4 * I2C adapter for the PXA I2C bus access.
6 * Copyright (C) 2002 Intrinsyc Software Inc.
7 * Copyright (C) 2004-2005 Deep Blue Solutions Ltd.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 * Apr 2002: Initial version [CS]
15 * Jun 2002: Properly separated algo/adap [FB]
16 * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
17 * Jan 2003: added limited signal handling [Kai-Uwe Bloem]
18 * Sep 2004: Major rework to ensure efficient bus handling [RMK]
19 * Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
20 * Feb 2005: Rework slave mode handling [RMK]
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/i2c.h>
25 #include <linux/init.h>
26 #include <linux/time.h>
27 #include <linux/sched.h>
28 #include <linux/delay.h>
29 #include <linux/errno.h>
30 #include <linux/interrupt.h>
31 #include <linux/i2c-pxa.h>
33 #include <linux/of_device.h>
34 #include <linux/of_i2c.h>
35 #include <linux/platform_device.h>
36 #include <linux/err.h>
37 #include <linux/clk.h>
38 #include <linux/slab.h>
40 #include <linux/i2c/pxa-i2c.h>
44 #ifndef CONFIG_HAVE_CLK
45 #define clk_get(dev, id) NULL
46 #define clk_put(clk) do { } while (0)
47 #define clk_disable(clk) do { } while (0)
48 #define clk_enable(clk) do { } while (0)
51 struct pxa_reg_layout
{
66 * I2C registers definitions
68 static struct pxa_reg_layout pxa_reg_layout
[] = {
88 /* no isar register */
92 static const struct platform_device_id i2c_pxa_id_table
[] = {
93 { "pxa2xx-i2c", REGS_PXA2XX
},
94 { "pxa3xx-pwri2c", REGS_PXA3XX
},
95 { "ce4100-i2c", REGS_CE4100
},
98 MODULE_DEVICE_TABLE(platform
, i2c_pxa_id_table
);
101 * I2C bit definitions
104 #define ICR_START (1 << 0) /* start bit */
105 #define ICR_STOP (1 << 1) /* stop bit */
106 #define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
107 #define ICR_TB (1 << 3) /* transfer byte bit */
108 #define ICR_MA (1 << 4) /* master abort */
109 #define ICR_SCLE (1 << 5) /* master clock enable */
110 #define ICR_IUE (1 << 6) /* unit enable */
111 #define ICR_GCD (1 << 7) /* general call disable */
112 #define ICR_ITEIE (1 << 8) /* enable tx interrupts */
113 #define ICR_IRFIE (1 << 9) /* enable rx interrupts */
114 #define ICR_BEIE (1 << 10) /* enable bus error ints */
115 #define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
116 #define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
117 #define ICR_SADIE (1 << 13) /* slave address detected int enable */
118 #define ICR_UR (1 << 14) /* unit reset */
119 #define ICR_FM (1 << 15) /* fast mode */
121 #define ISR_RWM (1 << 0) /* read/write mode */
122 #define ISR_ACKNAK (1 << 1) /* ack/nak status */
123 #define ISR_UB (1 << 2) /* unit busy */
124 #define ISR_IBB (1 << 3) /* bus busy */
125 #define ISR_SSD (1 << 4) /* slave stop detected */
126 #define ISR_ALD (1 << 5) /* arbitration loss detected */
127 #define ISR_ITE (1 << 6) /* tx buffer empty */
128 #define ISR_IRF (1 << 7) /* rx buffer full */
129 #define ISR_GCAD (1 << 8) /* general call address detected */
130 #define ISR_SAD (1 << 9) /* slave address detected */
131 #define ISR_BED (1 << 10) /* bus error no ACK/NAK */
135 wait_queue_head_t wait
;
137 unsigned int msg_num
;
138 unsigned int msg_idx
;
139 unsigned int msg_ptr
;
140 unsigned int slave_addr
;
142 struct i2c_adapter adap
;
144 #ifdef CONFIG_I2C_PXA_SLAVE
145 struct i2c_slave_client
*slave
;
148 unsigned int irqlogidx
;
152 void __iomem
*reg_base
;
153 void __iomem
*reg_ibmr
;
154 void __iomem
*reg_idbr
;
155 void __iomem
*reg_icr
;
156 void __iomem
*reg_isr
