?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
USB: quirks for known quirky audio devices
[linux/fpc-iii.git] / drivers / video / sm501fb.c
blobe83dfba7e6361af564390dcd553dcdd6a1790ee5
1 /* linux/drivers/video/sm501fb.c
2 *
3 * Copyright (c) 2006 Simtec Electronics
4 * Vincent Sanders <vince@simtec.co.uk>
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Framebuffer driver for the Silicon Motion SM501
12 */
13
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/string.h>
18 #include <linux/mm.h>
19 #include <linux/tty.h>
20 #include <linux/slab.h>
21 #include <linux/delay.h>
22 #include <linux/fb.h>
23 #include <linux/init.h>
24 #include <linux/vmalloc.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/interrupt.h>
27 #include <linux/workqueue.h>
28 #include <linux/wait.h>
29 #include <linux/platform_device.h>
30 #include <linux/clk.h>
31 #include <linux/console.h>
32
33 #include <asm/io.h>
34 #include <asm/uaccess.h>
35 #include <asm/div64.h>
36
37 #ifdef CONFIG_PM
38 #include <linux/pm.h>
39 #endif
40
41 #include <linux/sm501.h>
42 #include <linux/sm501-regs.h>
43
44 #define NR_PALETTE 256
45
46 enum sm501_controller {
47 HEAD_CRT = 0,
48 HEAD_PANEL = 1,
49 };
50
51 /* SM501 memory address */
52 struct sm501_mem {
53 unsigned long size;
54 unsigned long sm_addr;
55 void __iomem *k_addr;
56 };
57
58 /* private data that is shared between all frambuffers* */
59 struct sm501fb_info {
60 struct device *dev;
61 struct fb_info *fb[2]; /* fb info for both heads */
62 struct resource *fbmem_res; /* framebuffer resource */
63 struct resource *regs_res; /* registers resource */
64 struct sm501_platdata_fb *pdata; /* our platform data */
65
66 unsigned long pm_crt_ctrl; /* pm: crt ctrl save */
67
68 int irq;
69 int swap_endian; /* set to swap rgb=>bgr */
70 void __iomem *regs; /* remapped registers */
71 void __iomem *fbmem; /* remapped framebuffer */
72 size_t fbmem_len; /* length of remapped region */
73 };
74
75 /* per-framebuffer private data */
76 struct sm501fb_par {
77 u32 pseudo_palette[16];
78
79 enum sm501_controller head;
80 struct sm501_mem cursor;
81 struct sm501_mem screen;
82 struct fb_ops ops;
83
84 void *store_fb;
85 void *store_cursor;
86 void __iomem *cursor_regs;
87 struct sm501fb_info *info;
88 };
89
90 /* Helper functions */
91
92 static inline int h_total(struct fb_var_screeninfo *var)
93 {
94 return var->xres + var->left_margin +
95 var->right_margin + var->hsync_len;
96 }
97
98 static inline int v_total(struct fb_var_screeninfo *var)
99 {
100 return var->yres + var->upper_margin +
101 var->lower_margin + var->vsync_len;
102 }
103
104 /* sm501fb_sync_regs()
105 *
106 * This call is mainly for PCI bus systems where we need to
107 * ensure that any writes to the bus are completed before the
108 * next phase, or after completing a function.
109 */
110
111 static inline void sm501fb_sync_regs(struct sm501fb_info *info)
112 {
113 readl(info->regs);
114 }
115
116 /* sm501_alloc_mem
117 *
118 * This is an attempt to lay out memory for the two framebuffers and
119 * everything else
120 *
121 * |fbmem_res->start fbmem_res->end|
122 * | |
123 * |fb[0].fix.smem_start | |fb[1].fix.smem_start | 2K |
124 * |-> fb[0].fix.smem_len <-| spare |-> fb[1].fix.smem_len <-|-> cursors <-|
125 *
126 * The "spare" space is for the 2d engine data
127 * the fixed is space for the cursors (2x1Kbyte)
128 *
129 * we need to allocate memory for the 2D acceleration engine
130 * command list and the data for the engine to deal with.
131 *
132 * - all allocations must be 128bit aligned
133 * - cursors are 64x64x2 bits (1Kbyte)
134 *
135 */
136
137 #define SM501_MEMF_CURSOR (1)
138 #define SM501_MEMF_PANEL (2)
139 #define SM501_MEMF_CRT (4)
140 #define SM501_MEMF_ACCEL (8)
141
142 static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
143 unsigned int why, size_t size)
144 {
145 unsigned int ptr = 0;
146
147 switch (why) {
148 case SM501_MEMF_CURSOR:
149 ptr = inf->fbmem_len - size;
150 inf->fbmem_len = ptr;
151 break;
152
153 case SM501_MEMF_PANEL:
154 ptr = inf->fbmem_len - size;
155 if (ptr < inf->fb[0]->fix.smem_len)
156 return -ENOMEM;
157
158 break;
159
160 case SM501_MEMF_CRT:
161 ptr = 0;
162 break;
163
164 case SM501_MEMF_ACCEL:
165 ptr = inf->fb[0]->fix.smem_len;
166
167 if ((ptr + size) >
168 (inf->fb[1]->fix.smem_start - inf->fbmem_res->start))
169 return -ENOMEM;
170 break;
171
172 default:
173 return -EINVAL;
174 }
175
176 mem->size = size;
177 mem->sm_addr = ptr;
178 mem->k_addr = inf->fbmem + ptr;
179
180 dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n",
181 __func__, mem->sm_addr, mem->k_addr, why, size);
182
183 return 0;
184 }
185
186 /* sm501fb_ps_to_hz
187 *
188 * Converts a period in picoseconds to Hz.
189 *
190 * Note, we try to keep this in Hz to minimise rounding with
191 * the limited PLL settings on the SM501.
192 */
193
194 static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
195 {
196 unsigned long long numerator=1000000000000ULL;
197
198 /* 10^12 / picosecond period gives frequency in Hz */
199 do_div(numerator, psvalue);
200 return (unsigned long)numerator;
201 }
202
203 /* sm501fb_hz_to_ps is identical to the oposite transform */
204
205 #define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
206
207 /* sm501fb_setup_gamma
208 *
209 * Programs a linear 1.0 gamma ramp in case the gamma
210 * correction is enabled without programming anything else.
