drivers/ide/cs5535.c

   1 /*
   2  * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
   3  * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
   4  *
   5  * History:
   6  * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
   7  * - Reworked tuneproc, set_drive, misc mods to prep for mainline
   8  * - Work was sponsored by CIS (M) Sdn Bhd.
   9  * Ported to Kernel 2.6.11 on June 26, 2005 by
  10  *   Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
  11  *   Alexander Kiausch <alex.kiausch@t-online.de>
  12  * Originally developed by AMD for 2.4/2.6
  13  *
  14  * Development of this chipset driver was funded
  15  * by the nice folks at National Semiconductor/AMD.
  16  *
  17  * This program is free software; you can redistribute it and/or modify it
  18  * under the terms of the GNU General Public License version 2 as published by
  19  * the Free Software Foundation.
  20  *
  21  * Documentation:
  22  *  CS5535 documentation available from AMD
  23  */
  24
  25 #include <linux/module.h>
  26 #include <linux/pci.h>
  27 #include <linux/ide.h>
  28
  29 #define DRV_NAME "cs5535"
  30
  31 #define MSR_ATAC_BASE           0x51300000
  32 #define ATAC_GLD_MSR_CAP        (MSR_ATAC_BASE+0)
  33 #define ATAC_GLD_MSR_CONFIG     (MSR_ATAC_BASE+0x01)
  34 #define ATAC_GLD_MSR_SMI        (MSR_ATAC_BASE+0x02)
  35 #define ATAC_GLD_MSR_ERROR      (MSR_ATAC_BASE+0x03)
  36 #define ATAC_GLD_MSR_PM         (MSR_ATAC_BASE+0x04)
  37 #define ATAC_GLD_MSR_DIAG       (MSR_ATAC_BASE+0x05)
  38 #define ATAC_IO_BAR             (MSR_ATAC_BASE+0x08)
  39 #define ATAC_RESET              (MSR_ATAC_BASE+0x10)
  40 #define ATAC_CH0D0_PIO          (MSR_ATAC_BASE+0x20)
  41 #define ATAC_CH0D0_DMA          (MSR_ATAC_BASE+0x21)
  42 #define ATAC_CH0D1_PIO          (MSR_ATAC_BASE+0x22)
  43 #define ATAC_CH0D1_DMA          (MSR_ATAC_BASE+0x23)
  44 #define ATAC_PCI_ABRTERR        (MSR_ATAC_BASE+0x24)
  45 #define ATAC_BM0_CMD_PRIM       0x00
  46 #define ATAC_BM0_STS_PRIM       0x02
  47 #define ATAC_BM0_PRD            0x04
  48 #define CS5535_CABLE_DETECT     0x48
  49
  50 /* Format I PIO settings. We separate out cmd and data for safer timings */
  51
  52 static unsigned int cs5535_pio_cmd_timings[5] =
  53 { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
  54 static unsigned int cs5535_pio_dta_timings[5] =
  55 { 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
  56
  57 static unsigned int cs5535_mwdma_timings[3] =
  58 { 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
  59
  60 static unsigned int cs5535_udma_timings[5] =
  61 { 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
  62
  63 /* Macros to check if the register is the reset value -  reset value is an
  64    invalid timing and indicates the register has not been set previously */
  65
  66 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
  67 #define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
  68
  69 /****
  70  *      cs5535_set_speed         -     Configure the chipset to the new speed
  71  *      @drive: Drive to set up
  72  *      @speed: desired speed
  73  *
  74  *      cs5535_set_speed() configures the chipset to a new speed.