;
157 void __iomem
*reg_isar
;
159 unsigned long iobase
;
160 unsigned long iosize
;
163 unsigned int use_pio
:1;
164 unsigned int fast_mode
:1;
167 #define _IBMR(i2c) ((i2c)->reg_ibmr)
168 #define _IDBR(i2c) ((i2c)->reg_idbr)
169 #define _ICR(i2c) ((i2c)->reg_icr)
170 #define _ISR(i2c) ((i2c)->reg_isr)
171 #define _ISAR(i2c) ((i2c)->reg_isar)
174 * I2C Slave mode address
176 #define I2C_PXA_SLAVE_ADDR 0x1
185 #define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u }
188 decode_bits(const char *prefix
, const struct bits
*bits
, int num
, u32 val
)
190 printk("%s %08x: ", prefix
, val
);
192 const char *str
= val
& bits
->mask
? bits
->set
: bits
->unset
;
199 static const struct bits isr_bits
[] = {
200 PXA_BIT(ISR_RWM
, "RX", "TX"),
201 PXA_BIT(ISR_ACKNAK
, "NAK", "ACK"),
202 PXA_BIT(ISR_UB
, "Bsy", "Rdy"),
203 PXA_BIT(ISR_IBB
, "BusBsy", "BusRdy"),
204 PXA_BIT(ISR_SSD
, "SlaveStop", NULL
),
205 PXA_BIT(ISR_ALD
, "ALD", NULL
),
206 PXA_BIT(ISR_ITE
, "TxEmpty", NULL
),
207 PXA_BIT(ISR_IRF
, "RxFull", NULL
),
208 PXA_BIT(ISR_GCAD
, "GenCall", NULL
),
209 PXA_BIT(ISR_SAD
, "SlaveAddr", NULL
),
210 PXA_BIT(ISR_BED
, "BusErr", NULL
),
213 static void decode_ISR(unsigned int val
)
215 decode_bits(KERN_DEBUG
"ISR", isr_bits
, ARRAY_SIZE(isr_bits
), val
);
219 static const struct bits icr_bits
[] = {
220 PXA_BIT(ICR_START
, "START", NULL
),
221 PXA_BIT(ICR_STOP
, "STOP", NULL
),
222 PXA_BIT(ICR_ACKNAK
, "ACKNAK", NULL
),
223 PXA_BIT(ICR_TB
, "TB", NULL
),
224 PXA_BIT(ICR_MA
, "MA", NULL
),
225 PXA_BIT(ICR_SCLE
, "SCLE", "scle"),
226 PXA_BIT(ICR_IUE
, "IUE", "iue"),
227 PXA_BIT(ICR_GCD
, "GCD", NULL
),
228 PXA_BIT(ICR_ITEIE
, "ITEIE", NULL
),
229 PXA_BIT(ICR_IRFIE
, "IRFIE", NULL
),
230 PXA_BIT(ICR_BEIE
, "BEIE", NULL
),
231 PXA_BIT(ICR_SSDIE
, "SSDIE", NULL
),
232 PXA_BIT(ICR_ALDIE
, "ALDIE", NULL
),
233 PXA_BIT(ICR_SADIE
, "SADIE", NULL
),
234 PXA_BIT(ICR_UR
, "UR", "ur"),
237 #ifdef CONFIG_I2C_PXA_SLAVE
238 static void decode_ICR(unsigned int val
)
240 decode_bits(KERN_DEBUG
"ICR", icr_bits
, ARRAY_SIZE(icr_bits
), val
);
245 static unsigned int i2c_debug
= DEBUG
;
247 static void i2c_pxa_show_state(struct pxa_i2c
*i2c
, int lno
, const char *fname
)
249 dev_dbg(&i2c
->adap
.dev
, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname
, lno
,
250 readl(_ISR(i2c
)), readl(_ICR(i2c
)), readl(_IBMR(i2c
)));
253 #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
255 static void i2c_pxa_scream_blue_murder(struct pxa_i2c
*i2c
, const char *why
)
258 printk(KERN_ERR
"i2c: error: %s\n", why
);
259 printk(KERN_ERR
"i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
260 i2c
->msg_num
, i2c
->msg_idx
, i2c
->msg_ptr
);
261 printk(KERN_ERR
"i2c: ICR: %08x ISR: %08x\n",
262 readl(_ICR(i2c
)), readl(_ISR(i2c
)));
263 printk(KERN_DEBUG
"i2c: log: ");
264 for (i
= 0; i
< i2c
->irqlogidx
; i
++)
265 printk("[%08x:%08x] ", i2c
->isrlog
[i
], i2c
->icrlog
[i
]);
269 #else /* ifdef DEBUG */
273 #define show_state(i2c) do { } while (0)
274 #define decode_ISR(val) do { } while (0)
275 #define decode_ICR(val) do { } while (0)
276 #define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0)
278 #endif /* ifdef DEBUG / else */
280 static void i2c_pxa_master_complete(struct pxa_i2c
*i2c
, int ret
);
281 static irqreturn_t
i2c_pxa_handler(int this_irq
, void *dev_id
);
283 static inline int i2c_pxa_is_slavemode(struct pxa_i2c
*i2c
)
285 return !(readl(_ICR(i2c
)) & ICR_SCLE
);
288 static void i2c_pxa_abort(struct pxa_i2c
*i2c
)
292 if (i2c_pxa_is_slavemode(i2c