211 */
212
213 static void sm501fb_setup_gamma(struct sm501fb_info *fbi,
214 unsigned long palette)
215 {
216 unsigned long value = 0;
217 int offset;
218
219 /* set gamma values */
220 for (offset = 0; offset < 256 * 4; offset += 4) {
221 writel(value, fbi->regs + palette + offset);
222 value += 0x010101; /* Advance RGB by 1,1,1.*/
223 }
224 }
225
226 /* sm501fb_check_var
227 *
228 * check common variables for both panel and crt
229 */
230
231 static int sm501fb_check_var(struct fb_var_screeninfo *var,
232 struct fb_info *info)
233 {
234 struct sm501fb_par *par = info->par;
235 struct sm501fb_info *sm = par->info;
236 unsigned long tmp;
237
238 /* check we can fit these values into the registers */
239
240 if (var->hsync_len > 255 || var->vsync_len > 255)
241 return -EINVAL;
242
243 if ((var->xres + var->right_margin) >= 4096)
244 return -EINVAL;
245
246 if ((var->yres + var->lower_margin) > 2048)
247 return -EINVAL;
248
249 /* hard limits of device */
250
251 if (h_total(var) > 4096 || v_total(var) > 2048)
252 return -EINVAL;
253
254 /* check our line length is going to be 128 bit aligned */
255
256 tmp = (var->xres * var->bits_per_pixel) / 8;
257 if ((tmp & 15) != 0)
258 return -EINVAL;
259
260 /* check the virtual size */
261
262 if (var->xres_virtual > 4096 || var->yres_virtual > 2048)
263 return -EINVAL;
264
265 /* can cope with 8,16 or 32bpp */
266
267 if (var->bits_per_pixel <= 8)
268 var->bits_per_pixel = 8;
269 else if (var->bits_per_pixel <= 16)
270 var->bits_per_pixel = 16;
271 else if (var->bits_per_pixel == 24)
272 var->bits_per_pixel = 32;
273
274 /* set r/g/b positions and validate bpp */
275 switch(var->bits_per_pixel) {
276 case 8:
277 var->red.length = var->bits_per_pixel;
278 var->red.offset = 0;
279 var->green.length = var->bits_per_pixel;
280 var->green.offset = 0;
281 var->blue.length = var->bits_per_pixel;
282 var->blue.offset = 0;
283 var->transp.length = 0;
284
285 break;
286
287 case 16:
288 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
289 var->red.offset = 11;
290 var->green.offset = 5;
291 var->blue.offset = 0;
292 } else {
293 var->blue.offset = 11;
294 var->green.offset = 5;
295 var->red.offset = 0;
296 }
297
298 var->red.length = 5;
299 var->green.length = 6;
300 var->blue.length = 5;
301 var->transp.length = 0;
302 break;
303
304 case 32:
305 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
306 var->transp.offset = 0;
307 var->red.offset = 8;
308 var->green.offset = 16;
309 var->blue.offset = 24;
310 } else {
311 var->transp.offset = 24;
312 var->red.offset = 16;
313 var->green.offset = 8;
314 var->blue.offset = 0;
315 }
316
317 var->red.length = 8;
318 var->green.length = 8;
319 var->blue.length = 8;
320 var->transp.length = 0;
321 break;
322
323 default:
324 return -EINVAL;
325 }
326
327 return 0;
328 }
329
330 /*
331 * sm501fb_check_var_crt():
332 *
333 * check the parameters for the CRT head, and either bring them
334 * back into range, or return -EINVAL.
335 */
336
337 static int sm501fb_check_var_crt(struct fb_var_screeninfo *var,
338 struct fb_info *info)
339 {
340 return sm501fb_check_var(var, info);
341 }
342
343 /* sm501fb_check_var_pnl():
344 *
345 * check the parameters for the CRT head, and either bring them
346 * back into range, or return -EINVAL.
347 */
348
349 static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var,
350 struct fb_info *info)
351 {
352 return sm501fb_check_var(var, info);
353 }
354
355 /* sm501fb_set_par_common
356 *
357 * set common registers for framebuffers
358 */
359
360 static int sm501fb_set_par_common(struct fb_info *info,
361 struct fb_var_screeninfo *var)
362 {
363 struct sm501fb_par *par = info->par;
364 struct sm501fb_info *fbi = par->info;
365 unsigned long pixclock; /* pixelclock in Hz */
366 unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
367 unsigned int mem_type;
368 unsigned int clock_type;
369 unsigned int head_addr;
370
371 dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
372 __func__, var->xres, var->yres, var->bits_per_pixel,
373 var->xres_virtual, var->yres_virtual);
374
375 switch (par->head) {
376 case HEAD_CRT:
377 mem_type = SM501_MEMF_CRT;
378 clock_type = SM501_CLOCK_V2XCLK;
379 head_addr = SM501_DC_CRT_FB_ADDR;
380 break;
381
382 case HEAD_PANEL:
383 mem_type = SM501_MEMF_PANEL;
384 clock_type = SM501_CLOCK_P2XCLK;
385 head_addr = SM501_DC_PANEL_FB_ADDR;
386 break;
387
388 default:
389 mem_type = 0; /* stop compiler warnings */
390 head_addr = 0;
391 clock_type = 0;
392 }
393
394 switch (var->bits_per_pixel) {
395 case 8:
396 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
397 break;
398
399 case 16:
400 info->fix.visual = FB_VISUAL_DIRECTCOLOR;
401 break;
402
403 case 32:
404 info->fix.visual = FB_VISUAL_TRUECOLOR;
405 break;
406 }
407
408 /* allocate fb memory within 501 */
409 info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
410 info->fix.smem_len = info->fix.line_length * var->yres_virtual;
411
412 dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
413 info->fix.line_length);
414
415 if (sm501_alloc_mem(fbi, &par->screen, mem_type,
416 info->fix.smem_len)) {
417 dev_err(fbi->dev, "no memory available\n");
418 return -ENOMEM;
419 }
420
421 info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
422
423 info->screen_base = fbi->fbmem + par->screen.sm_addr;
424 info->screen_size = info->fix.smem_len;
425
426 /* set start of framebuffer to the screen */
427
428 writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr);
429
430 /* program CRT clock */
431
432 pixclock = sm501fb_ps_to_hz(var->pixclock);
433
434 sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type,
435 pixclock);
436
437 /* update fb layer with actual clock used */
438 var->pixclock = sm501fb_hz_to_ps(sm501pixclock);
439
440 dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz) = %lu, "
441 "sm501pixclock = %lu, error = %ld%%\n",
442 __func__, var->pixclock, pixclock, sm501pixclock,
443 ((pixclock - sm501pixclock)*100)/pixclock);
444
445 return 0;
446 }
447
448 /* sm501fb_set_par_geometry
449 *
450 * set the geometry registers for specified framebuffer.
451 */
452
453 static void sm501fb_set_par_geometry(struct fb_info *info,
454 struct fb_var_screeninfo *var)
455 {
456 struct sm501fb_par *par = info->par;
457 struct sm501fb_info *fbi = par->info;
458 void __iomem *base = fbi->regs;
459 unsigned long reg;
460
461 if (par->head == HEAD_CRT)
462 base += SM501_DC_CRT_H_TOT;
463 else
464 base += SM501_DC_PANEL_H_TOT;
465
466 /* set framebuffer width and display width */
467
468 reg = info->fix.line_length;
469 reg |= ((var->xres * var->bits_per_pixel)/8) << 16;
470
471 writel(reg, fbi->regs + (par->head == HEAD_CRT ?
