2 TDA10021 - Single Chip Cable Channel Receiver driver module
3 used on the Siemens DVB-C cards
5 Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
6 Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/string.h>
30 #include <linux/slab.h>
32 #include "dvb_frontend.h"
36 struct tda10021_state
{
37 struct i2c_adapter
* i2c
;
38 /* configuration settings */
39 const struct tda1002x_config
* config
;
40 struct dvb_frontend frontend
;
48 #define dprintk(x...) printk(x)
55 #define XIN 57840000UL
57 #define FIN (XIN >> 4)
59 static int tda10021_inittab_size
= 0x40;
60 static u8 tda10021_inittab
[0x40]=
62 0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
63 0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
64 0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
65 0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
66 0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
67 0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
68 0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
69 0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
72 static int _tda10021_writereg (struct tda10021_state
* state
, u8 reg
, u8 data
)
74 u8 buf
[] = { reg
, data
};
75 struct i2c_msg msg
= { .addr
= state
->config
->demod_address
, .flags
= 0, .buf
= buf
, .len
= 2 };
78 ret
= i2c_transfer (state
->i2c
, &msg
, 1);
80 printk("DVB: TDA10021(%d): %s, writereg error "
81 "(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
82 state
->frontend
.dvb
->num
, __func__
, reg
, data
, ret
);
85 return (ret
!= 1) ? -EREMOTEIO
: 0;
88 static u8
tda10021_readreg (struct tda10021_state
* state
, u8 reg
)
92 struct i2c_msg msg
[] = { { .addr
= state
->config
->demod_address
, .flags
= 0, .buf
= b0
, .len
= 1 },
93 { .addr
= state
->config
->demod_address
, .flags
= I2C_M_RD
, .buf
= b1
, .len
= 1 } };
96 ret
= i2c_transfer (state
->i2c
, msg
, 2);
97 // Don't print an error message if the id is read.
98 if (ret
!= 2 && reg
!= 0x1a)
99 printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
104 //get access to tuner
105 static int lock_tuner(struct tda10021_state
* state
)
107 u8 buf
[2] = { 0x0f, tda10021_inittab
[0x0f] | 0x80 };
108 struct i2c_msg msg
= {.addr
=state
->config
->demod_address
, .flags
=0, .buf
=buf
, .len
=2};
110 if(i2c_transfer(state
->i2c
, &msg
, 1) != 1)
112 printk("tda10021: lock tuner fails\n");
118 //release access from tuner
119 static int unlock_tuner(struct tda10021_state
* state
)
121 u8 buf
[2] = { 0x0f, tda10021_inittab
[0x0f] & 0x7f };
122 struct i2c_msg msg_post
={.addr
=state
->config
->demod_address
, .flags
=0, .buf
=buf
, .len
=2};
124 if(i2c_transfer(state
->i2c
, &msg_post
, 1) != 1)
126 printk("tda10021: unlock tuner fails\n");
132 static int tda10021_setup_reg0(struct tda10021_state
*state
, u8 reg0
,
133 enum fe_spectral_inversion inversion
)
135 reg0
|= state
->reg0
& 0x63;
137 if ((INVERSION_ON
== inversion
) ^ (state
->config
->invert
== 0))
142 _tda10021_writereg (state
, 0x00, reg0
& 0xfe);
143 _tda10021_writereg (state
, 0x00, reg0
| 0x01);
149 static int tda10021_set_symbolrate (struct tda10021_state
* state
, u32 symbolrate