)) {
293 dev_dbg(&i2c
->adap
.dev
, "%s: called in slave mode\n", __func__
);
297 while ((i
> 0) && (readl(_IBMR(i2c
)) & 0x1) == 0) {
298 unsigned long icr
= readl(_ICR(i2c
));
301 icr
|= ICR_ACKNAK
| ICR_STOP
| ICR_TB
;
303 writel(icr
, _ICR(i2c
));
311 writel(readl(_ICR(i2c
)) & ~(ICR_MA
| ICR_START
| ICR_STOP
),
315 static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c
*i2c
)
317 int timeout
= DEF_TIMEOUT
;
319 while (timeout
-- && readl(_ISR(i2c
)) & (ISR_IBB
| ISR_UB
)) {
320 if ((readl(_ISR(i2c
)) & ISR_SAD
) != 0)
330 return timeout
< 0 ? I2C_RETRY
: 0;
333 static int i2c_pxa_wait_master(struct pxa_i2c
*i2c
)
335 unsigned long timeout
= jiffies
+ HZ
*4;
337 while (time_before(jiffies
, timeout
)) {
339 dev_dbg(&i2c
->adap
.dev
, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
340 __func__
, (long)jiffies
, readl(_ISR(i2c
)), readl(_ICR(i2c
)), readl(_IBMR(i2c
)));
342 if (readl(_ISR(i2c
)) & ISR_SAD
) {
344 dev_dbg(&i2c
->adap
.dev
, "%s: Slave detected\n", __func__
);
348 /* wait for unit and bus being not busy, and we also do a
349 * quick check of the i2c lines themselves to ensure they've
352 if ((readl(_ISR(i2c
)) & (ISR_UB
| ISR_IBB
)) == 0 && readl(_IBMR(i2c
)) == 3) {
354 dev_dbg(&i2c
->adap
.dev
, "%s: done\n", __func__
);
362 dev_dbg(&i2c
->adap
.dev
, "%s: did not free\n", __func__
);
367 static int i2c_pxa_set_master(struct pxa_i2c
*i2c
)
370 dev_dbg(&i2c
->adap
.dev
, "setting to bus master\n");
372 if ((readl(_ISR(i2c
)) & (ISR_UB
| ISR_IBB
)) != 0) {
373 dev_dbg(&i2c
->adap
.dev
, "%s: unit is busy\n", __func__
);
374 if (!i2c_pxa_wait_master(i2c
)) {
375 dev_dbg(&i2c
->adap
.dev
, "%s: error: unit busy\n", __func__
);
380 writel(readl(_ICR(i2c
)) | ICR_SCLE
, _ICR(i2c
));
384 #ifdef CONFIG_I2C_PXA_SLAVE
385 static int i2c_pxa_wait_slave(struct pxa_i2c
*i2c
)
387 unsigned long timeout
= jiffies
+ HZ
*1;
393 while (time_before(jiffies
, timeout
)) {
395 dev_dbg(&i2c
->adap
.dev
, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
396 __func__
, (long)jiffies
, readl(_ISR(i2c
)), readl(_ICR(i2c
)), readl(_IBMR(i2c
)));
398 if ((readl(_ISR(i2c
)) & (ISR_UB
|ISR_IBB
)) == 0 ||
399 (readl(_ISR(i2c
)) & ISR_SAD
) != 0 ||
400 (readl(_ICR(i2c
)) & ICR_SCLE
) == 0) {
402 dev_dbg(&i2c
->adap
.dev
, "%s: done\n", __func__
);
410 dev_dbg(&i2c
->adap
.dev
, "%s: did not free\n", __func__
);
415 * clear the hold on the bus, and take of anything else
416 * that has been configured
418 static void i2c_pxa_set_slave(struct pxa_i2c
*i2c
, int errcode
)
423 udelay(100); /* simple delay */
425 /* we need to wait for the stop condition to end */
427 /* if we where in stop, then clear... */
428 if (readl(_ICR(i2c
)) & ICR_STOP
) {
430 writel(readl(_ICR(i2c
)) & ~ICR_STOP
, _ICR(i2c
));
433 if (!i2c_pxa_wait_slave(i2c
)) {
434 dev_err(&i2c
->adap
.dev
, "%s: wait timedout\n",
440 writel(readl(_ICR(i2c
)) & ~(ICR_STOP
|ICR_ACKNAK
|ICR_MA
), _ICR(i2c
));
441 writel(readl(_ICR(i2c
)) & ~ICR_SCLE
, _ICR(i2c
));
444 dev_dbg(&i2c
->adap
.dev
, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c
)), readl(_ISR(i2c
)));
445 decode_ICR(readl(_ICR(i2c
)));
449 #define i2c_pxa_set_slave(i2c, err) do { } while (0)
452 static void i2c_pxa_reset(struct pxa_i2c
*i2c
)
454 pr_debug("Resetting I2C Controller Unit\n");
456 /* abort any transfer currently under way */
459 /* reset according to 9.8 */
460 writel(ICR_UR
, _ICR(i2c
));
461 writel(I2C_ISR_INIT
, _ISR(i2c
));
462 writel(readl(_ICR(i2c
)) & ~ICR_UR
, _ICR(i2c
));
465 writel(i2c