472 SM501_DC_CRT_FB_OFFSET : SM501_DC_PANEL_FB_OFFSET));
473
474 /* program horizontal total */
475
476 reg = (h_total(var) - 1) << 16;
477 reg |= (var->xres - 1);
478
479 writel(reg, base + SM501_OFF_DC_H_TOT);
480
481 /* program horizontal sync */
482
483 reg = var->hsync_len << 16;
484 reg |= var->xres + var->right_margin - 1;
485
486 writel(reg, base + SM501_OFF_DC_H_SYNC);
487
488 /* program vertical total */
489
490 reg = (v_total(var) - 1) << 16;
491 reg |= (var->yres - 1);
492
493 writel(reg, base + SM501_OFF_DC_V_TOT);
494
495 /* program vertical sync */
496 reg = var->vsync_len << 16;
497 reg |= var->yres + var->lower_margin - 1;
498
499 writel(reg, base + SM501_OFF_DC_V_SYNC);
500 }
501
502 /* sm501fb_pan_crt
503 *
504 * pan the CRT display output within an virtual framebuffer
505 */
506
507 static int sm501fb_pan_crt(struct fb_var_screeninfo *var,
508 struct fb_info *info)
509 {
510 struct sm501fb_par *par = info->par;
511 struct sm501fb_info *fbi = par->info;
512 unsigned int bytes_pixel = var->bits_per_pixel / 8;
513 unsigned long reg;
514 unsigned long xoffs;
515
516 xoffs = var->xoffset * bytes_pixel;
517
518 reg = readl(fbi->regs + SM501_DC_CRT_CONTROL);
519
520 reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK;
521 reg |= ((xoffs & 15) / bytes_pixel) << 4;
522 writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
523
524 reg = (par->screen.sm_addr + xoffs +
525 var->yoffset * info->fix.line_length);
526 writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
527
528 sm501fb_sync_regs(fbi);
529 return 0;
530 }
531
532 /* sm501fb_pan_pnl
533 *
534 * pan the panel display output within an virtual framebuffer
535 */
536
537 static int sm501fb_pan_pnl(struct fb_var_screeninfo *var,
538 struct fb_info *info)
539 {
540 struct sm501fb_par *par = info->par;
541 struct sm501fb_info *fbi = par->info;
542 unsigned long reg;
543
544 reg = var->xoffset | (var->xres_virtual << 16);
545 writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
546
547 reg = var->yoffset | (var->yres_virtual << 16);
548 writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
549
550 sm501fb_sync_regs(fbi);
551 return 0;
552 }
553
554 /* sm501fb_set_par_crt
555 *
556 * Set the CRT video mode from the fb_info structure
557 */
558
559 static int sm501fb_set_par_crt(struct fb_info *info)
560 {
561 struct sm501fb_par *par = info->par;
562 struct sm501fb_info *fbi = par->info;
563 struct fb_var_screeninfo *var = &info->var;
564 unsigned long control; /* control register */
565 int ret;
566
567 /* activate new configuration */
568
569 dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
570
571 /* enable CRT DAC - note 0 is on!*/
572 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
573
574 control = readl(fbi->regs + SM501_DC_CRT_CONTROL);
575
576 control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK |
577 SM501_DC_CRT_CONTROL_GAMMA |
578 SM501_DC_CRT_CONTROL_BLANK |
579 SM501_DC_CRT_CONTROL_SEL |
580 SM501_DC_CRT_CONTROL_CP |
581 SM501_DC_CRT_CONTROL_TVP);
582
583 /* set the sync polarities before we check data source */
584
585 if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
586 control |= SM501_DC_CRT_CONTROL_HSP;
587
588 if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
589 control |= SM501_DC_CRT_CONTROL_VSP;
590
591 if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
592 /* the head is displaying panel data... */
593
594 sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
595 goto out_update;
596 }
597
598 ret = sm501fb_set_par_common(info, var);
599 if (ret) {
600 dev_err(fbi->dev, "failed to set common parameters\n");
601 return ret;
602 }
603
604 sm501fb_pan_crt(var, info);
605 sm501fb_set_par_geometry(info, var);
606
607 control |= SM501_FIFO_3; /* fill if >3 free slots */
608
609 switch(var->bits_per_pixel) {
610 case 8:
611 control |= SM501_DC_CRT_CONTROL_8BPP;
612 break;
613
614 case 16:
615 control |= SM501_DC_CRT_CONTROL_16BPP;
616 break;
617
618 case 32:
619 control |= SM501_DC_CRT_CONTROL_32BPP;
620 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
621 break;
622
623 default:
624 BUG();
625 }
626
627 control |= SM501_DC_CRT_CONTROL_SEL; /* CRT displays CRT data */
628 control |= SM501_DC_CRT_CONTROL_TE; /* enable CRT timing */
629 control |= SM501_DC_CRT_CONTROL_ENABLE; /* enable CRT plane */
630
631 out_update:
632 dev_dbg(fbi->dev, "new control is %08lx\n", control);
633
634 writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
635 sm501fb_sync_regs(fbi);
636
637 return 0;
638 }
639
640 static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
641 {
642 unsigned long control;
643 void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
644 struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
645
646 control = readl(ctrl_reg);
647
648 if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) {
649 /* enable panel power */
650
651 control |= SM501_DC_PANEL_CONTROL_VDD; /* FPVDDEN */
652 writel(control, ctrl_reg);
653 sm501fb_sync_regs(fbi);
654 mdelay(10);
655
656 control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */
657 writel(control, ctrl_reg);
658 sm501fb_sync_regs(fbi);
659 mdelay(10);
660
661 if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
662 control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */
663 writel(control, ctrl_reg);
664 sm501fb_sync_regs(fbi);
665 mdelay(10);
666 }
667
668 if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
669 control |= SM501_DC_PANEL_CONTROL_FPEN;
670 writel(control, ctrl_reg);
671 sm501fb_sync_regs(fbi);
672 mdelay(10);
673 }
674 } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
675 /* disable panel power */
676 if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
677 control &= ~SM501_DC_PANEL_CONTROL_FPEN;
678 writel(control, ctrl_reg);
679 sm501fb_sync_regs(fbi);
680 mdelay(10);
681 }
682
683 if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
684 control &= ~SM501_DC_PANEL_CONTROL_BIAS;
685 writel(control, ctrl_reg);
686 sm501fb_sync_regs(fbi);
687 mdelay(10);
688 }
689
690 control &= ~SM501_DC_PANEL_CONTROL_DATA;
691 writel(control, ctrl_reg);
692 sm501fb_sync_regs(fbi);
693 mdelay(10);
694
695 control &= ~SM501_DC_PANEL_CONTROL_VDD;
696 writel(control, ctrl_reg);
