?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
s390/ptrace: get rid of long longs in psw_bits
[linux/fpc-iii.git] / drivers / acpi / acpica / dswload.c
blob097188a6b1c1bb23d5ede8f940254cc93309d443
1 /******************************************************************************
2 *
3 * Module Name: dswload - Dispatcher first pass namespace load callbacks
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2015, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acparser.h"
47 #include "amlcode.h"
48 #include "acdispat.h"
49 #include "acinterp.h"
50 #include "acnamesp.h"
51
52 #ifdef ACPI_ASL_COMPILER
53 #include "acdisasm.h"
54 #endif
55
56 #define _COMPONENT ACPI_DISPATCHER
57 ACPI_MODULE_NAME("dswload")
58
59 /*******************************************************************************
60 *
61 * FUNCTION: acpi_ds_init_callbacks
62 *
63 * PARAMETERS: walk_state - Current state of the parse tree walk
64 * pass_number - 1, 2, or 3
65 *
66 * RETURN: Status
67 *
68 * DESCRIPTION: Init walk state callbacks
69 *
70 ******************************************************************************/
71 acpi_status
72 acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
73 {
74
75 switch (pass_number) {
76 case 0:
77
78 /* Parse only - caller will setup callbacks */
79
80 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
81 ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE;
82 walk_state->descending_callback = NULL;
83 walk_state->ascending_callback = NULL;
84 break;
85
86 case 1:
87
88 /* Load pass 1 */
89
90 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
91 ACPI_PARSE_DELETE_TREE;
92 walk_state->descending_callback = acpi_ds_load1_begin_op;
93 walk_state->ascending_callback = acpi_ds_load1_end_op;
94 break;
95
96 case 2:
97
98 /* Load pass 2 */
99
100 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
101 ACPI_PARSE_DELETE_TREE;
102 walk_state->descending_callback = acpi_ds_load2_begin_op;
103 walk_state->ascending_callback = acpi_ds_load2_end_op;
104 break;
105
106 case 3:
107
108 /* Execution pass */
109
110 #ifndef ACPI_NO_METHOD_EXECUTION
111 walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
112 ACPI_PARSE_DELETE_TREE;
113 walk_state->descending_callback = acpi_ds_exec_begin_op;
114 walk_state->ascending_callback = acpi_ds_exec_end_op;
115 #endif
116 break;
117
118 default:
119
120 return (AE_BAD_PARAMETER);
121 }
122
123 return (AE_OK);
124 }
125
126 /*******************************************************************************
127 *
128 * FUNCTION: acpi_ds_load1_begin_op
129 *
130 * PARAMETERS: walk_state - Current state of the parse tree walk
131 * out_op - Where to return op if a new one is created
132 *
133 * RETURN: Status
134 *
135 * DESCRIPTION: Descending callback used during the loading of ACPI tables.
136 *
137 ******************************************************************************/
138
139 acpi_status
140 acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
141 union acpi_parse_object ** out_op)
142 {
143 union acpi_parse_object *op;
144 struct acpi_namespace_node *node;
145 acpi_status status;
146 acpi_object_type object_type;
147 char *path;
148 u32 flags;
149
150 ACPI_FUNCTION_TRACE(ds_load1_begin_op);
151
152 op = walk_state->op;
153 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
154 walk_state));
155
156 /* We are only interested in opcodes that have an associated name */
157
158 if (op) {
159 if (!(walk_state->op_info->flags & AML_NAMED)) {
160 *out_op = op;
161 return_ACPI_STATUS(AE_OK);
162 }
163
164 /* Check if this object has already been installed in the namespace */
165
166 if (op->common.node) {
167 *out_op = op;
168 return_ACPI_STATUS(AE_OK);
169 }
170 }
171
172 path = acpi_ps_get_next_namestring(&walk_state->parser_state);
173
174 /* Map the raw opcode into an internal object type */
175
176 object_type = walk_state->op_info->object_type;
177
178 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
179 "State=%p Op=%p [%s]\n", walk_state, op,
180 acpi_ut_get_type_name(object_type)));
181
182 switch (walk_state->opcode) {
183 case AML_SCOPE_OP:
184 /*
185 * The target name of the Scope() operator must exist at this point so
186 * that we can actually open the scope to enter new names underneath it.