->slave_addr
, _ISAR(i2c
));
467 /* set control register values */
468 writel(I2C_ICR_INIT
| (i2c
->fast_mode
? ICR_FM
: 0), _ICR(i2c
));
470 #ifdef CONFIG_I2C_PXA_SLAVE
471 dev_info(&i2c
->adap
.dev
, "Enabling slave mode\n");
472 writel(readl(_ICR(i2c
)) | ICR_SADIE
| ICR_ALDIE
| ICR_SSDIE
, _ICR(i2c
));
475 i2c_pxa_set_slave(i2c
, 0);
478 writel(readl(_ICR(i2c
)) | ICR_IUE
, _ICR(i2c
));
483 #ifdef CONFIG_I2C_PXA_SLAVE
488 static void i2c_pxa_slave_txempty(struct pxa_i2c
*i2c
, u32 isr
)
491 /* what should we do here? */
495 if (i2c
->slave
!= NULL
)
496 ret
= i2c
->slave
->read(i2c
->slave
->data
);
498 writel(ret
, _IDBR(i2c
));
499 writel(readl(_ICR(i2c
)) | ICR_TB
, _ICR(i2c
)); /* allow next byte */
503 static void i2c_pxa_slave_rxfull(struct pxa_i2c
*i2c
, u32 isr
)
505 unsigned int byte
= readl(_IDBR(i2c
));
507 if (i2c
->slave
!= NULL
)
508 i2c
->slave
->write(i2c
->slave
->data
, byte
);
510 writel(readl(_ICR(i2c
)) | ICR_TB
, _ICR(i2c
));
513 static void i2c_pxa_slave_start(struct pxa_i2c
*i2c
, u32 isr
)
518 dev_dbg(&i2c
->adap
.dev
, "SAD, mode is slave-%cx\n",
519 (isr
& ISR_RWM
) ? 'r' : 't');
521 if (i2c
->slave
!= NULL
)
522 i2c
->slave
->event(i2c
->slave
->data
,
523 (isr
& ISR_RWM
) ? I2C_SLAVE_EVENT_START_READ
: I2C_SLAVE_EVENT_START_WRITE
);
526 * slave could interrupt in the middle of us generating a
527 * start condition... if this happens, we'd better back off
528 * and stop holding the poor thing up
530 writel(readl(_ICR(i2c
)) & ~(ICR_START
|ICR_STOP
), _ICR(i2c
));
531 writel(readl(_ICR(i2c
)) | ICR_TB
, _ICR(i2c
));
536 if ((readl(_IBMR(i2c
)) & 2) == 2)
542 dev_err(&i2c
->adap
.dev
, "timeout waiting for SCL high\n");
547 writel(readl(_ICR(i2c
)) & ~ICR_SCLE
, _ICR(i2c
));
550 static void i2c_pxa_slave_stop(struct pxa_i2c
*i2c
)
553 dev_dbg(&i2c
->adap
.dev
, "ISR: SSD (Slave Stop)\n");
555 if (i2c
->slave
!= NULL
)
556 i2c
->slave
->event(i2c
->slave
->data
, I2C_SLAVE_EVENT_STOP
);
559 dev_dbg(&i2c
->adap
.dev
, "ISR: SSD (Slave Stop) acked\n");
562 * If we have a master-mode message waiting,
563 * kick it off now that the slave has completed.
566 i2c_pxa_master_complete(i2c
, I2C_RETRY
);
569 static void i2c_pxa_slave_txempty(struct pxa_i2c
*i2c
, u32 isr
)
572 /* what should we do here? */
574 writel(0, _IDBR(i2c
));
575 writel(readl(_ICR(i2c
)) | ICR_TB
, _ICR(i2c
));
579 static void i2c_pxa_slave_rxfull(struct pxa_i2c
*i2c
, u32 isr
)
581 writel(readl(_ICR(i2c
)) | ICR_TB
| ICR_ACKNAK
, _ICR(i2c
));
584 static void i2c_pxa_slave_start(struct pxa_i2c
*i2c
, u32 isr
)
589 * slave could interrupt in the middle of us generating a
590 * start condition... if this happens, we'd better back off
591 * and stop holding the poor thing up
593 writel(readl(_ICR(i2c
)) & ~(ICR_START
|ICR_STOP
), _ICR(i2c
));
594 writel(readl(_ICR(i2c
)) | ICR_TB
| ICR_ACKNAK
, _ICR(i2c
));
599 if ((readl(_IBMR(i2c
)) & 2) == 2)
605 dev_err(&i2c
->adap
.dev
, "timeout waiting for SCL high\n");
610 writel(readl(_ICR(i2c
)) & ~ICR_SCLE
, _ICR(i2c
));
613 static void i2c_pxa_slave_stop(struct pxa_i2c
*i2c
)
616 i2c_pxa_master_complete(i2c
, I2C_RETRY
);
621 * PXA I2C Master mode
624 static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg
*msg
)
626 unsigned int addr
= (msg
->addr
& 0x7f) << 1;
628 if (msg
->flags
& I2C_M_RD
)
634 static inline void i2c_pxa_start_message(struct pxa_i2c
*i2c
)
639 * Step 1: target slave address into IDBR
641 writel(i2c_pxa_addr_byte(i2c
->msg
), _IDBR(i2c
));
644 * Step 2: initiate the write.
