s390/ptrace: get rid of long longs in psw_bits

[linux/fpc-iii.git] / drivers / acpi / acpica / evxfgpe.c

/******************************************************************************
 *
 * Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs)
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2015, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#define EXPORT_ACPI_INTERFACES

#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"

#define _COMPONENT          ACPI_EVENTS
ACPI_MODULE_NAME("evxfgpe")

#if (!ACPI_REDUCED_HARDWARE)    /* Entire module */
/*******************************************************************************
 *
 * FUNCTION:    acpi_update_all_gpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Complete GPE initialization and enable all GPEs that have
 *              associated _Lxx or _Exx methods and are not pointed to by any
 *              device _PRW methods (this indicates that these GPEs are
 *              generally intended for system or device wakeup. Such GPEs
 *              have to be enabled directly when the devices whose _PRW
 *              methods point to them are set up for wakeup signaling.)
 *
 * NOTE: Should be called after any GPEs are added to the system. Primarily,
 * after the system _PRW methods have been run, but also after a GPE Block
 * Device has been added or if any new GPE methods have been added via a
 * dynamic table load.
 *
 ******************************************************************************/

acpi_status acpi_update_all_gpes(void)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(acpi_update_all_gpes);

        status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        if (acpi_gbl_all_gpes_initialized) {
                goto unlock_and_exit;
        }

        status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL);
        if (ACPI_SUCCESS(status)) {
                acpi_gbl_all_gpes_initialized = TRUE;
        }

unlock_and_exit:
        (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);

        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_update_all_gpes)

/*******************************************************************************
 *
 * FUNCTION:    acpi_enable_gpe
 *
 * PARAMETERS:  gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number          - GPE level within the GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
 *              hardware-enabled.
 *
 ******************************************************************************/
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
        acpi_status status = AE_BAD_PARAMETER;
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_enable_gpe);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /*
         * Ensure that we have a valid GPE number and that there is some way
         * of handling the GPE (handler or a GPE method). In other words, we
         * won't allow a valid GPE to be enabled if there is no way to handle it.
         */
        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (gpe_event_info) {
                if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) !=
                    ACPI_GPE_DISPATCH_NONE) {
                        status = acpi_ev_add_gpe_reference(gpe_event_info);
                } else {
                        status = AE_NO_HANDLER;
                }
        }

        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_gpe)

/*******************************************************************************
 *
 * FUNCTION:    acpi_disable_gpe
 *
 * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number      - GPE level within the GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Remove a reference to a GPE. When the last reference is
 *              removed, only then is the GPE disabled (for runtime GPEs), or
 *              the GPE mask bit disabled (for wake GPEs)
 *
 ******************************************************************************/

acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
        acpi_status status = AE_BAD_PARAMETER;
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_disable_gpe);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (gpe_event_info) {
                status = acpi_ev_remove_gpe_reference(gpe_event_info) ;
        }

        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_disable_gpe)

/*******************************************************************************
 *
 * FUNCTION:    acpi_set_gpe
 *
 * PARAMETERS:  gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number          - GPE level within the GPE block
 *              action              - ACPI_GPE_ENABLE or ACPI_GPE_DISABLE
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable or disable an individual GPE. This function bypasses
 *              the reference count mechanism used in the acpi_enable_gpe(),
 *              acpi_disable_gpe() interfaces.
 *              This API is typically used by the GPE raw handler mode driver
 *              to switch between the polling mode and the interrupt mode after
 *              the driver has enabled the GPE.
 *              The APIs should be invoked in this order:
 *               acpi_enable_gpe()            <- Ensure the reference count > 0
 *               acpi_set_gpe(ACPI_GPE_DISABLE) <- Enter polling mode
 *               acpi_set_gpe(ACPI_GPE_ENABLE) <- Leave polling mode
 *               acpi_disable_gpe()           <- Decrease the reference count
 *
 * Note: If a GPE is shared by 2 silicon components, then both the drivers
 *       should support GPE polling mode or disabling the GPE for long period
 *       for one driver may break the other. So use it with care since all
 *       firmware _Lxx/_Exx handlers currently rely on the GPE interrupt mode.
 *
 ******************************************************************************/
acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_status status;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_set_gpe);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (!gpe_event_info) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        /* Perform the action */

        switch (action) {
        case ACPI_GPE_ENABLE:

                status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
                break;

        case ACPI_GPE_DISABLE:

                status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
                break;

        default:

                status = AE_BAD_PARAMETER;
                break;
        }

unlock_and_exit:
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_set_gpe)