187 * Allow search-to-root for single namesegs.
188 */
189 status =
190 acpi_ns_lookup(walk_state->scope_info, path, object_type,
191 ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
192 walk_state, &(node));
193 #ifdef ACPI_ASL_COMPILER
194 if (status == AE_NOT_FOUND) {
195 /*
196 * Table disassembly:
197 * Target of Scope() not found. Generate an External for it, and
198 * insert the name into the namespace.
199 */
200 acpi_dm_add_op_to_external_list(op, path,
201 ACPI_TYPE_DEVICE, 0, 0);
202 status =
203 acpi_ns_lookup(walk_state->scope_info, path,
204 object_type, ACPI_IMODE_LOAD_PASS1,
205 ACPI_NS_SEARCH_PARENT, walk_state,
206 &node);
207 }
208 #endif
209 if (ACPI_FAILURE(status)) {
210 ACPI_ERROR_NAMESPACE(path, status);
211 return_ACPI_STATUS(status);
212 }
213
214 /*
215 * Check to make sure that the target is
216 * one of the opcodes that actually opens a scope
217 */
218 switch (node->type) {
219 case ACPI_TYPE_ANY:
220 case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
221 case ACPI_TYPE_DEVICE:
222 case ACPI_TYPE_POWER:
223 case ACPI_TYPE_PROCESSOR:
224 case ACPI_TYPE_THERMAL:
225
226 /* These are acceptable types */
227 break;
228
229 case ACPI_TYPE_INTEGER:
230 case ACPI_TYPE_STRING:
231 case ACPI_TYPE_BUFFER:
232 /*
233 * These types we will allow, but we will change the type.
234 * This enables some existing code of the form:
235 *
236 * Name (DEB, 0)
237 * Scope (DEB) { ... }
238 *
239 * Note: silently change the type here. On the second pass,
240 * we will report a warning
241 */
242 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
243 "Type override - [%4.4s] had invalid type (%s) "
244 "for Scope operator, changed to type ANY\n",
245 acpi_ut_get_node_name(node),
246 acpi_ut_get_type_name(node->type)));
247
248 node->type = ACPI_TYPE_ANY;
249 walk_state->scope_info->common.value = ACPI_TYPE_ANY;
250 break;
251
252 case ACPI_TYPE_METHOD:
253 /*
254 * Allow scope change to root during execution of module-level
255 * code. Root is typed METHOD during this time.
256 */
257 if ((node == acpi_gbl_root_node) &&
258 (walk_state->
259 parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
260 break;
261 }
262
263 /*lint -fallthrough */
264
265 default:
266
267 /* All other types are an error */
268
269 ACPI_ERROR((AE_INFO,
270 "Invalid type (%s) for target of "
271 "Scope operator [%4.4s] (Cannot override)",
272 acpi_ut_get_type_name(node->type),
273 acpi_ut_get_node_name(node)));
274
275 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
276 }
277 break;
278
279 default:
280 /*
281 * For all other named opcodes, we will enter the name into
282 * the namespace.
283 *
284 * Setup the search flags.
285 * Since we are entering a name into the namespace, we do not want to
286 * enable the search-to-root upsearch.
287 *
288 * There are only two conditions where it is acceptable that the name
289 * already exists:
290 * 1) the Scope() operator can reopen a scoping object that was
291 * previously defined (Scope, Method, Device, etc.)
292 * 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
293 * buffer_field, or Package), the name of the object is already
294 * in the namespace.
