1 /* ------------------------------------------------------------------------- */
2 /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */
3 /* ------------------------------------------------------------------------- */
4 /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
5 * <Peter dot Milne at D hyphen TACQ dot com>
7 * With acknowledgements to i2c-algo-ibm_ocp.c by
8 * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
10 * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
12 * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
14 * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
15 * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
17 * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
19 * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
20 * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
21 * - Make it work with IXP46x chips
22 * - Cleanup function names, coding style, etc
24 * - writing to slave address causes latchup on iop331.
25 * fix: driver refuses to address self.
27 * This program is free software; you can redistribute it and/or modify
28 * it under the terms of the GNU General Public License as published by
29 * the Free Software Foundation, version 2.
32 #include <linux/interrupt.h>
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/delay.h>
36 #include <linux/slab.h>
37 #include <linux/init.h>
38 #include <linux/errno.h>
39 #include <linux/platform_device.h>
40 #include <linux/i2c.h>
43 #include "i2c-iop3xx.h"
45 /* global unit counter */
48 static inline unsigned char
49 iic_cook_addr(struct i2c_msg
*msg
)
53 addr
= (msg
->addr
<< 1);
55 if (msg
->flags
& I2C_M_RD
)
62 iop3xx_i2c_reset(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
64 /* Follows devman 9.3 */
65 __raw_writel(IOP3XX_ICR_UNIT_RESET
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
66 __raw_writel(IOP3XX_ISR_CLEARBITS
, iop3xx_adap
->ioaddr
+ SR_OFFSET
);
67 __raw_writel(0, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
71 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
73 u32 cr
= IOP3XX_ICR_GCD
| IOP3XX_ICR_SCLEN
| IOP3XX_ICR_UE
;
76 * Every time unit enable is asserted, GPOD needs to be cleared
77 * on IOP3XX to avoid data corruption on the bus.
79 #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
80 if (iop3xx_adap
->id
== 0) {
81 gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW
);
82 gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW
);
84 gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW
);
85 gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW
);
88 /* NB SR bits not same position as CR IE bits :-( */
89 iop3xx_adap
->SR_enabled
=
90 IOP3XX_ISR_ALD
| IOP3XX_ISR_BERRD
|
91 IOP3XX_ISR_RXFULL
| IOP3XX_ISR_TXEMPTY
;
93 cr
|= IOP3XX_ICR_ALD_IE
| IOP3XX_ICR_BERR_IE
|
94 IOP3XX_ICR_RXFULL_IE
| IOP3XX_ICR_TXEMPTY_IE
;
96 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
100 iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
102 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
104 cr
&= ~(IOP3XX_ICR_MSTART
| IOP3XX_ICR_TBYTE
|
105 IOP3XX_ICR_MSTOP
| IOP3XX_ICR_SCLEN
);
107 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
111 * NB: the handler has to clear the source of the interrupt!
112 * Then it passes the SR flags of interest to BH via adap data
115 iop3xx_i2c_irq_handler(int this_irq
, void *dev_id
)
117 struct i2c_algo_iop3xx_data
*iop3xx_adap
= dev_id
;
118 u32 sr
= __raw_readl(iop3xx_adap
->ioaddr
+ SR_OFFSET
);
120 if ((sr
&= iop3xx_adap
->SR_enabled
)) {
121 __raw_writel(sr
, iop3xx_adap
->ioaddr
+ SR_OFFSET
);
122 iop3xx_adap
->SR_received
|= sr
;
123 wake_up_interruptible(&iop3xx_adap
->waitq
);
128 /* check all error conditions, clear them , report most important */
130 iop3xx_i2c_error(u32 sr
)
134 if ((sr
& IOP3XX_ISR_BERRD
)) {
135 if ( !rc
) rc
= -I2C_ERR_BERR
;
137 if ((sr