/*******************************************************************************
 *
 * FUNCTION:    acpi_mark_gpe_for_wake
 *
 * PARAMETERS:  gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number          - GPE level within the GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Mark a GPE as having the ability to wake the system. Simply
 *              sets the ACPI_GPE_CAN_WAKE flag.
 *
 * Some potential callers of acpi_setup_gpe_for_wake may know in advance that
 * there won't be any notify handlers installed for device wake notifications
 * from the given GPE (one example is a button GPE in Linux). For these cases,
 * acpi_mark_gpe_for_wake should be used instead of acpi_setup_gpe_for_wake.
 * This will set the ACPI_GPE_CAN_WAKE flag for the GPE without trying to
 * setup implicit wake notification for it (since there's no handler method).
 *
 ******************************************************************************/
acpi_status acpi_mark_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number)
{
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_status status = AE_BAD_PARAMETER;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_mark_gpe_for_wake);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (gpe_event_info) {

                /* Mark the GPE as a possible wake event */

                gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
                status = AE_OK;
        }

        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_mark_gpe_for_wake)

/*******************************************************************************
 *
 * FUNCTION:    acpi_setup_gpe_for_wake
 *
 * PARAMETERS:  wake_device         - Device associated with the GPE (via _PRW)
 *              gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number          - GPE level within the GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Mark a GPE as having the ability to wake the system. This
 *              interface is intended to be used as the host executes the
 *              _PRW methods (Power Resources for Wake) in the system tables.
 *              Each _PRW appears under a Device Object (The wake_device), and
 *              contains the info for the wake GPE associated with the
 *              wake_device.
 *
 ******************************************************************************/
acpi_status
acpi_setup_gpe_for_wake(acpi_handle wake_device,
                        acpi_handle gpe_device, u32 gpe_number)
{
        acpi_status status;
        struct acpi_gpe_event_info *gpe_event_info;
        struct acpi_namespace_node *device_node;
        struct acpi_gpe_notify_info *notify;
        struct acpi_gpe_notify_info *new_notify;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);

        /* Parameter Validation */

        if (!wake_device) {
                /*
                 * By forcing wake_device to be valid, we automatically enable the
                 * implicit notify feature on all hosts.
                 */
                return_ACPI_STATUS(AE_BAD_PARAMETER);
        }

        /* Handle root object case */

        if (wake_device == ACPI_ROOT_OBJECT) {
                device_node = acpi_gbl_root_node;
        } else {
                device_node =
                    ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
        }

        /* Validate wake_device is of type Device */

        if (device_node->type != ACPI_TYPE_DEVICE) {
                return_ACPI_STATUS (AE_BAD_PARAMETER);
        }

        /*
         * Allocate a new notify object up front, in case it is needed.
         * Memory allocation while holding a spinlock is a big no-no
         * on some hosts.
         */
        new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info));
        if (!new_notify) {
                return_ACPI_STATUS(AE_NO_MEMORY);
        }

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (!gpe_event_info) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        /*
         * If there is no method or handler for this GPE, then the
         * wake_device will be notified whenever this GPE fires. This is
         * known as an "implicit notify". Note: The GPE is assumed to be
         * level-triggered (for windows compatibility).
         */
        if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
            ACPI_GPE_DISPATCH_NONE) {
                /*
                 * This is the first device for implicit notify on this GPE.
                 * Just set the flags here, and enter the NOTIFY block below.
                 */
                gpe_event_info->flags =
                    (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
        }

        /*
         * If we already have an implicit notify on this GPE, add
         * this device to the notify list.
         */
        if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
            ACPI_GPE_DISPATCH_NOTIFY) {

                /* Ensure that the device is not already in the list */

                notify = gpe_event_info->dispatch.notify_list;
                while (notify) {
                        if (notify->device_node == device_node) {
                                status = AE_ALREADY_EXISTS;
                                goto unlock_and_exit;
                        }
                        notify = notify->next;
                }

                /* Add this device to the notify list for this GPE */

                new_notify->device_node = device_node;
                new_notify->next = gpe_event_info->dispatch.notify_list;
                gpe_event_info->dispatch.notify_list = new_notify;
                new_notify = NULL;
        }

        /* Mark the GPE as a possible wake event */

        gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
        status = AE_OK;

unlock_and_exit:
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);

        /* Delete the notify object if it was not used above */

        if (new_notify) {
                ACPI_FREE(new_notify);
        }
        return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)

/*******************************************************************************
 *
 * FUNCTION:    acpi_set_gpe_wake_mask
 *
 * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number      - GPE level within the GPE block
 *              action              - Enable or Disable
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
 *              already be marked as a WAKE GPE.
 *
 ******************************************************************************/

acpi_status
acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
        acpi_status status = AE_OK;
        struct acpi_gpe_event_info *gpe_event_info;
        struct acpi_gpe_register_info *gpe_register_info;
        acpi_cpu_flags flags;
        u32 register_bit;

