2 * twl6040-vibra.c - TWL6040 Vibrator driver
4 * Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
5 * Author: Misael Lopez Cruz <misael.lopez@ti.com>
7 * Copyright: (C) 2011 Texas Instruments, Inc.
9 * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
10 * Felipe Balbi <felipe.balbi@nokia.com>
11 * Jari Vanhala <ext-javi.vanhala@nokia.com>
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
28 #include <linux/module.h>
29 #include <linux/platform_device.h>
31 #include <linux/workqueue.h>
32 #include <linux/input.h>
33 #include <linux/mfd/twl6040.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/regulator/consumer.h>
38 #define EFFECT_DIR_180_DEG 0x8000
40 /* Recommended modulation index 85% */
41 #define TWL6040_VIBRA_MOD 85
43 #define TWL6040_NUM_SUPPLIES 2
47 struct input_dev
*input_dev
;
48 struct work_struct play_work
;
57 unsigned int vibldrv_res
;
58 unsigned int vibrdrv_res
;
59 unsigned int viblmotor_res
;
60 unsigned int vibrmotor_res
;
62 struct regulator_bulk_data supplies
[TWL6040_NUM_SUPPLIES
];
64 struct twl6040
*twl6040
;
67 static irqreturn_t
twl6040_vib_irq_handler(int irq
, void *data
)
69 struct vibra_info
*info
= data
;
70 struct twl6040
*twl6040
= info
->twl6040
;
73 status
= twl6040_reg_read(twl6040
, TWL6040_REG_STATUS
);
74 if (status
& TWL6040_VIBLOCDET
) {
75 dev_warn(info
->dev
, "Left Vibrator overcurrent detected\n");
76 twl6040_clear_bits(twl6040
, TWL6040_REG_VIBCTLL
,
79 if (status
& TWL6040_VIBROCDET
) {
80 dev_warn(info
->dev
, "Right Vibrator overcurrent detected\n");
81 twl6040_clear_bits(twl6040
, TWL6040_REG_VIBCTLR
,
88 static void twl6040_vibra_enable(struct vibra_info
*info
)
90 struct twl6040
*twl6040
= info
->twl6040
;
93 ret
= regulator_bulk_enable(ARRAY_SIZE(info
->supplies
), info
->supplies
);
95 dev_err(info
->dev
, "failed to enable regulators %d\n", ret
);
99 twl6040_power(info
->twl6040
, 1);
100 if (twl6040_get_revid(twl6040
) <= TWL6040_REV_ES1_1
) {
102 * ERRATA: Disable overcurrent protection for at least
103 * 3ms when enabling vibrator drivers to avoid false
104 * overcurrent detection
106 twl6040_reg_write(twl6040
, TWL6040_REG_VIBCTLL
,
107 TWL6040_VIBENA
| TWL6040_VIBCTRL
);
108 twl6040_reg_write(twl6040
, TWL6040_REG_VIBCTLR
,
109 TWL6040_VIBENA
| TWL6040_VIBCTRL
);
110 usleep_range(3000, 3500);
113 twl6040_reg_write(twl6040
, TWL6040_REG_VIBCTLL
,
115 twl6040_reg_write(twl6040
, TWL6040_REG_VIBCTLR
,
118 info
->enabled
= true;
121 static void twl6040_vibra_disable(struct vibra_info
*info
)
123 struct twl6040
*twl6040
= info
->twl6040
;
125 twl6040_reg_write(twl6040
, TWL6040_REG_VIBCTLL
, 0x00);
126 twl6040_reg_write(twl6040
, TWL6040_REG_VIBCTLR
, 0x00);
127 twl6040_power(info
->twl6040
, 0);
129 regulator_bulk_disable(ARRAY_SIZE(info
->supplies
), info
->supplies
);
131 info
->enabled
= false;
134 static u8
twl6040_vibra_code(int vddvib
, int vibdrv_res
, int motor_res
,
135 int speed
, int direction
)
141 vpk
= (vddvib
* motor_res
