2 * TI TRF7970a RFID/NFC Transceiver Driver
4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Erick Macias <emacias@ti.com>
7 * Author: Felipe Balbi <balbi@ti.com>
8 * Author: Mark A. Greer <mgreer@animalcreek.com>
10 * This program is free software: you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 of
12 * the License as published by the Free Software Foundation.
15 #include <linux/module.h>
16 #include <linux/device.h>
17 #include <linux/netdevice.h>
18 #include <linux/interrupt.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/nfc.h>
21 #include <linux/skbuff.h>
22 #include <linux/delay.h>
23 #include <linux/gpio.h>
25 #include <linux/of_gpio.h>
26 #include <linux/spi/spi.h>
27 #include <linux/regulator/consumer.h>
29 #include <net/nfc/nfc.h>
30 #include <net/nfc/digital.h>
32 /* There are 3 ways the host can communicate with the trf7970a:
33 * parallel mode, SPI with Slave Select (SS) mode, and SPI without
34 * SS mode. The driver only supports the two SPI modes.
36 * The trf7970a is very timing sensitive and the VIN, EN2, and EN
37 * pins must asserted in that order and with specific delays in between.
38 * The delays used in the driver were provided by TI and have been
39 * confirmed to work with this driver. There is a bug with the current
40 * version of the trf7970a that requires that EN2 remain low no matter
41 * what. If it goes high, it will generate an RF field even when in
42 * passive target mode. TI has indicated that the chip will work okay
43 * when EN2 is left low. The 'en2-rf-quirk' device tree property
44 * indicates that trf7970a currently being used has the erratum and
45 * that EN2 must be kept low.
47 * Timeouts are implemented using the delayed workqueue kernel facility.
48 * Timeouts are required so things don't hang when there is no response
49 * from the trf7970a (or tag). Using this mechanism creates a race with
50 * interrupts, however. That is, an interrupt and a timeout could occur
51 * closely enough together that one is blocked by the mutex while the other
52 * executes. When the timeout handler executes first and blocks the
53 * interrupt handler, it will eventually set the state to IDLE so the
54 * interrupt handler will check the state and exit with no harm done.
55 * When the interrupt handler executes first and blocks the timeout handler,
56 * the cancel_delayed_work() call will know that it didn't cancel the
57 * work item (i.e., timeout) and will return zero. That return code is
58 * used by the timer handler to indicate that it should ignore the timeout
61 * Aborting an active command isn't as simple as it seems because the only
62 * way to abort a command that's already been sent to the tag is so turn
63 * off power to the tag. If we do that, though, we'd have to go through
64 * the entire anticollision procedure again but the digital layer doesn't
65 * support that. So, if an abort is received before trf7970a_send_cmd()
66 * has sent the command to the tag, it simply returns -ECANCELED. If the
67 * command has already been sent to the tag, then the driver continues
68 * normally and recieves the response data (or error) but just before
69 * sending the data upstream, it frees the rx_skb and sends -ECANCELED
70 * upstream instead. If the command failed, that error will be sent
73 * When recieving data from a tag and the interrupt status register has
74 * only the SRX bit set, it means that all of the data has been received
75 * (once what's in the fifo has been read). However, depending on timing
76 * an interrupt status with only the SRX bit set may not be recived. In
77 * those cases, the timeout mechanism is used to wait 20 ms in case more
78 * data arrives. After 20 ms, it is assumed that all of the data has been
79 * received and the accumulated rx data is sent upstream. The
80 * 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose
81 * (i.e., it indicates that some data has been received but we're not sure
82 * if there is more coming so a timeout in this state means all data has
83 * been received and there isn't an error). The delay is 20 ms since delays
84 * of ~16 ms have been observed during testing.
86 * When transmitting a frame larger than the FIFO size (127 bytes), the
87 * driver will wait 20 ms for the FIFO to drain past the low-watermark
88 * and generate an interrupt. The low-watermark set to 32 bytes so the
89 * interrupt should fire after 127 - 32 = 95 bytes have been sent. At
90 * the lowest possible bit rate (6.62 kbps for 15693), it will take up
91 * to ~14.35 ms so 20 ms is used for the timeout.
93 * Type 2 write and sector select commands respond with a 4-bit ACK or NACK.
94 * Having only 4 bits in the FIFO won't normally generate an interrupt so
95 * driver enables the '4_bit_RX' bit of the Special Functions register 1
96 * to cause an interrupt in that case. Leaving that bit for a read command
97 * messes up the data returned so it is only enabled when the framing is
98 * 'NFC_DIGITAL_FRAMING_NFCA_T2T' and the command is not a read command.
99 * Unfortunately, that means that the driver has to peek into tx frames
100 * when the framing is 'NFC_DIGITAL_FRAMING_NFCA_T2T'. This is done by
101 * the trf7970a_per_cmd_config() routine.
103 * ISO/IEC 15693 frames specify whether to use single or double sub-carrier
104 * frequencies and whether to use low or high data rates in the flags byte
105 * of the frame. This means that the driver has to peek at all 15693 frames
106 * to determine what speed to set the communication to. In addition, write
107 * and lock commands use the OPTION flag to indicate that an EOF must be
108 * sent to the tag before it will send its response. So the driver has to
109 * examine all frames for that reason too.
111 * It is unclear how long to wait before sending the EOF. According to the
112 * Note under Table 1-1 in section 1.6 of
113 * http://www.ti.com/lit/ug/scbu011/scbu011.pdf, that wait should be at least
114 * 10 ms for TI Tag-it HF-I tags; however testing has shown that is not long
115 * enough so 20 ms is used. So the timer is set to 40 ms - 20 ms to drain
116 * up to 127 bytes in the FIFO at the lowest bit rate plus another 20 ms to
117 * ensure the wait is long enough before sending the EOF. This seems to work
121 #define TRF7970A_SUPPORTED_PROTOCOLS \
122 (NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK | \
123 NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_FELICA_MASK | \
124 NFC_PROTO_ISO15693_MASK | NFC_PROTO_NFC_DEP_MASK)
126 #define TRF7970A_AUTOSUSPEND_DELAY 30000 /* 30 seconds */
127 #define TRF7970A_13MHZ_CLOCK_FREQUENCY 13560000
128 #define TRF7970A_27MHZ_CLOCK_FREQUENCY 27120000
131 #define TRF7970A_RX_SKB_ALLOC_SIZE 256
133 #define TRF7970A_FIFO_SIZE 127
135 /* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
136 #define TRF7970A_TX_MAX (4096 - 1)
138 #define TRF7970A_WAIT_FOR_TX_IRQ 20
139 #define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT 20
140 #define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT 20
141 #define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF 40
143 /* Guard times for various RF technologies (in us) */
144 #define TRF7970A_GUARD_TIME_NFCA 5000
145 #define TRF7970A_GUARD_TIME_NFCB 5000
146 #define TRF7970A_GUARD_TIME_NFCF 20000
147 #define TRF7970A_GUARD_TIME_15693 1000
150 /* Erratum: When reading IRQ Status register on trf7970a, we must issue a
151 * read continuous command for IRQ Status and Collision Position registers.
153 #define TRF7970A_QUIRK_IRQ_STATUS_READ BIT(0)
154 #define TRF7970A_QUIRK_EN2_MUST_STAY_LOW BIT(1)
155 #define TRF7970A_QUIRK_T5T_RMB_EXTRA_BYTE BIT(2)
157 /* Direct commands */
158 #define TRF7970A_CMD_IDLE 0x00
159 #define TRF7970A_CMD_SOFT_INIT 0x03
160 #define TRF7970A_CMD_RF_COLLISION 0x04
161 #define TRF7970A_CMD_RF_COLLISION_RESPONSE_N 0x05
162 #define TRF7970A_CMD_RF_COLLISION_RESPONSE_0 0x06
163 #define TRF7970A_CMD_FIFO_RESET 0x0f
164 #define TRF7970A_CMD_TRANSMIT_NO_CRC 0x10
165 #define TRF7970A_CMD_TRANSMIT 0x11
166 #define TRF7970A_CMD_DELAY_TRANSMIT_NO_CRC 0x12
167 #define TRF7970A_CMD_DELAY_TRANSMIT 0x13
168 #define TRF7970A_CMD_EOF 0x14
169 #define TRF7970A_CMD_CLOSE_SLOT 0x15
170 #define TRF7970A_CMD_BLOCK_RX 0x16
171 #define TRF7970A_CMD_ENABLE_RX 0x17
172 #define TRF7970A_CMD_TEST_INT_RF 0x18
173 #define TRF7970A_CMD_TEST_EXT_RF 0x19
174 #define TRF7970A_CMD_RX_GAIN_ADJUST 0x1a
176 /* Bits determining whether its a direct command or register R/W,
177 * whether to use a continuous SPI transaction or not, and the actual
178 * direct cmd opcode or regster address.
