arch/arm/mach-mmp/pxa910.c

   1 /*
   2  *  linux/arch/arm/mach-mmp/pxa910.c
   3  *
   4  *  Code specific to PXA910
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/clk/mmp.h>
  11 #include <linux/module.h>
  12 #include <linux/kernel.h>
  13 #include <linux/init.h>
  14 #include <linux/list.h>
  15 #include <linux/io.h>
  16 #include <linux/irq.h>
  17 #include <linux/irqchip/mmp.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <asm/hardware/cache-tauros2.h>
  21 #include <asm/mach/time.h>
  22 #include "addr-map.h"
  23 #include "regs-apbc.h"
  24 #include "cputype.h"
  25 #include "irqs.h"
  26 #include "mfp.h"
  27 #include "devices.h"
  28 #include "pm-pxa910.h"
  29 #include "pxa910.h"
  30
  31 #include "common.h"
  32
  33 #define MFPR_VIRT_BASE  (APB_VIRT_BASE + 0x1e000)
  34
  35 static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
  36 {
  37         MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
  38         MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
  39         MFP_ADDR_X(GPIO100, GPIO109, 0x238),
  40
  41         MFP_ADDR(GPIO123, 0xcc),
  42         MFP_ADDR(GPIO124, 0xd0),
  43
  44         MFP_ADDR(DF_IO0, 0x40),
  45         MFP_ADDR(DF_IO1, 0x3c),
  46         MFP_ADDR(DF_IO2, 0x38),
  47         MFP_ADDR(DF_IO3, 0x34),
  48         MFP_ADDR(DF_IO4, 0x30),
  49         MFP_ADDR(DF_IO5, 0x2c),
  50         MFP_ADDR(DF_IO6, 0x28),
  51         MFP_ADDR(DF_IO7, 0x24),
  52         MFP_ADDR(DF_IO8, 0x20),
  53         MFP_ADDR(DF_IO9, 0x1c),
  54         MFP_ADDR(DF_IO10, 0x18),
  55         MFP_ADDR(DF_IO11, 0x14),
  56         MFP_ADDR(DF_IO12, 0x10),
  57         MFP_ADDR(DF_IO13, 0xc),
  58         MFP_ADDR(DF_IO14, 0x8),
  59         MFP_ADDR(DF_IO15, 0x4),
  60
  61         MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
  62         MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
  63         MFP_ADDR(SM_nCS0, 0x4c),
  64         MFP_ADDR(SM_nCS1, 0x50),
  65         MFP_ADDR(DF_WEn, 0x54),
  66         MFP_ADDR(DF_REn, 0x58),
  67         MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
  68         MFP_ADDR(DF_ALE_SM_WEn, 0x60),
  69         MFP_ADDR(SM_SCLK, 0x64),
  70         MFP_ADDR(DF_RDY0, 0x68),
  71         MFP_ADDR(SM_BE0, 0x6c),
  72         MFP_ADDR(SM_BE1, 0x70),
  73         MFP_ADDR(SM_ADV, 0x74),
  74         MFP_ADDR(DF_RDY1, 0x78),
  75         MFP_ADDR(SM_ADVMUX, 0x7c),
  76         MFP_ADDR(SM_RDY, 0x80),
  77
  78         MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
  79
  80         MFP_ADDR_END,
  81 };
  82
  83 void __init pxa910_init_irq(void)
  84 {
  85         icu_init_irq();
  86 #ifdef CONFIG_PM
  87         icu_irq_chip.irq_set_wake = pxa910_set_wake;
  88 #endif
  89 }
  90
  91 static int __init pxa910_init(void)
  92 {
  93         if (cpu_is_pxa910()) {
  94 #ifdef CONFIG_CACHE_TAUROS2
  95                 tauros2_init(0);
  96 #endif
  97                 mfp_init_base(MFPR_VIRT_BASE);
  98                 mfp_init_addr(pxa910_mfp_addr_map);
  99                 pxa910_clk_init(APB_PHYS_BASE + 0x50000,
 100                                 AXI_PHYS_BASE + 0x82800,
 101                                 APB_PHYS_BASE + 0x15000,
 102                                 APB_PHYS_BASE + 0x3b000);
 103         }
 104
 105         return 0;
 106 }
 107 postcore_initcall(pxa910_init);
 108
 109 /* system timer - clock enabled, 3.25MHz */
 110 #define TIMER_CLK_RST   (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
 111 #define APBC_TIMERS     APBC_REG(0x34)
 112
 113 void __init pxa910_timer_init(void)
 114 {
 115         /* reset and configure */
 116         __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 117         __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 118
 119         timer_init(IRQ_PXA910_AP1_TIMER1);
 120 }
 121
 122 /* on-chip devices */
 123
 124 /* NOTE: there are totally 3 UARTs on PXA910:
 125  *
 126  *   UART1   - Slow UART (can be used both by AP and CP)
 127  *   UART2/3 - Fast UART
 128  *
 129  * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
 130  * they are re-ordered as:
 131  *
 132  *   pxa910_device_uart1 - UART2 as FFUART
 133  *   pxa910_device_uart2 - UART3 as BTUART
 134  *
 135  * UART1 is not used by AP for the moment.
 136  */
 137 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
 138 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
 139 PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
 140 PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
 141 PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
 142 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
 143 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 144 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
 145 PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
 146 PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
 147 PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
 148 PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
 149
 150 struct resource pxa910_resource_gpio[] = {
 151         {
 152                 .start  = 0xd4019000,
 153                 .end    = 0xd4019fff,
 154                 .flags  = IORESOURCE_MEM,
 155         }, {
 156                 .start  = IRQ_PXA910_AP_GPIO,
 157                 .end    = IRQ_PXA910_AP_GPIO,
 158                 .name   = "gpio_mux",
 159                 .flags  = IORESOURCE_IRQ,
 160         },
 161 };
 162
 163 struct platform_device pxa910_device_gpio = {
 164         .name           = "mmp-gpio",
 165         .id             = -1,
 166         .num_resources  = ARRAY_SIZE(pxa910_resource_gpio),
 167         .resource       = pxa910_resource_gpio,
 168 };
 169
 170 static struct resource pxa910_resource_rtc[] = {
 171         {
 172                 .start  = 0xd4010000,
 173                 .end    = 0xd401003f,
 174                 .flags  = IORESOURCE_MEM,
 175         }, {
 176                 .start  = IRQ_PXA910_RTC_INT,
 177                 .end    = IRQ_PXA910_RTC_INT,
 178                 .name   = "rtc 1Hz",
 179                 .flags  = IORESOURCE_IRQ,
 180         }, {
 181                 .start  = IRQ_PXA910_RTC_ALARM,
 182                 .end    = IRQ_PXA910_RTC_ALARM,
 183                 .name   = "rtc alarm",
 184                 .flags  = IORESOURCE_IRQ,
 185         },
 186 };
 187
 188 struct platform_device pxa910_device_rtc = {
 189         .name           = "sa1100-rtc",
 190         .id             = -1,
 191         .num_resources  = ARRAY_SIZE(pxa910_resource_rtc),
 192         .resource       = pxa910_resource_rtc,
 193 };