dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / input / mouse / appletouch.c
blobf1e66e257cff7843d93c3f1f10dcf2311b805b3b
1 /*
2 * Apple USB Touchpad (for post-February 2005 PowerBooks and MacBooks) driver
4 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
5 * Copyright (C) 2005-2008 Johannes Berg (johannes@sipsolutions.net)
6 * Copyright (C) 2005-2008 Stelian Pop (stelian@popies.net)
7 * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
8 * Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
9 * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
10 * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
11 * Copyright (C) 2007-2008 Sven Anders (anders@anduras.de)
13 * Thanks to Alex Harper <basilisk@foobox.net> for his inputs.
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
31 #include <linux/kernel.h>
32 #include <linux/errno.h>
33 #include <linux/slab.h>
34 #include <linux/module.h>
35 #include <linux/usb/input.h>
38 * Note: We try to keep the touchpad aspect ratio while still doing only
39 * simple arithmetics:
40 * 0 <= x <= (xsensors - 1) * xfact
41 * 0 <= y <= (ysensors - 1) * yfact
43 struct atp_info {
44 int xsensors; /* number of X sensors */
45 int xsensors_17; /* 17" models have more sensors */
46 int ysensors; /* number of Y sensors */
47 int xfact; /* X multiplication factor */
48 int yfact; /* Y multiplication factor */
49 int datalen; /* size of USB transfers */
50 void (*callback)(struct urb *); /* callback function */
51 int fuzz; /* fuzz touchpad generates */
54 static void atp_complete_geyser_1_2(struct urb *urb);
55 static void atp_complete_geyser_3_4(struct urb *urb);
57 static const struct atp_info fountain_info = {
58 .xsensors = 16,
59 .xsensors_17 = 26,
60 .ysensors = 16,
61 .xfact = 64,
62 .yfact = 43,
63 .datalen = 81,
64 .callback = atp_complete_geyser_1_2,
65 .fuzz = 16,
68 static const struct atp_info geyser1_info = {
69 .xsensors = 16,
70 .xsensors_17 = 26,
71 .ysensors = 16,
72 .xfact = 64,
73 .yfact = 43,
74 .datalen = 81,
75 .callback = atp_complete_geyser_1_2,
76 .fuzz = 16,
79 static const struct atp_info geyser2_info = {
80 .xsensors = 15,
81 .xsensors_17 = 20,
82 .ysensors = 9,
83 .xfact = 64,
84 .yfact = 43,
85 .datalen = 64,
86 .callback = atp_complete_geyser_1_2,
87 .fuzz = 0,
90 static const struct atp_info geyser3_info = {
91 .xsensors = 20,
92 .ysensors = 10,
93 .xfact = 64,
94 .yfact = 64,
95 .datalen = 64,
96 .callback = atp_complete_geyser_3_4,
97 .fuzz = 0,
100 static const struct atp_info geyser4_info = {
101 .xsensors = 20,
102 .ysensors = 10,
103 .xfact = 64,
104 .yfact = 64,
105 .datalen = 64,
106 .callback = atp_complete_geyser_3_4,
107 .fuzz = 0,
110 #define ATP_DEVICE(prod, info) \
112 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
113 USB_DEVICE_ID_MATCH_INT_CLASS | \
114 USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
115 .idVendor = 0x05ac, /* Apple */ \
116 .idProduct = (prod), \
117 .bInterfaceClass = 0x03, \
118 .bInterfaceProtocol = 0x02, \
119 .driver_info = (unsigned long) &info, \
123 * Table of devices (Product IDs) that work with this driver.
124 * (The names come from Info.plist in AppleUSBTrackpad.kext,
125 * According to Info.plist Geyser IV is the same as Geyser III.)
