4 * Copyright (C) 2008-2009 ST-Ericsson AB
5 * License terms: GNU General Public License (GPL) version 2
6 * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
7 * Author: Linus Walleij <linus.walleij@stericsson.com>
9 #include <linux/module.h>
10 #include <linux/types.h>
11 #include <linux/watchdog.h>
12 #include <linux/interrupt.h>
14 #include <linux/platform_device.h>
16 #include <linux/bitops.h>
17 #include <linux/clk.h>
18 #include <linux/delay.h>
19 #include <linux/err.h>
21 #define DRV_NAME "WDOG COH 901 327"
24 * COH 901 327 register definitions
27 /* WDOG_FEED Register 32bit (-/W) */
28 #define U300_WDOG_FR 0x00
29 #define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
30 /* WDOG_TIMEOUT Register 32bit (R/W) */
31 #define U300_WDOG_TR 0x04
32 #define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
33 /* WDOG_DISABLE1 Register 32bit (-/W) */
34 #define U300_WDOG_D1R 0x08
35 #define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
36 /* WDOG_DISABLE2 Register 32bit (R/W) */
37 #define U300_WDOG_D2R 0x0C
38 #define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
39 #define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
40 #define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
41 /* WDOG_STATUS Register 32bit (R/W) */
42 #define U300_WDOG_SR 0x10
43 #define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
44 #define U300_WDOG_SR_STATUS_NORMAL 0x0000U
45 #define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
46 /* WDOG_COUNT Register 32bit (R/-) */
47 #define U300_WDOG_CR 0x14
48 #define U300_WDOG_CR_VALID_IND 0x8000U
49 #define U300_WDOG_CR_VALID_STABLE 0x0000U
50 #define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
51 /* WDOG_JTAGOVR Register 32bit (R/W) */
52 #define U300_WDOG_JOR 0x18
53 #define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
54 #define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
55 /* WDOG_RESTART Register 32bit (-/W) */
56 #define U300_WDOG_RR 0x1C
57 #define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
58 /* WDOG_IRQ_EVENT Register 32bit (R/W) */
59 #define U300_WDOG_IER 0x20
60 #define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
61 #define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
62 /* WDOG_IRQ_MASK Register 32bit (R/W) */
63 #define U300_WDOG_IMR 0x24
64 #define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
65 /* WDOG_IRQ_FORCE Register 32bit (R/W) */
66 #define U300_WDOG_IFR 0x28
67 #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
69 /* Default timeout in seconds = 1 minute */
70 static unsigned int margin
= 60;
72 static void __iomem
*virtbase
;
73 static struct device
*parent
;
75 static struct clk
*clk
;
78 * Enabling and disabling functions.
80 static void coh901327_enable(u16 timeout
)
84 unsigned long delay_ns
;
86 /* Restart timer if it is disabled */
87 val
= readw(virtbase
+ U300_WDOG_D2R
);
88 if (val
== U300_WDOG_D2R_DISABLE_STATUS_DISABLED
)
89 writew(U300_WDOG_RR_RESTART_VALUE_RESUME
,
90 virtbase
+ U300_WDOG_RR
);
91 /* Acknowledge any pending interrupt so it doesn't just fire off */
92 writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE
,
93 virtbase
+ U300_WDOG_IER
);
95 * The interrupt is cleared in the 32 kHz clock domain.
96 * Wait 3 32 kHz cycles for it to take effect
98 freq
= clk_get_rate(clk
);
99 delay_ns
= DIV_ROUND_UP(1000000000, freq
); /* Freq to ns and round up */
100 delay_ns
= 3 * delay_ns
; /* Wait 3 cycles */
102 /* Enable the watchdog interrupt */
103 writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE
, virtbase
+ U300_WDOG_IMR
);
104 /* Activate the watchdog timer */
105 writew(timeout
, virtbase
+ U300_WDOG_TR
);
106 /* Start the watchdog timer */
107 writew(U300_WDOG_FR_FEED_RESTART_TIMER
, virtbase
+ U300_WDOG_FR
);
109 * Extra read so that this change propagate in the watchdog.
