HCMDs to send are present here
 730  * @hcmd: a variable length host command to be sent to apply the configuration.
 731  *      If there is more than one HCMD to send, they will appear one after the
 732  *      other and be sent in the order that they appear in.
 733  * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
 734  * %FW_DBG_CONF_MAX configuration per run.
 735  */
 736 struct iwl_fw_dbg_conf_tlv {
 737         u8 id;
 738         u8 usniffer;
 739         u8 reserved;
 740         u8 num_of_hcmds;
 741         struct iwl_fw_dbg_conf_hcmd hcmd;
 742 } __packed;
 743
 744 /**
 745  * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW
 746  * @max_scan_cache_size: total space allocated for scan results (in bytes).
 747  * @max_scan_buckets: maximum number of channel buckets.
 748  * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
 749  * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
 750  * @max_scan_reporting_threshold: max possible report threshold. in percentage.
 751  * @max_hotlist_aps: maximum number of entries for hotlist APs.
 752  * @max_significant_change_aps: maximum number of entries for significant
 753  *      change APs.
 754  * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
 755  *      hold.
 756  */
 757 struct iwl_fw_gscan_capabilities {
 758         __le32 max_scan_cache_size;
 759         __le32 max_scan_buckets;
 760         __le32 max_ap_cache_per_scan;
 761         __le32 max_rssi_sample_size;
 762         __le32 max_scan_reporting_threshold;
 763         __le32 max_hotlist_aps;
 764         __le32 max_significant_change_aps;
 765         __le32 max_bssid_history_entries;
 766 } __packed;
 767
 768 #endif  /* __iwl_fw_file_h__ */