USB: serial: option: reimplement interface masking
[linux/fpc-iii.git] / arch / arm / mach-exynos / exynos.c
blobfbd108ce8745742d4dab008adbdc634883cf76d2
1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // SAMSUNG EXYNOS Flattened Device Tree enabled machine
4 //
5 // Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
6 // http://www.samsung.com
8 #include <linux/init.h>
9 #include <linux/io.h>
10 #include <linux/of.h>
11 #include <linux/of_address.h>
12 #include <linux/of_fdt.h>
13 #include <linux/platform_device.h>
14 #include <linux/irqchip.h>
15 #include <linux/soc/samsung/exynos-regs-pmu.h>
17 #include <asm/cacheflush.h>
18 #include <asm/hardware/cache-l2x0.h>
19 #include <asm/mach/arch.h>
20 #include <asm/mach/map.h>
22 #include <mach/map.h>
23 #include <plat/cpu.h>
25 #include "common.h"
27 static struct map_desc exynos4_iodesc[] __initdata = {
29 .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
30 .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
31 .length = SZ_8K,
32 .type = MT_DEVICE,
36 static struct platform_device exynos_cpuidle = {
37 .name = "exynos_cpuidle",
38 #ifdef CONFIG_ARM_EXYNOS_CPUIDLE
39 .dev.platform_data = exynos_enter_aftr,
40 #endif
41 .id = -1,
44 void __iomem *sysram_base_addr __ro_after_init;
45 void __iomem *sysram_ns_base_addr __ro_after_init;
47 void __init exynos_sysram_init(void)
49 struct device_node *node;
51 for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
52 if (!of_device_is_available(node))
53 continue;
54 sysram_base_addr = of_iomap(node, 0);
55 break;
58 for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") {
59 if (!of_device_is_available(node))
60 continue;
61 sysram_ns_base_addr = of_iomap(node, 0);
62 break;
66 static void __init exynos_init_late(void)
68 if (of_machine_is_compatible("samsung,exynos5440"))
69 /* to be supported later */
70 return;
72 exynos_pm_init();
75 static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
76 int depth, void *data)
78 struct map_desc iodesc;
79 const __be32 *reg;
80 int len;
82 if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") &&
83 !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock"))
84 return 0;
86 reg = of_get_flat_dt_prop(node, "reg", &len);
87 if (reg == NULL || len != (sizeof(unsigned long) * 2))
88 return 0;
90 iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
91 iodesc.length = be32_to_cpu(reg[1]) - 1;
92 iodesc.virtual = (unsigned long)S5P_VA_CHIPID;
93 iodesc.type = MT_DEVICE;
94 iotable_init(&iodesc, 1);
95 return 1;
99 * exynos_map_io
101 * register the standard cpu IO areas
103 static void __init exynos_map_io(void)
105 if (soc_is_exynos4())
106 iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
109 static void __init exynos_init_io(void)
111 debug_ll_io_init();
113 of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
115 /* detect cpu id and rev. */
116 s5p_init_cpu(S5P_VA_CHIPID);
118 exynos_map_io();
122 * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
123 * and suspend.
125 * This is necessary only on Exynos4 SoCs. When system is running
126 * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
127 * feature could properly detect global idle state when secondary CPU is
128 * powered down.
130 * However this should not be set when such system is going into suspend.
132 void exynos_set_delayed_reset_assertion(bool enable)
134 if (of_machine_is_compatible("samsung,exynos4")) {
135 unsigned int tmp, core_id;
137 for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
138 tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
139 if (enable)
140 tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
141 else
142 tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
143 pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
149 * Apparently, these SoCs are not able to wake-up from suspend using
150 * the PMU. Too bad. Should they suddenly become capable of such a
151 * feat, the matches below should be moved to suspend.c.
153 static const struct of_device_id exynos_dt_pmu_match[] = {
154 { .compatible = "samsung,exynos5260-pmu" },
155 { .compatible = "samsung,exynos5410-pmu" },
156 { /*sentinel*/ },
159 static void exynos_map_pmu(void)
161 struct device_node *np;
163 np = of_find_matching_node(NULL, exynos_dt_pmu_match);
164 if (np)
165 pmu_base_addr = of_iomap(np, 0);
168 static void __init exynos_init_irq(void)
170 irqchip_init();
172 * Since platsmp.c needs pmu base address by the time
173 * DT is not unflatten so we can't use DT APIs before
174 * init_irq
176 exynos_map_pmu();
179 static void __init exynos_dt_machine_init(void)
182 * This is called from smp_prepare_cpus if we've built for SMP, but
183 * we still need to set it up for PM and firmware ops if not.
185 if (!IS_ENABLED(CONFIG_SMP))
186 exynos_sysram_init();
188 #if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
189 if (of_machine_is_compatible("samsung,exynos4210") ||
190 of_machine_is_compatible("samsung,exynos3250"))
191 exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
192 #endif
193 if (of_machine_is_compatible("samsung,exynos4210") ||
194 (of_machine_is_compatible("samsung,exynos4412") &&
195 of_machine_is_compatible("samsung,trats2")) ||
196 of_machine_is_compatible("samsung,exynos3250") ||
197 of_machine_is_compatible("samsung,exynos5250"))
198 platform_device_register(&exynos_cpuidle);
201 static char const *const exynos_dt_compat[] __initconst = {
202 "samsung,exynos3",
203 "samsung,exynos3250",
204 "samsung,exynos4",
205 "samsung,exynos4210",
206 "samsung,exynos4412",
207 "samsung,exynos5",
208 "samsung,exynos5250",
209 "samsung,exynos5260",
210 "samsung,exynos5420",
211 "samsung,exynos5440",
212 NULL
215 static void __init exynos_dt_fixup(void)
218 * Some versions of uboot pass garbage entries in the memory node,
219 * use the old CONFIG_ARM_NR_BANKS
221 of_fdt_limit_memory(8);
224 DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
225 /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
226 /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
227 .l2c_aux_val = 0x3c400001,
228 .l2c_aux_mask = 0xc20fffff,
229 .smp = smp_ops(exynos_smp_ops),
230 .map_io = exynos_init_io,
231 .init_early = exynos_firmware_init,
232 .init_irq = exynos_init_irq,
233 .init_machine = exynos_dt_machine_init,
234 .init_late = exynos_init_late,
235 .dt_compat = exynos_dt_compat,
236 .dt_fixup = exynos_dt_fixup,
237 MACHINE_END