& IOP3XX_ISR_ALD
)) {
138 if ( !rc
) rc
= -I2C_ERR_ALD
;
144 iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data
*iop3xx_adap
)
149 spin_lock_irqsave(&iop3xx_adap
->lock
, flags
);
150 sr
= iop3xx_adap
->SR_received
;
151 iop3xx_adap
->SR_received
= 0;
152 spin_unlock_irqrestore(&iop3xx_adap
->lock
, flags
);
158 * sleep until interrupted, then recover and analyse the SR
161 typedef int (* compare_func
)(unsigned test
, unsigned mask
);
162 /* returns 1 on correct comparison */
165 iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data
*iop3xx_adap
,
166 unsigned flags
, unsigned* status
,
167 compare_func compare
)
175 interrupted
= wait_event_interruptible_timeout (
177 (done
= compare( sr
= iop3xx_i2c_get_srstat(iop3xx_adap
) ,flags
)),
180 if ((rc
= iop3xx_i2c_error(sr
)) < 0) {
183 } else if (!interrupted
) {
195 * Concrete compare_funcs
198 all_bits_clear(unsigned test
, unsigned mask
)
200 return (test
& mask
) == 0;
204 any_bits_set(unsigned test
, unsigned mask
)
206 return (test
& mask
) != 0;
210 iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data
*iop3xx_adap
, int *status
)
212 return iop3xx_i2c_wait_event(
214 IOP3XX_ISR_TXEMPTY
| IOP3XX_ISR_ALD
| IOP3XX_ISR_BERRD
,
215 status
, any_bits_set
);
219 iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data
*iop3xx_adap
, int *status
)
221 return iop3xx_i2c_wait_event(
223 IOP3XX_ISR_RXFULL
| IOP3XX_ISR_ALD
| IOP3XX_ISR_BERRD
,
224 status
, any_bits_set
);
228 iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data
*iop3xx_adap
, int *status
)
230 return iop3xx_i2c_wait_event(
231 iop3xx_adap
, IOP3XX_ISR_UNITBUSY
, status
, all_bits_clear
);
235 iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data
*iop3xx_adap
,
238 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
242 /* avoid writing to my slave address (hangs on 80331),
243 * forbidden in Intel developer manual
245 if (msg
->addr
== MYSAR
) {
249 __raw_writel(iic_cook_addr(msg
), iop3xx_adap
->ioaddr
+ DBR_OFFSET
);
251 cr
&= ~(IOP3XX_ICR_MSTOP
| IOP3XX_ICR_NACK
);
252 cr
|= IOP3XX_ICR_MSTART
| IOP3XX_ICR_TBYTE
;
254 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
255 rc
= iop3xx_i2c_wait_tx_done(iop3xx_adap
, &status
);
261 iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data
*iop3xx_adap
, char byte
,
264 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
268 __raw_writel(byte
, iop3xx_adap
->ioaddr
+ DBR_OFFSET
);
269 cr
&= ~IOP3XX_ICR_MSTART
;
271 cr
|= IOP3XX_ICR_MSTOP
;
273 cr
&= ~IOP3XX_ICR_MSTOP
;
275 cr
|= IOP3XX_ICR_TBYTE
;
276 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
277 rc
= iop3xx_i2c_wait_tx_done(iop3xx_adap
, &status
);
283 iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data
*iop3xx_adap
, char* byte
,
286 unsigned long cr
= __raw_readl(iop3xx_adap
->ioaddr
+ CR_OFFSET
);
290 cr
&= ~IOP3XX_ICR_MSTART
;
293 cr
|= IOP3XX_ICR_MSTOP
| IOP3XX_ICR_NACK
;
295 cr
&= ~(IOP3XX_ICR_MSTOP
| IOP3XX_ICR_NACK
);
297 cr
|= IOP3XX_ICR_TBYTE
;
298 __raw_writel(cr
, iop3xx_adap
->ioaddr
+ CR_OFFSET
);
300 rc
= iop3xx_i2c_wait_rx_done(iop3xx_adap
, &status
);
302 *byte
= __raw_readl(iop3xx_adap
->ioaddr
+ DBR_OFFSET
);
308 iop3xx_i2c_writebytes(struct i2c_adapter
*i2c_adap
, const char *buf
, int count
)
310 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
314 for (ii
= 0; rc
== 0 && ii
!= count
; ++ii
)
315 rc
= iop3xx_i2c_write_byte(iop3xx_adap
, buf
[ii
], ii
==count
-1);
320 iop3xx_i2c_readbytes(struct i2c_adapter
*i2c_adap
, char *buf
, int count
)
322 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
326 for (ii
= 0; rc
== 0 && ii
!= count
; ++ii
)
327 rc
= iop3xx_i2c_read_byte(iop3xx_adap
, &buf
[ii
], ii
==count
-1);
333 * Description: This function implements combined transactions. Combined
334 * transactions consist of combinations of reading and writing blocks of data.
