staging: rtl8188eu: remove unused code
[linux/fpc-iii.git] / drivers / mmc / core / pwrseq_emmc.c
blobf6dde9edd7a3f4c54e33ec37208a10e19b2764ca
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2015, Samsung Electronics Co., Ltd.
5 * Author: Marek Szyprowski <m.szyprowski@samsung.com>
7 * Simple eMMC hardware reset provider
8 */
9 #include <linux/delay.h>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/module.h>
14 #include <linux/slab.h>
15 #include <linux/device.h>
16 #include <linux/err.h>
17 #include <linux/gpio/consumer.h>
18 #include <linux/reboot.h>
20 #include <linux/mmc/host.h>
22 #include "pwrseq.h"
24 struct mmc_pwrseq_emmc {
25 struct mmc_pwrseq pwrseq;
26 struct notifier_block reset_nb;
27 struct gpio_desc *reset_gpio;
30 #define to_pwrseq_emmc(p) container_of(p, struct mmc_pwrseq_emmc, pwrseq)
32 static void mmc_pwrseq_emmc_reset(struct mmc_host *host)
34 struct mmc_pwrseq_emmc *pwrseq = to_pwrseq_emmc(host->pwrseq);
36 gpiod_set_value_cansleep(pwrseq->reset_gpio, 1);
37 udelay(1);
38 gpiod_set_value_cansleep(pwrseq->reset_gpio, 0);
39 udelay(200);
42 static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
43 unsigned long mode, void *cmd)
45 struct mmc_pwrseq_emmc *pwrseq = container_of(this,
46 struct mmc_pwrseq_emmc, reset_nb);
47 gpiod_set_value(pwrseq->reset_gpio, 1);
48 udelay(1);
49 gpiod_set_value(pwrseq->reset_gpio, 0);
50 udelay(200);
52 return NOTIFY_DONE;
55 static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = {
56 .reset = mmc_pwrseq_emmc_reset,
59 static int mmc_pwrseq_emmc_probe(struct platform_device *pdev)
61 struct mmc_pwrseq_emmc *pwrseq;
62 struct device *dev = &pdev->dev;
64 pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
65 if (!pwrseq)
66 return -ENOMEM;
68 pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
69 if (IS_ERR(pwrseq->reset_gpio))
70 return PTR_ERR(pwrseq->reset_gpio);
72 if (!gpiod_cansleep(pwrseq->reset_gpio)) {
74 * register reset handler to ensure emmc reset also from
75 * emergency_reboot(), priority 255 is the highest priority
76 * so it will be executed before any system reboot handler.
78 pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb;
79 pwrseq->reset_nb.priority = 255;
80 register_restart_handler(&pwrseq->reset_nb);
81 } else {
82 dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n");
85 pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops;
86 pwrseq->pwrseq.dev = dev;
87 pwrseq->pwrseq.owner = THIS_MODULE;
88 platform_set_drvdata(pdev, pwrseq);
90 return mmc_pwrseq_register(&pwrseq->pwrseq);
93 static int mmc_pwrseq_emmc_remove(struct platform_device *pdev)
95 struct mmc_pwrseq_emmc *pwrseq = platform_get_drvdata(pdev);
97 unregister_restart_handler(&pwrseq->reset_nb);
98 mmc_pwrseq_unregister(&pwrseq->pwrseq);
100 return 0;
103 static const struct of_device_id mmc_pwrseq_emmc_of_match[] = {
104 { .compatible = "mmc-pwrseq-emmc",},
105 {/* sentinel */},
108 MODULE_DEVICE_TABLE(of, mmc_pwrseq_emmc_of_match);
110 static struct platform_driver mmc_pwrseq_emmc_driver = {
111 .probe = mmc_pwrseq_emmc_probe,
112 .remove = mmc_pwrseq_emmc_remove,
113 .driver = {
114 .name = "pwrseq_emmc",
115 .of_match_table = mmc_pwrseq_emmc_of_match,
119 module_platform_driver(mmc_pwrseq_emmc_driver);
120 MODULE_LICENSE("GPL v2");