)
157 if (symbolrate
> XIN
/2)
159 if (symbolrate
< 500000)
162 if (symbolrate
< XIN
/16) NDEC
= 1;
163 if (symbolrate
< XIN
/32) NDEC
= 2;
164 if (symbolrate
< XIN
/64) NDEC
= 3;
166 if (symbolrate
< (u32
)(XIN
/12.3)) SFIL
= 1;
167 if (symbolrate
< (u32
)(XIN
/16)) SFIL
= 0;
168 if (symbolrate
< (u32
)(XIN
/24.6)) SFIL
= 1;
169 if (symbolrate
< (u32
)(XIN
/32)) SFIL
= 0;
170 if (symbolrate
< (u32
)(XIN
/49.2)) SFIL
= 1;
171 if (symbolrate
< (u32
)(XIN
/64)) SFIL
= 0;
172 if (symbolrate
< (u32
)(XIN
/98.4)) SFIL
= 1;
175 ratio
= (symbolrate
<< 4) / FIN
;
176 tmp
= ((symbolrate
<< 4) % FIN
) << 8;
177 ratio
= (ratio
<< 8) + tmp
/ FIN
;
178 tmp
= (tmp
% FIN
) << 8;
179 ratio
= (ratio
<< 8) + DIV_ROUND_CLOSEST(tmp
, FIN
);
182 BDRI
= (((XIN
<< 5) / symbolrate
) + 1) / 2;
187 SFIL
= (SFIL
<< 4) | tda10021_inittab
[0x0E];
189 NDEC
= (NDEC
<< 6) | tda10021_inittab
[0x03];
191 _tda10021_writereg (state
, 0x03, NDEC
);
192 _tda10021_writereg (state
, 0x0a, BDR
&0xff);
193 _tda10021_writereg (state
, 0x0b, (BDR
>> 8)&0xff);
194 _tda10021_writereg (state
, 0x0c, (BDR
>>16)&0x3f);
196 _tda10021_writereg (state
, 0x0d, BDRI
);
197 _tda10021_writereg (state
, 0x0e, SFIL
);
202 static int tda10021_init (struct dvb_frontend
*fe
)
204 struct tda10021_state
* state
= fe
->demodulator_priv
;
207 dprintk("DVB: TDA10021(%d): init chip\n", fe
->adapter
->num
);
209 //_tda10021_writereg (fe, 0, 0);
211 for (i
=0; i
<tda10021_inittab_size
; i
++)
212 _tda10021_writereg (state
, i
, tda10021_inittab
[i
]);
214 _tda10021_writereg (state
, 0x34, state
->pwm
);
217 //0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
218 //0x2A[4] == BYPPLL -> Power down mode (default 1)
219 //0x2A[5] == LCK -> PLL Lock Flag
220 //0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
223 _tda10021_writereg(state
, 0x2a, tda10021_inittab
[0x2a] & 0xef);
228 u8 conf
, agcref
, lthr
, mseth
, aref
;
231 static int tda10021_set_parameters(struct dvb_frontend
*fe
)
233 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
234 u32 delsys
= c
->delivery_system
;
235 unsigned qam
= c
->modulation
;
238 struct tda10021_state
* state
= fe
->demodulator_priv
;
239 static const struct qam_params qam_params
[] = {
240 /* Modulation Conf AGCref LTHR MSETH AREF */
241 [QPSK
] = { 0x14, 0x78, 0x78, 0x8c, 0x96 },
242 [QAM_16
] = { 0x00, 0x8c, 0x87, 0xa2, 0x91 },
243 [QAM_32
] = { 0x04, 0x8c, 0x64, 0x74, 0x96 },
244 [QAM_64
] = { 0x08, 0x6a, 0x46, 0x43, 0x6a },
245 [QAM_128
] = { 0x0c, 0x78, 0x36, 0x34, 0x7e },
246 [QAM_256
] = { 0x10, 0x5c, 0x26, 0x23, 0x6b },
250 case SYS_DVBC_ANNEX_A
:
253 case SYS_DVBC_ANNEX_C
:
261 * gcc optimizes the code below the same way as it would code:
262 * "if (qam > 5) return -EINVAL;"
263 * Yet, the code is clearer, as it shows what QAM standards are
264 * supported by the driver, and avoids the usage of magic numbers on
279 if (c
->inversion
!= INVERSION_ON
&& c
->inversion
!= INVERSION_OFF
)
282 /*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
284 if (fe
->ops
.tuner_ops
.set_params
) {
285 fe
->ops
.tuner_ops
.set_params(fe
);
286 if (fe
->ops
.i2c_gate_ctrl
) fe
->ops