180 #define TRF7970A_CMD_BIT_CTRL BIT(7)
181 #define TRF7970A_CMD_BIT_RW BIT(6)
182 #define TRF7970A_CMD_BIT_CONTINUOUS BIT(5)
183 #define TRF7970A_CMD_BIT_OPCODE(opcode) ((opcode) & 0x1f)
185 /* Registers addresses */
186 #define TRF7970A_CHIP_STATUS_CTRL 0x00
187 #define TRF7970A_ISO_CTRL 0x01
188 #define TRF7970A_ISO14443B_TX_OPTIONS 0x02
189 #define TRF7970A_ISO14443A_HIGH_BITRATE_OPTIONS 0x03
190 #define TRF7970A_TX_TIMER_SETTING_H_BYTE 0x04
191 #define TRF7970A_TX_TIMER_SETTING_L_BYTE 0x05
192 #define TRF7970A_TX_PULSE_LENGTH_CTRL 0x06
193 #define TRF7970A_RX_NO_RESPONSE_WAIT 0x07
194 #define TRF7970A_RX_WAIT_TIME 0x08
195 #define TRF7970A_MODULATOR_SYS_CLK_CTRL 0x09
196 #define TRF7970A_RX_SPECIAL_SETTINGS 0x0a
197 #define TRF7970A_REG_IO_CTRL 0x0b
198 #define TRF7970A_IRQ_STATUS 0x0c
199 #define TRF7970A_COLLISION_IRQ_MASK 0x0d
200 #define TRF7970A_COLLISION_POSITION 0x0e
201 #define TRF7970A_RSSI_OSC_STATUS 0x0f
202 #define TRF7970A_SPECIAL_FCN_REG1 0x10
203 #define TRF7970A_SPECIAL_FCN_REG2 0x11
204 #define TRF7970A_RAM1 0x12
205 #define TRF7970A_RAM2 0x13
206 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS 0x14
207 #define TRF7970A_NFC_LOW_FIELD_LEVEL 0x16
208 #define TRF7970A_NFCID1 0x17
209 #define TRF7970A_NFC_TARGET_LEVEL 0x18
210 #define TRF79070A_NFC_TARGET_PROTOCOL 0x19
211 #define TRF7970A_TEST_REGISTER1 0x1a
212 #define TRF7970A_TEST_REGISTER2 0x1b
213 #define TRF7970A_FIFO_STATUS 0x1c
214 #define TRF7970A_TX_LENGTH_BYTE1 0x1d
215 #define TRF7970A_TX_LENGTH_BYTE2 0x1e
216 #define TRF7970A_FIFO_IO_REGISTER 0x1f
218 /* Chip Status Control Register Bits */
219 #define TRF7970A_CHIP_STATUS_VRS5_3 BIT(0)
220 #define TRF7970A_CHIP_STATUS_REC_ON BIT(1)
221 #define TRF7970A_CHIP_STATUS_AGC_ON BIT(2)
222 #define TRF7970A_CHIP_STATUS_PM_ON BIT(3)
223 #define TRF7970A_CHIP_STATUS_RF_PWR BIT(4)
224 #define TRF7970A_CHIP_STATUS_RF_ON BIT(5)
225 #define TRF7970A_CHIP_STATUS_DIRECT BIT(6)
226 #define TRF7970A_CHIP_STATUS_STBY BIT(7)
228 /* ISO Control Register Bits */
229 #define TRF7970A_ISO_CTRL_15693_SGL_1OF4_662 0x00
230 #define TRF7970A_ISO_CTRL_15693_SGL_1OF256_662 0x01
231 #define TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648 0x02
232 #define TRF7970A_ISO_CTRL_15693_SGL_1OF256_2648 0x03
233 #define TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a 0x04
234 #define TRF7970A_ISO_CTRL_15693_DBL_1OF256_667 0x05
235 #define TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669 0x06
236 #define TRF7970A_ISO_CTRL_15693_DBL_1OF256_2669 0x07
237 #define TRF7970A_ISO_CTRL_14443A_106 0x08
238 #define TRF7970A_ISO_CTRL_14443A_212 0x09
239 #define TRF7970A_ISO_CTRL_14443A_424 0x0a
240 #define TRF7970A_ISO_CTRL_14443A_848 0x0b
241 #define TRF7970A_ISO_CTRL_14443B_106 0x0c
242 #define TRF7970A_ISO_CTRL_14443B_212 0x0d
243 #define TRF7970A_ISO_CTRL_14443B_424 0x0e
244 #define TRF7970A_ISO_CTRL_14443B_848 0x0f
245 #define TRF7970A_ISO_CTRL_FELICA_212 0x1a
246 #define TRF7970A_ISO_CTRL_FELICA_424 0x1b
247 #define TRF7970A_ISO_CTRL_NFC_NFCA_106 0x01
248 #define TRF7970A_ISO_CTRL_NFC_NFCF_212 0x02
249 #define TRF7970A_ISO_CTRL_NFC_NFCF_424 0x03
250 #define TRF7970A_ISO_CTRL_NFC_CE_14443A 0x00
251 #define TRF7970A_ISO_CTRL_NFC_CE_14443B 0x01
252 #define TRF7970A_ISO_CTRL_NFC_CE BIT(2)
253 #define TRF7970A_ISO_CTRL_NFC_ACTIVE BIT(3)
254 #define TRF7970A_ISO_CTRL_NFC_INITIATOR BIT(4)
255 #define TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE BIT(5)
256 #define TRF7970A_ISO_CTRL_RFID BIT(5)
257 #define TRF7970A_ISO_CTRL_DIR_MODE BIT(6)
258 #define TRF7970A_ISO_CTRL_RX_CRC_N BIT(7) /* true == No CRC */
260 #define TRF7970A_ISO_CTRL_RFID_SPEED_MASK 0x1f
262 /* Modulator and SYS_CLK Control Register Bits */
263 #define TRF7970A_MODULATOR_DEPTH(n) ((n) & 0x7)
264 #define TRF7970A_MODULATOR_DEPTH_ASK10 (TRF7970A_MODULATOR_DEPTH(0))
265 #define TRF7970A_MODULATOR_DEPTH_OOK (TRF7970A_MODULATOR_DEPTH(1))
266 #define TRF7970A_MODULATOR_DEPTH_ASK7 (TRF7970A_MODULATOR_DEPTH(2))
267 #define TRF7970A_MODULATOR_DEPTH_ASK8_5 (TRF7970A_MODULATOR_DEPTH(3))
268 #define TRF7970A_MODULATOR_DEPTH_ASK13 (TRF7970A_MODULATOR_DEPTH(4))
269 #define TRF7970A_MODULATOR_DEPTH_ASK16 (TRF7970A_MODULATOR_DEPTH(5))
270 #define TRF7970A_MODULATOR_DEPTH_ASK22 (TRF7970A_MODULATOR_DEPTH(6))
271 #define TRF7970A_MODULATOR_DEPTH_ASK30 (TRF7970A_MODULATOR_DEPTH(7))
272 #define TRF7970A_MODULATOR_EN_ANA BIT(3)
273 #define TRF7970A_MODULATOR_CLK(n) (((n) & 0x3) << 4)
274 #define TRF7970A_MODULATOR_CLK_DISABLED (TRF7970A_MODULATOR_CLK(0))
275 #define TRF7970A_MODULATOR_CLK_3_6 (TRF7970A_MODULATOR_CLK(1))
276 #define TRF7970A_MODULATOR_CLK_6_13 (TRF7970A_MODULATOR_CLK(2))
277 #define TRF7970A_MODULATOR_CLK_13_27 (TRF7970A_MODULATOR_CLK(3))
278 #define TRF7970A_MODULATOR_EN_OOK BIT(6)
279 #define TRF7970A_MODULATOR_27MHZ BIT(7)
281 #define TRF7970A_RX_SPECIAL_SETTINGS_NO_LIM BIT(0)
282 #define TRF7970A_RX_SPECIAL_SETTINGS_AGCR BIT(1)
283 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_0DB (0x0 << 2)
284 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_5DB (0x1 << 2)
285 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_10DB (0x2 << 2)
286 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_15DB (0x3 << 2)
287 #define TRF7970A_RX_SPECIAL_SETTINGS_HBT BIT(4)
288 #define TRF7970A_RX_SPECIAL_SETTINGS_M848 BIT(5)
289 #define TRF7970A_RX_SPECIAL_SETTINGS_C424 BIT(6)
290 #define TRF7970A_RX_SPECIAL_SETTINGS_C212 BIT(7)
292 #define TRF7970A_REG_IO_CTRL_VRS(v) ((v) & 0x07)
293 #define TRF7970A_REG_IO_CTRL_IO_LOW BIT(5)
294 #define TRF7970A_REG_IO_CTRL_EN_EXT_PA BIT(6)
295 #define TRF7970A_REG_IO_CTRL_AUTO_REG BIT(7)
297 /* IRQ Status Register Bits */
298 #define TRF7970A_IRQ_STATUS_NORESP BIT(0) /* ISO15693 only */
299 #define TRF7970A_IRQ_STATUS_NFC_COL_ERROR BIT(0)
300 #define TRF7970A_IRQ_STATUS_COL BIT(1)
301 #define TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR BIT(2)
302 #define TRF7970A_IRQ_STATUS_NFC_RF BIT(2)
303 #define TRF7970A_IRQ_STATUS_PARITY_ERROR BIT(3)
304 #define TRF7970A_IRQ_STATUS_NFC_SDD BIT(3)
305 #define TRF7970A_IRQ_STATUS_CRC_ERROR BIT(4)
306 #define TRF7970A_IRQ_STATUS_NFC_PROTO_ERROR BIT(4)
307 #define TRF7970A_IRQ_STATUS_FIFO BIT(5)
308 #define TRF7970A_IRQ_STATUS_SRX BIT(6)
309 #define TRF7970A_IRQ_STATUS_TX BIT(7)
311 #define TRF7970A_IRQ_STATUS_ERROR \
312 (TRF7970A_IRQ_STATUS_COL | \
313 TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR | \
314 TRF7970A_IRQ_STATUS_PARITY_ERROR | \
315 TRF7970A_IRQ_STATUS_CRC_ERROR)
317 #define TRF7970A_RSSI_OSC_STATUS_RSSI_MASK (BIT(2) | BIT(1) | BIT(0))
318 #define TRF7970A_RSSI_OSC_STATUS_RSSI_X_MASK (BIT(5) | BIT(4) | BIT(3))
319 #define TRF7970A_RSSI_OSC_STATUS_RSSI_OSC_OK BIT(6)
321 #define TRF7970A_SPECIAL_FCN_REG1_COL_7_6 BIT(0)
322 #define TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL BIT(1)
323 #define TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX BIT(2)
324 #define TRF7970A_SPECIAL_FCN_REG1_SP_DIR_MODE BIT(3)
325 #define TRF7970A_SPECIAL_FCN_REG1_NEXT_SLOT_37US BIT(4)
326 #define TRF7970A_SPECIAL_FCN_REG1_PAR43 BIT(5)
328 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_124 (0x0 << 2)
329 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_120 (0x1 << 2)
330 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_112 (0x2 << 2)
331 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 (0x3 << 2)
332 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_4 0x0
333 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_8 0x1
334 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_16 0x2
335 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32 0x3
337 #define TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(v) ((v) & 0x07)
338 #define TRF7970A_NFC_LOW_FIELD_LEVEL_CLEX_DIS BIT(7)
340 #define TRF7970A_NFC_TARGET_LEVEL_RFDET(v) ((v) & 0x07)
341 #define TRF7970A_NFC_TARGET_LEVEL_HI_RF BIT(3)
342 #define TRF7970A_NFC_TARGET_LEVEL_SDD_EN BIT(5)
343 #define TRF7970A_NFC_TARGET_LEVEL_LD_S_4BYTES (0x0 << 6)
344 #define TRF7970A_NFC_TARGET_LEVEL_LD_S_7BYTES (0x1 << 6)
345 #define TRF7970A_NFC_TARGET_LEVEL_LD_S_10BYTES (0x2 << 6)
347 #define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106 BIT(0)
348 #define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212 BIT(1)
349 #define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424 (BIT(0) | BIT(1))
350 #define TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B BIT(2)
351 #define TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 BIT(3)
