dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / ide / ide-scan-pci.c
blobacf874800ca4086803d6740d3df32ca38b732017
1 /*
2 * support for probing IDE PCI devices in the PCI bus order
4 * Copyright (c) 1998-2000 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (c) 1995-1998 Mark Lord
7 * May be copied or modified under the terms of the GNU General Public License
8 */
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/ide.h>
16 * Module interfaces
19 static int pre_init = 1; /* Before first ordered IDE scan */
20 static LIST_HEAD(ide_pci_drivers);
23 * __ide_pci_register_driver - attach IDE driver
24 * @driver: pci driver
25 * @module: owner module of the driver
27 * Registers a driver with the IDE layer. The IDE layer arranges that
28 * boot time setup is done in the expected device order and then
29 * hands the controllers off to the core PCI code to do the rest of
30 * the work.
32 * Returns are the same as for pci_register_driver
35 int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
36 const char *mod_name)
38 if (!pre_init)
39 return __pci_register_driver(driver, module, mod_name);
40 driver->driver.owner = module;
41 list_add_tail(&driver->node, &ide_pci_drivers);
42 return 0;
44 EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
46 /**
47 * ide_scan_pcidev - find an IDE driver for a device
48 * @dev: PCI device to check
50 * Look for an IDE driver to handle the device we are considering.
51 * This is only used during boot up to get the ordering correct. After
52 * boot up the pci layer takes over the job.
55 static int __init ide_scan_pcidev(struct pci_dev *dev)
57 struct list_head *l;
58 struct pci_driver *d;
59 int ret;
61 list_for_each(l, &ide_pci_drivers) {
62 d = list_entry(l, struct pci_driver, node);
63 if (d->id_table) {
64 const struct pci_device_id *id =
65 pci_match_id(d->id_table, dev);
67 if (id != NULL) {
68 pci_assign_irq(dev);
69 ret = d->probe(dev, id);
70 if (ret >= 0) {
71 dev->driver = d;
72 pci_dev_get(dev);
73 return 1;
78 return 0;
81 /**
82 * ide_scan_pcibus - perform the initial IDE driver scan
84 * Perform the initial bus rather than driver ordered scan of the
85 * PCI drivers. After this all IDE pci handling becomes standard
86 * module ordering not traditionally ordered.
89 static int __init ide_scan_pcibus(void)
91 struct pci_dev *dev = NULL;
92 struct pci_driver *d;
93 struct list_head *l, *n;
95 pre_init = 0;
96 for_each_pci_dev(dev)
97 ide_scan_pcidev(dev);
100 * Hand the drivers over to the PCI layer now we
101 * are post init.
104 list_for_each_safe(l, n, &ide_pci_drivers) {
105 list_del(l);
106 d = list_entry(l, struct pci_driver, node);
107 if (__pci_register_driver(d, d->driver.owner,
108 d->driver.mod_name))
109 printk(KERN_ERR "%s: failed to register %s driver\n",
110 __func__, d->driver.mod_name);
113 return 0;
115 device_initcall(ide_scan_pcibus);