697 sm501fb_sync_regs(fbi);
698 mdelay(10);
699 }
700
701 sm501fb_sync_regs(fbi);
702 }
703
704 /* sm501fb_set_par_pnl
705 *
706 * Set the panel video mode from the fb_info structure
707 */
708
709 static int sm501fb_set_par_pnl(struct fb_info *info)
710 {
711 struct sm501fb_par *par = info->par;
712 struct sm501fb_info *fbi = par->info;
713 struct fb_var_screeninfo *var = &info->var;
714 unsigned long control;
715 unsigned long reg;
716 int ret;
717
718 dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
719
720 /* activate this new configuration */
721
722 ret = sm501fb_set_par_common(info, var);
723 if (ret)
724 return ret;
725
726 sm501fb_pan_pnl(var, info);
727 sm501fb_set_par_geometry(info, var);
728
729 /* update control register */
730
731 control = readl(fbi->regs + SM501_DC_PANEL_CONTROL);
732 control &= (SM501_DC_PANEL_CONTROL_GAMMA |
733 SM501_DC_PANEL_CONTROL_VDD |
734 SM501_DC_PANEL_CONTROL_DATA |
735 SM501_DC_PANEL_CONTROL_BIAS |
736 SM501_DC_PANEL_CONTROL_FPEN |
737 SM501_DC_PANEL_CONTROL_CP |
738 SM501_DC_PANEL_CONTROL_CK |
739 SM501_DC_PANEL_CONTROL_HP |
740 SM501_DC_PANEL_CONTROL_VP |
741 SM501_DC_PANEL_CONTROL_HPD |
742 SM501_DC_PANEL_CONTROL_VPD);
743
744 control |= SM501_FIFO_3; /* fill if >3 free slots */
745
746 switch(var->bits_per_pixel) {
747 case 8:
748 control |= SM501_DC_PANEL_CONTROL_8BPP;
749 break;
750
751 case 16:
752 control |= SM501_DC_PANEL_CONTROL_16BPP;
753 break;
754
755 case 32:
756 control |= SM501_DC_PANEL_CONTROL_32BPP;
757 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
758 break;
759
760 default:
761 BUG();
762 }
763
764 writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
765
766 /* panel plane top left and bottom right location */
767
768 writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
769
770 reg = var->xres - 1;
771 reg |= (var->yres - 1) << 16;
772
773 writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
774
775 /* program panel control register */
776
777 control |= SM501_DC_PANEL_CONTROL_TE; /* enable PANEL timing */
778 control |= SM501_DC_PANEL_CONTROL_EN; /* enable PANEL gfx plane */
779
780 if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
781 control |= SM501_DC_PANEL_CONTROL_HSP;
782
783 if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
784 control |= SM501_DC_PANEL_CONTROL_VSP;
785
786 writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
787 sm501fb_sync_regs(fbi);
788
789 /* ensure the panel interface is not tristated at this point */
790
791 sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL,
792 0, SM501_SYSCTRL_PANEL_TRISTATE);
793
794 /* power the panel up */
795 sm501fb_panel_power(fbi, 1);
796 return 0;
797 }
798
799
800 /* chan_to_field
801 *
802 * convert a colour value into a field position
803 *
804 * from pxafb.c
805 */
806
807 static inline unsigned int chan_to_field(unsigned int chan,
808 struct fb_bitfield *bf)
809 {
810 chan &= 0xffff;
811 chan >>= 16 - bf->length;
812 return chan << bf->offset;
813 }
814
815 /* sm501fb_setcolreg
816 *
817 * set the colour mapping for modes that support palettised data
818 */
819
820 static int sm501fb_setcolreg(unsigned regno,
821 unsigned red, unsigned green, unsigned blue,
822 unsigned transp, struct fb_info *info)
823 {
824 struct sm501fb_par *par = info->par;
825 struct sm501fb_info *fbi = par->info;
826 void __iomem *base = fbi->regs;
827 unsigned int val;
828
829 if (par->head == HEAD_CRT)
830 base += SM501_DC_CRT_PALETTE;
831 else
832 base += SM501_DC_PANEL_PALETTE;
833
834 switch (info->fix.visual) {
835 case FB_VISUAL_TRUECOLOR:
836 /* true-colour, use pseuo-palette */
837
838 if (regno < 16) {
839 u32 *pal = par->pseudo_palette;
840
841 val = chan_to_field(red, &info->var.red);
842 val |= chan_to_field(green, &info->var.green);
843 val |= chan_to_field(blue, &info->var.blue);
844
845 pal[regno] = val;
846 }
847 break;
848
849 case FB_VISUAL_PSEUDOCOLOR:
850 if (regno < 256) {
851 val = (red >> 8) << 16;
852 val |= (green >> 8) << 8;
853 val |= blue >> 8;
854
855 writel(val, base + (regno * 4));
856 }
857
858 break;
859
860 default:
861 return 1; /* unknown type */
862 }
863
864 return 0;
865 }
866
867 /* sm501fb_blank_pnl
868 *
869 * Blank or un-blank the panel interface
870 */
871
872 static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info)
873 {
874 struct sm501fb_par *par = info->par;
875 struct sm501fb_info *fbi = par->info;
876
877 dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
878
879 switch (blank_mode) {
880 case FB_BLANK_POWERDOWN:
881 sm501fb_panel_power(fbi, 0);
882 break;
883
884 case FB_BLANK_UNBLANK:
885 sm501fb_panel_power(fbi, 1);
886 break;
887
888 case FB_BLANK_NORMAL:
889 case FB_BLANK_VSYNC_SUSPEND:
890 case FB_BLANK_HSYNC_SUSPEND:
891 default:
892 return 1;
893 }
894
895 return 0;
896 }
897
898 /* sm501fb_blank_crt
899 *
900 * Blank or un-blank the crt interface
901 */
902
903 static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
904 {
905 struct sm501fb_par *par = info->par;
906 struct sm501fb_info *fbi = par->info;
907 unsigned long ctrl;
908
909 dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
910
911 ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL);
912
913 switch (blank_mode) {
914 case FB_BLANK_POWERDOWN:
915 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
916 sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0);
917
918 case FB_BLANK_NORMAL:
919 ctrl |= SM501_DC_CRT_CONTROL_BLANK;
920 break;
921
922 case FB_BLANK_UNBLANK:
923 ctrl &= ~SM501_DC_CRT_CONTROL_BLANK;
924 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
925 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
926 break;
927
928 case FB_BLANK_VSYNC_SUSPEND:
929 case FB_BLANK_HSYNC_SUSPEND:
930 default:
931 return 1;
932
933 }
934
935 writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
936 sm501fb_sync_regs(fbi);
937
938 return 0;
939 }
940
941 /* sm501fb_cursor
942 *
943 * set or change the hardware cursor parameters
944 */
945
946 static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
947 {
948 struct sm501fb_par *par = info->par;
949 struct sm501fb_info *fbi = par->info;
950 void __iomem *base = fbi->regs;
951 unsigned long hwc_addr;
952 unsigned long fg, bg;