352 #define TRF79070A_NFC_TARGET_PROTOCOL_FELICA BIT(4)
353 #define TRF79070A_NFC_TARGET_PROTOCOL_RF_L BIT(6)
354 #define TRF79070A_NFC_TARGET_PROTOCOL_RF_H BIT(7)
356 #define TRF79070A_NFC_TARGET_PROTOCOL_106A \
357 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
358 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
359 TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 | \
360 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
362 #define TRF79070A_NFC_TARGET_PROTOCOL_106B \
363 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
364 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
365 TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B | \
366 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
368 #define TRF79070A_NFC_TARGET_PROTOCOL_212F \
369 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
370 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
371 TRF79070A_NFC_TARGET_PROTOCOL_FELICA | \
372 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212)
374 #define TRF79070A_NFC_TARGET_PROTOCOL_424F \
375 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
376 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
377 TRF79070A_NFC_TARGET_PROTOCOL_FELICA | \
378 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424)
380 #define TRF7970A_FIFO_STATUS_OVERFLOW BIT(7)
382 /* NFC (ISO/IEC 14443A) Type 2 Tag commands */
383 #define NFC_T2T_CMD_READ 0x30
385 /* ISO 15693 commands codes */
386 #define ISO15693_CMD_INVENTORY 0x01
387 #define ISO15693_CMD_READ_SINGLE_BLOCK 0x20
388 #define ISO15693_CMD_WRITE_SINGLE_BLOCK 0x21
389 #define ISO15693_CMD_LOCK_BLOCK 0x22
390 #define ISO15693_CMD_READ_MULTIPLE_BLOCK 0x23
391 #define ISO15693_CMD_WRITE_MULTIPLE_BLOCK 0x24
392 #define ISO15693_CMD_SELECT 0x25
393 #define ISO15693_CMD_RESET_TO_READY 0x26
394 #define ISO15693_CMD_WRITE_AFI 0x27
395 #define ISO15693_CMD_LOCK_AFI 0x28
396 #define ISO15693_CMD_WRITE_DSFID 0x29
397 #define ISO15693_CMD_LOCK_DSFID 0x2a
398 #define ISO15693_CMD_GET_SYSTEM_INFO 0x2b
399 #define ISO15693_CMD_GET_MULTIPLE_BLOCK_SECURITY_STATUS 0x2c
401 /* ISO 15693 request and response flags */
402 #define ISO15693_REQ_FLAG_SUB_CARRIER BIT(0)
403 #define ISO15693_REQ_FLAG_DATA_RATE BIT(1)
404 #define ISO15693_REQ_FLAG_INVENTORY BIT(2)
405 #define ISO15693_REQ_FLAG_PROTOCOL_EXT BIT(3)
406 #define ISO15693_REQ_FLAG_SELECT BIT(4)
407 #define ISO15693_REQ_FLAG_AFI BIT(4)
408 #define ISO15693_REQ_FLAG_ADDRESS BIT(5)
409 #define ISO15693_REQ_FLAG_NB_SLOTS BIT(5)
410 #define ISO15693_REQ_FLAG_OPTION BIT(6)
412 #define ISO15693_REQ_FLAG_SPEED_MASK \
413 (ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE)
415 enum trf7970a_state
{
419 TRF7970A_ST_IDLE_RX_BLOCKED
,
420 TRF7970A_ST_WAIT_FOR_TX_FIFO
,
421 TRF7970A_ST_WAIT_FOR_RX_DATA
,
422 TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
,
423 TRF7970A_ST_WAIT_TO_ISSUE_EOF
,
424 TRF7970A_ST_LISTENING
,
425 TRF7970A_ST_LISTENING_MD
,
430 enum trf7970a_state state
;
432 struct spi_device
*spi
;
433 struct regulator
*regulator
;
434 struct nfc_digital_dev
*ddev
;
438 struct sk_buff
*tx_skb
;
439 struct sk_buff
*rx_skb
;
440 nfc_digital_cmd_complete_t cb
;
445 u8 modulator_sys_clk_ctrl
;
448 unsigned int guard_time
;
454 bool adjust_resp_len
;
458 unsigned int timeout
;
460 struct delayed_work timeout_work
;
464 static int trf7970a_cmd(struct trf7970a
*trf
, u8 opcode
)
466 u8 cmd
= TRF7970A_CMD_BIT_CTRL
| TRF7970A_CMD_BIT_OPCODE(opcode
);
469 dev_dbg(trf
->dev
, "cmd: 0x%x\n", cmd
);
471 ret
= spi_write(trf
->spi
, &cmd
, 1);
473 dev_err(trf
->dev
, "%s - cmd: 0x%x, ret: %d\n", __func__
, cmd
,
478 static int trf7970a_read(struct trf7970a
*trf
, u8 reg
, u8
*val
)
480 u8 addr
= TRF7970A_CMD_BIT_RW
| reg
;
483 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, val
, 1);
485 dev_err(trf
->dev
, "%s - addr: 0x%x, ret: %d\n", __func__
, addr
,
488 dev_dbg(trf
->dev
, "read(0x%x): 0x%x\n", addr
, *val
);
493 static int trf7970a_read_cont(struct trf7970a
*trf
, u8 reg
, u8
*buf
, size_t len
)
495 u8 addr
= reg
| TRF7970A_CMD_BIT_RW
| TRF7970A_CMD_BIT_CONTINUOUS
;
496 struct spi_transfer t
[2];
497 struct spi_message m
;
500 dev_dbg(trf
->dev
, "read_cont(0x%x, %zd)\n", addr
, len
);
502 spi_message_init(&m
);
504 memset(&t
, 0, sizeof(t
));
507 t
[0].len
= sizeof(addr
);
508 spi_message_add_tail(&t
[0], &m
);
512 spi_message_add_tail(&t
[1], &m
);
514 ret
= spi_sync(trf
->spi
, &m
);
516 dev_err(trf
->dev
, "%s - addr: 0x%x, ret: %d\n", __func__
, addr
,
521 static int trf7970a_write(struct trf7970a
*trf
, u8 reg
, u8 val
)
523 u8 buf
[2] = { reg
, val
};
526 dev_dbg(trf
->dev
, "write(0x%x): 0x%x\n", reg
, val
);
528 ret
= spi_write(trf
->spi
, buf
, 2);
530 dev_err(trf
->dev
, "%s - write: 0x%x 0x%x, ret: %d\n", __func__
,
531 buf
[0], buf
[1], ret
);
536 static int trf7970a_read_irqstatus(struct trf7970a
*trf
, u8
*status
)
542 addr
= TRF7970A_IRQ_STATUS
| TRF7970A_CMD_BIT_RW
;
544 if (trf
->quirks
& TRF7970A_QUIRK_IRQ_STATUS_READ
) {
545 addr
|= TRF7970A_CMD_BIT_CONTINUOUS
;
546 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, buf
, 2);
548 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, buf
, 1);
552 dev_err(trf
->dev
, "%s - irqstatus: Status read failed: %d\n",
560 static int trf7970a_read_target_proto(struct trf7970a
*trf
, u8
*target_proto
)
566 addr
= TRF79070A_NFC_TARGET_PROTOCOL
| TRF7970A_CMD_BIT_RW
|
567 TRF7970A_CMD_BIT_CONTINUOUS
;
569 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, buf
, 2);
571 dev_err(trf
->dev
, "%s - target_proto: Read failed: %d\n",
574 *target_proto
= buf
[0];
579 static int trf7970a_mode_detect(struct trf7970a
*trf
, u8
*rf_tech
)
582 u8 target_proto
, tech
;
584 ret
= trf7970a_read_target_proto(trf
, &target_proto
);
588 switch (target_proto
) {
589 case TRF79070A_NFC_TARGET_PROTOCOL_106A
:
590 tech
= NFC_DIGITAL_RF_TECH_106A
;
592 case TRF79070A_NFC_TARGET_PROTOCOL_106B
:
593 tech
= NFC_DIGITAL_RF_TECH_106B
;
595 case TRF79070A_NFC_TARGET_PROTOCOL_212F
:
596 tech
= NFC_DIGITAL_RF_TECH_212F
;
598 case TRF79070A_NFC_TARGET_PROTOCOL_424F
:
599 tech
= NFC_DIGITAL_RF_TECH_424F
;
602 dev_dbg(trf
->dev
, "%s - mode_detect: target_proto: 0x%x\n",
603 __func__
, target_proto
);
612 static void trf7970a_send_upstream(struct trf7970a
*trf
)
614 dev_kfree_skb_any(trf
->tx_skb
);
617 if (trf
->rx_skb
&& !IS_ERR(trf
->rx_skb
) && !trf
->aborting
)
618 print_hex_dump_debug("trf7970a rx data: ", DUMP_PREFIX_NONE
,
619 16, 1, trf
->rx_skb
->data
, trf
->rx_skb
->len
,
622 trf
->state
= TRF7970A_ST_IDLE
;
625 dev_dbg(trf
->dev
, "Abort process complete\n");
627 if (!IS_ERR(trf
->rx_skb
)) {
628 kfree_skb(trf
->rx_skb
);
629 trf
->rx_skb
= ERR_PTR(-ECANCELED
);
632 trf
->aborting
= false;
635 if (trf
->adjust_resp_len
) {
637 skb_trim(trf
->rx_skb
, trf
->rx_skb
->len
- 1);
639 trf
->adjust_resp_len
= false;
642 trf
->cb(trf
->ddev
, trf
->cb_arg
, trf
->rx_skb
);
647 static void trf7970a_send_err_upstream(struct trf7970a
*trf
, int errno
)
649 dev_dbg(trf
->dev
, "Error - state: %d, errno: %d\n", trf
->state
, errno
);
651 cancel_delayed_work(&trf
->timeout_work
);
653 kfree_skb(trf
->rx_skb
);
654 trf
->rx_skb
= ERR_PTR(errno
);
656 trf7970a_send_upstream(trf
);
659 static int trf7970a_transmit(struct trf7970a
*trf
, struct sk_buff
*skb
,
660 unsigned int len
, u8
*prefix
, unsigned int prefix_len
)
662 struct spi_transfer t
[2];
663 struct spi_message m
;
664 unsigned int timeout
;
667 print_hex_dump_debug("trf7970a tx data: ", DUMP_PREFIX_NONE
,
668 16, 1, skb
->data
, len
, false);
670 spi_message_init(&m
);
672 memset(&t
, 0, sizeof(t
));
674 t
[0].tx_buf
= prefix
;
675 t
[0].len
= prefix_len
;
676 spi_message_add_tail(&t
[0], &m
);
678 t
[1].tx_buf
= skb
->data
;
680 spi_message_add_tail(&t
[1], &m
);
682 ret
= spi_sync(trf
->spi
, &m
);
684 dev_err(trf
->dev
, "%s - Can't send tx data: %d\n", __func__
,
692 trf
->state
= TRF7970A_ST_WAIT_FOR_TX_FIFO
;
693 timeout
= TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT
;
695 if (trf
->issue_eof
) {
696 trf
->state
= TRF7970A_ST_WAIT_TO_ISSUE_EOF
;
697 timeout
= TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF
;
699 trf
->state
= TRF7970A_ST_WAIT_FOR_RX_DATA
;
702 timeout
= TRF7970A_WAIT_FOR_TX_IRQ
;
704 timeout
= trf
->timeout
;
708 dev_dbg(trf
->dev
, "Setting timeout for %d ms, state: %d\n", timeout
,
711 schedule_delayed_work(&trf
->timeout_work
, msecs_to_jiffies(timeout
));
716 static void trf7970a_fill_fifo(struct trf7970a
*trf
)
718 struct sk_buff
*skb
= trf
->tx_skb
;