  75  */
  76 static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
  77 {
  78         u32 reg = 0, dummy;
  79         u8 unit = drive->dn & 1;
  80
  81         /* Set the PIO timings */
  82         if (speed < XFER_SW_DMA_0) {
  83                 ide_drive_t *pair = ide_get_pair_dev(drive);
  84                 u8 cmd, pioa;
  85
  86                 cmd = pioa = speed - XFER_PIO_0;
  87
  88                 if (pair) {
  89                         u8 piob = pair->pio_mode - XFER_PIO_0;
  90
  91                         if (piob < cmd)
  92                                 cmd = piob;
  93                 }
  94
  95                 /* Write the speed of the current drive */
  96                 reg = (cs5535_pio_cmd_timings[cmd] << 16) |
  97                         cs5535_pio_dta_timings[pioa];
  98                 wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
  99
 100                 /* And if nessesary - change the speed of the other drive */
 101                 rdmsr(unit ?  ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
 102
 103                 if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
 104                         cs5535_pio_cmd_timings[cmd]) {
 105                         reg &= 0x0000FFFF;
 106                         reg |= cs5535_pio_cmd_timings[cmd] << 16;
 107                         wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
 108                 }
 109
 110                 /* Set bit 31 of the DMA register for PIO format 1 timings */
 111                 rdmsr(unit ?  ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
 112                 wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
 113                                         reg | 0x80000000UL, 0);
 114         } else {
 115                 rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
 116
 117                 reg &= 0x80000000UL;  /* Preserve the PIO format bit */
 118
 119                 if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
 120                         reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
 121                 else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
 122                         reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
 123                 else
 124                         return;
 125
 126                 wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
 127         }
 128 }
 129
 130 /**
 131  *      cs5535_set_dma_mode     -       set host controller for DMA mode
 132  *      @hwif: port
 133  *      @drive: drive
 134  *
 135  *      Programs the chipset for DMA mode.
 136  */
 137
 138 static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 139 {
 140         cs5535_set_speed(drive, drive->dma_mode);
 141 }
 142
 143 /**
 144  *      cs5535_set_pio_mode     -       set host controller for PIO mode
 145  *      @hwif: port
 146  *      @drive: drive
 147  *
 148  *      A callback from the upper layers for PIO-only tuning.
 149  */
 150
 151 static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 152 {
 153         cs5535_set_speed(drive, drive->pio_mode);
 154 }
 155
 156 static u8 cs5535_cable_detect(ide_hwif_t *hwif)
 157 {
 158         struct pci_dev *dev = to_pci_dev(hwif->dev);
 159         u8 bit;
 160
 161         /* if a 80 wire cable was detected */
 162         pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
 163
 164         return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 165 }
 166
 167 static const struct ide_port_ops cs5535_port_ops = {
 168         .set_pio_mode           = cs5535_set_pio_mode,
 169         .set_dma_mode           = cs5535_set_dma_mode,
 170         .cable_detect           = cs5535_cable_detect,
 171 };
 172
 173 static const struct ide_port_info cs5535_chipset = {
 174         .name           = DRV_NAME,
 175         .port_ops       = &cs5535_port_ops,
 176         .host_flags     = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
 177         .pio_mask       = ATA_PIO4,
 178         .mwdma_mask     = ATA_MWDMA2,
 179         .udma_mask      = ATA_UDMA4,
 180 };
 181
 182 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 183 {
 184         return ide_pci_init_one(dev, &cs5535_chipset, NULL);
 185 }
 186
 187 static const struct pci_device_id cs5535_pci_tbl[] = {
 188         { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
 189         { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
 190         { 0, },
 191 };
 192
 193 MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
 194
 195 static struct pci_driver cs5535_pci_driver = {
 196         .name           = "CS5535_IDE",
 197         .id_table       = cs5535_pci_tbl,
 198         .probe          = cs5535_init_one,
 199         .remove         = ide_pci_remove,
 200         .suspend        = ide_pci_suspend,
 201         .resume         = ide_pci_resume,
 202 };
 203
 204 static int __init cs5535_ide_init(void)
 205 {
 206         return ide_pci_register_driver(&cs5535_pci_driver);
 207 }
 208
 209 static void __exit cs5535_ide_exit(void)
 210 {
 211         pci_unregister_driver(&cs5535_pci_driver);
 212 }
 213
 214 module_init(cs5535_ide_init);
 215 module_exit(cs5535_ide_exit);
 216
 217 MODULE_AUTHOR("AMD");
 218 MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
 219 MODULE_LICENSE("GPL");