?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 2.6.20.13
[linux/fpc-iii.git] / include / asm-arm / arch-sa1100 / SA-1100.h
blob62aaf04a390674b477c6d063165641ef428d3c53
1 /*
2 * FILE SA-1100.h
3 *
4 * Version 1.2
5 * Author Copyright (c) Marc A. Viredaz, 1998
6 * DEC Western Research Laboratory, Palo Alto, CA
7 * Date January 1998 (April 1997)
8 * System StrongARM SA-1100
9 * Language C or ARM Assembly
10 * Purpose Definition of constants related to the StrongARM
11 * SA-1100 microprocessor (Advanced RISC Machine (ARM)
12 * architecture version 4). This file is based on the
13 * StrongARM SA-1100 data sheet version 2.2.
14 *
15 */
16
17
18 /* Be sure that virtual mapping is defined right */
19 #ifndef __ASM_ARCH_HARDWARE_H
20 #error You must include hardware.h not SA-1100.h
21 #endif
22
23 #include "bitfield.h"
24
25 /*
26 * SA1100 CS line to physical address
27 */
28
29 #define SA1100_CS0_PHYS 0x00000000
30 #define SA1100_CS1_PHYS 0x08000000
31 #define SA1100_CS2_PHYS 0x10000000
32 #define SA1100_CS3_PHYS 0x18000000
33 #define SA1100_CS4_PHYS 0x40000000
34 #define SA1100_CS5_PHYS 0x48000000
35
36 /*
37 * Personal Computer Memory Card International Association (PCMCIA) sockets
38 */
39
40 #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
41 #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
42 #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
43 #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
44 #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
45
46 #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
47 #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
48 #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
49 #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
50
51 #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
52 #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
53 #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
54 #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
55
56 #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
57 (0x20000000 + (Nb)*PCMCIASp)
58 #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
59 #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
60 (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
61 #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
62 (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
63
64 #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
65 #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
66 #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
67 #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
68
69 #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
70 #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
71 #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
72 #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
73
74
75 /*
76 * Universal Serial Bus (USB) Device Controller (UDC) control registers
77 *
78 * Registers
79 * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device
80 * Controller (UDC) Control Register (read/write).
81 * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device
82 * Controller (UDC) Address Register (read/write).
83 * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device
84 * Controller (UDC) Output Maximum Packet size register
85 * (read/write).
86 * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device
87 * Controller (UDC) Input Maximum Packet size register
88 * (read/write).
89 * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device
90 * Controller (UDC) Control/Status register end-point 0
91 * (read/write).
92 * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device
93 * Controller (UDC) Control/Status register end-point 1
94 * (output, read/write).
95 * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device
96 * Controller (UDC) Control/Status register end-point 2
97 * (input, read/write).
98 * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device
99 * Controller (UDC) Data register end-point 0
100 * (read/write).
101 * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device
102 * Controller (UDC) Write Count register end-point 0
103 * (read).
104 * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device
105 * Controller (UDC) Data Register (read/write).
106 * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device
107 * Controller (UDC) Status Register (read/write).
108 */
109
110 #define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */
111 #define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */
112 #define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */
113 #define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */
114 #define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */
115 #define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
116 #define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
117 #define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */
118 #define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */
119 #define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */
120 #define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */
121
122 #define UDCCR_UDD 0x00000001 /* UDC Disable */
123 #define UDCCR_UDA 0x00000002 /* UDC Active (read) */
124 #define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */
125 #define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */
126 /* (disable) */
127 #define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */
128 /* (disable) */
129 #define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */
130 /* (disable) */
131 #define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */
132 /* (disable) */
133 #define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */
134 #define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */
135
136 #define UDCAR_ADD Fld (7, 0) /* function ADDress */
137
138 #define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */
139 /* [byte] */
140 #define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \
141 /* [1..256 byte] */ \
142 (((Size) - 1) << FShft (UDCOMP_OUTMAXP))
143
144 #define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */
145 /* [byte] */
146 #define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \
147 /* [1..256 byte] */ \
148 (((Size) - 1) << FShft (UDCIMP_INMAXP))
149
150 #define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */
151 #define UDCCS0_IPR 0x00000002 /* Input Packet Ready */
152 #define UDCCS0_SST 0x00000004 /* Sent STall */
153 #define UDCCS0_FST 0x00000008 /* Force STall */
154 #define UDCCS0_DE 0x00000010 /* Data End */
155 #define UDCCS0_SE 0x00000020 /* Setup End (read) */
156 #define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */
157 /* (write) */
158 #define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */
159
160 #define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */
161 /* Service request (read) */
162 #define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */
163 #define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */
164 #define UDCCS1_SST 0x00000008 /* Sent STall */
165 #define UDCCS1_FST 0x00000010 /* Force STall */
166 #define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */
167
168 #define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */
169 /* Service request (read) */
170 #define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */
171 #define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */
172 #define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */
173 #define UDCCS2_SST 0x00000010 /* Sent STall */
174 #define UDCCS2_FST 0x00000020 /* Force STall */
175
176 #define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
177
178 #define UDCWC_WC Fld (4, 0) /* Write Count */
179
180 #define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
181
182 #define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */
183 #define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */
184 #define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */
185 #define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */
186 #define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */
187 #define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */
188
189
190 /*
191 * Universal Asynchronous Receiver/Transmitter (UART) control registers
192 *
193 * Registers
194 * Ser1UTCR0 Serial port 1 Universal Asynchronous
195 * Receiver/Transmitter (UART) Control Register 0
196 * (read/write).
197 * Ser1UTCR1 Serial port 1 Universal Asynchronous
198 * Receiver/Transmitter (UART) Control Register 1
199 * (read/write).
200 * Ser1UTCR2 Serial port 1 Universal Asynchronous
201 * Receiver/Transmitter (UART) Control Register 2
202 * (read/write).
203 * Ser1UTCR3 Serial port 1 Universal Asynchronous
204 * Receiver/Transmitter (UART) Control Register 3
205 * (read/write).
206 * Ser1UTDR Serial port 1 Universal Asynchronous
207 * Receiver/Transmitter (UART) Data Register
208 * (read/write).
209 * Ser1UTSR0 Serial port 1 Universal Asynchronous
210 * Receiver/Transmitter (UART) Status Register 0
211 * (read/write).
212 * Ser1UTSR1 Serial port 1 Universal Asynchronous
213 * Receiver/Transmitter (UART) Status Register 1 (read).
214 *
215 * Ser2UTCR0 Serial port 2 Universal Asynchronous
216 * Receiver/Transmitter (UART) Control Register 0
217 * (read/write).
218 * Ser2UTCR1 Serial port 2 Universal Asynchronous
219 * Receiver/Transmitter (UART) Control Register 1
220 * (read/write).
221 * Ser2UTCR2 Serial port 2 Universal Asynchronous
222 * Receiver/Transmitter (UART) Control Register 2
223 * (read/write).
224 * Ser2UTCR3 Serial port 2 Universal Asynchronous
225 * Receiver/Transmitter (UART) Control Register 3
226 * (read/write).
227 * Ser2UTCR4 Serial port 2 Universal Asynchronous
228 * Receiver/Transmitter (UART) Control Register 4
229 * (read/write).
230 * Ser2UTDR Serial port 2 Universal Asynchronous
231 * Receiver/Transmitter (UART) Data Register
232 * (read/write).
233 * Ser2UTSR0 Serial port 2 Universal Asynchronous
234 * Receiver/Transmitter (UART) Status Register 0
235 * (read/write).
236 * Ser2UTSR1 Serial port 2 Universal Asynchronous
237 * Receiver/Transmitter (UART) Status Register 1 (read).
238 *
239 * Ser3UTCR0 Serial port 3 Universal Asynchronous
240 * Receiver/Transmitter (UART) Control Register 0
241 * (read/write).
242 * Ser3UTCR1 Serial port 3 Universal Asynchronous
243 * Receiver/Transmitter (UART) Control Register 1
244 * (read/write).
245 * Ser3UTCR2 Serial port 3 Universal Asynchronous
246 * Receiver/Transmitter (UART) Control Register 2
247 * (read/write).
248 * Ser3UTCR3 Serial port 3 Universal Asynchronous
249 * Receiver/Transmitter (UART) Control Register 3
250 * (read/write).
251 * Ser3UTDR Serial port 3 Universal Asynchronous
252 * Receiver/Transmitter (UART) Data Register
253 * (read/write).
254 * Ser3UTSR0 Serial port 3 Universal Asynchronous
255 * Receiver/Transmitter (UART) Status Register 0
256 * (read/write).
257 * Ser3UTSR1 Serial port 3 Universal Asynchronous
258 * Receiver/Transmitter (UART) Status Register 1 (read).