724 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
, &fifo_bytes
);
726 trf7970a_send_err_upstream(trf
, ret
);
730 dev_dbg(trf
->dev
, "Filling FIFO - fifo_bytes: 0x%x\n", fifo_bytes
);
732 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
734 /* Calculate how much more data can be written to the fifo */
735 len
= TRF7970A_FIFO_SIZE
- fifo_bytes
;
737 schedule_delayed_work(&trf
->timeout_work
,
738 msecs_to_jiffies(TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT
));
742 len
= min(skb
->len
, len
);
744 prefix
= TRF7970A_CMD_BIT_CONTINUOUS
| TRF7970A_FIFO_IO_REGISTER
;
746 ret
= trf7970a_transmit(trf
, skb
, len
, &prefix
, sizeof(prefix
));
748 trf7970a_send_err_upstream(trf
, ret
);
751 static void trf7970a_drain_fifo(struct trf7970a
*trf
, u8 status
)
753 struct sk_buff
*skb
= trf
->rx_skb
;
757 if (status
& TRF7970A_IRQ_STATUS_ERROR
) {
758 trf7970a_send_err_upstream(trf
, -EIO
);
762 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
, &fifo_bytes
);
764 trf7970a_send_err_upstream(trf
, ret
);
768 dev_dbg(trf
->dev
, "Draining FIFO - fifo_bytes: 0x%x\n", fifo_bytes
);
770 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
775 if (fifo_bytes
> skb_tailroom(skb
)) {
776 skb
= skb_copy_expand(skb
, skb_headroom(skb
),
777 max_t(int, fifo_bytes
,
778 TRF7970A_RX_SKB_ALLOC_SIZE
),
781 trf7970a_send_err_upstream(trf
, -ENOMEM
);
785 kfree_skb(trf
->rx_skb
);
789 ret
= trf7970a_read_cont(trf
, TRF7970A_FIFO_IO_REGISTER
,
790 skb_put(skb
, fifo_bytes
), fifo_bytes
);
792 trf7970a_send_err_upstream(trf
, ret
);
796 /* If received Type 2 ACK/NACK, shift right 4 bits and pass up */
797 if ((trf
->framing
== NFC_DIGITAL_FRAMING_NFCA_T2T
) && (skb
->len
== 1) &&
798 (trf
->special_fcn_reg1
==
799 TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX
)) {
801 status
= TRF7970A_IRQ_STATUS_SRX
;
803 trf
->state
= TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
;
805 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
, &fifo_bytes
);
807 trf7970a_send_err_upstream(trf
, ret
);
811 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
813 /* If there are bytes in the FIFO, set status to '0' so
814 * the if stmt below doesn't fire and the driver will wait
815 * for the trf7970a to generate another RX interrupt.
822 if (status
== TRF7970A_IRQ_STATUS_SRX
) { /* Receive complete */
823 trf7970a_send_upstream(trf
);
827 dev_dbg(trf
->dev
, "Setting timeout for %d ms\n",
828 TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT
);
830 schedule_delayed_work(&trf
->timeout_work
,
831 msecs_to_jiffies(TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT
));
834 static irqreturn_t
trf7970a_irq(int irq
, void *dev_id
)
836 struct trf7970a
*trf
= dev_id
;
838 u8 status
, fifo_bytes
, iso_ctrl
;
840 mutex_lock(&trf
->lock
);
842 if (trf
->state
== TRF7970A_ST_RF_OFF
) {
843 mutex_unlock(&trf
->lock
);
847 ret
= trf7970a_read_irqstatus(trf
, &status
);
849 mutex_unlock(&trf
->lock
);
853 dev_dbg(trf
->dev
, "IRQ - state: %d, status: 0x%x\n", trf
->state
,
857 mutex_unlock(&trf
->lock
);
861 switch (trf
->state
) {
862 case TRF7970A_ST_IDLE
:
863 case TRF7970A_ST_IDLE_RX_BLOCKED
:
864 /* If initiator and getting interrupts caused by RF noise,
865 * turn off the receiver to avoid unnecessary interrupts.
866 * It will be turned back on in trf7970a_send_cmd() when
867 * the next command is issued.
869 if (trf
->is_initiator
&& (status
& TRF7970A_IRQ_STATUS_ERROR
)) {
870 trf7970a_cmd(trf
, TRF7970A_CMD_BLOCK_RX
);
871 trf
->state
= TRF7970A_ST_IDLE_RX_BLOCKED
;
874 trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
876 case TRF7970A_ST_WAIT_FOR_TX_FIFO
:
877 if (status
& TRF7970A_IRQ_STATUS_TX
) {
878 trf
->ignore_timeout
=
879 !cancel_delayed_work(&trf
->timeout_work
);
880 trf7970a_fill_fifo(trf
);
882 trf7970a_send_err_upstream(trf
, -EIO
);
885 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
886 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
887 if (status
& TRF7970A_IRQ_STATUS_SRX
) {
888 trf
->ignore_timeout
=
889 !cancel_delayed_work(&trf
->timeout_work
);
890 trf7970a_drain_fifo(trf
, status
);
891 } else if (status
& TRF7970A_IRQ_STATUS_FIFO
) {
892 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
,
895 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
898 trf7970a_send_err_upstream(trf
, ret
);
899 else if (!fifo_bytes
)
900 trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
901 } else if ((status
== TRF7970A_IRQ_STATUS_TX
) ||
902 (!trf
->is_initiator
&&
903 (status
== (TRF7970A_IRQ_STATUS_TX
|
904 TRF7970A_IRQ_STATUS_NFC_RF
)))) {
905 trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
908 trf
->ignore_timeout
= !cancel_delayed_work(
910 trf
->rx_skb
= ERR_PTR(0);
911 trf7970a_send_upstream(trf
);
915 if (trf
->is_initiator
)
918 iso_ctrl
= trf
->iso_ctrl
;
920 switch (trf
->framing
) {
921 case NFC_DIGITAL_FRAMING_NFCA_STANDARD
:
922 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT_NO_CRC
;
923 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
924 trf
->iso_ctrl
= 0xff; /* Force ISO_CTRL write */
926 case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A
:
927 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
928 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
929 trf
->iso_ctrl
= 0xff; /* Force ISO_CTRL write */
931 case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE
:
932 ret
= trf7970a_write(trf
,
933 TRF7970A_SPECIAL_FCN_REG1
,
934 TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL
);
936 goto err_unlock_exit
;
938 trf
->special_fcn_reg1
=
939 TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL
;
945 if (iso_ctrl
!= trf
->iso_ctrl
) {
946 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
,
949 goto err_unlock_exit
;
951 trf
->iso_ctrl
= iso_ctrl
;
954 trf7970a_send_err_upstream(trf
, -EIO
);
957 case TRF7970A_ST_WAIT_TO_ISSUE_EOF
:
958 if (status
!= TRF7970A_IRQ_STATUS_TX
)
959 trf7970a_send_err_upstream(trf
, -EIO
);
961 case TRF7970A_ST_LISTENING
:
962 if (status
& TRF7970A_IRQ_STATUS_SRX
) {
963 trf
->ignore_timeout
=
964 !cancel_delayed_work(&trf
->timeout_work
);
965 trf7970a_drain_fifo(trf
, status
);
966 } else if (!(status
& TRF7970A_IRQ_STATUS_NFC_RF
)) {
967 trf7970a_send_err_upstream(trf
, -EIO
);
970 case TRF7970A_ST_LISTENING_MD
:
971 if (status
& TRF7970A_IRQ_STATUS_SRX
) {
972 trf
->ignore_timeout
=
973 !cancel_delayed_work(&trf
->timeout_work
);
975 ret
= trf7970a_mode_detect(trf
, &trf
->md_rf_tech
);
977 trf7970a_send_err_upstream(trf
, ret
);
979 trf
->state
= TRF7970A_ST_LISTENING
;
980 trf7970a_drain_fifo(trf
, status
);
982 } else if (!(status
& TRF7970A_IRQ_STATUS_NFC_RF
)) {
983 trf7970a_send_err_upstream(trf
, -EIO
);
987 dev_err(trf
->dev
, "%s - Driver in invalid state: %d\n",
988 __func__
, trf
->state
);
992 mutex_unlock(&trf
->lock
);
996 static void trf7970a_issue_eof(struct trf7970a
*trf
)
1000 dev_dbg(trf
->dev
, "Issuing EOF\n");
1002 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
1004 trf7970a_send_err_upstream(trf
, ret
);
1006 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_EOF
);
1008 trf7970a_send_err_upstream(trf
, ret
);
1010 trf
->state
= TRF7970A_ST_WAIT_FOR_RX_DATA
;
1012 dev_dbg(trf
->dev
, "Setting timeout for %d ms, state: %d\n",
1013 trf
->timeout
, trf
->state
);
1015 schedule_delayed_work(&trf
->timeout_work
,
1016 msecs_to_jiffies(trf
->timeout
));
1019 static void trf7970a_timeout_work_handler(struct work_struct
*work
)
1021 struct trf7970a
*trf
= container_of(work
, struct trf7970a
,
1024 dev_dbg(trf
->dev
, "Timeout - state: %d, ignore_timeout: %d\n",
1025 trf
->state
, trf
->ignore_timeout
);
1027 mutex_lock(&trf
->lock
);
1029 if (trf
->ignore_timeout
)
1030 trf
->ignore_timeout
= false;
1031 else if (trf
->state
== TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
)
1032 trf7970a_drain_fifo(trf
, TRF7970A_IRQ_STATUS_SRX
);
1033 else if (trf
->state
== TRF7970A_ST_WAIT_TO_ISSUE_EOF
)
1034 trf7970a_issue_eof(trf
);
1036 trf7970a_send_err_upstream(trf
, -ETIMEDOUT
);
1038 mutex_unlock(&trf
->lock
);
1041 static int trf7970a_init(struct trf7970a
*trf
)
1045 dev_dbg(trf
->dev
, "Initializing device - state: %d\n", trf
->state
);
1047 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_SOFT_INIT
);
1051 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_IDLE
);
1055 ret
= trf7970a_write(trf
, TRF7970A_REG_IO_CTRL
,
1056 trf
->io_ctrl
| TRF7970A_REG_IO_CTRL_VRS(0x1));
1060 ret
= trf7970a_write(trf
, TRF7970A_NFC_TARGET_LEVEL
, 0);
1064 usleep_range(1000, 2000);
1066 trf