953
954 dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor);
955
956 if (par->head == HEAD_CRT)
957 base += SM501_DC_CRT_HWC_BASE;
958 else
959 base += SM501_DC_PANEL_HWC_BASE;
960
961 /* check not being asked to exceed capabilities */
962
963 if (cursor->image.width > 64)
964 return -EINVAL;
965
966 if (cursor->image.height > 64)
967 return -EINVAL;
968
969 if (cursor->image.depth > 1)
970 return -EINVAL;
971
972 hwc_addr = readl(base + SM501_OFF_HWC_ADDR);
973
974 if (cursor->enable)
975 writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
976 else
977 writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
978
979 /* set data */
980 if (cursor->set & FB_CUR_SETPOS) {
981 unsigned int x = cursor->image.dx;
982 unsigned int y = cursor->image.dy;
983
984 if (x >= 2048 || y >= 2048 )
985 return -EINVAL;
986
987 dev_dbg(fbi->dev, "set position %d,%d\n", x, y);
988
989 //y += cursor->image.height;
990
991 writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
992 }
993
994 if (cursor->set & FB_CUR_SETCMAP) {
995 unsigned int bg_col = cursor->image.bg_color;
996 unsigned int fg_col = cursor->image.fg_color;
997
998 dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n",
999 __func__, bg_col, fg_col);
1000
1001 bg = ((info->cmap.red[bg_col] & 0xF8) << 8) |
1002 ((info->cmap.green[bg_col] & 0xFC) << 3) |
1003 ((info->cmap.blue[bg_col] & 0xF8) >> 3);
1004
1005 fg = ((info->cmap.red[fg_col] & 0xF8) << 8) |
1006 ((info->cmap.green[fg_col] & 0xFC) << 3) |
1007 ((info->cmap.blue[fg_col] & 0xF8) >> 3);
1008
1009 dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg);
1010
1011 writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
1012 writel(fg, base + SM501_OFF_HWC_COLOR_3);
1013 }
1014
1015 if (cursor->set & FB_CUR_SETSIZE ||
1016 cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
1017 /* SM501 cursor is a two bpp 64x64 bitmap this routine
1018 * clears it to transparent then combines the cursor
1019 * shape plane with the colour plane to set the
1020 * cursor */
1021 int x, y;
1022 const unsigned char *pcol = cursor->image.data;
1023 const unsigned char *pmsk = cursor->mask;
1024 void __iomem *dst = par->cursor.k_addr;
1025 unsigned char dcol = 0;
1026 unsigned char dmsk = 0;
1027 unsigned int op;
1028
1029 dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n",
1030 __func__, cursor->image.width, cursor->image.height);
1031
1032 for (op = 0; op < (64*64*2)/8; op+=4)
1033 writel(0x0, dst + op);
1034
1035 for (y = 0; y < cursor->image.height; y++) {
1036 for (x = 0; x < cursor->image.width; x++) {
1037 if ((x % 8) == 0) {
1038 dcol = *pcol++;
1039 dmsk = *pmsk++;
1040 } else {
1041 dcol >>= 1;
1042 dmsk >>= 1;
1043 }
1044
1045 if (dmsk & 1) {
1046 op = (dcol & 1) ? 1 : 3;
1047 op <<= ((x % 4) * 2);
1048
1049 op |= readb(dst + (x / 4));
1050 writeb(op, dst + (x / 4));
1051 }
1052 }
1053 dst += (64*2)/8;
1054 }
1055 }
1056
1057 sm501fb_sync_regs(fbi); /* ensure cursor data flushed */
1058 return 0;
1059 }
1060
1061 /* sm501fb_crtsrc_show
1062 *
1063 * device attribute code to show where the crt output is sourced from
1064 */
1065
1066 static ssize_t sm501fb_crtsrc_show(struct device *dev,
1067 struct device_attribute *attr, char *buf)
1068 {
1069 struct sm501fb_info *info = dev_get_drvdata(dev);
1070 unsigned long ctrl;
1071
1072 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1073 ctrl &= SM501_DC_CRT_CONTROL_SEL;
1074
1075 return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel");
1076 }
1077
1078 /* sm501fb_crtsrc_show
1079 *
1080 * device attribute code to set where the crt output is sourced from
1081 */
1082
1083 static ssize_t sm501fb_crtsrc_store(struct device *dev,
1084 struct device_attribute *attr,
1085 const char *buf, size_t len)
1086 {
1087 struct sm501fb_info *info = dev_get_drvdata(dev);
1088 enum sm501_controller head;
1089 unsigned long ctrl;
1090
1091 if (len < 1)
1092 return -EINVAL;
1093
1094 if (strnicmp(buf, "crt", 3) == 0)
1095 head = HEAD_CRT;
1096 else if (strnicmp(buf, "panel", 5) == 0)
1097 head = HEAD_PANEL;
1098 else
1099 return -EINVAL;
1100
1101 dev_info(dev, "setting crt source to head %d\n", head);
1102
1103 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1104
1105 if (head == HEAD_CRT) {
1106 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1107 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
1108 ctrl |= SM501_DC_CRT_CONTROL_TE;
1109 } else {
1110 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1111 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
1112 ctrl &= ~SM501_DC_CRT_CONTROL_TE;
1113 }
1114
1115 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1116 sm501fb_sync_regs(info);
1117
1118 return len;
1119 }
1120
1121 /* Prepare the device_attr for registration with sysfs later */
1122 static DEVICE_ATTR(crt_src, 0666, sm501fb_crtsrc_show, sm501fb_crtsrc_store);
1123
1124 /* sm501fb_show_regs
1125 *
1126 * show the primary sm501 registers
1127 */
1128 static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr,
1129 unsigned int start, unsigned int len)
1130 {
1131 void __iomem *mem = info->regs;
1132 char *buf = ptr;
1133 unsigned int reg;
1134
1135 for (reg = start; reg < (len + start); reg += 4)
1136 ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg));
1137
1138 return ptr - buf;
1139 }
1140
1141 /* sm501fb_debug_show_crt
1142 *
1143 * show the crt control and cursor registers
1144 */
1145
1146 static ssize_t sm501fb_debug_show_crt(struct device *dev,
1147 struct device_attribute *attr, char *buf)
1148 {
1149 struct sm501fb_info *info = dev_get_drvdata(dev);
1150 char *ptr = buf;
1151
1152 ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40);
1153 ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10);
1154
1155 return ptr - buf;
1156 }
1157
1158 static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL);
1159
1160 /* sm501fb_debug_show_pnl
1161 *
1162 * show the panel control and cursor registers
1163 */
1164
1165 static ssize_t sm501fb_debug_show_pnl(struct device *dev,
1166 struct device_attribute *attr, char *buf)
1167 {
1168 struct sm501fb_info *info = dev_get_drvdata(dev);
1169 char *ptr = buf;
1170
1171 ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40);
