dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / input / mouse / elantech.h
blob119727085a6055e9cc289da522cec6de03e6888d
1 /*
2 * Elantech Touchpad driver (v6)
4 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
10 * Trademarks are the property of their respective owners.
13 #ifndef _ELANTECH_H
14 #define _ELANTECH_H
17 * Command values for Synaptics style queries
19 #define ETP_FW_ID_QUERY 0x00
20 #define ETP_FW_VERSION_QUERY 0x01
21 #define ETP_CAPABILITIES_QUERY 0x02
22 #define ETP_SAMPLE_QUERY 0x03
23 #define ETP_RESOLUTION_QUERY 0x04
26 * Command values for register reading or writing
28 #define ETP_REGISTER_READ 0x10
29 #define ETP_REGISTER_WRITE 0x11
30 #define ETP_REGISTER_READWRITE 0x00
33 * Hardware version 2 custom PS/2 command value
35 #define ETP_PS2_CUSTOM_COMMAND 0xf8
38 * Times to retry a ps2_command and millisecond delay between tries
40 #define ETP_PS2_COMMAND_TRIES 3
41 #define ETP_PS2_COMMAND_DELAY 500
44 * Times to try to read back a register and millisecond delay between tries
46 #define ETP_READ_BACK_TRIES 5
47 #define ETP_READ_BACK_DELAY 2000
50 * Register bitmasks for hardware version 1
52 #define ETP_R10_ABSOLUTE_MODE 0x04
53 #define ETP_R11_4_BYTE_MODE 0x02
56 * Capability bitmasks
58 #define ETP_CAP_HAS_ROCKER 0x04
61 * One hard to find application note states that X axis range is 0 to 576
62 * and Y axis range is 0 to 384 for harware version 1.
63 * Edge fuzz might be necessary because of bezel around the touchpad
65 #define ETP_EDGE_FUZZ_V1 32
67 #define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1)
68 #define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1)
69 #define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1)
70 #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1)
73 * The resolution for older v2 hardware doubled.
74 * (newer v2's firmware provides command so we can query)
76 #define ETP_XMIN_V2 0
77 #define ETP_XMAX_V2 1152
78 #define ETP_YMIN_V2 0
79 #define ETP_YMAX_V2 768
81 #define ETP_PMIN_V2 0
82 #define ETP_PMAX_V2 255
83 #define ETP_WMIN_V2 0
84 #define ETP_WMAX_V2 15
87 * v3 hardware has 2 kinds of packet types,
88 * v4 hardware has 3.
90 #define PACKET_UNKNOWN 0x01
91 #define PACKET_DEBOUNCE 0x02
92 #define PACKET_V3_HEAD 0x03
93 #define PACKET_V3_TAIL 0x04
94 #define PACKET_V4_HEAD 0x05
95 #define PACKET_V4_MOTION 0x06
96 #define PACKET_V4_STATUS 0x07
97 #define PACKET_TRACKPOINT 0x08
100 * track up to 5 fingers for v4 hardware
102 #define ETP_MAX_FINGERS 5
105 * weight value for v4 hardware
107 #define ETP_WEIGHT_VALUE 5
110 * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04)
112 #define ETP_BUS_PS2_ONLY 0
113 #define ETP_BUS_SMB_ALERT_ONLY 1
114 #define ETP_BUS_SMB_HST_NTFY_ONLY 2
115 #define ETP_BUS_PS2_SMB_ALERT 3
116 #define ETP_BUS_PS2_SMB_HST_NTFY 4
119 * New ICs are either using SMBus Host Notify or just plain PS2.
121 * ETP_FW_VERSION_QUERY is:
122 * Byte 1:
123 * - bit 0..3: IC BODY
124 * Byte 2:
125 * - bit 4: HiddenButton
126 * - bit 5: PS2_SMBUS_NOTIFY
127 * - bit 6: PS2CRCCheck
129 #define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version) \
130 ((((fw_version) & 0x0f2000) == 0x0f2000) && \
131 ((fw_version) & 0x0000ff) > 0)
134 * The base position for one finger, v4 hardware
136 struct finger_pos {
137 unsigned int x;
138 unsigned int y;
141 struct elantech_device_info {
142 unsigned char capabilities[3];
143 unsigned char samples[3];
144 unsigned char debug;
145 unsigned char hw_version;
146 unsigned int fw_version;
147 unsigned int x_res;
148 unsigned int y_res;
149 unsigned int bus;
150 bool paritycheck;
151 bool jumpy_cursor;
152 bool reports_pressure;
153 bool crc_enabled;
154 bool set_hw_resolution;
155 bool has_trackpoint;
156 int (*send_cmd)(struct psmouse *psmouse, unsigned char c,
157 unsigned char *param);
160 struct elantech_data {
161 struct input_dev *tp_dev; /* Relative device for trackpoint */
162 char tp_phys[32];
163 unsigned char reg_07;
164 unsigned char reg_10;
165 unsigned char reg_11;
166 unsigned char reg_20;
167 unsigned char reg_21;
168 unsigned char reg_22;
169 unsigned char reg_23;
170 unsigned char reg_24;
171 unsigned char reg_25;
172 unsigned char reg_26;
173 unsigned int single_finger_reports;
174 unsigned int y_max;
175 unsigned int width;
176 struct finger_pos mt[ETP_MAX_FINGERS];
177 unsigned char parity[256];
178 struct elantech_device_info info;
179 void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
182 #ifdef CONFIG_MOUSE_PS2_ELANTECH
183 int elantech_detect(struct psmouse *psmouse, bool set_properties);
184 int elantech_init_ps2(struct psmouse *psmouse);
185 int elantech_init(struct psmouse *psmouse);
186 #else
187 static inline int elantech_detect(struct psmouse *psmouse, bool set_properties)
189 return -ENOSYS;
191 static inline int elantech_init(struct psmouse *psmouse)
193 return -ENOSYS;
195 static inline int elantech_init_ps2(struct psmouse *psmouse)
197 return -ENOSYS;
199 #endif /* CONFIG_MOUSE_PS2_ELANTECH */
201 #if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
202 int elantech_init_smbus(struct psmouse *psmouse);
203 #else
204 static inline int elantech_init_smbus(struct psmouse *psmouse)
206 return -ENOSYS;
208 #endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
210 #endif