111 (void) readw(virtbase
+ U300_WDOG_CR
);
112 val
= readw(virtbase
+ U300_WDOG_D2R
);
113 if (val
!= U300_WDOG_D2R_DISABLE_STATUS_ENABLED
)
115 "%s(): watchdog not enabled! D2R value %04x\n",
119 static void coh901327_disable(void)
123 /* Disable the watchdog interrupt if it is active */
124 writew(0x0000U
, virtbase
+ U300_WDOG_IMR
);
125 /* If the watchdog is currently enabled, attempt to disable it */
126 val
= readw(virtbase
+ U300_WDOG_D2R
);
127 if (val
!= U300_WDOG_D2R_DISABLE_STATUS_DISABLED
) {
128 writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER
,
129 virtbase
+ U300_WDOG_D1R
);
130 writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER
,
131 virtbase
+ U300_WDOG_D2R
);
132 /* Write this twice (else problems occur) */
133 writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER
,
134 virtbase
+ U300_WDOG_D2R
);
136 val
= readw(virtbase
+ U300_WDOG_D2R
);
137 if (val
!= U300_WDOG_D2R_DISABLE_STATUS_DISABLED
)
139 "%s(): watchdog not disabled! D2R value %04x\n",
143 static int coh901327_start(struct watchdog_device
*wdt_dev
)
145 coh901327_enable(wdt_dev
->timeout
* 100);
149 static int coh901327_stop(struct watchdog_device
*wdt_dev
)
155 static int coh901327_ping(struct watchdog_device
*wdd
)
157 /* Feed the watchdog */
158 writew(U300_WDOG_FR_FEED_RESTART_TIMER
,
159 virtbase
+ U300_WDOG_FR
);
163 static int coh901327_settimeout(struct watchdog_device
*wdt_dev
,
166 wdt_dev
->timeout
= time
;
167 /* Set new timeout value */
168 writew(time
* 100, virtbase
+ U300_WDOG_TR
);
170 writew(U300_WDOG_FR_FEED_RESTART_TIMER
,
171 virtbase
+ U300_WDOG_FR
);
175 static unsigned int coh901327_gettimeleft(struct watchdog_device
*wdt_dev
)
179 /* Read repeatedly until the value is stable! */
180 val
= readw(virtbase
+ U300_WDOG_CR
);
181 while (val
& U300_WDOG_CR_VALID_IND
)
182 val
= readw(virtbase
+ U300_WDOG_CR
);
183 val
&= U300_WDOG_CR_COUNT_VALUE_MASK
;
191 * This interrupt occurs 10 ms before the watchdog WILL bark.
193 static irqreturn_t
coh901327_interrupt(int irq
, void *data
)
198 * Ack IRQ? If this occurs we're FUBAR anyway, so
199 * just acknowledge, disable the interrupt and await the imminent end.
200 * If you at some point need a host of callbacks to be called
201 * when the system is about to watchdog-reset, add them here!
203 * NOTE: on future versions of this IP-block, it will be possible
204 * to prevent a watchdog reset by feeding the watchdog at this
207 val
= readw(virtbase
+ U300_WDOG_IER
);
208 if (val
== U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND
)
209 writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE
,
210 virtbase
+ U300_WDOG_IER
);
211 writew(0x0000U
, virtbase
+ U300_WDOG_IMR
);
212 dev_crit(parent
, "watchdog is barking!\n");
216 static const struct watchdog_info coh901327_ident
= {
217 .options
= WDIOF_CARDRESET
| WDIOF_SETTIMEOUT
| WDIOF_KEEPALIVEPING
,
218 .identity
= DRV_NAME
,
221 static struct watchdog_ops coh901327_ops
= {
222 .owner
= THIS_MODULE
,
223 .start
= coh901327_start
,
224 .stop
= coh901327_stop
,
225 .ping
= coh901327_ping
,
226 .set_timeout
= coh901327_settimeout
,
227 .get_timeleft
= coh901327_gettimeleft
,
230 static struct watchdog_device coh901327_wdt
= {
231 .info
= &coh901327_ident
,
232 .ops
= &coh901327_ops
,
234 * Max timeout is 327 since the 10ms
235 * timeout register is max
236 * 0x7FFF = 327670ms ~= 327s.