259 *
260 * Clocks
261 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
262 * or 3.5795 MHz).
263 * fua, Tua Frequency, period of the UART communication.
264 */
265
266 #define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */
267 #define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */
268 #define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */
269 #define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */
270 #define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */
271 #define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */
272 #define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */
273 #define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */
274
275 #define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */
276 #define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */
277 #define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */
278 #define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */
279 #define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */
280 #define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */
281 #define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */
282
283 #define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */
284 #define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */
285 #define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */
286 #define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */
287 #define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */
288 #define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */
289 #define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */
290 #define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */
291
292 #define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */
293 #define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */
294 #define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */
295 #define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */
296 #define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */
297 #define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */
298 #define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */
299
300 /* Those are still used in some places */
301 #define _Ser1UTCR0 __PREG(Ser1UTCR0)
302 #define _Ser2UTCR0 __PREG(Ser2UTCR0)
303 #define _Ser3UTCR0 __PREG(Ser3UTCR0)
304
305 /* Register offsets */
306 #define UTCR0 0x00
307 #define UTCR1 0x04
308 #define UTCR2 0x08
309 #define UTCR3 0x0c
310 #define UTDR 0x14
311 #define UTSR0 0x1c
312 #define UTSR1 0x20
313
314 #define UTCR0_PE 0x00000001 /* Parity Enable */
315 #define UTCR0_OES 0x00000002 /* Odd/Even parity Select */
316 #define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */
317 #define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */
318 #define UTCR0_SBS 0x00000004 /* Stop Bit Select */
319 #define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */
320 #define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */
321 #define UTCR0_DSS 0x00000008 /* Data Size Select */
322 #define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */
323 #define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */
324 #define UTCR0_SCE 0x00000010 /* Sample Clock Enable */
325 /* (ser. port 1: GPIO [18], */
326 /* ser. port 3: GPIO [20]) */
327 #define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */
328 #define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */
329 #define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */
330 #define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */
331 #define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */
332 #define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */
333 #define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \
334 (UTCR0_1StpBit + UTCR0_8BitData)
335
336 #define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
337 #define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
338 /* fua = fxtl/(16*(BRD[11:0] + 1)) */
339 /* Tua = 16*(BRD [11:0] + 1)*Txtl */
340 #define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
341 (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
342 FShft (UTCR1_BRD))
343 #define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
344 (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
345 FShft (UTCR2_BRD))
346 /* fua = fxtl/(16*Floor (Div/16)) */
347 /* Tua = 16*Floor (Div/16)*Txtl */
348 #define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
349 (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
350 FShft (UTCR1_BRD))
351 #define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
352 (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
353 FShft (UTCR2_BRD))
354 /* fua = fxtl/(16*Ceil (Div/16)) */
355 /* Tua = 16*Ceil (Div/16)*Txtl */
356
357 #define UTCR3_RXE 0x00000001 /* Receive Enable */
358 #define UTCR3_TXE 0x00000002 /* Transmit Enable */
359 #define UTCR3_BRK 0x00000004 /* BReaK mode */
360 #define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
361 /* more Interrupt Enable */
362 #define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
363 /* Interrupt Enable */
364 #define UTCR3_LBM 0x00000020 /* Look-Back Mode */
365 #define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \
366 /* TIE, LBM can be set or cleared) */ \
367 (UTCR3_RXE + UTCR3_TXE)
368
369 #define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */
370 /* (HP-SIR) modulation Enable */
371 #define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */
372 #define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */
373 #define UTCR4_LPM 0x00000002 /* Low-Power Mode */
374 #define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */
375 #define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */
376
377 #define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
378 #if 0 /* Hidden receive FIFO bits */
379 #define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */
380 #define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */
381 #define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
382 #endif /* 0 */
383
384 #define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */
385 /* Service request (read) */
386 #define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */
387 /* more Service request (read) */
388 #define UTSR0_RID 0x00000004 /* Receiver IDle */
389 #define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */
390 #define UTSR0_REB 0x00000010 /* Receive End of Break */
391 #define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */
392
393 #define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
394 #define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */
395 #define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
396 #define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */
397 #define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */
398 #define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */
399
400
401 /*
402 * Synchronous Data Link Controller (SDLC) control registers
403 *
404 * Registers
405 * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC)
406 * Control Register 0 (read/write).
407 * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC)
408 * Control Register 1 (read/write).
409 * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC)
410 * Control Register 2 (read/write).
411 * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC)
412 * Control Register 3 (read/write).
413 * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC)
414 * Control Register 4 (read/write).
415 * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC)
416 * Data Register (read/write).
417 * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC)
418 * Status Register 0 (read/write).
419 * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC)
420 * Status Register 1 (read/write).
421 *
422 * Clocks
423 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
424 * or 3.5795 MHz).
425 * fsd, Tsd Frequency, period of the SDLC communication.
426 */
427
428 #define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */
429 #define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */
430 #define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */
431 #define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */
432 #define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */
433 #define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */
434 #define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */
435 #define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */
436
437 #define SDCR0_SUS 0x00000001 /* SDLC/UART Select */
438 #define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */
439 #define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */
440 #define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */
441 #define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */
442 #define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */
443 #define SDCR0_LBM 0x00000004 /* Look-Back Mode */
444 #define SDCR0_BMS 0x00000008 /* Bit Modulation Select */
445 #define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */
446 #define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */
447 #define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */
448 #define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */
449 /* (GPIO [16]) */
450 #define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */
451 #define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */
452 #define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */
453 #define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */
454 #define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */
455 #define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */
456 #define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */
457 #define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */
458
459 #define SDCR1_AAF 0x00000001 /* Abort After Frame enable */
460 /* (GPIO [17]) */
461 #define SDCR1_TXE 0x00000002 /* Transmit Enable */
462 #define SDCR1_RXE 0x00000004 /* Receive Enable */
463 #define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
464 /* more Interrupt Enable */
465 #define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
466 /* Interrupt Enable */
467 #define SDCR1_AME 0x00000020 /* Address Match Enable */
468 #define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */
469 #define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */
470 #define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */
471 #define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */
472
473 #define SDCR2_AMV Fld (8, 0) /* Address Match Value */
474
475 #define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
476 #define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
477 /* fsd = fxtl/(16*(BRD[11:0] + 1)) */
478 /* Tsd = 16*(BRD[11:0] + 1)*Txtl */
479 #define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
480 (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
481 FShft (SDCR3_BRD))
482 #define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
483 (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
484 FShft (SDCR4_BRD))
485 /* fsd = fxtl/(16*Floor (Div/16)) */
486 /* Tsd = 16*Floor (Div/16)*Txtl */
487 #define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
488 (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
489 FShft (SDCR3_BRD))
490 #define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
491 (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
492 FShft (SDCR4_BRD))
493 /* fsd = fxtl/(16*Ceil (Div/16)) */
494 /* Tsd = 16*Ceil (Div/16)*Txtl */
495
496 #define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
497 #if 0 /* Hidden receive FIFO bits */
498 #define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
499 #define SDDR_CRE 0x00000200 /* receive CRC Error (read) */
500 #define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
501 #endif /* 0 */
502
503 #define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */
504 #define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
505 #define SDSR0_RAB 0x00000004 /* Receive ABort */
506 #define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
507 /* Service request (read) */
508 #define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */
509 /* more Service request (read) */
510
511 #define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
512 #define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */
513 #define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
514 #define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
515 #define SDSR1_RTD 0x00000010 /* Receive Transition Detected */
516 #define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */
517 #define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */
518 #define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */
519
520
521 /*
522 * High-Speed Serial to Parallel controller (HSSP) control registers
523 *
524 * Registers
525 * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel
526 * controller (HSSP) Control Register 0 (read/write).
527 * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel
528 * controller (HSSP) Control Register 1 (read/write).
529 * Ser2HSDR Serial port 2 High-Speed Serial to Parallel
530 * controller (HSSP) Data Register (read/write).
531 * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel
532 * controller (HSSP) Status Register 0 (read/write).
533 * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel
534 * controller (HSSP) Status Register 1 (read).
535 * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel
536 * controller (HSSP) Control Register 2 (read/write).
537 * [The HSCR2 register is only implemented in
538 * versions 2.0 (rev. = 8) and higher of the StrongARM
539 * SA-1100.]
