1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi chip
5 * Copyright (C) 2016 Matt Ranostay <matt@ranostay.consulting>
7 * Based on the original work pwrseq_simple.c
8 * Copyright (C) 2014 Linaro Ltd
9 * Author: Ulf Hansson <ulf.hansson@linaro.org>
12 #include <linux/delay.h>
13 #include <linux/init.h>
14 #include <linux/kernel.h>
15 #include <linux/platform_device.h>
16 #include <linux/module.h>
17 #include <linux/slab.h>
18 #include <linux/device.h>
19 #include <linux/err.h>
20 #include <linux/gpio/consumer.h>
22 #include <linux/mmc/host.h>
26 struct mmc_pwrseq_sd8787
{
27 struct mmc_pwrseq pwrseq
;
28 struct gpio_desc
*reset_gpio
;
29 struct gpio_desc
*pwrdn_gpio
;
32 #define to_pwrseq_sd8787(p) container_of(p, struct mmc_pwrseq_sd8787, pwrseq)
34 static void mmc_pwrseq_sd8787_pre_power_on(struct mmc_host
*host
)
36 struct mmc_pwrseq_sd8787
*pwrseq
= to_pwrseq_sd8787(host
->pwrseq
);
38 gpiod_set_value_cansleep(pwrseq
->reset_gpio
, 1);
41 gpiod_set_value_cansleep(pwrseq
->pwrdn_gpio
, 1);
44 static void mmc_pwrseq_sd8787_power_off(struct mmc_host
*host
)
46 struct mmc_pwrseq_sd8787
*pwrseq
= to_pwrseq_sd8787(host
->pwrseq
);
48 gpiod_set_value_cansleep(pwrseq
->pwrdn_gpio
, 0);
49 gpiod_set_value_cansleep(pwrseq
->reset_gpio
, 0);
52 static const struct mmc_pwrseq_ops mmc_pwrseq_sd8787_ops
= {
53 .pre_power_on
= mmc_pwrseq_sd8787_pre_power_on
,
54 .power_off
= mmc_pwrseq_sd8787_power_off
,
57 static const struct of_device_id mmc_pwrseq_sd8787_of_match
[] = {
58 { .compatible
= "mmc-pwrseq-sd8787",},
61 MODULE_DEVICE_TABLE(of
, mmc_pwrseq_sd8787_of_match
);
63 static int mmc_pwrseq_sd8787_probe(struct platform_device
*pdev
)
65 struct mmc_pwrseq_sd8787
*pwrseq
;
66 struct device
*dev
= &pdev
->dev
;
68 pwrseq
= devm_kzalloc(dev
, sizeof(*pwrseq
), GFP_KERNEL
);
72 pwrseq
->pwrdn_gpio
= devm_gpiod_get(dev
, "powerdown", GPIOD_OUT_LOW
);
73 if (IS_ERR(pwrseq
->pwrdn_gpio
))
74 return PTR_ERR(pwrseq
->pwrdn_gpio
);
76 pwrseq
->reset_gpio
= devm_gpiod_get(dev
, "reset", GPIOD_OUT_LOW
);
77 if (IS_ERR(pwrseq
->reset_gpio
))
78 return PTR_ERR(pwrseq
->reset_gpio
);
80 pwrseq
->pwrseq
.dev
= dev
;
81 pwrseq
->pwrseq
.ops
= &mmc_pwrseq_sd8787_ops
;
82 pwrseq
->pwrseq
.owner
= THIS_MODULE
;
83 platform_set_drvdata(pdev
, pwrseq
);
85 return mmc_pwrseq_register(&pwrseq
->pwrseq
);
88 static int mmc_pwrseq_sd8787_remove(struct platform_device
*pdev
)
90 struct mmc_pwrseq_sd8787
*pwrseq
= platform_get_drvdata(pdev
);
92 mmc_pwrseq_unregister(&pwrseq
->pwrseq
);
97 static struct platform_driver mmc_pwrseq_sd8787_driver
= {
98 .probe
= mmc_pwrseq_sd8787_probe
,
99 .remove
= mmc_pwrseq_sd8787_remove
,
101 .name
= "pwrseq_sd8787",
102 .of_match_table
= mmc_pwrseq_sd8787_of_match
,
106 module_platform_driver(mmc_pwrseq_sd8787_driver
);
107 MODULE_LICENSE("GPL v2");