1172 ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10);
1173
1174 return ptr - buf;
1175 }
1176
1177 static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL);
1178
1179 /* framebuffer ops */
1180
1181 static struct fb_ops sm501fb_ops_crt = {
1182 .owner = THIS_MODULE,
1183 .fb_check_var = sm501fb_check_var_crt,
1184 .fb_set_par = sm501fb_set_par_crt,
1185 .fb_blank = sm501fb_blank_crt,
1186 .fb_setcolreg = sm501fb_setcolreg,
1187 .fb_pan_display = sm501fb_pan_crt,
1188 .fb_cursor = sm501fb_cursor,
1189 .fb_fillrect = cfb_fillrect,
1190 .fb_copyarea = cfb_copyarea,
1191 .fb_imageblit = cfb_imageblit,
1192 };
1193
1194 static struct fb_ops sm501fb_ops_pnl = {
1195 .owner = THIS_MODULE,
1196 .fb_check_var = sm501fb_check_var_pnl,
1197 .fb_set_par = sm501fb_set_par_pnl,
1198 .fb_pan_display = sm501fb_pan_pnl,
1199 .fb_blank = sm501fb_blank_pnl,
1200 .fb_setcolreg = sm501fb_setcolreg,
1201 .fb_cursor = sm501fb_cursor,
1202 .fb_fillrect = cfb_fillrect,
1203 .fb_copyarea = cfb_copyarea,
1204 .fb_imageblit = cfb_imageblit,
1205 };
1206
1207 /* sm501fb_info_alloc
1208 *
1209 * creates and initialises an sm501fb_info structure
1210 */
1211
1212 static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt,
1213 struct fb_info *fbinfo_pnl)
1214 {
1215 struct sm501fb_info *info;
1216 struct sm501fb_par *par;
1217
1218 info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
1219 if (info) {
1220 /* set the references back */
1221
1222 par = fbinfo_crt->par;
1223 par->info = info;
1224 par->head = HEAD_CRT;
1225 fbinfo_crt->pseudo_palette = &par->pseudo_palette;
1226
1227 par = fbinfo_pnl->par;
1228 par->info = info;
1229 par->head = HEAD_PANEL;
1230 fbinfo_pnl->pseudo_palette = &par->pseudo_palette;
1231
1232 /* store the two fbs into our info */
1233 info->fb[HEAD_CRT] = fbinfo_crt;
1234 info->fb[HEAD_PANEL] = fbinfo_pnl;
1235 }
1236
1237 return info;
1238 }
1239
1240 /* sm501_init_cursor
1241 *
1242 * initialise hw cursor parameters
1243 */
1244
1245 static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
1246 {
1247 struct sm501fb_par *par = fbi->par;
1248 struct sm501fb_info *info = par->info;
1249 int ret;
1250
1251 par->cursor_regs = info->regs + reg_base;
1252
1253 ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
1254 if (ret < 0)
1255 return ret;
1256
1257 /* initialise the colour registers */
1258
1259 writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR);
1260
1261 writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
1262 writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
1263 writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
1264 sm501fb_sync_regs(info);
1265
1266 return 0;
1267 }
1268
1269 /* sm501fb_info_start
1270 *
1271 * fills the par structure claiming resources and remapping etc.
1272 */
1273
1274 static int sm501fb_start(struct sm501fb_info *info,
1275 struct platform_device *pdev)
1276 {
1277 struct resource *res;
1278 struct device *dev;
1279 int k;
1280 int ret;
1281
1282 info->dev = dev = &pdev->dev;
1283 platform_set_drvdata(pdev, info);
1284
1285 info->irq = ret = platform_get_irq(pdev, 0);
1286 if (ret < 0) {
1287 /* we currently do not use the IRQ */
1288 dev_warn(dev, "no irq for device\n");
1289 }
1290
1291 /* allocate, reserve and remap resources for registers */
1292 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1293 if (res == NULL) {
1294 dev_err(dev, "no resource definition for registers\n");
1295 ret = -ENOENT;
1296 goto err_release;
1297 }
1298
1299 info->regs_res = request_mem_region(res->start,
1300 res->end - res->start,
1301 pdev->name);
1302
1303 if (info->regs_res == NULL) {
1304 dev_err(dev, "cannot claim registers\n");
1305 ret = -ENXIO;
1306 goto err_release;
1307 }
1308
1309 info->regs = ioremap(res->start, (res->end - res->start)+1);
1310 if (info->regs == NULL) {
1311 dev_err(dev, "cannot remap registers\n");
1312 ret = -ENXIO;
1313 goto err_regs_res;
1314 }
1315
1316 /* allocate, reserve resources for framebuffer */
1317 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
1318 if (res == NULL) {
1319 dev_err(dev, "no memory resource defined\n");
1320 ret = -ENXIO;
1321 goto err_regs_map;
1322 }
1323
1324 info->fbmem_res = request_mem_region(res->start,
1325 (res->end - res->start)+1,
1326 pdev->name);
1327 if (info->fbmem_res == NULL) {
1328 dev_err(dev, "cannot claim framebuffer\n");
1329 ret = -ENXIO;
1330 goto err_regs_map;
1331 }
1332
1333 info->fbmem = ioremap(res->start, (res->end - res->start)+1);
1334 if (info->fbmem == NULL) {
1335 dev_err(dev, "cannot remap framebuffer\n");
1336 goto err_mem_res;
1337 }
1338
1339 info->fbmem_len = (res->end - res->start)+1;
1340
1341 /* clear framebuffer memory - avoids garbage data on unused fb */
1342 memset(info->fbmem, 0, info->fbmem_len);
1343
1344 /* clear palette ram - undefined at power on */
1345 for (k = 0; k < (256 * 3); k++)
1346 writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
1347
1348 /* enable display controller */
1349 sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1);
1350
1351 /* setup cursors */
1352
1353 sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR);
1354 sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR);
1355
1356 return 0; /* everything is setup */
1357
1358 err_mem_res:
1359 release_resource(info->fbmem_res);
1360 kfree(info->fbmem_res);
1361
1362 err_regs_map:
1363 iounmap(info->regs);
1364
1365 err_regs_res:
1366 release_resource(info->regs_res);
1367 kfree(info->regs_res);
1368
1369 err_release:
1370 return ret;
1371 }
1372
1373 static void sm501fb_stop(struct sm501fb_info *info)
1374 {
1375 /* disable display controller */
1376 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1377
1378 iounmap(info->fbmem);
1379 release_resource(info->fbmem_res);
1380 kfree(info->fbmem_res);
1381
1382 iounmap(info->regs);
1383 release_resource(info->regs_res);
1384 kfree(info->regs_res);
1385 }
1386
1387 static void sm501fb_info_release(struct sm501fb_info *info)
1388 {
1389 kfree(info);
1390 }
1391
1392 static int sm501fb_init_fb(struct fb_info *fb,
1393 enum sm501_controller head,
1394 const char *fbname)
1395 {
1396 struct sm501_platdata_fbsub *pd;
1397 struct sm501fb_par *par = fb->par;
1398 struct sm501fb_info *info = par->info;
