rcu: Maintain special bits at bottom of ->dynticks counter
[linux/fpc-iii.git] / drivers / ide / cs5536.c
blobde9185db41d4e2fa786eb28618e38cccece73628
1 /*
2 * CS5536 PATA support
3 * (C) 2007 Martin K. Petersen <mkp@mkp.net>
4 * (C) 2009 Bartlomiej Zolnierkiewicz
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 * Documentation:
20 * Available from AMD web site.
22 * The IDE timing registers for the CS5536 live in the Geode Machine
23 * Specific Register file and not PCI config space. Most BIOSes
24 * virtualize the PCI registers so the chip looks like a standard IDE
25 * controller. Unfortunately not all implementations get this right.
26 * In particular some have problems with unaligned accesses to the
27 * virtualized PCI registers. This driver always does full dword
28 * writes to work around the issue. Also, in case of a bad BIOS this
29 * driver can be loaded with the "msr=1" parameter which forces using
30 * the Machine Specific Registers to configure the device.
33 #include <linux/kernel.h>
34 #include <linux/module.h>
35 #include <linux/pci.h>
36 #include <linux/init.h>
37 #include <linux/ide.h>
38 #include <asm/msr.h>
40 #define DRV_NAME "cs5536"
42 enum {
43 MSR_IDE_CFG = 0x51300010,
44 PCI_IDE_CFG = 0x40,
46 CFG = 0,
47 DTC = 2,
48 CAST = 3,
49 ETC = 4,
51 IDE_CFG_CHANEN = (1 << 1),
52 IDE_CFG_CABLE = (1 << 17) | (1 << 16),
54 IDE_D0_SHIFT = 24,
55 IDE_D1_SHIFT = 16,
56 IDE_DRV_MASK = 0xff,
58 IDE_CAST_D0_SHIFT = 6,
59 IDE_CAST_D1_SHIFT = 4,
60 IDE_CAST_DRV_MASK = 0x3,
62 IDE_CAST_CMD_SHIFT = 24,
63 IDE_CAST_CMD_MASK = 0xff,
65 IDE_ETC_UDMA_MASK = 0xc0,
68 static int use_msr;
70 static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
72 if (unlikely(use_msr)) {
73 u32 dummy;
75 rdmsr(MSR_IDE_CFG + reg, *val, dummy);
76 return 0;
79 return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
82 static int cs5536_write(struct pci_dev *pdev, int reg, int val)
84 if (unlikely(use_msr)) {
85 wrmsr(MSR_IDE_CFG + reg, val, 0);
86 return 0;
89 return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
92 static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
94 struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
95 int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
96 u32 dtc;
98 cs5536_read(pdev, DTC, &dtc);
99 dtc &= ~(IDE_DRV_MASK << dshift);
100 dtc |= tim << dshift;
101 cs5536_write(pdev, DTC, dtc);
105 * cs5536_cable_detect - detect cable type
106 * @hwif: Port to detect on
108 * Perform cable detection for ATA66 capable cable.
110 * Returns a cable type.