->chip_status_ctrl
&= ~TRF7970A_CHIP_STATUS_RF_ON
;
1068 ret
= trf7970a_write(trf
, TRF7970A_MODULATOR_SYS_CLK_CTRL
,
1069 trf
->modulator_sys_clk_ctrl
);
1073 ret
= trf7970a_write(trf
, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS
,
1074 TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96
|
1075 TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32
);
1079 ret
= trf7970a_write(trf
, TRF7970A_SPECIAL_FCN_REG1
, 0);
1083 trf
->special_fcn_reg1
= 0;
1085 trf
->iso_ctrl
= 0xff;
1089 dev_dbg(trf
->dev
, "Couldn't init device: %d\n", ret
);
1093 static void trf7970a_switch_rf_off(struct trf7970a
*trf
)
1095 if ((trf
->state
== TRF7970A_ST_PWR_OFF
) ||
1096 (trf
->state
== TRF7970A_ST_RF_OFF
))
1099 dev_dbg(trf
->dev
, "Switching rf off\n");
1101 trf
->chip_status_ctrl
&= ~TRF7970A_CHIP_STATUS_RF_ON
;
1103 trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
, trf
->chip_status_ctrl
);
1105 trf
->aborting
= false;
1106 trf
->state
= TRF7970A_ST_RF_OFF
;
1108 pm_runtime_mark_last_busy(trf
->dev
);
1109 pm_runtime_put_autosuspend(trf
->dev
);
1112 static int trf7970a_switch_rf_on(struct trf7970a
*trf
)
1116 dev_dbg(trf
->dev
, "Switching rf on\n");
1118 pm_runtime_get_sync(trf
->dev
);
1120 if (trf
->state
!= TRF7970A_ST_RF_OFF
) { /* Power on, RF off */
1121 dev_err(trf
->dev
, "%s - Incorrect state: %d\n", __func__
,
1126 ret
= trf7970a_init(trf
);
1128 dev_err(trf
->dev
, "%s - Can't initialize: %d\n", __func__
, ret
);
1132 trf
->state
= TRF7970A_ST_IDLE
;
1137 static int trf7970a_switch_rf(struct nfc_digital_dev
*ddev
, bool on
)
1139 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1142 dev_dbg(trf
->dev
, "Switching RF - state: %d, on: %d\n", trf
->state
, on
);
1144 mutex_lock(&trf
->lock
);
1147 switch (trf
->state
) {
1148 case TRF7970A_ST_PWR_OFF
:
1149 case TRF7970A_ST_RF_OFF
:
1150 ret
= trf7970a_switch_rf_on(trf
);
1152 case TRF7970A_ST_IDLE
:
1153 case TRF7970A_ST_IDLE_RX_BLOCKED
:
1156 dev_err(trf
->dev
, "%s - Invalid request: %d %d\n",
1157 __func__
, trf
->state
, on
);
1158 trf7970a_switch_rf_off(trf
);
1162 switch (trf
->state
) {
1163 case TRF7970A_ST_PWR_OFF
:
1164 case TRF7970A_ST_RF_OFF
:
1167 dev_err(trf
->dev
, "%s - Invalid request: %d %d\n",
1168 __func__
, trf
->state
, on
);
1171 case TRF7970A_ST_IDLE
:
1172 case TRF7970A_ST_IDLE_RX_BLOCKED
:
1173 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
1174 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
1175 trf7970a_switch_rf_off(trf
);
1179 mutex_unlock(&trf
->lock
);
1183 static int trf7970a_in_config_rf_tech(struct trf7970a
*trf
, int tech
)
1187 dev_dbg(trf
->dev
, "rf technology: %d\n", tech
);
1190 case NFC_DIGITAL_RF_TECH_106A
:
1191 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_14443A_106
;
1192 trf
->modulator_sys_clk_ctrl
=
1193 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1194 TRF7970A_MODULATOR_DEPTH_OOK
;
1195 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCA
;
1197 case NFC_DIGITAL_RF_TECH_106B
:
1198 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_14443B_106
;
1199 trf
->modulator_sys_clk_ctrl
=
1200 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1201 TRF7970A_MODULATOR_DEPTH_ASK10
;
1202 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCB
;
1204 case NFC_DIGITAL_RF_TECH_212F
:
1205 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_FELICA_212
;
1206 trf
->modulator_sys_clk_ctrl
=
1207 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1208 TRF7970A_MODULATOR_DEPTH_ASK10
;
1209 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCF
;
1211 case NFC_DIGITAL_RF_TECH_424F
:
1212 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_FELICA_424
;
1213 trf
->modulator_sys_clk_ctrl
=
1214 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1215 TRF7970A_MODULATOR_DEPTH_ASK10
;
1216 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCF
;
1218 case NFC_DIGITAL_RF_TECH_ISO15693
:
1219 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648
;
1220 trf
->modulator_sys_clk_ctrl
=
1221 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1222 TRF7970A_MODULATOR_DEPTH_OOK
;
1223 trf
->guard_time
= TRF7970A_GUARD_TIME_15693
;
1226 dev_dbg(trf
->dev
, "Unsupported rf technology: %d\n", tech
);
1230 trf
->technology
= tech
;
1232 /* If in initiator mode and not changing the RF tech due to a
1233 * PSL sequence (indicated by 'trf->iso_ctrl == 0xff' from
1234 * trf7970a_init()), clear the NFC Target Detection Level register
1237 if (trf
->iso_ctrl
== 0xff)
1238 ret
= trf7970a_write(trf
, TRF7970A_NFC_TARGET_LEVEL
, 0);
1243 static int trf7970a_is_rf_field(struct trf7970a
*trf
, bool *is_rf_field
)
1248 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1249 trf
->chip_status_ctrl
| TRF7970A_CHIP_STATUS_REC_ON
);
1253 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_TEST_EXT_RF
);
1257 usleep_range(50, 60);
1259 ret
= trf7970a_read(trf
, TRF7970A_RSSI_OSC_STATUS
, &rssi
);
1263 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1264 trf
->chip_status_ctrl
);
1268 if (rssi
& TRF7970A_RSSI_OSC_STATUS_RSSI_MASK
)
1269 *is_rf_field
= true;
1271 *is_rf_field
= false;
1276 static int trf7970a_in_config_framing(struct trf7970a
*trf
, int framing
)
1278 u8 iso_ctrl
= trf
->iso_ctrl_tech
;
1279 bool is_rf_field
= false;
1282 dev_dbg(trf
->dev
, "framing: %d\n", framing
);
1285 case NFC_DIGITAL_FRAMING_NFCA_SHORT
:
1286 case NFC_DIGITAL_FRAMING_NFCA_STANDARD
:
1287 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT_NO_CRC
;
1288 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
1290 case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A
:
1291 case NFC_DIGITAL_FRAMING_NFCA_T4T
:
1292 case NFC_DIGITAL_FRAMING_NFCB
:
1293 case NFC_DIGITAL_FRAMING_NFCB_T4T
:
1294 case NFC_DIGITAL_FRAMING_NFCF
:
1295 case NFC_DIGITAL_FRAMING_NFCF_T3T
:
1296 case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY
:
1297 case NFC_DIGITAL_FRAMING_ISO15693_T5T
:
1298 case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP
:
1299 case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP
:
1300 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1301 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
1303 case NFC_DIGITAL_FRAMING_NFCA_T2T
:
1304 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1305 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
1308 dev_dbg(trf
->dev
, "Unsupported Framing: %d\n", framing
);
1312 trf
->framing
= framing
;
1314 if (!(trf
->chip_status_ctrl
& TRF7970A_CHIP_STATUS_RF_ON
)) {
1315 ret
= trf7970a_is_rf_field(trf
, &is_rf_field
);
1323 if (iso_ctrl
!= trf
->iso_ctrl
) {
1324 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
, iso_ctrl
);
1328 trf
->iso_ctrl
= iso_ctrl
;
1330 ret
= trf7970a_write(trf
, TRF7970A_MODULATOR_SYS_CLK_CTRL
,
1331 trf
->modulator_sys_clk_ctrl
);
1336 if (!(trf
->chip_status_ctrl
& TRF7970A_CHIP_STATUS_RF_ON
)) {
1337 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1338 trf
->chip_status_ctrl
|
1339 TRF7970A_CHIP_STATUS_RF_ON
);
1343 trf
->chip_status_ctrl
|= TRF7970A_CHIP_STATUS_RF_ON
;
1345 usleep_range(trf
->guard_time
, trf
->guard_time
+ 1000);
1351 static int trf7970a_in_configure_hw(struct nfc_digital_dev
*ddev
, int type
,
1354 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1357 dev_dbg(trf
->dev
, "Configure hw - type: %d, param: %d\n", type
, param
);
1359 mutex_lock(&trf
->lock
);
1361 trf
->is_initiator
= true;
1363 if ((trf
->state
== TRF7970A_ST_PWR_OFF
) ||
1364 (trf
->state
== TRF7970A_ST_RF_OFF
)) {
1365 ret
= trf7970a_switch_rf_on(trf
);
1371 case NFC_DIGITAL_CONFIG_RF_TECH
:
1372 ret
= trf7970a_in_config_rf_tech(trf
, param
);
1374 case NFC_DIGITAL_CONFIG_FRAMING
:
1375 ret
= trf7970a_in_config_framing(trf
, param
);
1378 dev_dbg(trf
->dev
, "Unknown type: %d\n", type
);
1383 mutex_unlock(&trf
->lock
);
1387 static int trf7970a_is_iso15693_write_or_lock(u8 cmd
)
1390 case ISO15693_CMD_WRITE_SINGLE_BLOCK
:
1391 case ISO15693_CMD_LOCK_BLOCK
:
1392 case ISO15693_CMD_WRITE_MULTIPLE_BLOCK
:
1393 case ISO15693_CMD_WRITE_AFI
:
1394 case ISO15693_CMD_LOCK_AFI
:
1395 case ISO15693_CMD_WRITE_DSFID
:
1396 case ISO15693_CMD_LOCK_DSFID
:
1404 static int trf7970a_per_cmd_config(struct trf7970a
*trf
, struct sk_buff
*skb
)
1406 u8
*req
= skb
->data
;
1407 u8 special_fcn_reg1
, iso_ctrl
;
1410 trf
->issue_eof
= false;
1412 /* When issuing Type 2 read command, make sure the '4_bit_RX' bit in
1413 * special functions register 1 is cleared; otherwise, its a write or
1414 * sector select command and '4_bit_RX' must be set.