242 static int __exit
coh901327_remove(struct platform_device
*pdev
)
244 watchdog_unregister_device(&coh901327_wdt
);
247 clk_disable_unprepare(clk
);
252 static int __init
coh901327_probe(struct platform_device
*pdev
)
254 struct device
*dev
= &pdev
->dev
;
257 struct resource
*res
;
261 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
262 virtbase
= devm_ioremap_resource(dev
, res
);
263 if (IS_ERR(virtbase
))
264 return PTR_ERR(virtbase
);
266 clk
= clk_get(dev
, NULL
);
269 dev_err(dev
, "could not get clock\n");
272 ret
= clk_prepare_enable(clk
);
274 dev_err(dev
, "could not prepare and enable clock\n");
275 goto out_no_clk_enable
;
278 val
= readw(virtbase
+ U300_WDOG_SR
);
280 case U300_WDOG_SR_STATUS_TIMED_OUT
:
281 dev_info(dev
, "watchdog timed out since last chip reset!\n");
282 coh901327_wdt
.bootstatus
|= WDIOF_CARDRESET
;
283 /* Status will be cleared below */
285 case U300_WDOG_SR_STATUS_NORMAL
:
286 dev_info(dev
, "in normal status, no timeouts have occurred.\n");
289 dev_info(dev
, "contains an illegal status code (%08x)\n", val
);
293 val
= readw(virtbase
+ U300_WDOG_D2R
);
295 case U300_WDOG_D2R_DISABLE_STATUS_DISABLED
:
296 dev_info(dev
, "currently disabled.\n");
298 case U300_WDOG_D2R_DISABLE_STATUS_ENABLED
:
299 dev_info(dev
, "currently enabled! (disabling it now)\n");
303 dev_err(dev
, "contains an illegal enable/disable code (%08x)\n",
308 /* Reset the watchdog */
309 writew(U300_WDOG_SR_RESET_STATUS_RESET
, virtbase
+ U300_WDOG_SR
);
311 irq
= platform_get_irq(pdev
, 0);
312 if (request_irq(irq
, coh901327_interrupt
, 0,
313 DRV_NAME
" Bark", pdev
)) {
318 ret
= watchdog_init_timeout(&coh901327_wdt
, margin
, dev
);
320 coh901327_wdt
.timeout
= 60;
322 coh901327_wdt
.parent
= dev
;
323 ret
= watchdog_register_device(&coh901327_wdt
);
327 dev_info(dev
, "initialized. timer margin=%d sec\n", margin
);
333 clk_disable_unprepare(clk
);
341 static u16 wdogenablestore
;
342 static u16 irqmaskstore
;
344 static int coh901327_suspend(struct platform_device
*pdev
, pm_message_t state
)
346 irqmaskstore
= readw(virtbase
+ U300_WDOG_IMR
) & 0x0001U
;
347 wdogenablestore
= readw(virtbase
+ U300_WDOG_D2R
);
348 /* If watchdog is on, disable it here and now */
349 if (wdogenablestore
== U300_WDOG_D2R_DISABLE_STATUS_ENABLED
)
354 static int coh901327_resume(struct platform_device
*pdev
)
356 /* Restore the watchdog interrupt */
357 writew(irqmaskstore
, virtbase
+ U300_WDOG_IMR
);
358 if (wdogenablestore
== U300_WDOG_D2R_DISABLE_STATUS_ENABLED
) {
359 /* Restart the watchdog timer */
360 writew(U300_WDOG_RR_RESTART_VALUE_RESUME
,
361 virtbase
+ U300_WDOG_RR
);
362 writew(U300_WDOG_FR_FEED_RESTART_TIMER
,
363 virtbase
+ U300_WDOG_FR
);
368 #define coh901327_suspend NULL
369 #define coh901327_resume NULL
373 * Mistreating the watchdog is the only way to perform a software reset of the
374 * system on EMP platforms. So we implement this and export a symbol for it.
376 void coh901327_watchdog_reset(void)
378 /* Enable even if on JTAG too */
379 writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE
,
380 virtbase
+ U300_WDOG_JOR
);
382 * Timeout = 5s, we have to wait for the watchdog reset to
383 * actually take place: the watchdog will be reloaded with the
384 * default value immediately, so we HAVE to reboot and get back
385 * into the kernel in 30s, or the device will reboot again!
386 * The boot loader will typically deactivate the watchdog, so we
387 * need time enough for the boot loader to get to the point of
388 * deactivating the watchdog before it is shut down by it.
390 * NOTE: on future versions of the watchdog, this restriction is
391 * gone: the watchdog will be reloaded with a default value (1 min)
392 * instead of last value, and you can conveniently set the watchdog
393 * timeout to 10ms (value = 1) without any problems.
395 coh901327_enable(500);
396 /* Return and await doom */
399 static const struct of_device_id coh901327_dt_match
[] = {
400 { .compatible
= "stericsson,coh901327" },
404 static struct platform_driver coh901327_driver
= {
406 .name
= "coh901327_wdog",
407 .of_match_table
= coh901327_dt_match
,
409 .remove
= __exit_p(coh901327_remove
),
410 .suspend
= coh901327_suspend
,
411 .resume
= coh901327_resume
,
414 module_platform_driver_probe(coh901327_driver
, coh901327_probe
);
416 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
417 MODULE_DESCRIPTION("COH 901 327 Watchdog");
419 module_param(margin
, uint
, 0);
420 MODULE_PARM_DESC(margin
, "Watchdog margin in seconds (default 60s)");
422 MODULE_LICENSE("GPL");
423 MODULE_ALIAS("platform:coh901327-watchdog");