s390/ptrace: get rid of long longs in psw_bits

[linux/fpc-iii.git] / drivers / acpi / acpica / dbxface.c

/*******************************************************************************
 *
 * Module Name: dbxface - AML Debugger external interfaces
 *
 ******************************************************************************/

/*
 * Copyright (C) 2000 - 2015, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "amlcode.h"
#include "acdebug.h"

#define _COMPONENT          ACPI_CA_DEBUGGER
ACPI_MODULE_NAME("dbxface")

/* Local prototypes */
static acpi_status
acpi_db_start_command(struct acpi_walk_state *walk_state,
                      union acpi_parse_object *op);

#ifdef ACPI_OBSOLETE_FUNCTIONS
void acpi_db_method_end(struct acpi_walk_state *walk_state);
#endif

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_start_command
 *
 * PARAMETERS:  walk_state      - Current walk
 *              op              - Current executing Op, from AML interpreter
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enter debugger command loop
 *
 ******************************************************************************/

static acpi_status
acpi_db_start_command(struct acpi_walk_state *walk_state,
                      union acpi_parse_object *op)
{
        acpi_status status;

        /* TBD: [Investigate] are there namespace locking issues here? */

        /* acpi_ut_release_mutex (ACPI_MTX_NAMESPACE); */

        /* Go into the command loop and await next user command */

        acpi_gbl_method_executing = TRUE;
        status = AE_CTRL_TRUE;
        while (status == AE_CTRL_TRUE) {
                if (acpi_gbl_debugger_configuration == DEBUGGER_MULTI_THREADED) {

                        /* Handshake with the front-end that gets user command lines */

                        acpi_os_release_mutex(acpi_gbl_db_command_complete);

                        status =
                            acpi_os_acquire_mutex(acpi_gbl_db_command_ready,
                                                  ACPI_WAIT_FOREVER);
                        if (ACPI_FAILURE(status)) {
                                return (status);
                        }
                } else {
                        /* Single threaded, we must get a command line ourselves */

                        /* Force output to console until a command is entered */

                        acpi_db_set_output_destination(ACPI_DB_CONSOLE_OUTPUT);

                        /* Different prompt if method is executing */

                        if (!acpi_gbl_method_executing) {
                                acpi_os_printf("%1c ",
                                               ACPI_DEBUGGER_COMMAND_PROMPT);
                        } else {
                                acpi_os_printf("%1c ",
                                               ACPI_DEBUGGER_EXECUTE_PROMPT);
                        }

                        /* Get the user input line */

                        status = acpi_os_get_line(acpi_gbl_db_line_buf,
                                                  ACPI_DB_LINE_BUFFER_SIZE,
                                                  NULL);
                        if (ACPI_FAILURE(status)) {
                                ACPI_EXCEPTION((AE_INFO, status,
                                                "While parsing command line"));
                                return (status);
                        }
                }

                status =
                    acpi_db_command_dispatch(acpi_gbl_db_line_buf, walk_state,
                                             op);
        }

        /* acpi_ut_acquire_mutex (ACPI_MTX_NAMESPACE); */

        return (status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_db_single_step
 *
 * PARAMETERS:  walk_state      - Current walk
 *              op              - Current executing op (from aml interpreter)
 *              opcode_class    - Class of the current AML Opcode
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Called just before execution of an AML opcode.
 *
 ******************************************************************************/

acpi_status
acpi_db_single_step(struct acpi_walk_state * walk_state,
                    union acpi_parse_object * op, u32 opcode_class)
{
        union acpi_parse_object *next;
        acpi_status status = AE_OK;
        u32 original_debug_level;
        union acpi_parse_object *display_op;
        union acpi_parse_object *parent_op;
        u32 aml_offset;

        ACPI_FUNCTION_ENTRY();

#ifndef ACPI_APPLICATION
        if (acpi_gbl_db_thread_id != acpi_os_get_thread_id()) {
                return (AE_OK);
        }
#endif

        /* Check the abort flag */

        if (acpi_gbl_abort_method) {
                acpi_gbl_abort_method = FALSE;
                return (AE_ABORT_METHOD);
        }

        aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
                                        walk_state->parser_state.aml_start);

        /* Check for single-step breakpoint */

        if (walk_state->method_breakpoint &&
            (walk_state->method_breakpoint <= aml_offset)) {

                /* Check if the breakpoint has been reached or passed */
                /* Hit the breakpoint, resume single step, reset breakpoint */

                acpi_os_printf("***Break*** at AML offset %X\n", aml_offset);
                acpi_gbl_cm_single_step = TRUE;
                acpi_gbl_step_to_next_call = FALSE;
                walk_state->method_breakpoint = 0;
        }