1416 * When issuing an ISO 15693 command, inspect the flags byte to see
1417 * what speed to use. Also, remember if the OPTION flag is set on
1418 * a Type 5 write or lock command so the driver will know that it
1419 * has to send an EOF in order to get a response.
1421 if ((trf
->technology
== NFC_DIGITAL_RF_TECH_106A
) &&
1422 (trf
->framing
== NFC_DIGITAL_FRAMING_NFCA_T2T
)) {
1423 if (req
[0] == NFC_T2T_CMD_READ
)
1424 special_fcn_reg1
= 0;
1426 special_fcn_reg1
= TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX
;
1428 if (special_fcn_reg1
!= trf
->special_fcn_reg1
) {
1429 ret
= trf7970a_write(trf
, TRF7970A_SPECIAL_FCN_REG1
,
1434 trf
->special_fcn_reg1
= special_fcn_reg1
;
1436 } else if (trf
->technology
== NFC_DIGITAL_RF_TECH_ISO15693
) {
1437 iso_ctrl
= trf
->iso_ctrl
& ~TRF7970A_ISO_CTRL_RFID_SPEED_MASK
;
1439 switch (req
[0] & ISO15693_REQ_FLAG_SPEED_MASK
) {
1441 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_SGL_1OF4_662
;
1443 case ISO15693_REQ_FLAG_SUB_CARRIER
:
1444 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a
;
1446 case ISO15693_REQ_FLAG_DATA_RATE
:
1447 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648
;
1449 case (ISO15693_REQ_FLAG_SUB_CARRIER
|
1450 ISO15693_REQ_FLAG_DATA_RATE
):
1451 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669
;
1455 if (iso_ctrl
!= trf
->iso_ctrl
) {
1456 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
, iso_ctrl
);
1460 trf
->iso_ctrl
= iso_ctrl
;
1463 if (trf
->framing
== NFC_DIGITAL_FRAMING_ISO15693_T5T
) {
1464 if (trf7970a_is_iso15693_write_or_lock(req
[1]) &&
1465 (req
[0] & ISO15693_REQ_FLAG_OPTION
))
1466 trf
->issue_eof
= true;
1467 else if ((trf
->quirks
&
1468 TRF7970A_QUIRK_T5T_RMB_EXTRA_BYTE
) &&
1469 (req
[1] == ISO15693_CMD_READ_MULTIPLE_BLOCK
))
1470 trf
->adjust_resp_len
= true;
1477 static int trf7970a_send_cmd(struct nfc_digital_dev
*ddev
,
1478 struct sk_buff
*skb
, u16 timeout
,
1479 nfc_digital_cmd_complete_t cb
, void *arg
)
1481 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1487 dev_dbg(trf
->dev
, "New request - state: %d, timeout: %d ms, len: %d\n",
1488 trf
->state
, timeout
, skb
->len
);
1490 if (skb
->len
> TRF7970A_TX_MAX
)
1493 mutex_lock(&trf
->lock
);
1495 if ((trf
->state
!= TRF7970A_ST_IDLE
) &&
1496 (trf
->state
!= TRF7970A_ST_IDLE_RX_BLOCKED
)) {
1497 dev_err(trf
->dev
, "%s - Bogus state: %d\n", __func__
,
1503 if (trf
->aborting
) {
1504 dev_dbg(trf
->dev
, "Abort process complete\n");
1505 trf
->aborting
= false;
1511 trf
->rx_skb
= nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE
,
1514 dev_dbg(trf
->dev
, "Can't alloc rx_skb\n");
1520 if (trf
->state
== TRF7970A_ST_IDLE_RX_BLOCKED
) {
1521 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_ENABLE_RX
);
1525 trf
->state
= TRF7970A_ST_IDLE
;
1528 if (trf
->is_initiator
) {
1529 ret
= trf7970a_per_cmd_config(trf
, skb
);
1538 trf
->timeout
= timeout
;
1539 trf
->ignore_timeout
= false;
1543 /* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
1544 * on what the current framing is, the address of the TX length byte 1
1545 * register (0x1d), and the 2 byte length of the data to be transmitted.
1546 * That totals 5 bytes.
1548 prefix
[0] = TRF7970A_CMD_BIT_CTRL
|
1549 TRF7970A_CMD_BIT_OPCODE(TRF7970A_CMD_FIFO_RESET
);
1550 prefix
[1] = TRF7970A_CMD_BIT_CTRL
|
1551 TRF7970A_CMD_BIT_OPCODE(trf
->tx_cmd
);
1552 prefix
[2] = TRF7970A_CMD_BIT_CONTINUOUS
| TRF7970A_TX_LENGTH_BYTE1
;
1554 if (trf
->framing
== NFC_DIGITAL_FRAMING_NFCA_SHORT
) {
1556 prefix
[4] = 0x0f; /* 7 bits */
1558 prefix
[3] = (len
& 0xf00) >> 4;
1559 prefix
[3] |= ((len
& 0xf0) >> 4);
1560 prefix
[4] = ((len
& 0x0f) << 4);
1563 len
= min_t(int, skb
->len
, TRF7970A_FIFO_SIZE
);
1565 /* Clear possible spurious interrupt */
1566 ret
= trf7970a_read_irqstatus(trf
, &status
);
1570 ret
= trf7970a_transmit(trf
, skb
, len
, prefix
, sizeof(prefix
));
1572 kfree_skb(trf
->rx_skb
);
1577 mutex_unlock(&trf
->lock
);
1581 static int trf7970a_tg_config_rf_tech(struct trf7970a
*trf
, int tech
)
1585 dev_dbg(trf
->dev
, "rf technology: %d\n", tech
);
1588 case NFC_DIGITAL_RF_TECH_106A
:
1589 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE
|
1590 TRF7970A_ISO_CTRL_NFC_CE
|
1591 TRF7970A_ISO_CTRL_NFC_CE_14443A
;
1592 trf
->modulator_sys_clk_ctrl
=
1593 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1594 TRF7970A_MODULATOR_DEPTH_OOK
;
1596 case NFC_DIGITAL_RF_TECH_212F
:
1597 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE
|
1598 TRF7970A_ISO_CTRL_NFC_NFCF_212
;
1599 trf
->modulator_sys_clk_ctrl
=
1600 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1601 TRF7970A_MODULATOR_DEPTH_ASK10
;
1603 case NFC_DIGITAL_RF_TECH_424F
:
1604 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE
|
1605 TRF7970A_ISO_CTRL_NFC_NFCF_424
;
1606 trf
->modulator_sys_clk_ctrl
=
1607 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1608 TRF7970A_MODULATOR_DEPTH_ASK10
;
1611 dev_dbg(trf
->dev
, "Unsupported rf technology: %d\n", tech
);
1615 trf
->technology
= tech
;
1617 /* Normally we write the ISO_CTRL register in
1618 * trf7970a_tg_config_framing() because the framing can change
1619 * the value written. However, when sending a PSL RES,
1620 * digital_tg_send_psl_res_complete() doesn't call
1621 * trf7970a_tg_config_framing() so we must write the register
1624 if ((trf
->framing
== NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED
) &&
1625 (trf
->iso_ctrl_tech
!= trf
->iso_ctrl
)) {
1626 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
,
1627 trf
->iso_ctrl_tech
);
1629 trf
->iso_ctrl
= trf
->iso_ctrl_tech
;
1635 /* Since this is a target routine, several of the framing calls are
1636 * made between receiving the request and sending the response so they
1637 * should take effect until after the response is sent. This is accomplished
1638 * by skipping the ISO_CTRL register write here and doing it in the interrupt
1641 static int trf7970a_tg_config_framing(struct trf7970a
*trf
, int framing
)
1643 u8 iso_ctrl
= trf
->iso_ctrl_tech
;
1646 dev_dbg(trf
->dev
, "framing: %d\n", framing
);
1649 case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP
:
1650 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT_NO_CRC
;
1651 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
1653 case NFC_DIGITAL_FRAMING_NFCA_STANDARD
:
1654 case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A
:
1655 case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE
:
1656 /* These ones are applied in the interrupt handler */
1657 iso_ctrl
= trf
->iso_ctrl
; /* Don't write to ISO_CTRL yet */
1659 case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP
:
1660 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1661 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
1663 case NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED
:
1664 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1665 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
1668 dev_dbg(trf
->dev
, "Unsupported Framing: %d\n", framing
);
1672 trf
->framing
= framing
;
1674 if (iso_ctrl
!= trf
->iso_ctrl
) {
1675 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