128 static const struct usb_device_id atp_table[] = {
129 /* PowerBooks Feb 2005, iBooks G4 */
130 ATP_DEVICE(0x020e, fountain_info), /* FOUNTAIN ANSI */
131 ATP_DEVICE(0x020f, fountain_info), /* FOUNTAIN ISO */
132 ATP_DEVICE(0x030a, fountain_info), /* FOUNTAIN TP ONLY */
133 ATP_DEVICE(0x030b, geyser1_info), /* GEYSER 1 TP ONLY */
135 /* PowerBooks Oct 2005 */
136 ATP_DEVICE(0x0214, geyser2_info), /* GEYSER 2 ANSI */
137 ATP_DEVICE(0x0215, geyser2_info), /* GEYSER 2 ISO */
138 ATP_DEVICE(0x0216, geyser2_info), /* GEYSER 2 JIS */
140 /* Core Duo MacBook & MacBook Pro */
141 ATP_DEVICE(0x0217, geyser3_info), /* GEYSER 3 ANSI */
142 ATP_DEVICE(0x0218, geyser3_info), /* GEYSER 3 ISO */
143 ATP_DEVICE(0x0219, geyser3_info), /* GEYSER 3 JIS */
145 /* Core2 Duo MacBook & MacBook Pro */
146 ATP_DEVICE(0x021a, geyser4_info), /* GEYSER 4 ANSI */
147 ATP_DEVICE(0x021b, geyser4_info), /* GEYSER 4 ISO */
148 ATP_DEVICE(0x021c, geyser4_info), /* GEYSER 4 JIS */
150 /* Core2 Duo MacBook3,1 */
151 ATP_DEVICE(0x0229, geyser4_info), /* GEYSER 4 HF ANSI */
152 ATP_DEVICE(0x022a, geyser4_info), /* GEYSER 4 HF ISO */
153 ATP_DEVICE(0x022b, geyser4_info), /* GEYSER 4 HF JIS */
155 /* Terminating entry */
158 MODULE_DEVICE_TABLE(usb, atp_table);
160 /* maximum number of sensors */
161 #define ATP_XSENSORS 26
162 #define ATP_YSENSORS 16
165 * The largest possible bank of sensors with additional buffer of 4 extra values
166 * on either side, for an array of smoothed sensor values.
168 #define ATP_SMOOTHSIZE 34
170 /* maximum pressure this driver will report */
171 #define ATP_PRESSURE 300
174 * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is
175 * ignored.
177 #define ATP_THRESHOLD 5
180 * How far we'll bitshift our sensor values before averaging them. Mitigates
181 * rounding errors.
183 #define ATP_SCALE 12
185 /* Geyser initialization constants */
186 #define ATP_GEYSER_MODE_READ_REQUEST_ID 1
187 #define ATP_GEYSER_MODE_WRITE_REQUEST_ID 9
188 #define ATP_GEYSER_MODE_REQUEST_VALUE 0x300
189 #define ATP_GEYSER_MODE_REQUEST_INDEX 0
190 #define ATP_GEYSER_MODE_VENDOR_VALUE 0x04
193 * enum atp_status_bits - status bit meanings
195 * These constants represent the meaning of the status bits.
196 * (only Geyser 3/4)
198 * @ATP_STATUS_BUTTON: The button was pressed
199 * @ATP_STATUS_BASE_UPDATE: Update of the base values (untouched pad)
200 * @ATP_STATUS_FROM_RESET: Reset previously performed
202 enum atp_status_bits {
203 ATP_STATUS_BUTTON = BIT(0),
204 ATP_STATUS_BASE_UPDATE = BIT(2),
205 ATP_STATUS_FROM_RESET = BIT(4),
208 /* Structure to hold all of our device specific stuff */
209 struct atp {
210 char phys[64];
211 struct usb_device *udev; /* usb device */
212 struct usb_interface *intf; /* usb interface */
213 struct urb *urb; /* usb request block */
214 u8 *data; /* transferred data */
215 struct input_dev *input; /* input dev */
216 const struct atp_info *info; /* touchpad model */
217 bool open;
218 bool valid; /* are the samples valid? */
219 bool size_detect_done;
220 bool overflow_warned;
221 int fingers_old; /* last reported finger count */
222 int x_old; /* last reported x/y, */
223 int y_old; /* used for smoothing */
224 signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS];
225 signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
226 int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
227 int smooth[ATP_SMOOTHSIZE];
228 int smooth_tmp[ATP_SMOOTHSIZE];