646 icr
= readl(_ICR(i2c
)) & ~(ICR_STOP
| ICR_ALDIE
);
647 writel(icr
| ICR_START
| ICR_TB
, _ICR(i2c
));
650 static inline void i2c_pxa_stop_message(struct pxa_i2c
*i2c
)
655 * Clear the STOP and ACK flags
657 icr
= readl(_ICR(i2c
));
658 icr
&= ~(ICR_STOP
| ICR_ACKNAK
);
659 writel(icr
, _ICR(i2c
));
662 static int i2c_pxa_pio_set_master(struct pxa_i2c
*i2c
)
664 /* make timeout the same as for interrupt based functions */
665 long timeout
= 2 * DEF_TIMEOUT
;
668 * Wait for the bus to become free.
670 while (timeout
-- && readl(_ISR(i2c
)) & (ISR_IBB
| ISR_UB
)) {
677 dev_err(&i2c
->adap
.dev
,
678 "i2c_pxa: timeout waiting for bus free\n");
685 writel(readl(_ICR(i2c
)) | ICR_SCLE
, _ICR(i2c
));
690 static int i2c_pxa_do_pio_xfer(struct pxa_i2c
*i2c
,
691 struct i2c_msg
*msg
, int num
)
693 unsigned long timeout
= 500000; /* 5 seconds */
696 ret
= i2c_pxa_pio_set_master(i2c
);
706 i2c_pxa_start_message(i2c
);
708 while (i2c
->msg_num
> 0 && --timeout
) {
709 i2c_pxa_handler(0, i2c
);
713 i2c_pxa_stop_message(i2c
);
716 * We place the return code in i2c->msg_idx.
722 i2c_pxa_scream_blue_murder(i2c
, "timeout");
728 * We are protected by the adapter bus mutex.
730 static int i2c_pxa_do_xfer(struct pxa_i2c
*i2c
, struct i2c_msg
*msg
, int num
)
736 * Wait for the bus to become free.
738 ret
= i2c_pxa_wait_bus_not_busy(i2c
);
740 dev_err(&i2c
->adap
.dev
, "i2c_pxa: timeout waiting for bus free\n");
747 ret
= i2c_pxa_set_master(i2c
);
749 dev_err(&i2c
->adap
.dev
, "i2c_pxa_set_master: error %d\n", ret
);
753 spin_lock_irq(&i2c
->lock
);
761 i2c_pxa_start_message(i2c
);
763 spin_unlock_irq(&i2c
->lock
);
766 * The rest of the processing occurs in the interrupt handler.
768 timeout
= wait_event_timeout(i2c
->wait
, i2c
->msg_num
== 0, HZ
* 5);
769 i2c_pxa_stop_message(i2c
);
772 * We place the return code in i2c->msg_idx.
776 if (!timeout
&& i2c
->msg_num
) {
777 i2c_pxa_scream_blue_murder(i2c
, "timeout");
785 static int i2c_pxa_pio_xfer(struct i2c_adapter
*adap
,
786 struct i2c_msg msgs
[], int num
)
788 struct pxa_i2c
*i2c
= adap
->algo_data
;
791 /* If the I2C controller is disabled we need to reset it
792 (probably due to a suspend/resume destroying state). We do
793 this here as we can then avoid worrying about resuming the
794 controller before its users. */
795 if (!(readl(_ICR(i2c
)) & ICR_IUE
))
798 for (i
= adap
->retries
; i
>= 0; i
--) {
799 ret
= i2c_pxa_do_pio_xfer(i2c
, msgs
, num
);
800 if (ret
!= I2C_RETRY
)
804 dev_dbg(&adap
->dev
, "Retrying transmission\n");
807 i2c_pxa_scream_blue_murder(i2c
, "exhausted retries");
810 i2c_pxa_set_slave(i2c
, ret
);
815 * i2c_pxa_master_complete - complete the message and wake up.
817 static void i2c_pxa_master_complete(struct pxa_i2c
*i2c
, int ret
)
829 static void i2c_pxa_irq_txempty(struct pxa_i2c
*i2c
, u32 isr
)
831 u32 icr
= readl(_ICR(i2c
)) & ~(ICR_START
|ICR_STOP
|ICR_ACKNAK
|ICR_TB
);
835 * If ISR_ALD is set, we lost arbitration.
839 * Do we need to do anything here? The PXA docs
840 * are vague about what happens.