335 * FROM THE SAME ADDRESS
336 * Each transfer (i.e. a read or a write) is separated by a repeated start
340 iop3xx_i2c_handle_msg(struct i2c_adapter
*i2c_adap
, struct i2c_msg
* pmsg
)
342 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
345 rc
= iop3xx_i2c_send_target_addr(iop3xx_adap
, pmsg
);
350 if ((pmsg
->flags
&I2C_M_RD
)) {
351 return iop3xx_i2c_readbytes(i2c_adap
, pmsg
->buf
, pmsg
->len
);
353 return iop3xx_i2c_writebytes(i2c_adap
, pmsg
->buf
, pmsg
->len
);
358 * master_xfer() - main read/write entry
361 iop3xx_i2c_master_xfer(struct i2c_adapter
*i2c_adap
, struct i2c_msg
*msgs
,
364 struct i2c_algo_iop3xx_data
*iop3xx_adap
= i2c_adap
->algo_data
;
369 iop3xx_i2c_wait_idle(iop3xx_adap
, &status
);
370 iop3xx_i2c_reset(iop3xx_adap
);
371 iop3xx_i2c_enable(iop3xx_adap
);
373 for (im
= 0; ret
== 0 && im
!= num
; im
++) {
374 ret
= iop3xx_i2c_handle_msg(i2c_adap
, &msgs
[im
]);
377 iop3xx_i2c_transaction_cleanup(iop3xx_adap
);
386 iop3xx_i2c_func(struct i2c_adapter
*adap
)
388 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
;
391 static const struct i2c_algorithm iop3xx_i2c_algo
= {
392 .master_xfer
= iop3xx_i2c_master_xfer
,
393 .functionality
= iop3xx_i2c_func
,
397 iop3xx_i2c_remove(struct platform_device
*pdev
)
399 struct i2c_adapter
*padapter
= platform_get_drvdata(pdev
);
400 struct i2c_algo_iop3xx_data
*adapter_data
=
401 (struct i2c_algo_iop3xx_data
*)padapter
->algo_data
;
402 struct resource
*res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
403 unsigned long cr
= __raw_readl(adapter_data
->ioaddr
+ CR_OFFSET
);
406 * Disable the actual HW unit
408 cr
&= ~(IOP3XX_ICR_ALD_IE
| IOP3XX_ICR_BERR_IE
|
409 IOP3XX_ICR_RXFULL_IE
| IOP3XX_ICR_TXEMPTY_IE
);
410 __raw_writel(cr
, adapter_data
->ioaddr
+ CR_OFFSET
);
412 iounmap(adapter_data
->ioaddr
);
413 release_mem_region(res
->start
, IOP3XX_I2C_IO_SIZE
);
417 platform_set_drvdata(pdev
, NULL
);
423 iop3xx_i2c_probe(struct platform_device
*pdev
)
425 struct resource
*res
;
427 struct i2c_adapter
*new_adapter
;
428 struct i2c_algo_iop3xx_data
*adapter_data
;
430 new_adapter
= kzalloc(sizeof(struct i2c_adapter
), GFP_KERNEL
);
436 adapter_data
= kzalloc(sizeof(struct i2c_algo_iop3xx_data
), GFP_KERNEL
);
442 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
448 if (!request_mem_region(res
->start
, IOP3XX_I2C_IO_SIZE
, pdev
->name
)) {
453 /* set the adapter enumeration # */
454 adapter_data
->id
= i2c_id
++;
456 adapter_data
->ioaddr
= ioremap(res
->start
, IOP3XX_I2C_IO_SIZE
);
457 if (!adapter_data
->ioaddr
) {
462 irq
= platform_get_irq(pdev
, 0);
467 ret
= request_irq(irq
, iop3xx_i2c_irq_handler
, 0,
468 pdev
->name
, adapter_data
);
475 memcpy(new_adapter
->name
, pdev
->name
, strlen(pdev
->name
));
476 new_adapter
->owner
= THIS_MODULE
;
477 new_adapter
->class = I2C_CLASS_HWMON
| I2C_CLASS_SPD
;
478 new_adapter
->dev
.parent
= &pdev
->dev
;
479 new_adapter
->nr
= pdev
->id
;
482 * Default values...should these come in from board code?
484 new_adapter
->timeout
= HZ
;
485 new_adapter
->algo
= &iop3xx_i2c_algo
;
487 init_waitqueue_head(&adapter_data
->waitq
);
488 spin_lock_init(&adapter_data
->lock
);
490 iop3xx_i2c_reset(adapter_data
);
491 iop3xx_i2c_enable(adapter_data
);
493 platform_set_drvdata(pdev
, new_adapter
);
494 new_adapter
->algo_data
= adapter_data
;
496 i2c_add_numbered_adapter(new_adapter
);
501 iounmap(adapter_data
->ioaddr
);
504 release_mem_region(res
->start
, IOP3XX_I2C_IO_SIZE
);
517 static struct platform_driver iop3xx_i2c_driver
= {
518 .probe
= iop3xx_i2c_probe
,
519 .remove
= iop3xx_i2c_remove
,
521 .owner
= THIS_MODULE
,
522 .name
= "IOP3xx-I2C",
526 module_platform_driver(iop3xx_i2c_driver
);
528 MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
529 MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
530 MODULE_LICENSE("GPL");
531 MODULE_ALIAS("platform:IOP3xx-I2C");