540 */
541
542 #define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */
543 #define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */
544 #define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */
545 #define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */
546 #define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */
547 #define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */
548
549 #define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */
550 #define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */
551 #define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */
552 #define HSCR0_LBM 0x00000002 /* Look-Back Mode */
553 #define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */
554 #define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */
555 #define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */
556 #define HSCR0_TXE 0x00000008 /* Transmit Enable */
557 #define HSCR0_RXE 0x00000010 /* Receive Enable */
558 #define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */
559 /* more Interrupt Enable */
560 #define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */
561 /* Interrupt Enable */
562 #define HSCR0_AME 0x00000080 /* Address Match Enable */
563
564 #define HSCR1_AMV Fld (8, 0) /* Address Match Value */
565
566 #define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
567 #if 0 /* Hidden receive FIFO bits */
568 #define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
569 #define HSDR_CRE 0x00000200 /* receive CRC Error (read) */
570 #define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
571 #endif /* 0 */
572
573 #define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */
574 #define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
575 #define HSSR0_RAB 0x00000004 /* Receive ABort */
576 #define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
577 /* Service request (read) */
578 #define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */
579 /* more Service request (read) */
580 #define HSSR0_FRE 0x00000020 /* receive FRaming Error */
581
582 #define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
583 #define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */
584 #define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
585 #define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
586 #define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */
587 #define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */
588 #define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */
589
590 #define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */
591 #define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */
592 /* (inverted) */
593 #define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */
594 /* (non-inverted) */
595 #define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */
596 #define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */
597 /* (inverted) */
598 #define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */
599 /* (non-inverted) */
600
601
602 /*
603 * Multi-media Communications Port (MCP) control registers
604 *
605 * Registers
606 * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP)
607 * Control Register 0 (read/write).
608 * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP)
609 * Data Register 0 (audio, read/write).
610 * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP)
611 * Data Register 1 (telecom, read/write).
612 * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP)
613 * Data Register 2 (CODEC registers, read/write).
614 * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP)
615 * Status Register (read/write).
616 * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP)
617 * Control Register 1 (read/write).
618 * [The MCCR1 register is only implemented in
619 * versions 2.0 (rev. = 8) and higher of the StrongARM
620 * SA-1100.]
621 *
622 * Clocks
623 * fmc, Tmc Frequency, period of the MCP communication (10 MHz,
624 * 12 MHz, or GPIO [21]).
625 * faud, Taud Frequency, period of the audio sampling.
626 * ftcm, Ttcm Frequency, period of the telecom sampling.
627 */
628
629 #define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */
630 #define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */
631 #define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */
632 #define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
633 #define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */
634 #define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */
635
636 #define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */
637 /* [6..127] */
638 /* faud = fmc/(32*ASD) */
639 /* Taud = 32*ASD*Tmc */
640 #define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \
641 /* [192..4064] */ \
642 ((Div)/32 << FShft (MCCR0_ASD))
643 /* faud = fmc/(32*Floor (Div/32)) */
644 /* Taud = 32*Floor (Div/32)*Tmc */
645 #define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \
646 (((Div) + 31)/32 << FShft (MCCR0_ASD))
647 /* faud = fmc/(32*Ceil (Div/32)) */
648 /* Taud = 32*Ceil (Div/32)*Tmc */
649 #define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */
650 /* Divisor/32 [16..127] */
651 /* ftcm = fmc/(32*TSD) */
652 /* Ttcm = 32*TSD*Tmc */
653 #define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \
654 /* [512..4064] */ \
655 ((Div)/32 << FShft (MCCR0_TSD))
656 /* ftcm = fmc/(32*Floor (Div/32)) */
657 /* Ttcm = 32*Floor (Div/32)*Tmc */
658 #define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \
659 (((Div) + 31)/32 << FShft (MCCR0_TSD))
660 /* ftcm = fmc/(32*Ceil (Div/32)) */
661 /* Ttcm = 32*Ceil (Div/32)*Tmc */
662 #define MCCR0_MCE 0x00010000 /* MCP Enable */
663 #define MCCR0_ECS 0x00020000 /* External Clock Select */
664 #define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */
665 #define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */
666 #define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */
667 /* sampling/storing Mode */
668 #define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */
669 #define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */
670 #define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */
671 /* or less interrupt Enable */
672 #define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */
673 /* or more interrupt Enable */
674 #define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */
675 /* or less interrupt Enable */
676 #define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */
677 /* more interrupt Enable */
678 #define MCCR0_LBM 0x00800000 /* Look-Back Mode */
679 #define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */
680 #define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \
681 (((Div) - 1) << FShft (MCCR0_ECP))
682
683 #define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */
684 /* FIFOs */
685
686 #define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */
687 /* FIFOs */
688
689 /* receive/transmit CODEC reg. */
690 /* FIFOs: */
691 #define MCDR2_DATA Fld (16, 0) /* reg. DATA */
692 #define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */
693 #define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */
694 #define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */
695 #define MCDR2_ADD Fld (4, 17) /* reg. ADDress */
696
697 #define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */
698 /* or less Service request (read) */
699 #define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */
700 /* more Service request (read) */
701 #define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */
702 /* or less Service request (read) */
703 #define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */
704 /* or more Service request (read) */
705 #define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */
706 #define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */
707 #define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */
708 #define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */
709 #define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */
710 /* (read) */
711 #define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */
712 /* (read) */
713 #define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */
714 /* (read) */
715 #define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */
716 /* (read) */
717 #define MCSR_CWC 0x00001000 /* CODEC register Write Completed */
718 /* (read) */
719 #define MCSR_CRC 0x00002000 /* CODEC register Read Completed */
720 /* (read) */
721 #define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */
722 #define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */
723
724 #define MCCR1_CFS 0x00100000 /* Clock Freq. Select */
725 #define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */
726 /* (11.981 MHz) */
727 #define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */
728 /* (9.585 MHz) */
729
730
731 /*
732 * Synchronous Serial Port (SSP) control registers
733 *
734 * Registers
735 * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control
736 * Register 0 (read/write).
737 * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control
738 * Register 1 (read/write).
739 * [Bits SPO and SP are only implemented in versions 2.0
740 * (rev. = 8) and higher of the StrongARM SA-1100.]
741 * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data
742 * Register (read/write).
743 * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status
744 * Register (read/write).
745 *
746 * Clocks
747 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
748 * or 3.5795 MHz).
749 * fss, Tss Frequency, period of the SSP communication.
750 */
751
752 #define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */
753 #define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */
754 #define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */
755 #define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */
756
757 #define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */
758 #define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \
759 (((Size) - 1) << FShft (SSCR0_DSS))
760 #define SSCR0_FRF Fld (2, 4) /* FRame Format */
761 #define SSCR0_Motorola /* Motorola Serial Peripheral */ \
762 /* Interface (SPI) format */ \
763 (0 << FShft (SSCR0_FRF))
764 #define SSCR0_TI /* Texas Instruments Synchronous */ \
765 /* Serial format */ \
766 (1 << FShft (SSCR0_FRF))
767 #define SSCR0_National /* National Microwire format */ \
768 (2 << FShft (SSCR0_FRF))
769 #define SSCR0_SSE 0x00000080 /* SSP Enable */
770 #define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */
771 /* fss = fxtl/(2*(SCR + 1)) */
772 /* Tss = 2*(SCR + 1)*Txtl */
773 #define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \
774 (((Div) - 2)/2 << FShft (SSCR0_SCR))
775 /* fss = fxtl/(2*Floor (Div/2)) */
776 /* Tss = 2*Floor (Div/2)*Txtl */
777 #define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \
778 (((Div) - 1)/2 << FShft (SSCR0_SCR))
779 /* fss = fxtl/(2*Ceil (Div/2)) */
780 /* Tss = 2*Ceil (Div/2)*Txtl */
781
782 #define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */
783 /* Interrupt Enable */
784 #define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */
785 /* Interrupt Enable */
786 #define SSCR1_LBM 0x00000004 /* Look-Back Mode */
787 #define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */
788 #define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */
789 #define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */
790 #define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */
791 #define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */
792 /* after frame (SFRM, 1st edge) */
793 #define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */
794 /* after frame (SFRM, 1st edge) */
795 #define SSCR1_ECS 0x00000020 /* External Clock Select */
796 #define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */
797 #define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */
798
799 #define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */
800
801 #define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */
802 #define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
803 #define SSSR_BSY 0x00000008 /* SSP BuSY (read) */
804 #define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */
805 /* Service request (read) */
806 #define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */
807 /* Service request (read) */
808 #define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */
809
810
811 /*
812 * Operating System (OS) timer control registers
813 *
814 * Registers
815 * OSMR0 Operating System (OS) timer Match Register 0
816 * (read/write).