842 i2c_pxa_scream_blue_murder(i2c
, "ALD set");
845 * We ignore this error. We seem to see spurious ALDs
846 * for seemingly no reason. If we handle them as I think
847 * they should, we end up causing an I2C error, which
848 * is painful for some systems.
857 * I2C bus error - either the device NAK'd us, or
858 * something more serious happened. If we were NAK'd
859 * on the initial address phase, we can retry.
861 if (isr
& ISR_ACKNAK
) {
862 if (i2c
->msg_ptr
== 0 && i2c
->msg_idx
== 0)
867 i2c_pxa_master_complete(i2c
, ret
);
868 } else if (isr
& ISR_RWM
) {
870 * Read mode. We have just sent the address byte, and
871 * now we must initiate the transfer.
873 if (i2c
->msg_ptr
== i2c
->msg
->len
- 1 &&
874 i2c
->msg_idx
== i2c
->msg_num
- 1)
875 icr
|= ICR_STOP
| ICR_ACKNAK
;
877 icr
|= ICR_ALDIE
| ICR_TB
;
878 } else if (i2c
->msg_ptr
< i2c
->msg
->len
) {
880 * Write mode. Write the next data byte.
882 writel(i2c
->msg
->buf
[i2c
->msg_ptr
++], _IDBR(i2c
));
884 icr
|= ICR_ALDIE
| ICR_TB
;
887 * If this is the last byte of the last message, send
890 if (i2c
->msg_ptr
== i2c
->msg
->len
&&
891 i2c
->msg_idx
== i2c
->msg_num
- 1)
893 } else if (i2c
->msg_idx
< i2c
->msg_num
- 1) {
895 * Next segment of the message.
902 * If we aren't doing a repeated start and address,
903 * go back and try to send the next byte. Note that
904 * we do not support switching the R/W direction here.
906 if (i2c
->msg
->flags
& I2C_M_NOSTART
)
910 * Write the next address.
912 writel(i2c_pxa_addr_byte(i2c
->msg
), _IDBR(i2c
));
915 * And trigger a repeated start, and send the byte.
918 icr
|= ICR_START
| ICR_TB
;
920 if (i2c
->msg
->len
== 0) {
922 * Device probes have a message length of zero
923 * and need the bus to be reset before it can
928 i2c_pxa_master_complete(i2c
, 0);
931 i2c
->icrlog
[i2c
->irqlogidx
-1] = icr
;
933 writel(icr
, _ICR(i2c
));
937 static void i2c_pxa_irq_rxfull(struct pxa_i2c
*i2c
, u32 isr
)
939 u32 icr
= readl(_ICR(i2c
)) & ~(ICR_START
|ICR_STOP
|ICR_ACKNAK
|ICR_TB
);
944 i2c
->msg
->buf
[i2c
->msg_ptr
++] = readl(_IDBR(i2c
));
946 if (i2c
->msg_ptr
< i2c
->msg
->len
) {
948 * If this is the last byte of the last
949 * message, send a STOP.
951 if (i2c
->msg_ptr
== i2c
->msg
->len
- 1)
952 icr
|= ICR_STOP
| ICR_ACKNAK
;
954 icr
|= ICR_ALDIE
| ICR_TB
;
956 i2c_pxa_master_complete(i2c
, 0);
959 i2c
->icrlog
[i2c
->irqlogidx
-1] = icr
;
961 writel(icr
, _ICR(i2c
));
964 #define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
966 static irqreturn_t
i2c_pxa_handler(int this_irq
, void *dev_id
)
968 struct pxa_i2c
*i2c
= dev_id
;
969 u32 isr
= readl(_ISR(i2c
));
971 if (!(isr
& VALID_INT_SOURCE
))
974 if (i2c_debug
> 2 && 0) {
975 dev_dbg(&i2c
->adap
.dev
, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
976 __func__
, isr
, readl(_ICR(i2c
)), readl(_IBMR(i2c
)));
980 if (i2c
->irqlogidx
< ARRAY_SIZE(i2c
->isrlog
))
981 i2c
->isrlog
[i2c
->irqlogidx
++] = isr
;
986 * Always clear all pending IRQs.