295 */
296 if (walk_state->deferred_node) {
297
298 /* This name is already in the namespace, get the node */
299
300 node = walk_state->deferred_node;
301 status = AE_OK;
302 break;
303 }
304
305 /*
306 * If we are executing a method, do not create any namespace objects
307 * during the load phase, only during execution.
308 */
309 if (walk_state->method_node) {
310 node = NULL;
311 status = AE_OK;
312 break;
313 }
314
315 flags = ACPI_NS_NO_UPSEARCH;
316 if ((walk_state->opcode != AML_SCOPE_OP) &&
317 (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
318 if (walk_state->namespace_override) {
319 flags |= ACPI_NS_OVERRIDE_IF_FOUND;
320 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
321 "[%s] Override allowed\n",
322 acpi_ut_get_type_name
323 (object_type)));
324 } else {
325 flags |= ACPI_NS_ERROR_IF_FOUND;
326 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
327 "[%s] Cannot already exist\n",
328 acpi_ut_get_type_name
329 (object_type)));
330 }
331 } else {
332 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
333 "[%s] Both Find or Create allowed\n",
334 acpi_ut_get_type_name(object_type)));
335 }
336
337 /*
338 * Enter the named type into the internal namespace. We enter the name
339 * as we go downward in the parse tree. Any necessary subobjects that
340 * involve arguments to the opcode must be created as we go back up the
341 * parse tree later.
342 */
343 status =
344 acpi_ns_lookup(walk_state->scope_info, path, object_type,
345 ACPI_IMODE_LOAD_PASS1, flags, walk_state,
346 &node);
347 if (ACPI_FAILURE(status)) {
348 if (status == AE_ALREADY_EXISTS) {
349
350 /* The name already exists in this scope */
351
352 if (node->flags & ANOBJ_IS_EXTERNAL) {
353 /*
354 * Allow one create on an object or segment that was
355 * previously declared External
356 */
357 node->flags &= ~ANOBJ_IS_EXTERNAL;
358 node->type = (u8) object_type;
359
360 /* Just retyped a node, probably will need to open a scope */
361
362 if (acpi_ns_opens_scope(object_type)) {
363 status =
364 acpi_ds_scope_stack_push
365 (node, object_type,
366 walk_state);
367 if (ACPI_FAILURE(status)) {
368 return_ACPI_STATUS
369 (status);
370 }
371 }
372
373 status = AE_OK;
374 }
375 }
376
377 if (ACPI_FAILURE(status)) {
378 ACPI_ERROR_NAMESPACE(path, status);
379 return_ACPI_STATUS(status);
380 }
381 }
382 break;
383 }
384
385 /* Common exit */
386
387 if (!op) {
388
389 /* Create a new op */
390
391 op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
392 if (!op) {
393 return_ACPI_STATUS(AE_NO_MEMORY);
394 }
395 }
396
397 /* Initialize the op */
398
399 #if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
400 op->named.path = ACPI_CAST_PTR(u8, path);
401 #endif
402
403 if (node) {
404 /*
405 * Put the Node in the "op" object that the parser uses, so we
406 * can get it again quickly when this scope is closed
407 */
408 op->common.node = node;
409 op->named.name = node->name.integer;
410 }
411
412 acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
413 op);
414 *out_op = op;
415 return_ACPI_STATUS(status);
416 }
417
418 /*******************************************************************************
419 *
420 * FUNCTION: acpi_ds_load1_end_op
421 *
422 * PARAMETERS: walk_state - Current state of the parse tree walk
423 *
424 * RETURN: Status
425 *
426 * DESCRIPTION: Ascending callback used during the loading of the namespace,
427 * both control methods and everything else.