        /* Check for user breakpoint (Must be on exact Aml offset) */

        else if (walk_state->user_breakpoint &&
                 (walk_state->user_breakpoint == aml_offset)) {
                acpi_os_printf("***UserBreakpoint*** at AML offset %X\n",
                               aml_offset);
                acpi_gbl_cm_single_step = TRUE;
                acpi_gbl_step_to_next_call = FALSE;
                walk_state->method_breakpoint = 0;
        }

        /*
         * Check if this is an opcode that we are interested in --
         * namely, opcodes that have arguments
         */
        if (op->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
                return (AE_OK);
        }

        switch (opcode_class) {
        case AML_CLASS_UNKNOWN:
        case AML_CLASS_ARGUMENT:        /* constants, literals, etc. do nothing */

                return (AE_OK);

        default:

                /* All other opcodes -- continue */
                break;
        }

        /*
         * Under certain debug conditions, display this opcode and its operands
         */
        if ((acpi_gbl_db_output_to_file) ||
            (acpi_gbl_cm_single_step) || (acpi_dbg_level & ACPI_LV_PARSE)) {
                if ((acpi_gbl_db_output_to_file) ||
                    (acpi_dbg_level & ACPI_LV_PARSE)) {
                        acpi_os_printf
                            ("\n[AmlDebug] Next AML Opcode to execute:\n");
                }

                /*
                 * Display this op (and only this op - zero out the NEXT field
                 * temporarily, and disable parser trace output for the duration of
                 * the display because we don't want the extraneous debug output)
                 */
                original_debug_level = acpi_dbg_level;
                acpi_dbg_level &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS);
                next = op->common.next;
                op->common.next = NULL;

                display_op = op;
                parent_op = op->common.parent;
                if (parent_op) {
                        if ((walk_state->control_state) &&
                            (walk_state->control_state->common.state ==
                             ACPI_CONTROL_PREDICATE_EXECUTING)) {
                                /*
                                 * We are executing the predicate of an IF or WHILE statement
                                 * Search upwards for the containing IF or WHILE so that the
                                 * entire predicate can be displayed.
                                 */
                                while (parent_op) {
                                        if ((parent_op->common.aml_opcode ==
                                             AML_IF_OP)
                                            || (parent_op->common.aml_opcode ==
                                                AML_WHILE_OP)) {
                                                display_op = parent_op;
                                                break;
                                        }
                                        parent_op = parent_op->common.parent;
                                }
                        } else {
                                while (parent_op) {
                                        if ((parent_op->common.aml_opcode ==
                                             AML_IF_OP)
                                            || (parent_op->common.aml_opcode ==
                                                AML_ELSE_OP)
                                            || (parent_op->common.aml_opcode ==
                                                AML_SCOPE_OP)
                                            || (parent_op->common.aml_opcode ==
                                                AML_METHOD_OP)
                                            || (parent_op->common.aml_opcode ==
                                                AML_WHILE_OP)) {
                                                break;
                                        }
                                        display_op = parent_op;
                                        parent_op = parent_op->common.parent;
                                }
                        }
                }

                /* Now we can display it */

#ifdef ACPI_DISASSEMBLER
                acpi_dm_disassemble(walk_state, display_op, ACPI_UINT32_MAX);
#endif

                if ((op->common.aml_opcode == AML_IF_OP) ||
                    (op->common.aml_opcode == AML_WHILE_OP)) {
                        if (walk_state->control_state->common.value) {
                                acpi_os_printf
                                    ("Predicate = [True], IF block was executed\n");
                        } else {
                                acpi_os_printf
                                    ("Predicate = [False], Skipping IF block\n");
                        }
                } else if (op->common.aml_opcode == AML_ELSE_OP) {
                        acpi_os_printf
                            ("Predicate = [False], ELSE block was executed\n");
                }

                /* Restore everything */

                op->common.next = next;
                acpi_os_printf("\n");
                if ((acpi_gbl_db_output_to_file) ||
                    (acpi_dbg_level & ACPI_LV_PARSE)) {
                        acpi_os_printf("\n");
                }
                acpi_dbg_level = original_debug_level;
        }

        /* If we are not single stepping, just continue executing the method */

        if (!acpi_gbl_cm_single_step) {
                return (AE_OK);
        }

        /*
         * If we are executing a step-to-call command,
         * Check if this is a method call.
         */
        if (acpi_gbl_step_to_next_call) {
                if (op->common.aml_opcode != AML_INT_METHODCALL_OP) {

                        /* Not a method call, just keep executing */

                        return (AE_OK);
                }

                /* Found a method call, stop executing */

                acpi_gbl_step_to_next_call = FALSE;
        }

        /*
         * If the next opcode is a method call, we will "step over" it
         * by default.
         */
        if (op->common.aml_opcode == AML_INT_METHODCALL_OP) {

                /* Force no more single stepping while executing called method */

                acpi_gbl_cm_single_step = FALSE;