229 int idlecount; /* number of empty packets */
230 struct work_struct work;
233 #define dbg_dump(msg, tab) \
234 if (debug > 1) { \
235 int __i; \
236 printk(KERN_DEBUG "appletouch: %s", msg); \
237 for (__i = 0; __i < ATP_XSENSORS + ATP_YSENSORS; __i++) \
238 printk(" %02x", tab[__i]); \
239 printk("\n"); \
242 #define dprintk(format, a...) \
243 do { \
244 if (debug) \
245 printk(KERN_DEBUG format, ##a); \
246 } while (0)
248 MODULE_AUTHOR("Johannes Berg");
249 MODULE_AUTHOR("Stelian Pop");
250 MODULE_AUTHOR("Frank Arnold");
251 MODULE_AUTHOR("Michael Hanselmann");
252 MODULE_AUTHOR("Sven Anders");
253 MODULE_DESCRIPTION("Apple PowerBook and MacBook USB touchpad driver");
254 MODULE_LICENSE("GPL");
257 * Make the threshold a module parameter
259 static int threshold = ATP_THRESHOLD;
260 module_param(threshold, int, 0644);
261 MODULE_PARM_DESC(threshold, "Discard any change in data from a sensor"
262 " (the trackpad has many of these sensors)"
263 " less than this value.");
265 static int debug;
266 module_param(debug, int, 0644);
267 MODULE_PARM_DESC(debug, "Activate debugging output");
270 * By default newer Geyser devices send standard USB HID mouse
271 * packets (Report ID 2). This code changes device mode, so it
272 * sends raw sensor reports (Report ID 5).
274 static int atp_geyser_init(struct atp *dev)
276 struct usb_device *udev = dev->udev;
277 char *data;
278 int size;
279 int i;
280 int ret;
282 data = kmalloc(8, GFP_KERNEL);
283 if (!data) {
284 dev_err(&dev->intf->dev, "Out of memory\n");
285 return -ENOMEM;
288 size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
289 ATP_GEYSER_MODE_READ_REQUEST_ID,
290 USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
291 ATP_GEYSER_MODE_REQUEST_VALUE,
292 ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
294 if (size != 8) {
295 dprintk("atp_geyser_init: read error\n");
296 for (i = 0; i < 8; i++)
297 dprintk("appletouch[%d]: %d\n", i, data[i]);
299 dev_err(&dev->intf->dev, "Failed to read mode from device.\n");
300 ret = -EIO;
301 goto out_free;
304 /* Apply the mode switch */
305 data[0] = ATP_GEYSER_MODE_VENDOR_VALUE;
307 size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
308 ATP_GEYSER_MODE_WRITE_REQUEST_ID,
309 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
310 ATP_GEYSER_MODE_REQUEST_VALUE,
311 ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
313 if (size != 8) {
314 dprintk("atp_geyser_init: write error\n");
315 for (i = 0; i < 8; i++)
316 dprintk("appletouch[%d]: %d\n", i, data[i]);
318 dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n");
319 ret = -EIO;
320 goto out_free;
322 ret = 0;
323 out_free:
324 kfree(data);
325 return ret;
329 * Reinitialise the device. This usually stops stream of empty packets
330 * coming from it.
332 static void atp_reinit(struct work_struct *work)
334 struct atp *dev = container_of(work, struct atp, work);
335 int retval;
337 dprintk("appletouch: putting appletouch to sleep (reinit)\n");
338 atp_geyser_init(dev);
340 retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
341 if (retval)
342 dev_err(&dev->intf->dev,
343 "atp_reinit: usb_submit_urb failed with error %d\n",
344 retval);
347 static int atp_calculate_abs(struct atp *dev, int offset, int nb_sensors,
348 int fact, int *z, int *fingers)
350 int i, pass;
353 * Use offset to point xy_sensors at the first value in dev->xy_acc
354 * for whichever dimension we're looking at this particular go-round.
