viafb: use proper pci config API
[linux/fpc-iii.git] / drivers / video / backlight / ltv350qv.h
blob189112e3fc7aedf5532364c783011f7cdf804607
1 /*
2 * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
4 * Copyright (C) 2006, 2007 Atmel Corporation
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #ifndef __LTV350QV_H
11 #define __LTV350QV_H
13 #define LTV_OPC_INDEX 0x74
14 #define LTV_OPC_DATA 0x76
16 #define LTV_ID 0x00 /* ID Read */
17 #define LTV_IFCTL 0x01 /* Display Interface Control */
18 #define LTV_DATACTL 0x02 /* Display Data Control */
19 #define LTV_ENTRY_MODE 0x03 /* Entry Mode */
20 #define LTV_GATECTL1 0x04 /* Gate Control 1 */
21 #define LTV_GATECTL2 0x05 /* Gate Control 2 */
22 #define LTV_VBP 0x06 /* Vertical Back Porch */
23 #define LTV_HBP 0x07 /* Horizontal Back Porch */
24 #define LTV_SOTCTL 0x08 /* Source Output Timing Control */
25 #define LTV_PWRCTL1 0x09 /* Power Control 1 */
26 #define LTV_PWRCTL2 0x0a /* Power Control 2 */
27 #define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
29 /* Bit definitions for LTV_IFCTL */
30 #define LTV_IM (1 << 15)
31 #define LTV_NMD (1 << 14)
32 #define LTV_SSMD (1 << 13)
33 #define LTV_REV (1 << 7)
34 #define LTV_NL(x) (((x) & 0x001f) << 0)
36 /* Bit definitions for LTV_DATACTL */
37 #define LTV_DS_SAME (0 << 12)
38 #define LTV_DS_D_TO_S (1 << 12)
39 #define LTV_DS_S_TO_D (2 << 12)
40 #define LTV_CHS_384 (0 << 9)
41 #define LTV_CHS_480 (1 << 9)
42 #define LTV_CHS_492 (2 << 9)
43 #define LTV_DF_RGB (0 << 6)
44 #define LTV_DF_RGBX (1 << 6)
45 #define LTV_DF_XRGB (2 << 6)
46 #define LTV_RGB_RGB (0 << 2)
47 #define LTV_RGB_BGR (1 << 2)
48 #define LTV_RGB_GRB (2 << 2)
49 #define LTV_RGB_RBG (3 << 2)
51 /* Bit definitions for LTV_ENTRY_MODE */
52 #define LTV_VSPL_ACTIVE_LOW (0 << 15)
53 #define LTV_VSPL_ACTIVE_HIGH (1 << 15)
54 #define LTV_HSPL_ACTIVE_LOW (0 << 14)
55 #define LTV_HSPL_ACTIVE_HIGH (1 << 14)
56 #define LTV_DPL_SAMPLE_RISING (0 << 13)
57 #define LTV_DPL_SAMPLE_FALLING (1 << 13)
58 #define LTV_EPL_ACTIVE_LOW (0 << 12)
59 #define LTV_EPL_ACTIVE_HIGH (1 << 12)
60 #define LTV_SS_LEFT_TO_RIGHT (0 << 8)
61 #define LTV_SS_RIGHT_TO_LEFT (1 << 8)
62 #define LTV_STB (1 << 1)
64 /* Bit definitions for LTV_GATECTL1 */
65 #define LTV_CLW(x) (((x) & 0x0007) << 12)
66 #define LTV_GAON (1 << 5)
67 #define LTV_SDR (1 << 3)
69 /* Bit definitions for LTV_GATECTL2 */
70 #define LTV_NW_INV_FRAME (0 << 14)
71 #define LTV_NW_INV_1LINE (1 << 14)
72 #define LTV_NW_INV_2LINE (2 << 14)
73 #define LTV_DSC (1 << 12)
74 #define LTV_GIF (1 << 8)
75 #define LTV_FHN (1 << 7)
76 #define LTV_FTI(x) (((x) & 0x0003) << 4)
77 #define LTV_FWI(x) (((x) & 0x0003) << 0)
79 /* Bit definitions for LTV_SOTCTL */
80 #define LTV_SDT(x) (((x) & 0x0007) << 10)
81 #define LTV_EQ(x) (((x) & 0x0007) << 2)
83 /* Bit definitions for LTV_PWRCTL1 */
84 #define LTV_VCOM_DISABLE (1 << 14)
85 #define LTV_VCOMOUT_ENABLE (1 << 11)
86 #define LTV_POWER_ON (1 << 9)
87 #define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
88 #define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
90 /* Bit definitions for LTV_PWRCTL2 */
91 #define LTV_VCOML_ENABLE (1 << 13)
92 #define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
93 #define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
95 #endif /* __LTV350QV_H */