, iso_ctrl
);
1679 trf
->iso_ctrl
= iso_ctrl
;
1681 ret
= trf7970a_write(trf
, TRF7970A_MODULATOR_SYS_CLK_CTRL
,
1682 trf
->modulator_sys_clk_ctrl
);
1687 if (!(trf
->chip_status_ctrl
& TRF7970A_CHIP_STATUS_RF_ON
)) {
1688 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1689 trf
->chip_status_ctrl
|
1690 TRF7970A_CHIP_STATUS_RF_ON
);
1694 trf
->chip_status_ctrl
|= TRF7970A_CHIP_STATUS_RF_ON
;
1700 static int trf7970a_tg_configure_hw(struct nfc_digital_dev
*ddev
, int type
,
1703 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1706 dev_dbg(trf
->dev
, "Configure hw - type: %d, param: %d\n", type
, param
);
1708 mutex_lock(&trf
->lock
);
1710 trf
->is_initiator
= false;
1712 if ((trf
->state
== TRF7970A_ST_PWR_OFF
) ||
1713 (trf
->state
== TRF7970A_ST_RF_OFF
)) {
1714 ret
= trf7970a_switch_rf_on(trf
);
1720 case NFC_DIGITAL_CONFIG_RF_TECH
:
1721 ret
= trf7970a_tg_config_rf_tech(trf
, param
);
1723 case NFC_DIGITAL_CONFIG_FRAMING
:
1724 ret
= trf7970a_tg_config_framing(trf
, param
);
1727 dev_dbg(trf
->dev
, "Unknown type: %d\n", type
);
1732 mutex_unlock(&trf
->lock
);
1736 static int _trf7970a_tg_listen(struct nfc_digital_dev
*ddev
, u16 timeout
,
1737 nfc_digital_cmd_complete_t cb
, void *arg
, bool mode_detect
)
1739 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1742 mutex_lock(&trf
->lock
);
1744 if ((trf
->state
!= TRF7970A_ST_IDLE
) &&
1745 (trf
->state
!= TRF7970A_ST_IDLE_RX_BLOCKED
)) {
1746 dev_err(trf
->dev
, "%s - Bogus state: %d\n", __func__
,
1752 if (trf
->aborting
) {
1753 dev_dbg(trf
->dev
, "Abort process complete\n");
1754 trf
->aborting
= false;
1759 trf
->rx_skb
= nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE
,
1762 dev_dbg(trf
->dev
, "Can't alloc rx_skb\n");
1767 ret
= trf7970a_write(trf
, TRF7970A_RX_SPECIAL_SETTINGS
,
1768 TRF7970A_RX_SPECIAL_SETTINGS_HBT
|
1769 TRF7970A_RX_SPECIAL_SETTINGS_M848
|
1770 TRF7970A_RX_SPECIAL_SETTINGS_C424
|
1771 TRF7970A_RX_SPECIAL_SETTINGS_C212
);
1775 ret
= trf7970a_write(trf
, TRF7970A_REG_IO_CTRL
,
1776 trf
->io_ctrl
| TRF7970A_REG_IO_CTRL_VRS(0x1));
1780 ret
= trf7970a_write(trf
, TRF7970A_NFC_LOW_FIELD_LEVEL
,
1781 TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(0x3));
1785 ret
= trf7970a_write(trf
, TRF7970A_NFC_TARGET_LEVEL
,
1786 TRF7970A_NFC_TARGET_LEVEL_RFDET(0x7));
1793 trf
->timeout
= timeout
;
1794 trf
->ignore_timeout
= false;
1796 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_ENABLE_RX
);
1800 trf
->state
= mode_detect
? TRF7970A_ST_LISTENING_MD
:
1801 TRF7970A_ST_LISTENING
;
1803 schedule_delayed_work(&trf
->timeout_work
, msecs_to_jiffies(timeout
));
1806 mutex_unlock(&trf
->lock
);
1810 static int trf7970a_tg_listen(struct nfc_digital_dev
*ddev
, u16 timeout
,
1811 nfc_digital_cmd_complete_t cb
, void *arg
)
1813 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1815 dev_dbg(trf
->dev
, "Listen - state: %d, timeout: %d ms\n",
1816 trf
->state
, timeout
);
1818 return _trf7970a_tg_listen(ddev
, timeout
, cb
, arg
, false);
1821 static int trf7970a_tg_listen_md(struct nfc_digital_dev
*ddev
,
1822 u16 timeout
, nfc_digital_cmd_complete_t cb
, void *arg
)
1824 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1827 dev_dbg(trf
->dev
, "Listen MD - state: %d, timeout: %d ms\n",
1828 trf
->state
, timeout
);
1830 ret
= trf7970a_tg_configure_hw(ddev
, NFC_DIGITAL_CONFIG_RF_TECH
,
1831 NFC_DIGITAL_RF_TECH_106A
);
1835 ret
= trf7970a_tg_configure_hw(ddev
, NFC_DIGITAL_CONFIG_FRAMING
,
1836 NFC_DIGITAL_FRAMING_NFCA_NFC_DEP
);
1840 return _trf7970a_tg_listen(ddev
, timeout
, cb
, arg
, true);
1843 static int trf7970a_tg_get_rf_tech(struct nfc_digital_dev
*ddev
, u8
*rf_tech
)
1845 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1847 dev_dbg(trf
->dev
, "Get RF Tech - state: %d, rf_tech: %d\n",
1848 trf
->state
, trf
->md_rf_tech
);
1850 *rf_tech
= trf
->md_rf_tech
;
1855 static void trf7970a_abort_cmd(struct nfc_digital_dev
*ddev
)
1857 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1859 dev_dbg(trf
->dev
, "Abort process initiated\n");
1861 mutex_lock(&trf
->lock
);
1863 switch (trf
->state
) {
1864 case TRF7970A_ST_WAIT_FOR_TX_FIFO
:
1865 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
1866 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
1867 case TRF7970A_ST_WAIT_TO_ISSUE_EOF
:
1868 trf
->aborting
= true;
1870 case TRF7970A_ST_LISTENING
:
1871 trf
->ignore_timeout
= !cancel_delayed_work(&trf
->timeout_work
);
1872 trf7970a_send_err_upstream(trf
, -ECANCELED
);
1873 dev_dbg(trf
->dev
, "Abort process complete\n");
1879 mutex_unlock(&trf
->lock
);
1882 static struct nfc_digital_ops trf7970a_nfc_ops
= {
1883 .in_configure_hw
= trf7970a_in_configure_hw
,
1884 .in_send_cmd
= trf7970a_send_cmd
,
1885 .tg_configure_hw
= trf7970a_tg_configure_hw
,
1886 .tg_send_cmd
= trf7970a_send_cmd
,
1887 .tg_listen
= trf7970a_tg_listen
,
1888 .tg_listen_md
= trf7970a_tg_listen_md
,
1889 .tg_get_rf_tech
= trf7970a_tg_get_rf_tech
,
1890 .switch_rf
= trf7970a_switch_rf
,
1891 .abort_cmd
= trf7970a_abort_cmd
,
1894 static int trf7970a_power_up(struct trf7970a
*trf
)
1898 dev_dbg(trf
->dev
, "Powering up - state: %d\n", trf
->state
);
1900 if (trf
->state
!= TRF7970A_ST_PWR_OFF
)
1903 ret
= regulator_enable(trf
->regulator
);
1905 dev_err(trf
->dev
, "%s - Can't enable VIN: %d\n", __func__
, ret
);
1909 usleep_range(5000, 6000);
1911 if (!(trf
->quirks
& TRF7970A_QUIRK_EN2_MUST_STAY_LOW
)) {
1912 if (gpio_is_valid(trf
->en2_gpio
)) {
1913 gpio_set_value(trf
->en2_gpio
, 1);
1914 usleep_range(1000, 2000);
1918 gpio_set_value(trf
->en_gpio
, 1);
1920 usleep_range(20000, 21000);
1922 trf
->state
= TRF7970A_ST_RF_OFF
;
1927 static int trf7970a_power_down(struct trf7970a
*trf
)
1931 dev_dbg(trf
->dev
, "Powering down - state: %d\n", trf
->state
);
1933 if (trf
->state
== TRF7970A_ST_PWR_OFF
)
1936 if (trf
->state
!= TRF7970A_ST_RF_OFF
) {
1937 dev_dbg(trf
->dev
, "Can't power down - not RF_OFF state (%d)\n",
1942 gpio_set_value(trf
->en_gpio
, 0);
1943 if (gpio_is_valid(trf
->en2_gpio
))
1944 gpio_set_value(trf
->en2_gpio
, 0);
1946 ret
= regulator_disable(trf
->regulator
);
1948 dev_err(trf
->dev
, "%s - Can't disable VIN: %d\n", __func__
,
1951 trf
->state
= TRF7970A_ST_PWR_OFF
;
1956 static int trf7970a_startup(struct trf7970a
*trf
)
1960 ret
= trf7970a_power_up(trf
);
1964 pm_runtime_set_active(trf
->dev
);
1965 pm_runtime_enable(trf
->dev
);
1966 pm_runtime_mark_last_busy(trf
->dev
);
1971 static void trf7970a_shutdown(struct trf7970a
*trf
)
1973 switch (trf
->state
) {
1974 case TRF7970A_ST_WAIT_FOR_TX_FIFO
:
1975 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
1976 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
1977 case TRF7970A_ST_WAIT_TO_ISSUE_EOF
:
1978 case TRF7970A_ST_LISTENING
:
1979 trf7970a_send_err_upstream(trf
, -ECANCELED
);
1981 case TRF7970A_ST_IDLE
:
1982 case TRF7970A_ST_IDLE_RX_BLOCKED
:
1983 trf7970a_switch_rf_off(trf
);
1989 pm_runtime_disable(trf
->dev
);
1990 pm_runtime_set_suspended(trf
->dev
);
1992 trf7970a_power_down(trf
);
1995 static int trf7970a_get_autosuspend_delay(struct device_node
*np
)
1997 int autosuspend_delay
, ret