        ACPI_FUNCTION_TRACE(acpi_set_gpe_wake_mask);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /*
         * Ensure that we have a valid GPE number and that this GPE is in
         * fact a wake GPE
         */
        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (!gpe_event_info) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
                status = AE_TYPE;
                goto unlock_and_exit;
        }

        gpe_register_info = gpe_event_info->register_info;
        if (!gpe_register_info) {
                status = AE_NOT_EXIST;
                goto unlock_and_exit;
        }

        register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);

        /* Perform the action */

        switch (action) {
        case ACPI_GPE_ENABLE:

                ACPI_SET_BIT(gpe_register_info->enable_for_wake,
                             (u8)register_bit);
                break;

        case ACPI_GPE_DISABLE:

                ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
                               (u8)register_bit);
                break;

        default:

                ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
                status = AE_BAD_PARAMETER;
                break;
        }

unlock_and_exit:
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_set_gpe_wake_mask)

/*******************************************************************************
 *
 * FUNCTION:    acpi_clear_gpe
 *
 * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number      - GPE level within the GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Clear an ACPI event (general purpose)
 *
 ******************************************************************************/
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number)
{
        acpi_status status = AE_OK;
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_clear_gpe);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (!gpe_event_info) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        status = acpi_hw_clear_gpe(gpe_event_info);

      unlock_and_exit:
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_clear_gpe)

/*******************************************************************************
 *
 * FUNCTION:    acpi_get_gpe_status
 *
 * PARAMETERS:  gpe_device          - Parent GPE Device. NULL for GPE0/GPE1
 *              gpe_number          - GPE level within the GPE block
 *              event_status        - Where the current status of the event
 *                                    will be returned
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Get the current status of a GPE (signalled/not_signalled)
 *
 ******************************************************************************/
acpi_status
acpi_get_gpe_status(acpi_handle gpe_device,
                    u32 gpe_number, acpi_event_status *event_status)
{
        acpi_status status = AE_OK;
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_get_gpe_status);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (!gpe_event_info) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        /* Obtain status on the requested GPE number */

        status = acpi_hw_get_gpe_status(gpe_event_info, event_status);

unlock_and_exit:
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)

/*******************************************************************************
 *
 * FUNCTION:    acpi_finish_gpe
 *
 * PARAMETERS:  gpe_device          - Namespace node for the GPE Block
 *                                    (NULL for FADT defined GPEs)
 *              gpe_number          - GPE level within the GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Clear and conditionally reenable a GPE. This completes the GPE
 *              processing. Intended for use by asynchronous host-installed
 *              GPE handlers. The GPE is only reenabled if the enable_for_run bit
 *              is set in the GPE info.
 *
 ******************************************************************************/
acpi_status acpi_finish_gpe(acpi_handle gpe_device, u32 gpe_number)
{
        struct acpi_gpe_event_info *gpe_event_info;
        acpi_status status;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(acpi_finish_gpe);

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);

        /* Ensure that we have a valid GPE number */

        gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
        if (!gpe_event_info) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        status = acpi_ev_finish_gpe(gpe_event_info);

unlock_and_exit:
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_finish_gpe)

/******************************************************************************
 *
 * FUNCTION:    acpi_disable_all_gpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
 *
 ******************************************************************************/

acpi_status acpi_disable_all_gpes(void)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(acpi_disable_all_gpes);

        status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        status = acpi_hw_disable_all_gpes();
        (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);

        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes)

/******************************************************************************
 *
 * FUNCTION:    acpi_enable_all_runtime_gpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
 *
 ******************************************************************************/

acpi_status acpi_enable_all_runtime_gpes(void)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes);

        status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        status = acpi_hw_enable_all_runtime_gpes();
        (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);

        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes)

/******************************************************************************
 *
 * FUNCTION:    acpi_enable_all_wakeup_gpes
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enable all "wakeup" GPEs and disable all of the other GPEs, in
 *              all GPE blocks.
 *
 ******************************************************************************/
acpi_status acpi_enable_all_wakeup_gpes(void)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(acpi_enable_all_wakeup_gpes);

        status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        status = acpi_hw_enable_all_wakeup_gpes();
        (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);

        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_enable_all_wakeup_gpes)

/*******************************************************************************
 *
 * FUNCTION:    acpi_install_gpe_block
 *
 * PARAMETERS:  gpe_device          - Handle to the parent GPE Block Device
 *              gpe_block_address   - Address and space_ID
 *              register_count      - Number of GPE register pairs in the block
 *              interrupt_number    - H/W interrupt for the block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not
 *              enabled here.
 *
 ******************************************************************************/
acpi_status
acpi_install_gpe_block(acpi_handle gpe_device,
                       struct acpi_generic_address *gpe_block_address,
                       u32 register_count, u32 interrupt_number)
{
        acpi_status status;
        union acpi_operand_object *obj_desc;
        struct acpi_namespace_node *node;
        struct acpi_gpe_block_info *gpe_block;