356 int *xy_sensors = dev->xy_acc + offset;
358 /* values to calculate mean */
359 int pcum = 0, psum = 0;
360 int is_increasing = 0;
362 *fingers = 0;
364 for (i = 0; i < nb_sensors; i++) {
365 if (xy_sensors[i] < threshold) {
366 if (is_increasing)
367 is_increasing = 0;
370 * Makes the finger detection more versatile. For example,
371 * two fingers with no gap will be detected. Also, my
372 * tests show it less likely to have intermittent loss
373 * of multiple finger readings while moving around (scrolling).
375 * Changes the multiple finger detection to counting humps on
376 * sensors (transitions from nonincreasing to increasing)
377 * instead of counting transitions from low sensors (no
378 * finger reading) to high sensors (finger above
379 * sensor)
381 * - Jason Parekh <jasonparekh@gmail.com>
384 } else if (i < 1 ||
385 (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
386 (*fingers)++;
387 is_increasing = 1;
388 } else if (i > 0 && (xy_sensors[i - 1] - xy_sensors[i] > threshold)) {
389 is_increasing = 0;
393 if (*fingers < 1) /* No need to continue if no fingers are found. */
394 return 0;
397 * Use a smoothed version of sensor data for movement calculations, to
398 * combat noise without needing to rely so heavily on a threshold.
399 * This improves tracking.
401 * The smoothed array is bigger than the original so that the smoothing
402 * doesn't result in edge values being truncated.
405 memset(dev->smooth, 0, 4 * sizeof(dev->smooth[0]));
406 /* Pull base values, scaled up to help avoid truncation errors. */
407 for (i = 0; i < nb_sensors; i++)
408 dev->smooth[i + 4] = xy_sensors[i] << ATP_SCALE;
409 memset(&dev->smooth[nb_sensors + 4], 0, 4 * sizeof(dev->smooth[0]));
411 for (pass = 0; pass < 4; pass++) {
412 /* Handle edge. */
413 dev->smooth_tmp[0] = (dev->smooth[0] + dev->smooth[1]) / 2;
415 /* Average values with neighbors. */
416 for (i = 1; i < nb_sensors + 7; i++)
417 dev->smooth_tmp[i] = (dev->smooth[i - 1] +
418 dev->smooth[i] * 2 +
419 dev->smooth[i + 1]) / 4;
421 /* Handle other edge. */
422 dev->smooth_tmp[i] = (dev->smooth[i - 1] + dev->smooth[i]) / 2;
424 memcpy(dev->smooth, dev->smooth_tmp, sizeof(dev->smooth));
427 for (i = 0; i < nb_sensors + 8; i++) {
429 * Skip values if they're small enough to be truncated to 0
430 * by scale. Mostly noise.
432 if ((dev->smooth[i] >> ATP_SCALE) > 0) {
433 pcum += dev->smooth[i] * i;
434 psum += dev->smooth[i];
438 if (psum > 0) {
439 *z = psum >> ATP_SCALE; /* Scale down pressure output. */
440 return pcum * fact / psum;
443 return 0;
446 static inline void atp_report_fingers(struct input_dev *input, int fingers)
448 input_report_key(input, BTN_TOOL_FINGER, fingers == 1);
449 input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2);
450 input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
453 /* Check URB status and for correct length of data package */
455 #define ATP_URB_STATUS_SUCCESS 0
456 #define ATP_URB_STATUS_ERROR 1
457 #define ATP_URB_STATUS_ERROR_FATAL 2
459 static int atp_status_check(struct urb *urb)
461 struct atp *dev = urb->context;
462 struct usb_interface *intf = dev->intf;
464 switch (urb->status) {
465 case 0:
466 /* success */
467 break;
468 case -EOVERFLOW:
469 if (!dev->overflow_warned) {
470 dev_warn(&intf->dev,
471 "appletouch: OVERFLOW with data length %d, actual length is %d\n",
472 dev->info->datalen, dev->urb->actual_length);
473 dev->overflow_warned = true;
475 /* fall through */
476 case -ECONNRESET:
477 case -ENOENT:
478 case -ESHUTDOWN:
479 /* This urb is terminated, clean up */
480 dev_dbg(&intf->dev,
481 "atp_complete: urb shutting down with status: %d\n",
482 urb->status);
483 return ATP_URB_STATUS_ERROR_FATAL;
485 default:
486 dev_dbg(&intf->dev,
487 "atp_complete: nonzero urb status received: %d\n",
488 urb->status);
489 return ATP_URB_STATUS_ERROR;
492 /* drop incomplete datasets */