.i2c_gate_ctrl(fe
, 0);
289 tda10021_set_symbolrate(state
, c
->symbol_rate
);
290 _tda10021_writereg(state
, 0x34, state
->pwm
);
292 _tda10021_writereg(state
, 0x01, qam_params
[qam
].agcref
);
293 _tda10021_writereg(state
, 0x05, qam_params
[qam
].lthr
);
294 _tda10021_writereg(state
, 0x08, qam_params
[qam
].mseth
);
295 _tda10021_writereg(state
, 0x09, qam_params
[qam
].aref
);
298 * Bit 0 == 0 means roll-off = 0.15 (Annex A)
299 * == 1 means roll-off = 0.13 (Annex C)
301 reg0x3d
= tda10021_readreg (state
, 0x3d);
303 _tda10021_writereg (state
, 0x3d, 0x01 | reg0x3d
);
305 _tda10021_writereg (state
, 0x3d, 0xfe & reg0x3d
);
306 tda10021_setup_reg0(state
, qam_params
[qam
].conf
, c
->inversion
);
311 static int tda10021_read_status(struct dvb_frontend
*fe
,
312 enum fe_status
*status
)
314 struct tda10021_state
* state
= fe
->demodulator_priv
;
318 //0x11[0] == EQALGO -> Equalizer algorithms state
319 //0x11[1] == CARLOCK -> Carrier locked
320 //0x11[2] == FSYNC -> Frame synchronisation
321 //0x11[3] == FEL -> Front End locked
322 //0x11[6] == NODVB -> DVB Mode Information
323 sync
= tda10021_readreg (state
, 0x11);
326 *status
|= FE_HAS_SIGNAL
|FE_HAS_CARRIER
;
329 *status
|= FE_HAS_SYNC
|FE_HAS_VITERBI
;
332 *status
|= FE_HAS_LOCK
;
337 static int tda10021_read_ber(struct dvb_frontend
* fe
, u32
* ber
)
339 struct tda10021_state
* state
= fe
->demodulator_priv
;
341 u32 _ber
= tda10021_readreg(state
, 0x14) |
342 (tda10021_readreg(state
, 0x15) << 8) |
343 ((tda10021_readreg(state
, 0x16) & 0x0f) << 16);
344 _tda10021_writereg(state
, 0x10, (tda10021_readreg(state
, 0x10) & ~0xc0)
345 | (tda10021_inittab
[0x10] & 0xc0));
351 static int tda10021_read_signal_strength(struct dvb_frontend
* fe
, u16
* strength
)
353 struct tda10021_state
* state
= fe
->demodulator_priv
;
355 u8 config
= tda10021_readreg(state
, 0x02);
356 u8 gain
= tda10021_readreg(state
, 0x17);
358 /* the agc value is inverted */
360 *strength
= (gain
<< 8) | gain
;
365 static int tda10021_read_snr(struct dvb_frontend
* fe
, u16
* snr
)
367 struct tda10021_state
* state
= fe
->demodulator_priv
;
369 u8 quality
= ~tda10021_readreg(state
, 0x18);
370 *snr
= (quality
<< 8) | quality
;
375 static int tda10021_read_ucblocks(struct dvb_frontend
* fe
, u32
* ucblocks
)
377 struct tda10021_state
* state
= fe
->demodulator_priv
;
379 *ucblocks
= tda10021_readreg (state
, 0x13) & 0x7f;
380 if (*ucblocks
== 0x7f)
381 *ucblocks
= 0xffffffff;
383 /* reset uncorrected block counter */
384 _tda10021_writereg (state
, 0x10, tda10021_inittab
[0x10] & 0xdf);
385 _tda10021_writereg (state
, 0x10, tda10021_inittab
[0x10]);
390 static int tda10021_get_frontend(struct dvb_frontend
*fe
)
392 struct dtv_frontend_properties
*p
= &fe
->dtv_property_cache
;
393 struct tda10021_state
* state
= fe
->demodulator_priv
;
397 sync
= tda10021_readreg(state
, 0x11);
398 afc
= tda10021_readreg(state
, 0x19);
400 /* AFC only valid when carrier has been recovered */
401 printk(sync
& 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
402 "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
403 state
->frontend
.dvb
->num
, afc