;
1999 ret
= of_property_read_u32(np
, "autosuspend-delay", &autosuspend_delay
);
2001 autosuspend_delay
= TRF7970A_AUTOSUSPEND_DELAY
;
2003 return autosuspend_delay
;
2006 static int trf7970a_get_vin_voltage_override(struct device_node
*np
,
2009 return of_property_read_u32(np
, "vin-voltage-override", vin_uvolts
);
2012 static int trf7970a_probe(struct spi_device
*spi
)
2014 struct device_node
*np
= spi
->dev
.of_node
;
2015 struct trf7970a
*trf
;
2016 int uvolts
, autosuspend_delay
, ret
;
2017 u32 clk_freq
= TRF7970A_13MHZ_CLOCK_FREQUENCY
;
2020 dev_err(&spi
->dev
, "No Device Tree entry\n");
2024 trf
= devm_kzalloc(&spi
->dev
, sizeof(*trf
), GFP_KERNEL
);
2028 trf
->state
= TRF7970A_ST_PWR_OFF
;
2029 trf
->dev
= &spi
->dev
;
2032 spi
->mode
= SPI_MODE_1
;
2033 spi
->bits_per_word
= 8;
2035 ret
= spi_setup(spi
);
2037 dev_err(trf
->dev
, "Can't set up SPI Communication\n");
2041 if (of_property_read_bool(np
, "t5t-rmb-extra-byte-quirk"))
2042 trf
->quirks
|= TRF7970A_QUIRK_T5T_RMB_EXTRA_BYTE
;
2044 if (of_property_read_bool(np
, "irq-status-read-quirk"))
2045 trf
->quirks
|= TRF7970A_QUIRK_IRQ_STATUS_READ
;
2047 /* There are two enable pins - both must be present */
2048 trf
->en_gpio
= of_get_named_gpio(np
, "ti,enable-gpios", 0);
2049 if (!gpio_is_valid(trf
->en_gpio
)) {
2050 dev_err(trf
->dev
, "No EN GPIO property\n");
2051 return trf
->en_gpio
;
2054 ret
= devm_gpio_request_one(trf
->dev
, trf
->en_gpio
,
2055 GPIOF_DIR_OUT
| GPIOF_INIT_LOW
, "trf7970a EN");
2057 dev_err(trf
->dev
, "Can't request EN GPIO: %d\n", ret
);
2061 trf
->en2_gpio
= of_get_named_gpio(np
, "ti,enable-gpios", 1);
2062 if (!gpio_is_valid(trf
->en2_gpio
)) {
2063 dev_info(trf
->dev
, "No EN2 GPIO property\n");
2065 ret
= devm_gpio_request_one(trf
->dev
, trf
->en2_gpio
,
2066 GPIOF_DIR_OUT
| GPIOF_INIT_LOW
, "trf7970a EN2");
2068 dev_err(trf
->dev
, "Can't request EN2 GPIO: %d\n", ret
);
2073 of_property_read_u32(np
, "clock-frequency", &clk_freq
);
2074 if ((clk_freq
!= TRF7970A_27MHZ_CLOCK_FREQUENCY
) ||
2075 (clk_freq
!= TRF7970A_13MHZ_CLOCK_FREQUENCY
)) {
2077 "clock-frequency (%u Hz) unsupported\n",
2082 if (of_property_read_bool(np
, "en2-rf-quirk"))
2083 trf
->quirks
|= TRF7970A_QUIRK_EN2_MUST_STAY_LOW
;
2085 ret
= devm_request_threaded_irq(trf
->dev
, spi
->irq
, NULL
,
2086 trf7970a_irq
, IRQF_TRIGGER_RISING
| IRQF_ONESHOT
,
2089 dev_err(trf
->dev
, "Can't request IRQ#%d: %d\n", spi
->irq
, ret
);
2093 mutex_init(&trf
->lock
);
2094 INIT_DELAYED_WORK(&trf
->timeout_work
, trf7970a_timeout_work_handler
);
2096 trf
->regulator
= devm_regulator_get(&spi
->dev
, "vin");
2097 if (IS_ERR(trf
->regulator
)) {
2098 ret
= PTR_ERR(trf
->regulator
);
2099 dev_err(trf
->dev
, "Can't get VIN regulator: %d\n", ret
);
2100 goto err_destroy_lock
;
2103 ret
= regulator_enable(trf
->regulator
);
2105 dev_err(trf
->dev
, "Can't enable VIN: %d\n", ret
);
2106 goto err_destroy_lock
;
2109 ret
= trf7970a_get_vin_voltage_override(np
, &uvolts
);
2111 uvolts
= regulator_get_voltage(trf
->regulator
);
2113 if (uvolts
> 4000000)
2114 trf
->chip_status_ctrl
= TRF7970A_CHIP_STATUS_VRS5_3
;
2116 trf
->regulator
= devm_regulator_get(&spi
->dev
, "vdd-io");
2117 if (IS_ERR(trf
->regulator
)) {
2118 ret
= PTR_ERR(trf
->regulator
);
2119 dev_err(trf
->dev
, "Can't get VDD_IO regulator: %d\n", ret
);
2120 goto err_destroy_lock
;
2123 ret
= regulator_enable(trf
->regulator
);
2125 dev_err(trf
->dev
, "Can't enable VDD_IO: %d\n", ret
);
2126 goto err_destroy_lock
;
2129 if (regulator_get_voltage(trf
->regulator
) == 1800000) {
2130 trf
->io_ctrl
= TRF7970A_REG_IO_CTRL_IO_LOW
;
2131 dev_dbg(trf
->dev
, "trf7970a config vdd_io to 1.8V\n");
2134 trf
->ddev
= nfc_digital_allocate_device(&trf7970a_nfc_ops
,
2135 TRF7970A_SUPPORTED_PROTOCOLS
,
2136 NFC_DIGITAL_DRV_CAPS_IN_CRC
|
2137 NFC_DIGITAL_DRV_CAPS_TG_CRC
, 0, 0);
2139 dev_err(trf
->dev
, "Can't allocate NFC digital device\n");
2141 goto err_disable_regulator
;
2144 nfc_digital_set_parent_dev(trf
->ddev
, trf
->dev
);
2145 nfc_digital_set_drvdata(trf
->ddev
, trf
);
2146 spi_set_drvdata(spi
, trf
);
2148 autosuspend_delay
= trf7970a_get_autosuspend_delay(np
);
2150 pm_runtime_set_autosuspend_delay(trf
->dev
, autosuspend_delay
);
2151 pm_runtime_use_autosuspend(trf
->dev
);
2153 ret
= trf7970a_startup(trf
);
2157 ret
= nfc_digital_register_device(trf
->ddev
);
2159 dev_err(trf
->dev
, "Can't register NFC digital device: %d\n",
2167 trf7970a_shutdown(trf
);
2169 nfc_digital_free_device(trf
->ddev
);
2170 err_disable_regulator
:
2171 regulator_disable(trf
->regulator
);
2173 mutex_destroy(&trf
->lock
);
2177 static int trf7970a_remove(struct spi_device
*spi
)
2179 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2181 mutex_lock(&trf
->lock
);
2183 trf7970a_shutdown(trf
);
2185 mutex_unlock(&trf
->lock
);
2187 nfc_digital_unregister_device(trf
->ddev
);
2188 nfc_digital_free_device(trf
->ddev
);
2190 regulator_disable(trf
->regulator
);
2192 mutex_destroy(&trf
->lock
);
2197 #ifdef CONFIG_PM_SLEEP
2198 static int trf7970a_suspend(struct device
*dev
)
2200 struct spi_device
*spi
= to_spi_device(dev
);
2201 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2203 dev_dbg(dev
, "Suspend\n");
2205 mutex_lock(&trf
->lock
);
2207 trf7970a_shutdown(trf
);
2209 mutex_unlock(&trf
->lock
);
2214 static int trf7970a_resume(struct device
*dev
)
2216 struct spi_device
*spi
= to_spi_device(dev
);
2217 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2220 dev_dbg(dev
, "Resume\n");
2222 mutex_lock(&trf
->lock
);
2224 ret
= trf7970a_startup(trf
);
2226 mutex_unlock(&trf
->lock
);
2233 static int trf7970a_pm_runtime_suspend(struct device
*dev
)
2235 struct spi_device
*spi
= to_spi_device(dev
);
2236 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2239 dev_dbg(dev
, "Runtime suspend\n");
2241 mutex_lock(&trf
->lock
);
2243 ret
= trf7970a_power_down(trf
);
2245 mutex_unlock(&trf
->lock
);
2250 static int trf7970a_pm_runtime_resume(struct device
*dev
)
2252 struct spi_device
*spi
= to_spi_device(dev
);
2253 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2256 dev_dbg(dev
, "Runtime resume\n");
2258 ret
= trf7970a_power_up(trf
);
2260 pm_runtime_mark_last_busy(dev
);
2266 static const struct dev_pm_ops trf7970a_pm_ops
= {
2267 SET_SYSTEM_SLEEP_PM_OPS(trf7970a_suspend
, trf7970a_resume
)
2268 SET_RUNTIME_PM_OPS(trf7970a_pm_runtime_suspend
,
2269 trf7970a_pm_runtime_resume
, NULL
)
2272 static const struct of_device_id trf7970a_of_match
[] = {
2273 { .compatible
= "ti,trf7970a", },
2276 MODULE_DEVICE_TABLE(of
, trf7970a_of_match
);
2278 static const struct spi_device_id trf7970a_id_table
[] = {
2282 MODULE_DEVICE_TABLE(spi
, trf7970a_id_table
);
2284 static struct spi_driver trf7970a_spi_driver
= {
2285 .probe
= trf7970a_probe
,
2286 .remove
= trf7970a_remove
,
2287 .id_table
= trf7970a_id_table
,
2290 .of_match_table
= of_match_ptr(trf7970a_of_match
),
2291 .pm
= &trf7970a_pm_ops
,
2295 module_spi_driver(trf7970a_spi_driver
);
2297 MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
2298 MODULE_LICENSE("GPL v2");
2299 MODULE_DESCRIPTION("TI trf7970a RFID/NFC Transceiver Driver");