1399 unsigned long ctrl;
1400 unsigned int enable;
1401 int ret;
1402
1403 switch (head) {
1404 case HEAD_CRT:
1405 pd = info->pdata->fb_crt;
1406 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1407 enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0;
1408
1409 /* ensure we set the correct source register */
1410 if (info->pdata->fb_route != SM501_FB_CRT_PANEL) {
1411 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1412 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1413 }
1414
1415 break;
1416
1417 case HEAD_PANEL:
1418 pd = info->pdata->fb_pnl;
1419 ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL);
1420 enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0;
1421 break;
1422
1423 default:
1424 pd = NULL; /* stop compiler warnings */
1425 ctrl = 0;
1426 enable = 0;
1427 BUG();
1428 }
1429
1430 dev_info(info->dev, "fb %s %sabled at start\n",
1431 fbname, enable ? "en" : "dis");
1432
1433 /* check to see if our routing allows this */
1434
1435 if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) {
1436 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1437 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1438 enable = 0;
1439 }
1440
1441 strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id));
1442
1443 memcpy(&par->ops,
1444 (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
1445 sizeof(struct fb_ops));
1446
1447 /* update ops dependant on what we've been passed */
1448
1449 if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
1450 par->ops.fb_cursor = NULL;
1451
1452 fb->fbops = &par->ops;
1453 fb->flags = FBINFO_FLAG_DEFAULT |
1454 FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
1455
1456 /* fixed data */
1457
1458 fb->fix.type = FB_TYPE_PACKED_PIXELS;
1459 fb->fix.type_aux = 0;
1460 fb->fix.xpanstep = 1;
1461 fb->fix.ypanstep = 1;
1462 fb->fix.ywrapstep = 0;
1463 fb->fix.accel = FB_ACCEL_NONE;
1464
1465 /* screenmode */
1466
1467 fb->var.nonstd = 0;
1468 fb->var.activate = FB_ACTIVATE_NOW;
1469 fb->var.accel_flags = 0;
1470 fb->var.vmode = FB_VMODE_NONINTERLACED;
1471 fb->var.bits_per_pixel = 16;
1472
1473 if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
1474 /* TODO read the mode from the current display */
1475
1476 } else {
1477 if (pd->def_mode) {
1478 dev_info(info->dev, "using supplied mode\n");
1479 fb_videomode_to_var(&fb->var, pd->def_mode);
1480
1481 fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8;
1482 fb->var.xres_virtual = fb->var.xres;
1483 fb->var.yres_virtual = fb->var.yres;
1484 } else {
1485 ret = fb_find_mode(&fb->var, fb,
1486 NULL, NULL, 0, NULL, 8);
1487
1488 if (ret == 0 || ret == 4) {
1489 dev_err(info->dev,
1490 "failed to get initial mode\n");
1491 return -EINVAL;
1492 }
1493 }
1494 }
1495
1496 /* initialise and set the palette */
1497 fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0);
1498 fb_set_cmap(&fb->cmap, fb);
1499
1500 ret = (fb->fbops->fb_check_var)(&fb->var, fb);
1501 if (ret)
1502 dev_err(info->dev, "check_var() failed on initial setup?\n");
1503
1504 /* ensure we've activated our new configuration */
1505 (fb->fbops->fb_set_par)(fb);
1506
1507 return 0;
1508 }
1509
1510 /* default platform data if none is supplied (ie, PCI device) */
1511
1512 static struct sm501_platdata_fbsub sm501fb_pdata_crt = {
1513 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1514 SM501FB_FLAG_USE_HWCURSOR |
1515 SM501FB_FLAG_USE_HWACCEL |
1516 SM501FB_FLAG_DISABLE_AT_EXIT),
1517
1518 };
1519
1520 static struct sm501_platdata_fbsub sm501fb_pdata_pnl = {
1521 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1522 SM501FB_FLAG_USE_HWCURSOR |
1523 SM501FB_FLAG_USE_HWACCEL |
1524 SM501FB_FLAG_DISABLE_AT_EXIT),
1525 };
1526
1527 static struct sm501_platdata_fb sm501fb_def_pdata = {
1528 .fb_route = SM501_FB_OWN,
1529 .fb_crt = &sm501fb_pdata_crt,
1530 .fb_pnl = &sm501fb_pdata_pnl,
1531 };
1532
1533 static char driver_name_crt[] = "sm501fb-crt";
1534 static char driver_name_pnl[] = "sm501fb-panel";
1535
1536 static int __init sm501fb_probe(struct platform_device *pdev)
1537 {
1538 struct sm501fb_info *info;
1539 struct device *dev = &pdev->dev;
1540 struct fb_info *fbinfo_crt;
1541 struct fb_info *fbinfo_pnl;
1542 int ret;
1543
1544 /* allocate our framebuffers */
1545
1546 fbinfo_crt = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
1547 if (fbinfo_crt == NULL) {
1548 dev_err(dev, "cannot allocate crt framebuffer\n");
1549 return -ENOMEM;
1550 }
1551
1552 fbinfo_pnl = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
1553 if (fbinfo_pnl == NULL) {
1554 dev_err(dev, "cannot allocate panel framebuffer\n");
1555 ret = -ENOMEM;
1556 goto fbinfo_crt_alloc_fail;
1557 }
1558
1559 info = sm501fb_info_alloc(fbinfo_crt, fbinfo_pnl);
1560 if (info == NULL) {
1561 dev_err(dev, "cannot allocate par\n");
1562 ret = -ENOMEM;
1563 goto sm501fb_alloc_fail;
1564 }
1565
1566 if (dev->parent->platform_data) {
1567 struct sm501_platdata *pd = dev->parent->platform_data;
1568 info->pdata = pd->fb;
1569 }
1570
1571 if (info->pdata == NULL) {
1572 dev_info(dev, "using default configuration data\n");
1573 info->pdata = &sm501fb_def_pdata;
1574 }
1575
1576 /* start the framebuffers */
1577
1578 ret = sm501fb_start(info, pdev);
1579 if (ret) {
1580 dev_err(dev, "cannot initialise SM501\n");
1581 goto sm501fb_start_fail;
1582 }
1583
1584 /* CRT framebuffer setup */
1585
1586 ret = sm501fb_init_fb(fbinfo_crt, HEAD_CRT, driver_name_crt);
1587 if (ret) {
1588 dev_err(dev, "cannot initialise CRT fb\n");
1589 goto sm501fb_start_fail;
1590 }
1591
1592 /* Panel framebuffer setup */
1593
1594 ret = sm501fb_init_fb(fbinfo_pnl, HEAD_PANEL, driver_name_pnl);
1595 if (ret) {
1596 dev_err(dev, "cannot initialise Panel fb\n");
1597 goto sm501fb_start_fail;
1598 }
1599
1600 /* register framebuffers */
1601
1602 ret = register_framebuffer(fbinfo_crt);
1603 if (ret < 0) {
1604 dev_err(dev, "failed to register CRT fb (%d)\n", ret);
1605 goto register_crt_fail;
1606 }
1607
1608 ret = register_framebuffer(fbinfo_pnl);
1609 if (ret < 0) {
1610 dev_err(dev, "failed to register panel fb (%d)\n", ret);
1611 goto register_pnl_fail;
1612 }
1613
1614 dev_info(dev, "fb%d: %s frame buffer device\n",
1615 fbinfo_crt->node, fbinfo_crt->fix.id);