493 if (dev->urb->actual_length != dev->info->datalen) {
494 dprintk("appletouch: incomplete data package"
495 " (first byte: %d, length: %d).\n",
496 dev->data[0], dev->urb->actual_length);
497 return ATP_URB_STATUS_ERROR;
500 return ATP_URB_STATUS_SUCCESS;
503 static void atp_detect_size(struct atp *dev)
505 int i;
507 /* 17" Powerbooks have extra X sensors */
508 for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
509 if (dev->xy_cur[i]) {
511 dev_info(&dev->intf->dev,
512 "appletouch: 17\" model detected.\n");
514 input_set_abs_params(dev->input, ABS_X, 0,
515 (dev->info->xsensors_17 - 1) *
516 dev->info->xfact - 1,
517 dev->info->fuzz, 0);
518 break;
524 * USB interrupt callback functions
527 /* Interrupt function for older touchpads: FOUNTAIN/GEYSER1/GEYSER2 */
529 static void atp_complete_geyser_1_2(struct urb *urb)
531 int x, y, x_z, y_z, x_f, y_f;
532 int retval, i, j;
533 int key, fingers;
534 struct atp *dev = urb->context;
535 int status = atp_status_check(urb);
537 if (status == ATP_URB_STATUS_ERROR_FATAL)
538 return;
539 else if (status == ATP_URB_STATUS_ERROR)
540 goto exit;
542 /* reorder the sensors values */
543 if (dev->info == &geyser2_info) {
544 memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
547 * The values are laid out like this:
548 * Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ...
549 * '-' is an unused value.
552 /* read X values */
553 for (i = 0, j = 19; i < 20; i += 2, j += 3) {
554 dev->xy_cur[i] = dev->data[j];
555 dev->xy_cur[i + 1] = dev->data[j + 1];
558 /* read Y values */
559 for (i = 0, j = 1; i < 9; i += 2, j += 3) {
560 dev->xy_cur[ATP_XSENSORS + i] = dev->data[j];
561 dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1];
563 } else {
564 for (i = 0; i < 8; i++) {
565 /* X values */
566 dev->xy_cur[i + 0] = dev->data[5 * i + 2];
567 dev->xy_cur[i + 8] = dev->data[5 * i + 4];
568 dev->xy_cur[i + 16] = dev->data[5 * i + 42];
569 if (i < 2)
570 dev->xy_cur[i + 24] = dev->data[5 * i + 44];
572 /* Y values */
573 dev->xy_cur[ATP_XSENSORS + i] = dev->data[5 * i + 1];
574 dev->xy_cur[ATP_XSENSORS + i + 8] = dev->data[5 * i + 3];
578 dbg_dump("sample", dev->xy_cur);
580 if (!dev->valid) {
581 /* first sample */
582 dev->valid = true;
583 dev->x_old = dev->y_old = -1;
585 /* Store first sample */
586 memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
588 /* Perform size detection, if not done already */
589 if (unlikely(!dev->size_detect_done)) {
590 atp_detect_size(dev);
591 dev->size_detect_done = true;
592 goto exit;
596 for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
597 /* accumulate the change */
598 signed char change = dev->xy_old[i] - dev->xy_cur[i];
599 dev->xy_acc[i] -= change;
601 /* prevent down drifting */
602 if (dev->xy_acc[i] < 0)
603 dev->xy_acc[i] = 0;
606 memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
608 dbg_dump("accumulator", dev->xy_acc);
610 x = atp_calculate_abs(dev, 0, ATP_XSENSORS,
611 dev->info->xfact, &x_z, &x_f);
612 y = atp_calculate_abs(dev, ATP_XSENSORS, ATP_YSENSORS,
613 dev->info->yfact, &y_z, &y_f);
614 key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON;
616 fingers = max(x_f, y_f);
618 if (x && y && fingers == dev->fingers_old) {
619 if (dev->x_old != -1) {
620 x = (dev->x_old * 7 + x) >> 3;
621 y = (dev->y_old * 7 + y) >> 3;
622 dev->x_old = x;
623 dev->y_old = y;
625 if (debug > 1)
626 printk(KERN_DEBUG "appletouch: "
627 "X: %3d Y: %3d Xz: %3d Yz: %3d\n",
628 x, y, x_z, y_z);
630 input_report_key(dev->input, BTN_TOUCH, 1);
631 input_report_abs(dev->input, ABS_X, x);
632 input_report_abs(dev->input, ABS_Y, y);
633 input_report_abs(dev->input, ABS_PRESSURE,
634 min(ATP_PRESSURE, x_z + y_z));
635 atp_report_fingers(dev->input, fingers);
637 dev->x_old = x;
638 dev->y_old = y;
640 } else if (!x && !y) {
642 dev->x_old = dev->y_old = -1;
643 dev->fingers_old = 0;