113 static u8 cs5536_cable_detect(ide_hwif_t *hwif)
115 struct pci_dev *pdev = to_pci_dev(hwif->dev);
116 u32 cfg;
118 cs5536_read(pdev, CFG, &cfg);
120 if (cfg & IDE_CFG_CABLE)
121 return ATA_CBL_PATA80;
122 else
123 return ATA_CBL_PATA40;
127 * cs5536_set_pio_mode - PIO timing setup
128 * @hwif: ATA port
129 * @drive: ATA device
132 static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
134 static const u8 drv_timings[5] = {
135 0x98, 0x55, 0x32, 0x21, 0x20,
138 static const u8 addr_timings[5] = {
139 0x2, 0x1, 0x0, 0x0, 0x0,
142 static const u8 cmd_timings[5] = {
143 0x99, 0x92, 0x90, 0x22, 0x20,
146 struct pci_dev *pdev = to_pci_dev(hwif->dev);
147 ide_drive_t *pair = ide_get_pair_dev(drive);
148 int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
149 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
150 u32 cast;
151 const u8 pio = drive->pio_mode - XFER_PIO_0;
152 u8 cmd_pio = pio;
154 if (pair)
155 cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0);
157 timings &= (IDE_DRV_MASK << 8);
158 timings |= drv_timings[pio];
159 ide_set_drivedata(drive, (void *)timings);
161 cs5536_program_dtc(drive, drv_timings[pio]);
163 cs5536_read(pdev, CAST, &cast);
165 cast &= ~(IDE_CAST_DRV_MASK << cshift);
166 cast |= addr_timings[pio] << cshift;
168 cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
169 cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
171 cs5536_write(pdev, CAST, cast);
175 * cs5536_set_dma_mode - DMA timing setup
176 * @hwif: ATA port
177 * @drive: ATA device
180 static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
182 static const u8 udma_timings[6] = {
183 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
186 static const u8 mwdma_timings[3] = {
187 0x67, 0x21, 0x20,
190 struct pci_dev *pdev = to_pci_dev(hwif->dev);
191 int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
192 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
193 u32 etc;
194 const u8 mode = drive->dma_mode;
196 cs5536_read(pdev, ETC, &etc);
198 if (mode >= XFER_UDMA_0) {
199 etc &= ~(IDE_DRV_MASK << dshift);
200 etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
201 } else { /* MWDMA */
202 etc &= ~(IDE_ETC_UDMA_MASK << dshift);
203 timings &= IDE_DRV_MASK;
204 timings |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
205 ide_set_drivedata(drive, (void *)timings);
208 cs5536_write(pdev, ETC, etc);
211 static void cs5536_dma_start(ide_drive_t *drive)
213 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
215 if (drive->current_speed < XFER_UDMA_0 &&
216 (timings >> 8) != (timings & IDE_DRV_MASK))
217 cs5536_program_dtc(drive, timings >> 8);
219 ide_dma_start(drive);
222 static int cs5536_dma_end(ide_drive_t *drive)
224 int ret = ide_dma_end(drive);
225 unsigned long timings = (unsigned long)ide_get_drivedata(drive);
227 if (drive->current_speed < XFER_UDMA_0 &&
228 (timings >> 8) != (timings & IDE_DRV_MASK))
229 cs5536_program_dtc(drive, timings & IDE_DRV_MASK);
231 return ret;
234 static const struct ide_port_ops cs5536_port_ops = {
235 .set_pio_mode = cs5536_set_pio_mode,
236 .set_dma_mode = cs5536_set_dma_mode,
237 .cable_detect = cs5536_cable_detect,
240 static const struct ide_dma_ops cs5536_dma_ops = {
241 .dma_host_set = ide_dma_host_set,
242 .dma_setup = ide_dma_setup,
243 .dma_start = cs5536_dma_start,
244 .dma_end = cs5536_dma_end,
245 .dma_test_irq = ide_dma_test_irq,
246 .dma_lost_irq = ide_dma_lost_irq,
247 .dma_timer_expiry = ide_dma_sff_timer_expiry,
248 .dma_sff_read_status = ide_dma_sff_read_status,
251 static const struct ide_port_info cs5536_info = {
252 .name = DRV_NAME,
253 .port_ops = &cs5536_port_ops,
254 .dma_ops = &cs5536_dma_ops,
255 .host_flags = IDE_HFLAG_SINGLE,
256 .pio_mask = ATA_PIO4,
257 .mwdma_mask = ATA_MWDMA2,
258 .udma_mask = ATA_UDMA5,
262 * cs5536_init_one
263 * @dev: PCI device
264 * @id: Entry in match table
267 static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
269 u32 cfg;
271 if (use_msr)
272 printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
274 cs5536_read(dev, CFG, &cfg);
276 if ((cfg & IDE_CFG_CHANEN) == 0) {
277 printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
278 return -ENODEV;
281 return ide_pci_init_one(dev, &cs5536_info, NULL);
284 static const struct pci_device_id cs5536_pci_tbl[] = {
285 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
286 { },
289 static struct pci_driver cs5536_pci_driver = {
290 .name = DRV_NAME,
291 .id_table = cs5536_pci_tbl,
292 .probe = cs5536_init_one,
293 .remove = ide_pci_remove,
294 .suspend = ide_pci_suspend,
295 .resume = ide_pci_resume,
298 module_pci_driver(cs5536_pci_driver);
300 MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
301 MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
302 MODULE_LICENSE("GPL");
303 MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
305 module_param_named(msr, use_msr, int, 0644);
306 MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");