428 *
429 ******************************************************************************/
430
431 acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
432 {
433 union acpi_parse_object *op;
434 acpi_object_type object_type;
435 acpi_status status = AE_OK;
436
437 ACPI_FUNCTION_TRACE(ds_load1_end_op);
438
439 op = walk_state->op;
440 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
441 walk_state));
442
443 /* We are only interested in opcodes that have an associated name */
444
445 if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
446 return_ACPI_STATUS(AE_OK);
447 }
448
449 /* Get the object type to determine if we should pop the scope */
450
451 object_type = walk_state->op_info->object_type;
452
453 #ifndef ACPI_NO_METHOD_EXECUTION
454 if (walk_state->op_info->flags & AML_FIELD) {
455 /*
456 * If we are executing a method, do not create any namespace objects
457 * during the load phase, only during execution.
458 */
459 if (!walk_state->method_node) {
460 if (walk_state->opcode == AML_FIELD_OP ||
461 walk_state->opcode == AML_BANK_FIELD_OP ||
462 walk_state->opcode == AML_INDEX_FIELD_OP) {
463 status =
464 acpi_ds_init_field_objects(op, walk_state);
465 }
466 }
467 return_ACPI_STATUS(status);
468 }
469
470 /*
471 * If we are executing a method, do not create any namespace objects
472 * during the load phase, only during execution.
473 */
474 if (!walk_state->method_node) {
475 if (op->common.aml_opcode == AML_REGION_OP) {
476 status =
477 acpi_ex_create_region(op->named.data,
478 op->named.length,
479 (acpi_adr_space_type) ((op->
480 common.
481 value.
482 arg)->
483 common.
484 value.
485 integer),
486 walk_state);
487 if (ACPI_FAILURE(status)) {
488 return_ACPI_STATUS(status);
489 }
490 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
491 status =
492 acpi_ex_create_region(op->named.data,
493 op->named.length,
494 ACPI_ADR_SPACE_DATA_TABLE,
495 walk_state);
496 if (ACPI_FAILURE(status)) {
497 return_ACPI_STATUS(status);
498 }
499 }
500 }
501 #endif
502
503 if (op->common.aml_opcode == AML_NAME_OP) {
504
505 /* For Name opcode, get the object type from the argument */
506
507 if (op->common.value.arg) {
508 object_type = (acpi_ps_get_opcode_info((op->common.
509 value.arg)->
510 common.
511 aml_opcode))->
512 object_type;
513
514 /* Set node type if we have a namespace node */
515
516 if (op->common.node) {
517 op->common.node->type = (u8) object_type;
518 }
519 }
520 }
521
522 /*
523 * If we are executing a method, do not create any namespace objects
524 * during the load phase, only during execution.
525 */
526 if (!walk_state->method_node) {
527 if (op->common.aml_opcode == AML_METHOD_OP) {
528 /*
529 * method_op pkg_length name_string method_flags term_list
530 *
531 * Note: We must create the method node/object pair as soon as we
532 * see the method declaration. This allows later pass1 parsing
533 * of invocations of the method (need to know the number of
534 * arguments.)
535 */
536 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
537 "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
538 walk_state, op, op->named.node));
539
540 if (!acpi_ns_get_attached_object(op->named.node)) {
541 walk_state->operands[0] =
542 ACPI_CAST_PTR(void, op->named.node);
543 walk_state->num_operands = 1;
544
545 status =
546 acpi_ds_create_operands(walk_state,
547 op->common.value.
548 arg);
549 if (ACPI_SUCCESS(status)) {
550 status =
551 acpi_ex_create_method(op->named.
552 data,
553 op->named.
554 length,
555 walk_state);
556 }
557
558 walk_state->operands[0] = NULL;
559 walk_state->num_operands = 0;
560
561 if (ACPI_FAILURE(status)) {
562 return_ACPI_STATUS(status);
563 }
564 }
565 }
566 }
567
568 /* Pop the scope stack (only if loading a table) */
569
570 if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
571 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
572 "(%s): Popping scope for Op %p\n",
573 acpi_ut_get_type_name(object_type), op));
574
575 status = acpi_ds_scope_stack_pop(walk_state);
576 }
577
578 return_ACPI_STATUS(status);
579 }
Linux with added FPC-III support