644 input_report_key(dev->input, BTN_TOUCH, 0);
645 input_report_abs(dev->input, ABS_PRESSURE, 0);
646 atp_report_fingers(dev->input, 0);
648 /* reset the accumulator on release */
649 memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
652 if (fingers != dev->fingers_old)
653 dev->x_old = dev->y_old = -1;
654 dev->fingers_old = fingers;
656 input_report_key(dev->input, BTN_LEFT, key);
657 input_sync(dev->input);
659 exit:
660 retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
661 if (retval)
662 dev_err(&dev->intf->dev,
663 "atp_complete: usb_submit_urb failed with result %d\n",
664 retval);
667 /* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
669 static void atp_complete_geyser_3_4(struct urb *urb)
671 int x, y, x_z, y_z, x_f, y_f;
672 int retval, i, j;
673 int key, fingers;
674 struct atp *dev = urb->context;
675 int status = atp_status_check(urb);
677 if (status == ATP_URB_STATUS_ERROR_FATAL)
678 return;
679 else if (status == ATP_URB_STATUS_ERROR)
680 goto exit;
682 /* Reorder the sensors values:
684 * The values are laid out like this:
685 * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
686 * '-' is an unused value.
689 /* read X values */
690 for (i = 0, j = 19; i < 20; i += 2, j += 3) {
691 dev->xy_cur[i] = dev->data[j + 1];
692 dev->xy_cur[i + 1] = dev->data[j + 2];
694 /* read Y values */
695 for (i = 0, j = 1; i < 9; i += 2, j += 3) {
696 dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
697 dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
700 dbg_dump("sample", dev->xy_cur);
702 /* Just update the base values (i.e. touchpad in untouched state) */
703 if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
705 dprintk("appletouch: updated base values\n");
707 memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
708 goto exit;
711 for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
712 /* calculate the change */
713 dev->xy_acc[i] = dev->xy_cur[i] - dev->xy_old[i];
715 /* this is a round-robin value, so couple with that */
716 if (dev->xy_acc[i] > 127)
717 dev->xy_acc[i] -= 256;
719 if (dev->xy_acc[i] < -127)
720 dev->xy_acc[i] += 256;
722 /* prevent down drifting */
723 if (dev->xy_acc[i] < 0)
724 dev->xy_acc[i] = 0;
727 dbg_dump("accumulator", dev->xy_acc);
729 x = atp_calculate_abs(dev, 0, ATP_XSENSORS,
730 dev->info->xfact, &x_z, &x_f);
731 y = atp_calculate_abs(dev, ATP_XSENSORS, ATP_YSENSORS,
732 dev->info->yfact, &y_z, &y_f);
734 key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON;
736 fingers = max(x_f, y_f);
738 if (x && y && fingers == dev->fingers_old) {
739 if (dev->x_old != -1) {
740 x = (dev->x_old * 7 + x) >> 3;
741 y = (dev->y_old * 7 + y) >> 3;
742 dev->x_old = x;
743 dev->y_old = y;
745 if (debug > 1)
746 printk(KERN_DEBUG "appletouch: X: %3d Y: %3d "
747 "Xz: %3d Yz: %3d\n",
748 x, y, x_z, y_z);
750 input_report_key(dev->input, BTN_TOUCH, 1);
751 input_report_abs(dev->input, ABS_X, x);
752 input_report_abs(dev->input, ABS_Y, y);
753 input_report_abs(dev->input, ABS_PRESSURE,
754 min(ATP_PRESSURE, x_z + y_z));
755 atp_report_fingers(dev->input, fingers);
757 dev->x_old = x;
758 dev->y_old = y;
760 } else if (!x && !y) {
762 dev->x_old = dev->y_old = -1;
763 dev->fingers_old = 0;
764 input_report_key(dev->input, BTN_TOUCH, 0);
765 input_report_abs(dev->input, ABS_PRESSURE, 0);
766 atp_report_fingers(dev->input, 0);
768 /* reset the accumulator on release */
769 memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
772 if (fingers != dev->fingers_old)
773 dev->x_old = dev->y_old = -1;
774 dev->fingers_old = fingers;
776 input_report_key(dev->input, BTN_LEFT, key);
777 input_sync(dev->input);
780 * Geysers 3/4 will continue to send packets continually after
781 * the first touch unless reinitialised. Do so if it's been
782 * idle for a while in order to avoid waking the kernel up
783 * several hundred times a second.