817 * OSMR1 Operating System (OS) timer Match Register 1
818 * (read/write).
819 * OSMR2 Operating System (OS) timer Match Register 2
820 * (read/write).
821 * OSMR3 Operating System (OS) timer Match Register 3
822 * (read/write).
823 * OSCR Operating System (OS) timer Counter Register
824 * (read/write).
825 * OSSR Operating System (OS) timer Status Register
826 * (read/write).
827 * OWER Operating System (OS) timer Watch-dog Enable Register
828 * (read/write).
829 * OIER Operating System (OS) timer Interrupt Enable Register
830 * (read/write).
831 */
832
833 #define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */
834 #define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */
835 #define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */
836 #define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */
837 #define OSCR __REG(0x90000010) /* OS timer Counter Reg. */
838 #define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */
839 #define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */
840 #define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */
841
842 #define OSSR_M(Nb) /* Match detected [0..3] */ \
843 (0x00000001 << (Nb))
844 #define OSSR_M0 OSSR_M (0) /* Match detected 0 */
845 #define OSSR_M1 OSSR_M (1) /* Match detected 1 */
846 #define OSSR_M2 OSSR_M (2) /* Match detected 2 */
847 #define OSSR_M3 OSSR_M (3) /* Match detected 3 */
848
849 #define OWER_WME 0x00000001 /* Watch-dog Match Enable */
850 /* (set only) */
851
852 #define OIER_E(Nb) /* match interrupt Enable [0..3] */ \
853 (0x00000001 << (Nb))
854 #define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */
855 #define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */
856 #define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */
857 #define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */
858
859
860 /*
861 * Real-Time Clock (RTC) control registers
862 *
863 * Registers
864 * RTAR Real-Time Clock (RTC) Alarm Register (read/write).
865 * RCNR Real-Time Clock (RTC) CouNt Register (read/write).
866 * RTTR Real-Time Clock (RTC) Trim Register (read/write).
867 * RTSR Real-Time Clock (RTC) Status Register (read/write).
868 *
869 * Clocks
870 * frtx, Trtx Frequency, period of the real-time clock crystal
871 * (32.768 kHz nominal).
872 * frtc, Trtc Frequency, period of the real-time clock counter
873 * (1 Hz nominal).
874 */
875
876 #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */
877 #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */
878 #define RTTR __REG(0x90010008) /* RTC Trim Reg. */
879 #define RTSR __REG(0x90010010) /* RTC Status Reg. */
880
881 #define RTTR_C Fld (16, 0) /* clock divider Count - 1 */
882 #define RTTR_D Fld (10, 16) /* trim Delete count */
883 /* frtc = (1023*(C + 1) - D)*frtx/ */
884 /* (1023*(C + 1)^2) */
885 /* Trtc = (1023*(C + 1)^2)*Trtx/ */
886 /* (1023*(C + 1) - D) */
887
888 #define RTSR_AL 0x00000001 /* ALarm detected */
889 #define RTSR_HZ 0x00000002 /* 1 Hz clock detected */
890 #define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */
891 #define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */
892
893
894 /*
895 * Power Manager (PM) control registers
896 *
897 * Registers
898 * PMCR Power Manager (PM) Control Register (read/write).
899 * PSSR Power Manager (PM) Sleep Status Register (read/write).
900 * PSPR Power Manager (PM) Scratch-Pad Register (read/write).
901 * PWER Power Manager (PM) Wake-up Enable Register
902 * (read/write).
903 * PCFR Power Manager (PM) general ConFiguration Register
904 * (read/write).
905 * PPCR Power Manager (PM) Phase-Locked Loop (PLL)
906 * Configuration Register (read/write).
907 * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO)
908 * Sleep state Register (read/write, see GPIO pins).
909 * POSR Power Manager (PM) Oscillator Status Register (read).
910 *
911 * Clocks
912 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
913 * or 3.5795 MHz).
914 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
915 */
916
917 #define PMCR __REG(0x90020000) /* PM Control Reg. */
918 #define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */
919 #define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */
920 #define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */
921 #define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */
922 #define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */
923 #define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */
924 #define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */
925
926 #define PMCR_SF 0x00000001 /* Sleep Force (set only) */
927
928 #define PSSR_SS 0x00000001 /* Software Sleep */
929 #define PSSR_BFS 0x00000002 /* Battery Fault Status */
930 /* (BATT_FAULT) */
931 #define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */
932 #define PSSR_DH 0x00000008 /* DRAM control Hold */
933 #define PSSR_PH 0x00000010 /* Peripheral control Hold */
934
935 #define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
936 #define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
937 #define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
938 #define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
939 #define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
940 #define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
941 #define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
942 #define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
943 #define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
944 #define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
945 #define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
946 #define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
947 #define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
948 #define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
949 #define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
950 #define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
951 #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
952 #define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */
953 #define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */
954 #define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */
955 #define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */
956 #define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */
957 #define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */
958 #define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */
959 #define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */
960 #define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */
961 #define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */
962 #define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */
963 #define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */
964 #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
965
966 #define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */
967 #define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */
968 #define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */
969 #define PCFR_FP 0x00000002 /* Float PCMCIA pins */
970 #define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */
971 #define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */
972 #define PCFR_FS 0x00000004 /* Float Static memory pins */
973 #define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */
974 #define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */
975 #define PCFR_FO 0x00000008 /* Force RTC oscillator */
976 /* (32.768 kHz) enable On */
977
978 #define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */
979 #define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \
980 (0x00 << FShft (PPCR_CCF))
981 #define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \
982 (0x01 << FShft (PPCR_CCF))
983 #define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \
984 (0x02 << FShft (PPCR_CCF))
985 #define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \
986 (0x03 << FShft (PPCR_CCF))
987 #define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \
988 (0x04 << FShft (PPCR_CCF))
989 #define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \
990 (0x05 << FShft (PPCR_CCF))
991 #define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \
992 (0x06 << FShft (PPCR_CCF))
993 #define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \
994 (0x07 << FShft (PPCR_CCF))
995 #define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \
996 (0x08 << FShft (PPCR_CCF))
997 #define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \
998 (0x09 << FShft (PPCR_CCF))
999 #define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \
1000 (0x0A << FShft (PPCR_CCF))
1001 #define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \
1002 (0x0B << FShft (PPCR_CCF))
1003 #define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \
1004 (0x0C << FShft (PPCR_CCF))
1005 #define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \
1006 (0x0D << FShft (PPCR_CCF))
1007 #define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \
1008 (0x0E << FShft (PPCR_CCF))
1009 #define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \
1010 (0x0F << FShft (PPCR_CCF))
1011 /* 3.6864 MHz crystal (fxtl): */
1012 #define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */
1013 #define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */
1014 #define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */
1015 #define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */
1016 #define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */
1017 #define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */
1018 #define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */
1019 #define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */
1020 #define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */
1021 #define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */
1022 #define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */
1023 #define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */
1024 #define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */
1025 #define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */
1026 #define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */
1027 #define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */
1028 /* 3.5795 MHz crystal (fxtl): */
1029 #define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */
1030 #define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */
1031 #define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */
1032 #define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */
1033 #define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */
1034 #define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */
1035 #define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */
1036 #define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */
1037 #define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */
1038 #define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */
1039 #define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */
1040 #define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */
1041 #define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */
1042 #define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */
1043 #define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */
1044 #define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */
1045
1046 #define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */
1047
1048
1049 /*
1050 * Reset Controller (RC) control registers
1051 *
1052 * Registers
1053 * RSRR Reset Controller (RC) Software Reset Register
1054 * (read/write).
1055 * RCSR Reset Controller (RC) Status Register (read/write).
1056 */
1057
1058 #define RSRR __REG(0x90030000) /* RC Software Reset Reg. */
1059 #define RCSR __REG(0x90030004) /* RC Status Reg. */
1060
1061 #define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */
1062
1063 #define RCSR_HWR 0x00000001 /* HardWare Reset */
1064 #define RCSR_SWR 0x00000002 /* SoftWare Reset */
1065 #define RCSR_WDR 0x00000004 /* Watch-Dog Reset */
1066 #define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */
1067
1068
1069 /*
1070 * Test unit control registers
1071 *
1072 * Registers
1073 * TUCR Test Unit Control Register (read/write).