        ACPI_FUNCTION_TRACE(acpi_install_gpe_block);

        if ((!gpe_device) || (!gpe_block_address) || (!register_count)) {
                return_ACPI_STATUS(AE_BAD_PARAMETER);
        }

        status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        node = acpi_ns_validate_handle(gpe_device);
        if (!node) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        /* Validate the parent device */

        if (node->type != ACPI_TYPE_DEVICE) {
                status = AE_TYPE;
                goto unlock_and_exit;
        }

        if (node->object) {
                status = AE_ALREADY_EXISTS;
                goto unlock_and_exit;
        }

        /*
         * For user-installed GPE Block Devices, the gpe_block_base_number
         * is always zero
         */
        status = acpi_ev_create_gpe_block(node, gpe_block_address->address,
                                          gpe_block_address->space_id,
                                          register_count, 0, interrupt_number,
                                          &gpe_block);
        if (ACPI_FAILURE(status)) {
                goto unlock_and_exit;
        }

        /* Install block in the device_object attached to the node */

        obj_desc = acpi_ns_get_attached_object(node);
        if (!obj_desc) {

                /*
                 * No object, create a new one (Device nodes do not always have
                 * an attached object)
                 */
                obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE);
                if (!obj_desc) {
                        status = AE_NO_MEMORY;
                        goto unlock_and_exit;
                }

                status =
                    acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE);

                /* Remove local reference to the object */

                acpi_ut_remove_reference(obj_desc);

                if (ACPI_FAILURE(status)) {
                        goto unlock_and_exit;
                }
        }

        /* Now install the GPE block in the device_object */

        obj_desc->device.gpe_block = gpe_block;

unlock_and_exit:
        (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_install_gpe_block)

/*******************************************************************************
 *
 * FUNCTION:    acpi_remove_gpe_block
 *
 * PARAMETERS:  gpe_device          - Handle to the parent GPE Block Device
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Remove a previously installed block of GPE registers
 *
 ******************************************************************************/
acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
{
        union acpi_operand_object *obj_desc;
        acpi_status status;
        struct acpi_namespace_node *node;

        ACPI_FUNCTION_TRACE(acpi_remove_gpe_block);

        if (!gpe_device) {
                return_ACPI_STATUS(AE_BAD_PARAMETER);
        }

        status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        node = acpi_ns_validate_handle(gpe_device);
        if (!node) {
                status = AE_BAD_PARAMETER;
                goto unlock_and_exit;
        }

        /* Validate the parent device */

        if (node->type != ACPI_TYPE_DEVICE) {
                status = AE_TYPE;
                goto unlock_and_exit;
        }

        /* Get the device_object attached to the node */

        obj_desc = acpi_ns_get_attached_object(node);
        if (!obj_desc || !obj_desc->device.gpe_block) {
                return_ACPI_STATUS(AE_NULL_OBJECT);
        }

        /* Delete the GPE block (but not the device_object) */

        status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block);
        if (ACPI_SUCCESS(status)) {
                obj_desc->device.gpe_block = NULL;
        }

unlock_and_exit:
        (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
        return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)

/*******************************************************************************
 *
 * FUNCTION:    acpi_get_gpe_device
 *
 * PARAMETERS:  index               - System GPE index (0-current_gpe_count)
 *              gpe_device          - Where the parent GPE Device is returned
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Obtain the GPE device associated with the input index. A NULL
 *              gpe device indicates that the gpe number is contained in one of
 *              the FADT-defined gpe blocks. Otherwise, the GPE block device.
 *
 ******************************************************************************/
acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
{
        struct acpi_gpe_device_info info;
        acpi_status status;

        ACPI_FUNCTION_TRACE(acpi_get_gpe_device);

        if (!gpe_device) {
                return_ACPI_STATUS(AE_BAD_PARAMETER);
        }

        if (index >= acpi_current_gpe_count) {
                return_ACPI_STATUS(AE_NOT_EXIST);
        }

        /* Setup and walk the GPE list */

        info.index = index;
        info.status = AE_NOT_EXIST;
        info.gpe_device = NULL;
        info.next_block_base_index = 0;

        status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        *gpe_device = ACPI_CAST_PTR(acpi_handle, info.gpe_device);
        return_ACPI_STATUS(info.status);
}

ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
#endif                          /* !ACPI_REDUCED_HARDWARE */