Linux 2.6.20.13
[linux/fpc-iii.git] / include / asm-arm / arch-pnx4008 / i2c.h
blob92e8d65006f703158d147a0057e53af32515bb9a
1 /*
2 * PNX4008-specific tweaks for I2C IP3204 block
4 * Author: Vitaly Wool <vwool@ru.mvista.com>
6 * 2005 (c) MontaVista Software, Inc. This file is licensed under
7 * the terms of the GNU General Public License version 2. This program
8 * is licensed "as is" without any warranty of any kind, whether express
9 * or implied.
12 #ifndef __ASM_ARCH_I2C_H__
13 #define __ASM_ARCH_I2C_H__
15 #include <linux/pm.h>
16 #include <linux/platform_device.h>
18 enum {
19 mstatus_tdi = 0x00000001,
20 mstatus_afi = 0x00000002,
21 mstatus_nai = 0x00000004,
22 mstatus_drmi = 0x00000008,
23 mstatus_active = 0x00000020,
24 mstatus_scl = 0x00000040,
25 mstatus_sda = 0x00000080,
26 mstatus_rff = 0x00000100,
27 mstatus_rfe = 0x00000200,
28 mstatus_tff = 0x00000400,
29 mstatus_tfe = 0x00000800,
32 enum {
33 mcntrl_tdie = 0x00000001,
34 mcntrl_afie = 0x00000002,
35 mcntrl_naie = 0x00000004,
36 mcntrl_drmie = 0x00000008,
37 mcntrl_daie = 0x00000020,
38 mcntrl_rffie = 0x00000040,
39 mcntrl_tffie = 0x00000080,
40 mcntrl_reset = 0x00000100,
41 mcntrl_cdbmode = 0x00000400,
44 enum {
45 rw_bit = 1 << 0,
46 start_bit = 1 << 8,
47 stop_bit = 1 << 9,
50 #define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
51 #define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
52 #define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
53 #define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
54 #define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
55 #define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
56 #define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
57 #define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
58 #define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
59 #define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
60 #define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
61 #define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
62 #define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
64 #define HCLK_MHZ 13
65 #define I2C_CHIP_NAME "PNX4008-I2C"
67 #endif /* __ASM_ARCH_I2C_H___ */