787 * Button must not be pressed when entering suspend,
788 * otherwise we will never release the button.
790 if (!x && !y && !key) {
791 dev->idlecount++;
792 if (dev->idlecount == 10) {
793 dev->x_old = dev->y_old = -1;
794 dev->idlecount = 0;
795 schedule_work(&dev->work);
796 /* Don't resubmit urb here, wait for reinit */
797 return;
799 } else
800 dev->idlecount = 0;
802 exit:
803 retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
804 if (retval)
805 dev_err(&dev->intf->dev,
806 "atp_complete: usb_submit_urb failed with result %d\n",
807 retval);
810 static int atp_open(struct input_dev *input)
812 struct atp *dev = input_get_drvdata(input);
814 if (usb_submit_urb(dev->urb, GFP_KERNEL))
815 return -EIO;
817 dev->open = true;
818 return 0;
821 static void atp_close(struct input_dev *input)
823 struct atp *dev = input_get_drvdata(input);
825 usb_kill_urb(dev->urb);
826 cancel_work_sync(&dev->work);
827 dev->open = false;
830 static int atp_handle_geyser(struct atp *dev)
832 if (dev->info != &fountain_info) {
833 /* switch to raw sensor mode */
834 if (atp_geyser_init(dev))
835 return -EIO;
837 dev_info(&dev->intf->dev, "Geyser mode initialized.\n");
840 return 0;
843 static int atp_probe(struct usb_interface *iface,
844 const struct usb_device_id *id)
846 struct atp *dev;
847 struct input_dev *input_dev;
848 struct usb_device *udev = interface_to_usbdev(iface);
849 struct usb_host_interface *iface_desc;
850 struct usb_endpoint_descriptor *endpoint;
851 int int_in_endpointAddr = 0;
852 int i, error = -ENOMEM;
853 const struct atp_info *info = (const struct atp_info *)id->driver_info;
855 /* set up the endpoint information */
856 /* use only the first interrupt-in endpoint */
857 iface_desc = iface->cur_altsetting;
858 for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
859 endpoint = &iface_desc->endpoint[i].desc;
860 if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
861 /* we found an interrupt in endpoint */
862 int_in_endpointAddr = endpoint->bEndpointAddress;
863 break;
866 if (!int_in_endpointAddr) {
867 dev_err(&iface->dev, "Could not find int-in endpoint\n");
868 return -EIO;
871 /* allocate memory for our device state and initialize it */
872 dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
873 input_dev = input_allocate_device();
874 if (!dev || !input_dev) {
875 dev_err(&iface->dev, "Out of memory\n");
876 goto err_free_devs;
879 dev->udev = udev;
880 dev->intf = iface;
881 dev->input = input_dev;
882 dev->info = info;
883 dev->overflow_warned = false;
885 dev->urb = usb_alloc_urb(0, GFP_KERNEL);
886 if (!dev->urb)
887 goto err_free_devs;
889 dev->data = usb_alloc_coherent(dev->udev, dev->info->datalen, GFP_KERNEL,
890 &dev->urb->transfer_dma);
891 if (!dev->data)
892 goto err_free_urb;
894 usb_fill_int_urb(dev->urb, udev,
895 usb_rcvintpipe(udev, int_in_endpointAddr),
896 dev->data, dev->info->datalen,
897 dev->info->callback, dev, 1);
899 error = atp_handle_geyser(dev);
900 if (error)