                /*
                 * Set the breakpoint on/before the call, it will stop execution
                 * as soon as we return
                 */
                walk_state->method_breakpoint = 1;      /* Must be non-zero! */
        }

        status = acpi_db_start_command(walk_state, op);

        /* User commands complete, continue execution of the interrupted method */

        return (status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_initialize_debugger
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Init and start debugger
 *
 ******************************************************************************/

acpi_status acpi_initialize_debugger(void)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(acpi_initialize_debugger);

        /* Init globals */

        acpi_gbl_db_buffer = NULL;
        acpi_gbl_db_filename = NULL;
        acpi_gbl_db_output_to_file = FALSE;

        acpi_gbl_db_debug_level = ACPI_LV_VERBOSITY2;
        acpi_gbl_db_console_debug_level = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES;
        acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;

        acpi_gbl_db_opt_no_ini_methods = FALSE;

        acpi_gbl_db_buffer = acpi_os_allocate(ACPI_DEBUG_BUFFER_SIZE);
        if (!acpi_gbl_db_buffer) {
                return_ACPI_STATUS(AE_NO_MEMORY);
        }
        memset(acpi_gbl_db_buffer, 0, ACPI_DEBUG_BUFFER_SIZE);

        /* Initial scope is the root */

        acpi_gbl_db_scope_buf[0] = AML_ROOT_PREFIX;
        acpi_gbl_db_scope_buf[1] = 0;
        acpi_gbl_db_scope_node = acpi_gbl_root_node;

        /* Initialize user commands loop */

        acpi_gbl_db_terminate_loop = FALSE;

        /*
         * If configured for multi-thread support, the debug executor runs in
         * a separate thread so that the front end can be in another address
         * space, environment, or even another machine.
         */
        if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {

                /* These were created with one unit, grab it */

                status = acpi_os_acquire_mutex(acpi_gbl_db_command_complete,
                                               ACPI_WAIT_FOREVER);
                if (ACPI_FAILURE(status)) {
                        acpi_os_printf("Could not get debugger mutex\n");
                        return_ACPI_STATUS(status);
                }

                status = acpi_os_acquire_mutex(acpi_gbl_db_command_ready,
                                               ACPI_WAIT_FOREVER);
                if (ACPI_FAILURE(status)) {
                        acpi_os_printf("Could not get debugger mutex\n");
                        return_ACPI_STATUS(status);
                }

                /* Create the debug execution thread to execute commands */

                acpi_gbl_db_threads_terminated = FALSE;
                status = acpi_os_execute(OSL_DEBUGGER_MAIN_THREAD,
                                         acpi_db_execute_thread, NULL);
                if (ACPI_FAILURE(status)) {
                        ACPI_EXCEPTION((AE_INFO, status,
                                        "Could not start debugger thread"));
                        acpi_gbl_db_threads_terminated = TRUE;
                        return_ACPI_STATUS(status);
                }
        } else {
                acpi_gbl_db_thread_id = acpi_os_get_thread_id();
        }

        return_ACPI_STATUS(AE_OK);
}

ACPI_EXPORT_SYMBOL(acpi_initialize_debugger)

/*******************************************************************************
 *
 * FUNCTION:    acpi_terminate_debugger
 *
 * PARAMETERS:  None
 *
 * RETURN:      None
 *
 * DESCRIPTION: Stop debugger
 *
 ******************************************************************************/
void acpi_terminate_debugger(void)
{

        /* Terminate the AML Debugger */

        acpi_gbl_db_terminate_loop = TRUE;

        if (acpi_gbl_debugger_configuration & DEBUGGER_MULTI_THREADED) {
                acpi_os_release_mutex(acpi_gbl_db_command_ready);

                /* Wait the AML Debugger threads */

                while (!acpi_gbl_db_threads_terminated) {
                        acpi_os_sleep(100);
                }
        }

        if (acpi_gbl_db_buffer) {
                acpi_os_free(acpi_gbl_db_buffer);
                acpi_gbl_db_buffer = NULL;
        }

        /* Ensure that debug output is now disabled */

        acpi_gbl_db_output_flags = ACPI_DB_DISABLE_OUTPUT;
}

ACPI_EXPORT_SYMBOL(acpi_terminate_debugger)

/*******************************************************************************
 *
 * FUNCTION:    acpi_set_debugger_thread_id
 *
 * PARAMETERS:  thread_id       - Debugger thread ID
 *
 * RETURN:      None
 *
 * DESCRIPTION: Set debugger thread ID
 *
 ******************************************************************************/
void acpi_set_debugger_thread_id(acpi_thread_id thread_id)
{
        acpi_gbl_db_thread_id = thread_id;
}

ACPI_EXPORT_SYMBOL(acpi_set_debugger_thread_id)