1074 */
1075
1076 #define TUCR __REG(0x90030008) /* Test Unit Control Reg. */
1077
1078 #define TUCR_TIC 0x00000040 /* TIC mode */
1079 #define TUCR_TTST 0x00000080 /* Trim TeST mode */
1080 #define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */
1081 /* Check */
1082 #define TUCR_PMD 0x00000200 /* Power Management Disable */
1083 #define TUCR_MR 0x00000400 /* Memory Request mode */
1084 #define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */
1085 #define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */
1086 /* grant (MBGNT) on GPIO [22:21] */
1087 #define TUCR_CTB Fld (3, 20) /* Clock Test Bits */
1088 #define TUCR_FDC 0x00800000 /* RTC Force Delete Count */
1089 #define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */
1090 #define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */
1091 #define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */
1092 #define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */
1093 #define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \
1094 (0 << FShft (TUCR_TSEL))
1095 #define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \
1096 (1 << FShft (TUCR_TSEL))
1097 #define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \
1098 (2 << FShft (TUCR_TSEL))
1099 #define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \
1100 (3 << FShft (TUCR_TSEL))
1101 #define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \
1102 /* Clocks on GPIO [26:27] */ \
1103 (4 << FShft (TUCR_TSEL))
1104 #define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \
1105 /* (Alternative) */ \
1106 (5 << FShft (TUCR_TSEL))
1107 #define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \
1108 (6 << FShft (TUCR_TSEL))
1109 #define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \
1110 (7 << FShft (TUCR_TSEL))
1111
1112
1113 /*
1114 * General-Purpose Input/Output (GPIO) control registers
1115 *
1116 * Registers
1117 * GPLR General-Purpose Input/Output (GPIO) Pin Level
1118 * Register (read).
1119 * GPDR General-Purpose Input/Output (GPIO) Pin Direction
1120 * Register (read/write).
1121 * GPSR General-Purpose Input/Output (GPIO) Pin output Set
1122 * Register (write).
1123 * GPCR General-Purpose Input/Output (GPIO) Pin output Clear
1124 * Register (write).
1125 * GRER General-Purpose Input/Output (GPIO) Rising-Edge
1126 * detect Register (read/write).
1127 * GFER General-Purpose Input/Output (GPIO) Falling-Edge
1128 * detect Register (read/write).
1129 * GEDR General-Purpose Input/Output (GPIO) Edge Detect
1130 * status Register (read/write).
1131 * GAFR General-Purpose Input/Output (GPIO) Alternate
1132 * Function Register (read/write).
1133 *
1134 * Clock
1135 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
1136 */
1137
1138 #define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */
1139 #define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */
1140 #define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */
1141 #define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */
1142 #define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */
1143 #define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */
1144 #define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */
1145 #define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */
1146
1147 #define GPIO_MIN (0)
1148 #define GPIO_MAX (27)
1149
1150 #define GPIO_GPIO(Nb) /* GPIO [0..27] */ \
1151 (0x00000001 << (Nb))
1152 #define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
1153 #define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
1154 #define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
1155 #define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
1156 #define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
1157 #define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
1158 #define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
1159 #define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */
1160 #define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */
1161 #define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */
1162 #define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */
1163 #define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */
1164 #define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */
1165 #define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */
1166 #define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */
1167 #define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */
1168 #define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */
1169 #define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */
1170 #define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */
1171 #define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */
1172 #define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */
1173 #define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */
1174 #define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */
1175 #define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */
1176 #define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */
1177 #define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */
1178 #define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */
1179 #define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */
1180
1181 #define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \
1182 GPIO_GPIO ((Nb) - 6)
1183 #define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */
1184 #define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */
1185 #define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */
1186 #define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */
1187 #define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */
1188 #define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */
1189 #define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */
1190 #define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */
1191 /* ser. port 4: */
1192 #define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */
1193 #define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */
1194 #define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */
1195 #define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */
1196 /* ser. port 1: */
1197 #define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */
1198 #define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */
1199 #define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */
1200 #define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */
1201 #define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */
1202 /* ser. port 4: */
1203 #define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */
1204 /* ser. port 3: */
1205 #define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */
1206 /* ser. port 4: */
1207 #define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */
1208 /* test controller: */
1209 #define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */
1210 #define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */
1211 #define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */
1212 #define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */
1213 #define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */
1214 #define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */
1215 #define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */
1216 #define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */
1217
1218 #define GPDR_In 0 /* Input */
1219 #define GPDR_Out 1 /* Output */
1220
1221
1222 /*
1223 * Interrupt Controller (IC) control registers
1224 *
1225 * Registers
1226 * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ)
1227 * Pending register (read).
1228 * ICMR Interrupt Controller (IC) Mask Register (read/write).
1229 * ICLR Interrupt Controller (IC) Level Register (read/write).
1230 * ICCR Interrupt Controller (IC) Control Register
1231 * (read/write).
1232 * [The ICCR register is only implemented in versions 2.0
1233 * (rev. = 8) and higher of the StrongARM SA-1100.]
1234 * ICFP Interrupt Controller (IC) Fast Interrupt reQuest
1235 * (FIQ) Pending register (read).
1236 * ICPR Interrupt Controller (IC) Pending Register (read).
1237 * [The ICPR register is active low (inverted) in
1238 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
1239 * StrongARM SA-1100, it is active high (non-inverted) in
1240 * versions 2.0 (rev. = 8) and higher.]
1241 */
1242
1243 #define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */
1244 #define ICMR __REG(0x90050004) /* IC Mask Reg. */
1245 #define ICLR __REG(0x90050008) /* IC Level Reg. */
1246 #define ICCR __REG(0x9005000C) /* IC Control Reg. */
1247 #define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */
1248 #define ICPR __REG(0x90050020) /* IC Pending Reg. */
1249
1250 #define IC_GPIO(Nb) /* GPIO [0..10] */ \
1251 (0x00000001 << (Nb))
1252 #define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */
1253 #define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */
1254 #define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */
1255 #define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */
1256 #define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */
1257 #define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */
1258 #define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */
1259 #define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */
1260 #define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */
1261 #define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */
1262 #define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */
1263 #define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */
1264 #define IC_LCD 0x00001000 /* LCD controller */
1265 #define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */
1266 #define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */
1267 #define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */
1268 #define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */
1269 #define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */
1270 #define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */
1271 #define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */
1272 #define IC_DMA(Nb) /* DMA controller channel [0..5] */ \
1273 (0x00100000 << (Nb))
1274 #define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */
1275 #define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */
1276 #define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */
1277 #define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */
1278 #define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */
1279 #define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */
1280 #define IC_OST(Nb) /* OS Timer match [0..3] */ \
1281 (0x04000000 << (Nb))
1282 #define IC_OST0 IC_OST (0) /* OS Timer match 0 */
1283 #define IC_OST1 IC_OST (1) /* OS Timer match 1 */
1284 #define IC_OST2 IC_OST (2) /* OS Timer match 2 */
1285 #define IC_OST3 IC_OST (3) /* OS Timer match 3 */
1286 #define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */
1287 #define IC_RTCAlrm 0x80000000 /* RTC Alarm */
1288
1289 #define ICLR_IRQ 0 /* Interrupt ReQuest */
1290 #define ICLR_FIQ 1 /* Fast Interrupt reQuest */
1291
1292 #define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */
1293 /* Mask */
1294 #define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */
1295 /* (ICMR ignored) */
1296 #define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */
1297 /* enable (ICMR used) */
1298
1299
1300 /*
1301 * Peripheral Pin Controller (PPC) control registers
1302 *
1303 * Registers
1304 * PPDR Peripheral Pin Controller (PPC) Pin Direction
1305 * Register (read/write).
1306 * PPSR Peripheral Pin Controller (PPC) Pin State Register
1307 * (read/write).
1308 * PPAR Peripheral Pin Controller (PPC) Pin Assignment
1309 * Register (read/write).
1310 * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin
1311 * Direction Register (read/write).
1312 * PPFR Peripheral Pin Controller (PPC) Pin Flag Register
1313 * (read).