988 writel(isr
& VALID_INT_SOURCE
, _ISR(i2c
));
991 i2c_pxa_slave_start(i2c
, isr
);
993 i2c_pxa_slave_stop(i2c
);
995 if (i2c_pxa_is_slavemode(i2c
)) {
997 i2c_pxa_slave_txempty(i2c
, isr
);
999 i2c_pxa_slave_rxfull(i2c
, isr
);
1000 } else if (i2c
->msg
) {
1002 i2c_pxa_irq_txempty(i2c
, isr
);
1004 i2c_pxa_irq_rxfull(i2c
, isr
);
1006 i2c_pxa_scream_blue_murder(i2c
, "spurious irq");
1013 static int i2c_pxa_xfer(struct i2c_adapter
*adap
, struct i2c_msg msgs
[], int num
)
1015 struct pxa_i2c
*i2c
= adap
->algo_data
;
1018 for (i
= adap
->retries
; i
>= 0; i
--) {
1019 ret
= i2c_pxa_do_xfer(i2c
, msgs
, num
);
1020 if (ret
!= I2C_RETRY
)
1024 dev_dbg(&adap
->dev
, "Retrying transmission\n");
1027 i2c_pxa_scream_blue_murder(i2c
, "exhausted retries");
1030 i2c_pxa_set_slave(i2c
, ret
);
1034 static u32
i2c_pxa_functionality(struct i2c_adapter
*adap
)
1036 return I2C_FUNC_I2C
| I2C_FUNC_SMBUS_EMUL
;
1039 static const struct i2c_algorithm i2c_pxa_algorithm
= {
1040 .master_xfer
= i2c_pxa_xfer
,
1041 .functionality
= i2c_pxa_functionality
,
1044 static const struct i2c_algorithm i2c_pxa_pio_algorithm
= {
1045 .master_xfer
= i2c_pxa_pio_xfer
,
1046 .functionality
= i2c_pxa_functionality
,
1049 static struct of_device_id i2c_pxa_dt_ids
[] = {
1050 { .compatible
= "mrvl,pxa-i2c", .data
= (void *)REGS_PXA2XX
},
1051 { .compatible
= "mrvl,pwri2c", .data
= (void *)REGS_PXA3XX
},
1052 { .compatible
= "mrvl,mmp-twsi", .data
= (void *)REGS_PXA2XX
},
1055 MODULE_DEVICE_TABLE(of
, i2c_pxa_dt_ids
);
1057 static int i2c_pxa_probe_dt(struct platform_device
*pdev
, struct pxa_i2c
*i2c
,
1058 enum pxa_i2c_types
*i2c_types
)
1060 struct device_node
*np
= pdev
->dev
.of_node
;
1061 const struct of_device_id
*of_id
=
1062 of_match_device(i2c_pxa_dt_ids
, &pdev
->dev
);
1067 ret
= of_alias_get_id(np
, "i2c");
1069 dev_err(&pdev
->dev
, "failed to get alias id, errno %d\n", ret
);
1073 if (of_get_property(np
, "mrvl,i2c-polling", NULL
))
1075 if (of_get_property(np
, "mrvl,i2c-fast-mode", NULL
))
1077 *i2c_types
= (u32
)(of_id
->data
);
1081 static int i2c_pxa_probe_pdata(struct platform_device
*pdev
,
1082 struct pxa_i2c
*i2c
,
1083 enum pxa_i2c_types
*i2c_types
)
1085 struct i2c_pxa_platform_data
*plat
= pdev
->dev
.platform_data
;
1086 const struct platform_device_id
*id
= platform_get_device_id(pdev
);
1088 *i2c_types
= id
->driver_data
;
1090 i2c
->use_pio
= plat
->use_pio
;
1091 i2c
->fast_mode
= plat
->fast_mode
;
1096 static int i2c_pxa_probe(struct platform_device
*dev
)
1098 struct i2c_pxa_platform_data
*plat
= dev
->dev
.platform_data
;
1099 enum pxa_i2c_types i2c_type
;
1100 struct pxa_i2c
*i2c
;
1101 struct resource
*res
= NULL
;
1104 i2c
= kzalloc(sizeof(struct pxa_i2c
), GFP_KERNEL
);
1110 ret
= i2c_pxa_probe_dt(dev
, i2c
, &i2c_type
);
1112 ret
= i2c_pxa_probe_pdata(dev
, i2c
, &i2c_type
);
1116 res
= platform_get_resource(dev
, IORESOURCE_MEM
, 0);
1117 irq
= platform_get_irq(dev
, 0);
1118 if (res
== NULL
|| irq
< 0) {
1123 if (!request_mem_region(res
->start
, resource_size(res
), res
->name
)) {
1128 i2c
->adap
.owner
= THIS_MODULE
;
1129 i2c
->adap
.retries
= 5;
1131 spin_lock_init(&i2c
->lock
);
1132 init_waitqueue_head(&i2c
->wait
);
1135 * If "dev->id" is negative we consider it as zero.
1136 * The reason to do so is to avoid sysfs names that only make
1137 * sense when there are multiple adapters.
