arch/arm/mach-sa1100/nanoengine.c

   1 /*
   2  * linux/arch/arm/mach-sa1100/nanoengine.c
   3  *
   4  * Bright Star Engineering's nanoEngine board init code.
   5  *
   6  * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12  */
  13
  14 #include <linux/init.h>
  15 #include <linux/kernel.h>
  16 #include <linux/platform_data/sa11x0-serial.h>
  17 #include <linux/mtd/mtd.h>
  18 #include <linux/mtd/partitions.h>
  19 #include <linux/root_dev.h>
  20
  21 #include <asm/mach-types.h>
  22 #include <asm/setup.h>
  23 #include <asm/page.h>
  24
  25 #include <asm/mach/arch.h>
  26 #include <asm/mach/flash.h>
  27 #include <asm/mach/map.h>
  28
  29 #include <mach/hardware.h>
  30 #include <mach/nanoengine.h>
  31 #include <mach/irqs.h>
  32
  33 #include "generic.h"
  34
  35 /* Flash bank 0 */
  36 static struct mtd_partition nanoengine_partitions[] = {
  37         {
  38                 .name   = "nanoEngine boot firmware and parameter table",
  39                 .size           = 0x00010000,  /* 32K */
  40                 .offset         = 0,
  41                 .mask_flags     = MTD_WRITEABLE,
  42         }, {
  43                 .name           = "kernel/initrd reserved",
  44                 .size           = 0x002f0000,
  45                 .offset         = 0x00010000,
  46                 .mask_flags     = MTD_WRITEABLE,
  47         }, {
  48                 .name           = "experimental filesystem allocation",
  49                 .size           = 0x00100000,
  50                 .offset         = 0x00300000,
  51                 .mask_flags     = MTD_WRITEABLE,
  52         }
  53 };
  54
  55 static struct flash_platform_data nanoengine_flash_data = {
  56         .map_name       = "jedec_probe",
  57         .parts          = nanoengine_partitions,
  58         .nr_parts       = ARRAY_SIZE(nanoengine_partitions),
  59 };
  60
  61 static struct resource nanoengine_flash_resources[] = {
  62         DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
  63         DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
  64 };
  65
  66 static struct map_desc nanoengine_io_desc[] __initdata = {
  67         {
  68                 /* System Registers */
  69                 .virtual        = 0xf0000000,
  70                 .pfn            = __phys_to_pfn(0x10000000),
  71                 .length         = 0x00100000,
  72                 .type           = MT_DEVICE
  73         }, {
  74                 /* Internal PCI Memory Read/Write */
  75                 .virtual        = NANO_PCI_MEM_RW_VIRT,
  76                 .pfn            = __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
  77                 .length         = NANO_PCI_MEM_RW_SIZE,
  78                 .type           = MT_DEVICE
  79         }, {
  80                 /* Internal PCI Config Space */
  81                 .virtual        = NANO_PCI_CONFIG_SPACE_VIRT,
  82                 .pfn            = __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
  83                 .length         = NANO_PCI_CONFIG_SPACE_SIZE,
  84                 .type           = MT_DEVICE
  85         }
  86 };
  87
  88 static void __init nanoengine_map_io(void)
  89 {
  90         sa1100_map_io();
  91         iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
  92
  93         sa1100_register_uart(0, 1);
  94         sa1100_register_uart(1, 2);
  95         sa1100_register_uart(2, 3);
  96         Ser1SDCR0 |= SDCR0_UART;
  97         /* disable IRDA -- UART2 is used as a normal serial port */
  98         Ser2UTCR4 = 0;
  99         Ser2HSCR0 = 0;
 100 }
 101
 102 static void __init nanoengine_init(void)
 103 {
 104         sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
 105                 ARRAY_SIZE(nanoengine_flash_resources));
 106 }
 107
 108 MACHINE_START(NANOENGINE, "BSE nanoEngine")
 109         .atag_offset    = 0x100,
 110         .map_io         = nanoengine_map_io,
 111         .nr_irqs        = SA1100_NR_IRQS,
 112         .init_irq       = sa1100_init_irq,
 113         .init_time      = sa1100_timer_init,
 114         .init_machine   = nanoengine_init,
 115         .init_late      = sa11x0_init_late,
 116         .restart        = sa11x0_restart,
 117 MACHINE_END