1314 */
1315
1316 #define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */
1317 #define PPSR __REG(0x90060004) /* PPC Pin State Reg. */
1318 #define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */
1319 #define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */
1320 #define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */
1321
1322 #define PPC_LDD(Nb) /* LCD Data [0..7] */ \
1323 (0x00000001 << (Nb))
1324 #define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */
1325 #define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */
1326 #define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */
1327 #define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */
1328 #define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */
1329 #define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */
1330 #define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */
1331 #define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */
1332 #define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */
1333 #define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */
1334 #define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */
1335 #define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */
1336 /* ser. port 1: */
1337 #define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */
1338 #define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */
1339 /* ser. port 2: */
1340 #define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */
1341 #define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */
1342 /* ser. port 3: */
1343 #define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */
1344 #define PPC_RXD3 0x00020000 /* UART Receive Data 3 */
1345 /* ser. port 4: */
1346 #define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */
1347 #define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */
1348 #define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */
1349 #define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */
1350
1351 #define PPDR_In 0 /* Input */
1352 #define PPDR_Out 1 /* Output */
1353
1354 /* ser. port 1: */
1355 #define PPAR_UPR 0x00001000 /* UART Pin Reassignment */
1356 #define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */
1357 #define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */
1358 /* ser. port 4: */
1359 #define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */
1360 #define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */
1361 /* & SFRM_C */
1362 #define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */
1363
1364 #define PSDR_OutL 0 /* Output Low in sleep mode */
1365 #define PSDR_Flt 1 /* Floating (input) in sleep mode */
1366
1367 #define PPFR_LCD 0x00000001 /* LCD controller */
1368 #define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */
1369 #define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */
1370 #define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */
1371 #define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */
1372 #define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */
1373 #define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */
1374 #define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */
1375 #define PPFR_PerEn 0 /* Peripheral Enabled */
1376 #define PPFR_PPCEn 1 /* PPC Enabled */
1377
1378
1379 /*
1380 * Dynamic Random-Access Memory (DRAM) control registers
1381 *
1382 * Registers
1383 * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM)
1384 * CoNFiGuration register (read/write).
1385 * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM)
1386 * Column Address Strobe (CAS) shift register 0
1387 * (read/write).
1388 * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM)
1389 * Column Address Strobe (CAS) shift register 1
1390 * (read/write).
1391 * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM)
1392 * Column Address Strobe (CAS) shift register 2
1393 * (read/write).
1394 *
1395 * Clocks
1396 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
1397 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
1398 * fcas, Tcas Frequency, period of the DRAM CAS shift registers.
1399 */
1400
1401 #define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */
1402 #define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */
1403 #define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */
1404 #define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */
1405
1406 /* SA1100 MDCNFG values */
1407 #define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \
1408 (0x00000001 << (Nb))
1409 #define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */
1410 #define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */
1411 #define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */
1412 #define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */
1413 #define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */
1414 #define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \
1415 (((Add) - 9) << FShft (MDCNFG_DRAC))
1416 #define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */
1417 /* (fcas = fcpu/2) */
1418 #define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */
1419 #define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \
1420 (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
1421 #define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \
1422 (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
1423 #define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */
1424 #define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \
1425 (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
1426 #define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \
1427 (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
1428 #define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */
1429 #define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \
1430 ((Tcpu) << FShft (MDCNFG_TDL))
1431 #define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */
1432 /* [Tmem] */
1433 #define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \
1434 /* [0..262136 Tcpu] */ \
1435 ((Tcpu)/8 << FShft (MDCNFG_DRI))
1436
1437 /* SA1110 MDCNFG values */
1438 #define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */
1439 #define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */
1440 #define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */
1441 #define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */
1442 #define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */
1443 /* bank 0/1 */
1444 #define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */
1445 #define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */
1446 #define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/
1447 /* deassertion 0/1 */
1448 #define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */
1449 #define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */
1450 #define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */
1451 #define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */
1452 #define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */
1453 #define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */
1454 /* bank 0/1 */
1455 #define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */
1456 #define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */
1457 #define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/
1458 /* deassertion 0/1 */
1459 #define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */
1460
1461
1462 /*
1463 * Static memory control registers
1464 *
1465 * Registers
1466 * MSC0 Memory system: Static memory Control register 0
1467 * (read/write).
1468 * MSC1 Memory system: Static memory Control register 1
1469 * (read/write).
1470 *
1471 * Clocks
1472 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
1473 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
1474 */
1475
1476 #define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */
1477 #define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */
1478 #define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */
1479
1480 #define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \
1481 Fld (16, ((Nb) Modulo 2)*16)
1482 #define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */
1483 #define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */
1484 #define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */
1485 #define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */
1486
1487 #define MSC_RT Fld (2, 0) /* ROM/static memory Type */
1488 #define MSC_NonBrst /* Non-Burst static memory */ \
1489 (0 << FShft (MSC_RT))
1490 #define MSC_SRAM /* 32-bit byte-writable SRAM */ \
1491 (1 << FShft (MSC_RT))
1492 #define MSC_Brst4 /* Burst-of-4 static memory */ \
1493 (2 << FShft (MSC_RT))
1494 #define MSC_Brst8 /* Burst-of-8 static memory */ \
1495 (3 << FShft (MSC_RT))
1496 #define MSC_RBW 0x0004 /* ROM/static memory Bus Width */
1497 #define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */
1498 #define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */
1499 #define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */
1500 /* First access - 1(.5) [Tmem] */
1501 #define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \
1502 /* static memory) [3..65 Tcpu] */ \
1503 ((((Tcpu) - 3)/2) << FShft (MSC_RDF))
1504 #define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \
1505 ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
1506 #define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \
1507 /* static memory) [2..64 Tcpu] */ \
1508 ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
1509 #define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \
1510 ((((Tcpu) - 1)/2) << FShft (MSC_RDF))
1511 #define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */
1512 /* Next access - 1 [Tmem] */
1513 #define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \
1514 /* static memory) [2..64 Tcpu] */ \
1515 ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
1516 #define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \
1517 ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
1518 #define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \
1519 /* static memory) [2..64 Tcpu] */ \
1520 ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
1521 #define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \
1522 ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
1523 #define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */
1524 /* time/2 [Tmem] */
1525 #define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \
1526 (((Tcpu)/4) << FShft (MSC_RRR))
1527 #define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \
1528 ((((Tcpu) + 3)/4) << FShft (MSC_RRR))
1529
1530
1531 /*
1532 * Personal Computer Memory Card International Association (PCMCIA) control
1533 * register
1534 *
1535 * Register
1536 * MECR Memory system: Expansion memory bus (PCMCIA)
1537 * Configuration Register (read/write).
1538 *
1539 * Clocks
1540 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
1541 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
1542 * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK).
1543 */
1544
1545 /* Memory system: */
1546 #define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */
1547
1548 #define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \
1549 Fld (15, (Nb)*16)
1550 #define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */
1551 #define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */
1552
1553 #define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */
1554 #define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \
1555 ((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
1556 #define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \
1557 ((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
1558 #define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */
1559 /* [Tmem] */
1560 #define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \
1561 ((((Tcpu) - 2)/2) << FShft (MECR_BSA))
1562 #define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \
1563 ((((Tcpu) - 1)/2) << FShft (MECR_BSA))
1564 #define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */
1565 #define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \
1566 ((((Tcpu) - 2)/2) << FShft (MECR_BSM))
1567 #define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \
1568 ((((Tcpu) - 1)/2) << FShft (MECR_BSM))
1569
1570 /*
1571 * On SA1110 only
1572 */
1573
1574 #define MDREFR __REG(0xA000001C)
1575
1576 #define MDREFR_TRASR Fld (4, 0)
1577 #define MDREFR_DRI Fld (12, 4)
1578 #define MDREFR_E0PIN (1 << 16)
1579 #define MDREFR_K0RUN (1 << 17)
1580 #define MDREFR_K0DB2 (1 << 18)
1581 #define MDREFR_E1PIN (1 << 20)
1582 #define MDREFR_K1RUN (1 << 21)
1583 #define MDREFR_K1DB2 (1 << 22)
1584 #define MDREFR_K2RUN (1 << 25)
1585 #define MDREFR_K2DB2 (1 << 26)
1586 #define MDREFR_EAPD (1 << 28)
1587 #define MDREFR_KAPD (1 << 29)
1588 #define MDREFR_SLFRSH (1 << 31)
1589
1590
1591 /*
1592 * Direct Memory Access (DMA) control registers
1593 *
1594 * Registers
1595 * DDAR0 Direct Memory Access (DMA) Device Address Register
1596 * channel 0 (read/write).
1597 * DCSR0 Direct Memory Access (DMA) Control and Status
1598 * Register channel 0 (read/write).
1599 * DBSA0 Direct Memory Access (DMA) Buffer Start address
1600 * register A channel 0 (read/write).
1601 * DBTA0 Direct Memory Access (DMA) Buffer Transfer count
1602 * register A channel 0 (read/write).
1603 * DBSB0 Direct Memory Access (DMA) Buffer Start address
1604 * register B channel 0 (read/write).
1605 * DBTB0 Direct Memory Access (DMA) Buffer Transfer count
1606 * register B channel 0 (read/write).