901 goto err_free_buffer;
903 usb_make_path(udev, dev->phys, sizeof(dev->phys));
904 strlcat(dev->phys, "/input0", sizeof(dev->phys));
906 input_dev->name = "appletouch";
907 input_dev->phys = dev->phys;
908 usb_to_input_id(dev->udev, &input_dev->id);
909 input_dev->dev.parent = &iface->dev;
911 input_set_drvdata(input_dev, dev);
913 input_dev->open = atp_open;
914 input_dev->close = atp_close;
916 set_bit(EV_ABS, input_dev->evbit);
918 input_set_abs_params(input_dev, ABS_X, 0,
919 (dev->info->xsensors - 1) * dev->info->xfact - 1,
920 dev->info->fuzz, 0);
921 input_set_abs_params(input_dev, ABS_Y, 0,
922 (dev->info->ysensors - 1) * dev->info->yfact - 1,
923 dev->info->fuzz, 0);
924 input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
926 set_bit(EV_KEY, input_dev->evbit);
927 set_bit(BTN_TOUCH, input_dev->keybit);
928 set_bit(BTN_TOOL_FINGER, input_dev->keybit);
929 set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
930 set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
931 set_bit(BTN_LEFT, input_dev->keybit);
933 error = input_register_device(dev->input);
934 if (error)
935 goto err_free_buffer;
937 /* save our data pointer in this interface device */
938 usb_set_intfdata(iface, dev);
940 INIT_WORK(&dev->work, atp_reinit);
942 return 0;
944 err_free_buffer:
945 usb_free_coherent(dev->udev, dev->info->datalen,
946 dev->data, dev->urb->transfer_dma);
947 err_free_urb:
948 usb_free_urb(dev->urb);
949 err_free_devs:
950 usb_set_intfdata(iface, NULL);
951 kfree(dev);
952 input_free_device(input_dev);
953 return error;
956 static void atp_disconnect(struct usb_interface *iface)
958 struct atp *dev = usb_get_intfdata(iface);
960 usb_set_intfdata(iface, NULL);
961 if (dev) {
962 usb_kill_urb(dev->urb);
963 input_unregister_device(dev->input);
964 usb_free_coherent(dev->udev, dev->info->datalen,
965 dev->data, dev->urb->transfer_dma);
966 usb_free_urb(dev->urb);
967 kfree(dev);
969 dev_info(&iface->dev, "input: appletouch disconnected\n");
972 static int atp_recover(struct atp *dev)
974 int error;
976 error = atp_handle_geyser(dev);
977 if (error)
978 return error;
980 if (dev->open && usb_submit_urb(dev->urb, GFP_KERNEL))
981 return -EIO;
983 return 0;
986 static int atp_suspend(struct usb_interface *iface, pm_message_t message)
988 struct atp *dev = usb_get_intfdata(iface);
990 usb_kill_urb(dev->urb);
991 return 0;
994 static int atp_resume(struct usb_interface *iface)
996 struct atp *dev = usb_get_intfdata(iface);
998 if (dev->open && usb_submit_urb(dev->urb, GFP_KERNEL))
999 return -EIO;
1001 return 0;
1004 static int atp_reset_resume(struct usb_interface *iface)
1006 struct atp *dev = usb_get_intfdata(iface);
1008 return atp_recover(dev);
1011 static struct usb_driver atp_driver = {
1012 .name = "appletouch",
1013 .probe = atp_probe,
1014 .disconnect = atp_disconnect,
1015 .suspend = atp_suspend,
1016 .resume = atp_resume,
1017 .reset_resume = atp_reset_resume,
1018 .id_table = atp_table,
1021 module_usb_driver(atp_driver);