1139 i2c
->adap
.nr
= dev
->id
;
1140 snprintf(i2c
->adap
.name
, sizeof(i2c
->adap
.name
), "pxa_i2c-i2c.%u",
1143 i2c
->clk
= clk_get(&dev
->dev
, NULL
);
1144 if (IS_ERR(i2c
->clk
)) {
1145 ret
= PTR_ERR(i2c
->clk
);
1149 i2c
->reg_base
= ioremap(res
->start
, resource_size(res
));
1150 if (!i2c
->reg_base
) {
1155 i2c
->reg_ibmr
= i2c
->reg_base
+ pxa_reg_layout
[i2c_type
].ibmr
;
1156 i2c
->reg_idbr
= i2c
->reg_base
+ pxa_reg_layout
[i2c_type
].idbr
;
1157 i2c
->reg_icr
= i2c
->reg_base
+ pxa_reg_layout
[i2c_type
].icr
;
1158 i2c
->reg_isr
= i2c
->reg_base
+ pxa_reg_layout
[i2c_type
].isr
;
1159 if (i2c_type
!= REGS_CE4100
)
1160 i2c
->reg_isar
= i2c
->reg_base
+ pxa_reg_layout
[i2c_type
].isar
;
1162 i2c
->iobase
= res
->start
;
1163 i2c
->iosize
= resource_size(res
);
1167 i2c
->slave_addr
= I2C_PXA_SLAVE_ADDR
;
1170 #ifdef CONFIG_I2C_PXA_SLAVE
1171 i2c
->slave_addr
= plat
->slave_addr
;
1172 i2c
->slave
= plat
->slave
;
1174 i2c
->adap
.class = plat
->class;
1177 clk_enable(i2c
->clk
);
1180 i2c
->adap
.algo
= &i2c_pxa_pio_algorithm
;
1182 i2c
->adap
.algo
= &i2c_pxa_algorithm
;
1183 ret
= request_irq(irq
, i2c_pxa_handler
, IRQF_SHARED
,
1184 i2c
->adap
.name
, i2c
);
1191 i2c
->adap
.algo_data
= i2c
;
1192 i2c
->adap
.dev
.parent
= &dev
->dev
;
1194 i2c
->adap
.dev
.of_node
= dev
->dev
.of_node
;
1197 ret
= i2c_add_numbered_adapter(&i2c
->adap
);
1199 printk(KERN_INFO
"I2C: Failed to add bus\n");
1202 of_i2c_register_devices(&i2c
->adap
);
1204 platform_set_drvdata(dev
, i2c
);
1206 #ifdef CONFIG_I2C_PXA_SLAVE
1207 printk(KERN_INFO
"I2C: %s: PXA I2C adapter, slave address %d\n",
1208 dev_name(&i2c
->adap
.dev
), i2c
->slave_addr
);
1210 printk(KERN_INFO
"I2C: %s: PXA I2C adapter\n",
1211 dev_name(&i2c
->adap
.dev
));
1219 clk_disable(i2c
->clk
);
1220 iounmap(i2c
->reg_base
);
1226 release_mem_region(res
->start
, resource_size(res
));
1230 static int __exit
i2c_pxa_remove(struct platform_device
*dev
)
1232 struct pxa_i2c
*i2c
= platform_get_drvdata(dev
);
1234 platform_set_drvdata(dev
, NULL
);
1236 i2c_del_adapter(&i2c
->adap
);
1238 free_irq(i2c
->irq
, i2c
);
1240 clk_disable(i2c
->clk
);
1243 iounmap(i2c
->reg_base
);
1244 release_mem_region(i2c
->iobase
, i2c
->iosize
);
1251 static int i2c_pxa_suspend_noirq(struct device
*dev
)
1253 struct platform_device
*pdev
= to_platform_device(dev
);
1254 struct pxa_i2c
*i2c
= platform_get_drvdata(pdev
);
1256 clk_disable(i2c
->clk
);
1261 static int i2c_pxa_resume_noirq(struct device
*dev
)
1263 struct platform_device
*pdev
= to_platform_device(dev
);
1264 struct pxa_i2c
*i2c
= platform_get_drvdata(pdev
);
1266 clk_enable(i2c
->clk
);
1272 static const struct dev_pm_ops i2c_pxa_dev_pm_ops
= {
1273 .suspend_noirq
= i2c_pxa_suspend_noirq
,
1274 .resume_noirq
= i2c_pxa_resume_noirq
,
1277 #define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops)
1279 #define I2C_PXA_DEV_PM_OPS NULL
1282 static struct platform_driver i2c_pxa_driver
= {
1283 .probe
= i2c_pxa_probe
,
1284 .remove
= __exit_p(i2c_pxa_remove
),
1286 .name
= "pxa2xx-i2c",
1287 .owner
= THIS_MODULE
,
1288 .pm
= I2C_PXA_DEV_PM_OPS
,
1289 .of_match_table
= i2c_pxa_dt_ids
,
1291 .id_table
= i2c_pxa_id_table
,
1294 static int __init
i2c_adap_pxa_init(void)
1296 return platform_driver_register(&i2c_pxa_driver
);
1299 static void __exit
i2c_adap_pxa_exit(void)
1301 platform_driver_unregister(&i2c_pxa_driver
);
1304 MODULE_LICENSE("GPL");
1305 MODULE_ALIAS("platform:pxa2xx-i2c");
1307 subsys_initcall(i2c_adap_pxa_init
);
1308 module_exit(i2c_adap_pxa_exit
);