1607 *
1608 * DDAR1 Direct Memory Access (DMA) Device Address Register
1609 * channel 1 (read/write).
1610 * DCSR1 Direct Memory Access (DMA) Control and Status
1611 * Register channel 1 (read/write).
1612 * DBSA1 Direct Memory Access (DMA) Buffer Start address
1613 * register A channel 1 (read/write).
1614 * DBTA1 Direct Memory Access (DMA) Buffer Transfer count
1615 * register A channel 1 (read/write).
1616 * DBSB1 Direct Memory Access (DMA) Buffer Start address
1617 * register B channel 1 (read/write).
1618 * DBTB1 Direct Memory Access (DMA) Buffer Transfer count
1619 * register B channel 1 (read/write).
1620 *
1621 * DDAR2 Direct Memory Access (DMA) Device Address Register
1622 * channel 2 (read/write).
1623 * DCSR2 Direct Memory Access (DMA) Control and Status
1624 * Register channel 2 (read/write).
1625 * DBSA2 Direct Memory Access (DMA) Buffer Start address
1626 * register A channel 2 (read/write).
1627 * DBTA2 Direct Memory Access (DMA) Buffer Transfer count
1628 * register A channel 2 (read/write).
1629 * DBSB2 Direct Memory Access (DMA) Buffer Start address
1630 * register B channel 2 (read/write).
1631 * DBTB2 Direct Memory Access (DMA) Buffer Transfer count
1632 * register B channel 2 (read/write).
1633 *
1634 * DDAR3 Direct Memory Access (DMA) Device Address Register
1635 * channel 3 (read/write).
1636 * DCSR3 Direct Memory Access (DMA) Control and Status
1637 * Register channel 3 (read/write).
1638 * DBSA3 Direct Memory Access (DMA) Buffer Start address
1639 * register A channel 3 (read/write).
1640 * DBTA3 Direct Memory Access (DMA) Buffer Transfer count
1641 * register A channel 3 (read/write).
1642 * DBSB3 Direct Memory Access (DMA) Buffer Start address
1643 * register B channel 3 (read/write).
1644 * DBTB3 Direct Memory Access (DMA) Buffer Transfer count
1645 * register B channel 3 (read/write).
1646 *
1647 * DDAR4 Direct Memory Access (DMA) Device Address Register
1648 * channel 4 (read/write).
1649 * DCSR4 Direct Memory Access (DMA) Control and Status
1650 * Register channel 4 (read/write).
1651 * DBSA4 Direct Memory Access (DMA) Buffer Start address
1652 * register A channel 4 (read/write).
1653 * DBTA4 Direct Memory Access (DMA) Buffer Transfer count
1654 * register A channel 4 (read/write).
1655 * DBSB4 Direct Memory Access (DMA) Buffer Start address
1656 * register B channel 4 (read/write).
1657 * DBTB4 Direct Memory Access (DMA) Buffer Transfer count
1658 * register B channel 4 (read/write).
1659 *
1660 * DDAR5 Direct Memory Access (DMA) Device Address Register
1661 * channel 5 (read/write).
1662 * DCSR5 Direct Memory Access (DMA) Control and Status
1663 * Register channel 5 (read/write).
1664 * DBSA5 Direct Memory Access (DMA) Buffer Start address
1665 * register A channel 5 (read/write).
1666 * DBTA5 Direct Memory Access (DMA) Buffer Transfer count
1667 * register A channel 5 (read/write).
1668 * DBSB5 Direct Memory Access (DMA) Buffer Start address
1669 * register B channel 5 (read/write).
1670 * DBTB5 Direct Memory Access (DMA) Buffer Transfer count
1671 * register B channel 5 (read/write).
1672 */
1673
1674 #define DMASp 0x00000020 /* DMA control reg. Space [byte] */
1675
1676 #define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */
1677 #define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */
1678 #define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */
1679 #define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */
1680 #define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */
1681 #define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */
1682 #define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */
1683 #define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */
1684
1685 #define DDAR_RW 0x00000001 /* device data Read/Write */
1686 #define DDAR_DevWr (DDAR_RW*0) /* Device data Write */
1687 /* (memory -> device) */
1688 #define DDAR_DevRd (DDAR_RW*1) /* Device data Read */
1689 /* (device -> memory) */
1690 #define DDAR_E 0x00000002 /* big/little Endian device */
1691 #define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */
1692 #define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */
1693 #define DDAR_BS 0x00000004 /* device Burst Size */
1694 #define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */
1695 #define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */
1696 #define DDAR_DW 0x00000008 /* device Data Width */
1697 #define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */
1698 #define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */
1699 #define DDAR_DS Fld (4, 4) /* Device Select */
1700 #define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \
1701 (0x0 << FShft (DDAR_DS))
1702 #define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \
1703 (0x1 << FShft (DDAR_DS))
1704 #define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \
1705 (0x2 << FShft (DDAR_DS))
1706 #define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \
1707 (0x3 << FShft (DDAR_DS))
1708 #define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \
1709 (0x4 << FShft (DDAR_DS))
1710 #define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \
1711 (0x5 << FShft (DDAR_DS))
1712 #define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \
1713 (0x6 << FShft (DDAR_DS))
1714 #define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \
1715 (0x7 << FShft (DDAR_DS))
1716 #define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \
1717 (0x8 << FShft (DDAR_DS))
1718 #define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \
1719 (0x9 << FShft (DDAR_DS))
1720 #define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \
1721 /* (audio) */ \
1722 (0xA << FShft (DDAR_DS))
1723 #define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \
1724 /* (audio) */ \
1725 (0xB << FShft (DDAR_DS))
1726 #define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \
1727 /* (telecom) */ \
1728 (0xC << FShft (DDAR_DS))
1729 #define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \
1730 /* (telecom) */ \
1731 (0xD << FShft (DDAR_DS))
1732 #define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \
1733 (0xE << FShft (DDAR_DS))
1734 #define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \
1735 (0xF << FShft (DDAR_DS))
1736 #define DDAR_DA Fld (24, 8) /* Device Address */
1737 #define DDAR_DevAdd(Add) /* Device Address */ \
1738 (((Add) & 0xF0000000) | \
1739 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
1740 #define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \
1741 (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
1742 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
1743 #define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \
1744 (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
1745 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
1746 #define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \
1747 (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
1748 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
1749 #define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \
1750 (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
1751 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
1752 #define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \
1753 (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
1754 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
1755 #define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \
1756 (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
1757 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
1758 #define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \
1759 (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
1760 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
1761 #define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \
1762 (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
1763 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
1764 #define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \
1765 (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
1766 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
1767 #define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \
1768 (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
1769 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
1770 #define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \
1771 (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
1772 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
1773 #define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \
1774 (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
1775 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
1776 #define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \
1777 (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
1778 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
1779 #define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \
1780 (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
1781 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
1782 #define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \
1783 /* (telecom) */ \
1784 (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
1785 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
1786 #define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \
1787 /* (telecom) */ \
1788 (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
1789 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
1790 #define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \
1791 (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
1792 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
1793 #define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \
1794 (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
1795 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
1796
1797 #define DCSR_RUN 0x00000001 /* DMA RUNing */
1798 #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */
1799 #define DCSR_ERROR 0x00000004 /* DMA ERROR */
1800 #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */
1801 #define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */
1802 #define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */
1803 #define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */
1804 #define DCSR_BIU 0x00000080 /* DMA Buffer In Use */
1805 #define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */
1806 #define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */
1807
1808 #define DBT_TC Fld (13, 0) /* Transfer Count */
1809 #define DBTA_TCA DBT_TC /* Transfer Count buffer A */
1810 #define DBTB_TCB DBT_TC /* Transfer Count buffer B */
1811
1812
1813 /*
1814 * Liquid Crystal Display (LCD) control registers
1815 *
1816 * Registers
1817 * LCCR0 Liquid Crystal Display (LCD) Control Register 0
1818 * (read/write).
1819 * [Bits LDM, BAM, and ERM are only implemented in
1820 * versions 2.0 (rev. = 8) and higher of the StrongARM
1821 * SA-1100.]
1822 * LCSR Liquid Crystal Display (LCD) Status Register
1823 * (read/write).
1824 * [Bit LDD can be only read in versions 1.0 (rev. = 1)
1825 * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
1826 * read and written (cleared) in versions 2.0 (rev. = 8)
1827 * and higher.]
1828 * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access
1829 * (DMA) Base Address Register channel 1 (read/write).
1830 * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access
1831 * (DMA) Current Address Register channel 1 (read).
1832 * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access
1833 * (DMA) Base Address Register channel 2 (read/write).
1834 * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access
1835 * (DMA) Current Address Register channel 2 (read).