* TWL6040_VIBRA_MOD
) /
142 (100 * (vibdrv_res
+ motor_res
));
144 /* 50mV per VIBDAT code step */
146 if (max_code
> TWL6040_VIBDAT_MAX
)
147 max_code
= TWL6040_VIBDAT_MAX
;
149 /* scale speed to max allowed code */
150 vibdat
= (u8
)((speed
* max_code
) / USHRT_MAX
);
152 /* 2's complement for direction > 180 degrees */
158 static void twl6040_vibra_set_effect(struct vibra_info
*info
)
160 struct twl6040
*twl6040
= info
->twl6040
;
165 volt
= regulator_get_voltage(info
->supplies
[0].consumer
) / 1000;
166 vibdatl
= twl6040_vibra_code(volt
, info
->vibldrv_res
,
168 info
->weak_speed
, info
->direction
);
171 volt
= regulator_get_voltage(info
->supplies
[1].consumer
) / 1000;
172 vibdatr
= twl6040_vibra_code(volt
, info
->vibrdrv_res
,
174 info
->strong_speed
, info
->direction
);
176 twl6040_reg_write(twl6040
, TWL6040_REG_VIBDATL
, vibdatl
);
177 twl6040_reg_write(twl6040
, TWL6040_REG_VIBDATR
, vibdatr
);
180 static void vibra_play_work(struct work_struct
*work
)
182 struct vibra_info
*info
= container_of(work
,
183 struct vibra_info
, play_work
);
186 /* Do not allow effect, while the routing is set to use audio */
187 ret
= twl6040_get_vibralr_status(info
->twl6040
);
188 if (ret
& TWL6040_VIBSEL
) {
189 dev_info(info
->dev
, "Vibra is configured for audio\n");
193 if (info
->weak_speed
|| info
->strong_speed
) {
195 twl6040_vibra_enable(info
);
197 twl6040_vibra_set_effect(info
);
198 } else if (info
->enabled
)
199 twl6040_vibra_disable(info
);
203 static int vibra_play(struct input_dev
*input
, void *data
,
204 struct ff_effect
*effect
)
206 struct vibra_info
*info
= input_get_drvdata(input
);
208 info
->weak_speed
= effect
->u
.rumble
.weak_magnitude
;
209 info
->strong_speed
= effect
->u
.rumble
.strong_magnitude
;
210 info
->direction
= effect
->direction
< EFFECT_DIR_180_DEG
? 1 : -1;
212 schedule_work(&info
->play_work
);
217 static void twl6040_vibra_close(struct input_dev
*input
)
219 struct vibra_info
*info
= input_get_drvdata(input
);
221 cancel_work_sync(&info
->play_work
);
224 twl6040_vibra_disable(info
);
227 static int __maybe_unused
twl6040_vibra_suspend(struct device
*dev
)
229 struct platform_device
*pdev
= to_platform_device(dev
);
230 struct vibra_info
*info
= platform_get_drvdata(pdev
);
232 cancel_work_sync(&info
->play_work
);
235 twl6040_vibra_disable(info
);
240 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops
, twl6040_vibra_suspend
, NULL
);
242 static int twl6040_vibra_probe(struct platform_device
*pdev
)
244 struct device
*twl6040_core_dev
= pdev
->dev
.parent
;
245 struct device_node
*twl6040_core_node
;
246 struct vibra_info
*info
;
251 of_node_get(twl6040_core_dev
->of_node
);
252 twl6040_core_node
= of_find_node_by_name(twl6040_core_dev
->of_node
,
254 if (!twl6040_core_node
) {
255 dev_err(&pdev
->dev
, "parent of node is missing?\n");
259 info
= devm_kzalloc(&pdev
->dev
, sizeof(*info
), GFP_KERNEL
);
261 of_node_put(twl6040_core_node
);
262 dev_err(&pdev