,
404 -((s32
)p
->symbol_rate
* afc
) >> 10);
407 p
->inversion
= ((state
->reg0
& 0x20) == 0x20) ^ (state
->config
->invert
!= 0) ? INVERSION_ON
: INVERSION_OFF
;
408 p
->modulation
= ((state
->reg0
>> 2) & 7) + QAM_16
;
410 p
->fec_inner
= FEC_NONE
;
411 p
->frequency
= ((p
->frequency
+ 31250) / 62500) * 62500;
414 p
->frequency
-= ((s32
)p
->symbol_rate
* afc
) >> 10;
419 static int tda10021_i2c_gate_ctrl(struct dvb_frontend
* fe
, int enable
)
421 struct tda10021_state
* state
= fe
->demodulator_priv
;
431 static int tda10021_sleep(struct dvb_frontend
* fe
)
433 struct tda10021_state
* state
= fe
->demodulator_priv
;
435 _tda10021_writereg (state
, 0x1b, 0x02); /* pdown ADC */
436 _tda10021_writereg (state
, 0x00, 0x80); /* standby */
441 static void tda10021_release(struct dvb_frontend
* fe
)
443 struct tda10021_state
* state
= fe
->demodulator_priv
;
447 static struct dvb_frontend_ops tda10021_ops
;
449 struct dvb_frontend
* tda10021_attach(const struct tda1002x_config
* config
,
450 struct i2c_adapter
* i2c
,
453 struct tda10021_state
* state
= NULL
;
456 /* allocate memory for the internal state */
457 state
= kzalloc(sizeof(struct tda10021_state
), GFP_KERNEL
);
458 if (state
== NULL
) goto error
;
460 /* setup the state */
461 state
->config
= config
;
464 state
->reg0
= tda10021_inittab
[0];
466 /* check if the demod is there */
467 id
= tda10021_readreg(state
, 0x1a);
468 if ((id
& 0xf0) != 0x70) goto error
;
470 /* Don't claim TDA10023 */
474 printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
475 state
->config
->demod_address
, id
);
477 /* create dvb_frontend */
478 memcpy(&state
->frontend
.ops
, &tda10021_ops
, sizeof(struct dvb_frontend_ops
));
479 state
->frontend
.demodulator_priv
= state
;
480 return &state
->frontend
;
487 static struct dvb_frontend_ops tda10021_ops
= {
488 .delsys
= { SYS_DVBC_ANNEX_A
, SYS_DVBC_ANNEX_C
},
490 .name
= "Philips TDA10021 DVB-C",
491 .frequency_stepsize
= 62500,
492 .frequency_min
= 47000000,
493 .frequency_max
= 862000000,
494 .symbol_rate_min
= (XIN
/2)/64, /* SACLK/64 == (XIN/2)/64 */
495 .symbol_rate_max
= (XIN
/2)/4, /* SACLK/4 */
497 .frequency_tolerance
= ???,
498 .symbol_rate_tolerance
= ???, /* ppm */ /* == 8% (spec p. 5) */
500 .caps
= 0x400 | //FE_CAN_QAM_4
501 FE_CAN_QAM_16
| FE_CAN_QAM_32
| FE_CAN_QAM_64
|
502 FE_CAN_QAM_128
| FE_CAN_QAM_256
|
506 .release
= tda10021_release
,
508 .init
= tda10021_init
,
509 .sleep
= tda10021_sleep
,
510 .i2c_gate_ctrl
= tda10021_i2c_gate_ctrl
,
512 .set_frontend
= tda10021_set_parameters
,
513 .get_frontend
= tda10021_get_frontend
,
515 .read_status
= tda10021_read_status
,
516 .read_ber
= tda10021_read_ber
,
517 .read_signal_strength
= tda10021_read_signal_strength
,
518 .read_snr
= tda10021_read_snr
,
519 .read_ucblocks
= tda10021_read_ucblocks
,
522 module_param(verbose
, int, 0644);
523 MODULE_PARM_DESC(verbose
, "print AFC offset after tuning for debugging the PWM setting");
525 MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
526 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
527 MODULE_LICENSE("GPL");
529 EXPORT_SYMBOL(tda10021_attach
);