1836 * LCCR1 Liquid Crystal Display (LCD) Control Register 1
1837 * (read/write).
1838 * [The LCCR1 register can be only written in
1839 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
1840 * StrongARM SA-1100, it can be written and read in
1841 * versions 2.0 (rev. = 8) and higher.]
1842 * LCCR2 Liquid Crystal Display (LCD) Control Register 2
1843 * (read/write).
1844 * [The LCCR1 register can be only written in
1845 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
1846 * StrongARM SA-1100, it can be written and read in
1847 * versions 2.0 (rev. = 8) and higher.]
1848 * LCCR3 Liquid Crystal Display (LCD) Control Register 3
1849 * (read/write).
1850 * [The LCCR1 register can be only written in
1851 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
1852 * StrongARM SA-1100, it can be written and read in
1853 * versions 2.0 (rev. = 8) and higher. Bit PCP is only
1854 * implemented in versions 2.0 (rev. = 8) and higher of
1855 * the StrongARM SA-1100.]
1856 *
1857 * Clocks
1858 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
1859 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
1860 * fpix, Tpix Frequency, period of the pixel clock.
1861 * fln, Tln Frequency, period of the line clock.
1862 * fac, Tac Frequency, period of the AC bias clock.
1863 */
1864
1865 #define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */
1866 #define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \
1867 /* [byte] */ \
1868 (16*LCD_PEntrySp)
1869 #define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \
1870 /* [byte] */ \
1871 (256*LCD_PEntrySp)
1872 #define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \
1873 /* dummy-Palette Space [byte] */ \
1874 (16*LCD_PEntrySp)
1875
1876 #define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */
1877 #define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */
1878 #define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */
1879 #define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */
1880 #define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */
1881 #define LCD_4Bit /* LCD 4-Bit pixel mode */ \
1882 (0 << FShft (LCD_PBS))
1883 #define LCD_8Bit /* LCD 8-Bit pixel mode */ \
1884 (1 << FShft (LCD_PBS))
1885 #define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \
1886 (2 << FShft (LCD_PBS))
1887
1888 #define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */
1889 #define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */
1890 #define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */
1891 #define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */
1892 #define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */
1893 #define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */
1894 #define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */
1895 #define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */
1896 #define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */
1897 #define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */
1898 #define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */
1899 #define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */
1900 #define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */
1901 #define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */
1902 #define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */
1903 #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
1904 /* (Alternative) */
1905
1906 #define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */
1907 #define LCSR __REG(0xB0100004) /* LCD Status Reg. */
1908 #define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */
1909 #define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */
1910 #define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */
1911 #define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */
1912 #define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */
1913 #define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */
1914 #define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */
1915
1916 #define LCCR0_LEN 0x00000001 /* LCD ENable */
1917 #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */
1918 #define LCCR0_Color (LCCR0_CMS*0) /* Color display */
1919 #define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
1920 #define LCCR0_SDS 0x00000004 /* Single/Dual panel display */
1921 /* Select */
1922 #define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
1923 #define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
1924 #define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */
1925 /* interrupt Mask (disable) */
1926 #define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */
1927 /* interrupt Mask (disable) */
1928 #define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */
1929 /* IUU, OOL, OUL, OOU, and OUU) */
1930 /* interrupt Mask (disable) */
1931 #define LCCR0_PAS 0x00000080 /* Passive/Active display Select */
1932 #define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
1933 #define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
1934 #define LCCR0_BLE 0x00000100 /* Big/Little Endian select */
1935 #define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */
1936 #define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */
1937 #define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */
1938 /* display mode) */
1939 #define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
1940 /* display */
1941 #define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
1942 /* display */
1943 #define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */
1944 /* [Tmem] */
1945 #define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \
1946 /* [0..510 Tcpu] */ \
1947 ((Tcpu)/2 << FShft (LCCR0_PDD))
1948
1949 #define LCSR_LDD 0x00000001 /* LCD Disable Done */
1950 #define LCSR_BAU 0x00000002 /* Base Address Update (read) */
1951 #define LCSR_BER 0x00000004 /* Bus ERror */
1952 #define LCSR_ABC 0x00000008 /* AC Bias clock Count */
1953 #define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */
1954 /* panel */
1955 #define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */
1956 /* panel */
1957 #define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */
1958 /* panel */
1959 #define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */
1960 /* panel */
1961 #define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */
1962 /* panel */
1963 #define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */
1964 /* panel */
1965 #define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */
1966 /* panel */
1967 #define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */
1968 /* panel */
1969
1970 #define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */
1971 #define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \
1972 (((Pixel) - 16)/16 << FShft (LCCR1_PPL))
1973 #define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
1974 /* pulse Width - 1 [Tpix] (L_LCLK) */
1975 #define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
1976 /* pulse Width [1..64 Tpix] */ \
1977 (((Tpix) - 1) << FShft (LCCR1_HSW))
1978 #define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
1979 /* count - 1 [Tpix] */
1980 #define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
1981 /* [1..256 Tpix] */ \
1982 (((Tpix) - 1) << FShft (LCCR1_ELW))
1983 #define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
1984 /* Wait count - 1 [Tpix] */
1985 #define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
1986 /* [1..256 Tpix] */ \
1987 (((Tpix) - 1) << FShft (LCCR1_BLW))
1988
1989 #define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
1990 #define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
1991 (((Line) - 1) << FShft (LCCR2_LPP))
1992 #define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
1993 /* Width - 1 [Tln] (L_FCLK) */
1994 #define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
1995 /* Width [1..64 Tln] */ \
1996 (((Tln) - 1) << FShft (LCCR2_VSW))
1997 #define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
1998 /* count [Tln] */
1999 #define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
2000 /* [0..255 Tln] */ \
2001 ((Tln) << FShft (LCCR2_EFW))
2002 #define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
2003 /* Wait count [Tln] */
2004 #define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
2005 /* [0..255 Tln] */ \
2006 ((Tln) << FShft (LCCR2_BFW))
2007
2008 #define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */
2009 /* [1..255] (L_PCLK) */
2010 /* fpix = fcpu/(2*(PCD + 2)) */
2011 /* Tpix = 2*(PCD + 2)*Tcpu */
2012 #define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \
2013 (((Div) - 4)/2 << FShft (LCCR3_PCD))
2014 /* fpix = fcpu/(2*Floor (Div/2)) */
2015 /* Tpix = 2*Floor (Div/2)*Tcpu */
2016 #define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \
2017 (((Div) - 3)/2 << FShft (LCCR3_PCD))
2018 /* fpix = fcpu/(2*Ceil (Div/2)) */
2019 /* Tpix = 2*Ceil (Div/2)*Tcpu */
2020 #define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */
2021 /* [Tln] (L_BIAS) */
2022 #define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \
2023 (((Div) - 2)/2 << FShft (LCCR3_ACB))
2024 /* fac = fln/(2*Floor (Div/2)) */
2025 /* Tac = 2*Floor (Div/2)*Tln */
2026 #define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \
2027 (((Div) - 1)/2 << FShft (LCCR3_ACB))
2028 /* fac = fln/(2*Ceil (Div/2)) */
2029 /* Tac = 2*Ceil (Div/2)*Tln */
2030 #define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */
2031 /* Interrupt */
2032 #define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \
2033 /* Off */ \
2034 (0 << FShft (LCCR3_API))
2035 #define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \
2036 /* [1..15] */ \
2037 ((Trans) << FShft (LCCR3_API))
2038 #define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */
2039 /* Polarity (L_FCLK) */
2040 #define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
2041 /* active High */
2042 #define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
2043 /* active Low */
2044 #define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */
2045 /* pulse Polarity (L_LCLK) */
2046 #define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
2047 /* pulse active High */
2048 #define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
2049 /* pulse active Low */
2050 #define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */
2051 #define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
2052 #define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
2053 #define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */
2054 /* active display mode) */
2055 #define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
2056 #define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
2057
2058 #ifndef __ASSEMBLY__
2059 extern unsigned int processor_id;
2060 #endif
2061
2062 #define CPU_REVISION (processor_id & 15)
2063 #define CPU_SA1110_A0 (0)
2064 #define CPU_SA1110_B0 (4)
2065 #define CPU_SA1110_B1 (5)
2066 #define CPU_SA1110_B2 (6)
2067 #define CPU_SA1110_B4 (8)
2068
2069 #define CPU_SA1100_ID (0x4401a110)
2070 #define CPU_SA1100_MASK (0xfffffff0)
2071 #define CPU_SA1110_ID (0x6901b110)
2072 #define CPU_SA1110_MASK (0xfffffff0)
Linux with added FPC-III support