->dev
, "couldn't allocate memory\n");
266 info
->dev
= &pdev
->dev
;
268 info
->twl6040
= dev_get_drvdata(pdev
->dev
.parent
);
270 of_property_read_u32(twl6040_core_node
, "ti,vibldrv-res",
272 of_property_read_u32(twl6040_core_node
, "ti,vibrdrv-res",
274 of_property_read_u32(twl6040_core_node
, "ti,viblmotor-res",
275 &info
->viblmotor_res
);
276 of_property_read_u32(twl6040_core_node
, "ti,vibrmotor-res",
277 &info
->vibrmotor_res
);
278 of_property_read_u32(twl6040_core_node
, "ti,vddvibl-uV", &vddvibl_uV
);
279 of_property_read_u32(twl6040_core_node
, "ti,vddvibr-uV", &vddvibr_uV
);
281 of_node_put(twl6040_core_node
);
283 if ((!info
->vibldrv_res
&& !info
->viblmotor_res
) ||
284 (!info
->vibrdrv_res
&& !info
->vibrmotor_res
)) {
285 dev_err(info
->dev
, "invalid vibra driver/motor resistance\n");
289 info
->irq
= platform_get_irq(pdev
, 0);
291 dev_err(info
->dev
, "invalid irq\n");
295 error
= devm_request_threaded_irq(&pdev
->dev
, info
->irq
, NULL
,
296 twl6040_vib_irq_handler
,
298 "twl6040_irq_vib", info
);
300 dev_err(info
->dev
, "VIB IRQ request failed: %d\n", error
);
304 info
->supplies
[0].supply
= "vddvibl";
305 info
->supplies
[1].supply
= "vddvibr";
307 * When booted with Device tree the regulators are attached to the
308 * parent device (twl6040 MFD core)
310 error
= devm_regulator_bulk_get(twl6040_core_dev
,
311 ARRAY_SIZE(info
->supplies
),
314 dev_err(info
->dev
, "couldn't get regulators %d\n", error
);
319 error
= regulator_set_voltage(info
->supplies
[0].consumer
,
320 vddvibl_uV
, vddvibl_uV
);
322 dev_err(info
->dev
, "failed to set VDDVIBL volt %d\n",
329 error
= regulator_set_voltage(info
->supplies
[1].consumer
,
330 vddvibr_uV
, vddvibr_uV
);
332 dev_err(info
->dev
, "failed to set VDDVIBR volt %d\n",
338 INIT_WORK(&info
->play_work
, vibra_play_work
);
340 info
->input_dev
= devm_input_allocate_device(&pdev
->dev
);
341 if (!info
->input_dev
) {
342 dev_err(info
->dev
, "couldn't allocate input device\n");
346 input_set_drvdata(info
->input_dev
, info
);
348 info
->input_dev
->name
= "twl6040:vibrator";
349 info
->input_dev
->id
.version
= 1;
350 info
->input_dev
->close
= twl6040_vibra_close
;
351 __set_bit(FF_RUMBLE
, info
->input_dev
->ffbit
);
353 error
= input_ff_create_memless(info
->input_dev
, NULL
, vibra_play
);
355 dev_err(info
->dev
, "couldn't register vibrator to FF\n");
359 error
= input_register_device(info
->input_dev
);
361 dev_err(info
->dev
, "couldn't register input device\n");
365 platform_set_drvdata(pdev
, info
);
370 static struct platform_driver twl6040_vibra_driver
= {
371 .probe
= twl6040_vibra_probe
,
373 .name
= "twl6040-vibra",
374 .pm
= &twl6040_vibra_pm_ops
,
377 module_platform_driver(twl6040_vibra_driver
);
379 MODULE_ALIAS("platform:twl6040-vibra");
380 MODULE_DESCRIPTION("TWL6040 Vibra driver");
381 MODULE_LICENSE("GPL");
382 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
383 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");