1616
1617 dev_info(dev, "fb%d: %s frame buffer device\n",
1618 fbinfo_pnl->node, fbinfo_pnl->fix.id);
1619
1620 /* create device files */
1621
1622 ret = device_create_file(dev, &dev_attr_crt_src);
1623 if (ret)
1624 goto crtsrc_fail;
1625
1626 ret = device_create_file(dev, &dev_attr_fbregs_pnl);
1627 if (ret)
1628 goto fbregs_pnl_fail;
1629
1630 ret = device_create_file(dev, &dev_attr_fbregs_crt);
1631 if (ret)
1632 goto fbregs_crt_fail;
1633
1634 /* we registered, return ok */
1635 return 0;
1636
1637 fbregs_crt_fail:
1638 device_remove_file(dev, &dev_attr_fbregs_pnl);
1639
1640 fbregs_pnl_fail:
1641 device_remove_file(dev, &dev_attr_crt_src);
1642
1643 crtsrc_fail:
1644 unregister_framebuffer(fbinfo_pnl);
1645
1646 register_pnl_fail:
1647 unregister_framebuffer(fbinfo_crt);
1648
1649 register_crt_fail:
1650 sm501fb_stop(info);
1651
1652 sm501fb_start_fail:
1653 sm501fb_info_release(info);
1654
1655 sm501fb_alloc_fail:
1656 framebuffer_release(fbinfo_pnl);
1657
1658 fbinfo_crt_alloc_fail:
1659 framebuffer_release(fbinfo_crt);
1660
1661 return ret;
1662 }
1663
1664
1665 /*
1666 * Cleanup
1667 */
1668 static int sm501fb_remove(struct platform_device *pdev)
1669 {
1670 struct sm501fb_info *info = platform_get_drvdata(pdev);
1671 struct fb_info *fbinfo_crt = info->fb[0];
1672 struct fb_info *fbinfo_pnl = info->fb[1];
1673
1674 device_remove_file(&pdev->dev, &dev_attr_fbregs_crt);
1675 device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl);
1676 device_remove_file(&pdev->dev, &dev_attr_crt_src);
1677
1678 unregister_framebuffer(fbinfo_crt);
1679 unregister_framebuffer(fbinfo_pnl);
1680
1681 sm501fb_stop(info);
1682 sm501fb_info_release(info);
1683
1684 framebuffer_release(fbinfo_pnl);
1685 framebuffer_release(fbinfo_crt);
1686
1687 return 0;
1688 }
1689
1690 #ifdef CONFIG_PM
1691
1692 static int sm501fb_suspend_fb(struct sm501fb_info *info,
1693 enum sm501_controller head)
1694 {
1695 struct fb_info *fbi = info->fb[head];
1696 struct sm501fb_par *par = fbi->par;
1697
1698 if (par->screen.size == 0)
1699 return 0;
1700
1701 /* blank the relevant interface to ensure unit power minimised */
1702 (par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi);
1703
1704 /* tell console/fb driver we are suspending */
1705
1706 acquire_console_sem();
1707 fb_set_suspend(fbi, 1);
1708 release_console_sem();
1709
1710 /* backup copies in case chip is powered down over suspend */
1711
1712 par->store_fb = vmalloc(par->screen.size);
1713 if (par->store_fb == NULL) {
1714 dev_err(info->dev, "no memory to store screen\n");
1715 return -ENOMEM;
1716 }
1717
1718 par->store_cursor = vmalloc(par->cursor.size);
1719 if (par->store_cursor == NULL) {
1720 dev_err(info->dev, "no memory to store cursor\n");
1721 goto err_nocursor;
1722 }
1723
1724 dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb);
1725 dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor);
1726
1727 memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size);
1728 memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size);
1729
1730 return 0;
1731
1732 err_nocursor:
1733 vfree(par->store_fb);
1734 par->store_fb = NULL;
1735
1736 return -ENOMEM;
1737 }
1738
1739 static void sm501fb_resume_fb(struct sm501fb_info *info,
1740 enum sm501_controller head)
1741 {
1742 struct fb_info *fbi = info->fb[head];
1743 struct sm501fb_par *par = fbi->par;
1744
1745 if (par->screen.size == 0)
1746 return;
1747
1748 /* re-activate the configuration */
1749
1750 (par->ops.fb_set_par)(fbi);
1751
1752 /* restore the data */
1753
1754 dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb);
1755 dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor);
1756
1757 if (par->store_fb)
1758 memcpy_toio(par->screen.k_addr, par->store_fb,
1759 par->screen.size);
1760
1761 if (par->store_cursor)
1762 memcpy_toio(par->cursor.k_addr, par->store_cursor,
1763 par->cursor.size);
1764
1765 acquire_console_sem();
1766 fb_set_suspend(fbi, 0);
1767 release_console_sem();
1768
1769 vfree(par->store_fb);
1770 vfree(par->store_cursor);
1771 }
1772
1773
1774 /* suspend and resume support */
1775
1776 static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state)
1777 {
1778 struct sm501fb_info *info = platform_get_drvdata(pdev);
1779
1780 /* store crt control to resume with */
1781 info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1782
1783 sm501fb_suspend_fb(info, HEAD_CRT);
1784 sm501fb_suspend_fb(info, HEAD_PANEL);
1785
1786 /* turn off the clocks, in case the device is not powered down */
1787 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1788
1789 return 0;
1790 }
1791
1792 #define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP | \
1793 SM501_DC_CRT_CONTROL_SEL)
1794
1795
1796 static int sm501fb_resume(struct platform_device *pdev)
1797 {
1798 struct sm501fb_info *info = platform_get_drvdata(pdev);
1799 unsigned long crt_ctrl;
1800
1801 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1);
1802
1803 /* restore the items we want to be saved for crt control */
1804
1805 crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1806 crt_ctrl &= ~SM501_CRT_CTRL_SAVE;
1807 crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE;
1808 writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
1809
1810 sm501fb_resume_fb(info, HEAD_CRT);
1811 sm501fb_resume_fb(info, HEAD_PANEL);
1812
1813 return 0;
1814 }
1815
1816 #else
1817 #define sm501fb_suspend NULL
1818 #define sm501fb_resume NULL
1819 #endif
1820
1821 static struct platform_driver sm501fb_driver = {
1822 .probe = sm501fb_probe,
1823 .remove = sm501fb_remove,
1824 .suspend = sm501fb_suspend,
1825 .resume = sm501fb_resume,
1826 .driver = {
1827 .name = "sm501-fb",
1828 .owner = THIS_MODULE,
1829 },
1830 };
1831
1832 static int __devinit sm501fb_init(void)
1833 {
1834 return platform_driver_register(&sm501fb_driver);
1835 }
1836
1837 static void __exit sm501fb_cleanup(void)
1838 {
1839 platform_driver_unregister(&sm501fb_driver);
1840 }
1841
1842 module_init(sm501fb_init);
1843 module_exit(sm501fb_cleanup);
1844
1845 MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
1846 MODULE_DESCRIPTION("SM501 Framebuffer driver");
1847 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support