2 * arch/arm/mach-ks8695/include/mach/regs-uart.h
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
7 * KS8695 - UART register and bit definitions.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
17 #define KS8695_UART_OFFSET (0xF0000 + 0xE000)
18 #define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
19 #define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
25 #define KS8695_URRB (0x00) /* Receive Buffer Register */
26 #define KS8695_URTH (0x04) /* Transmit Holding Register */
27 #define KS8695_URFC (0x08) /* FIFO Control Register */
28 #define KS8695_URLC (0x0C) /* Line Control Register */
29 #define KS8695_URMC (0x10) /* Modem Control Register */
30 #define KS8695_URLS (0x14) /* Line Status Register */
31 #define KS8695_URMS (0x18) /* Modem Status Register */
32 #define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
33 #define KS8695_USR (0x20) /* Status Register */
36 /* FIFO Control Register */
37 #define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
38 #define URFC_URFRT_1 (0 << 6)
39 #define URFC_URFRT_4 (1 << 6)
40 #define URFC_URFRT_8 (2 << 6)
41 #define URFC_URFRT_14 (3 << 6)
42 #define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
43 #define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
44 #define URFC_URFE (1 << 0) /* FIFO Enable */
46 /* Line Control Register */
47 #define URLC_URSBC (1 << 6) /* Set Break Condition */
48 #define URLC_PARITY (7 << 3) /* Parity */
49 #define URPE_NONE (0 << 3)
50 #define URPE_ODD (1 << 3)
51 #define URPE_EVEN (3 << 3)
52 #define URPE_MARK (5 << 3)
53 #define URPE_SPACE (7 << 3)
54 #define URLC_URSB (1 << 2) /* Stop Bits */
55 #define URLC_URCL (3 << 0) /* Character Length */
56 #define URCL_5 (0 << 0)
57 #define URCL_6 (1 << 0)
58 #define URCL_7 (2 << 0)
59 #define URCL_8 (3 << 0)
61 /* Modem Control Register */
62 #define URMC_URLB (1 << 4) /* Loop-back mode */
63 #define URMC_UROUT2 (1 << 3) /* OUT2 signal */
64 #define URMC_UROUT1 (1 << 2) /* OUT1 signal */
65 #define URMC_URRTS (1 << 1) /* Request to Send */
66 #define URMC_URDTR (1 << 0) /* Data Terminal Ready */
68 /* Line Status Register */
69 #define URLS_URRFE (1 << 7) /* Receive FIFO Error */
70 #define URLS_URTE (1 << 6) /* Transmit Empty */
71 #define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
72 #define URLS_URBI (1 << 4) /* Break Interrupt */
73 #define URLS_URFE (1 << 3) /* Framing Error */
74 #define URLS_URPE (1 << 2) /* Parity Error */
75 #define URLS_URROE (1 << 1) /* Receive Overrun Error */
76 #define URLS_URDR (1 << 0) /* Receive Data Ready */
78 /* Modem Status Register */
79 #define URMS_URDCD (1 << 7) /* Data Carrier Detect */
80 #define URMS_URRI (1 << 6) /* Ring Indicator */
81 #define URMS_URDSR (1 << 5) /* Data Set Ready */
82 #define URMS_URCTS (1 << 4) /* Clear to Send */
83 #define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
84 #define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
85 #define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
86 #define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
89 #define USR_UTI (1 << 0) /* Timeout Indication */