drivers/acpi/acpica/exutils.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exutils - interpreter/scanner utilities
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2015, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 /*
  45  * DEFINE_AML_GLOBALS is tested in amlcode.h
  46  * to determine whether certain global names should be "defined" or only
  47  * "declared" in the current compilation. This enhances maintainability
  48  * by enabling a single header file to embody all knowledge of the names
  49  * in question.
  50  *
  51  * Exactly one module of any executable should #define DEFINE_GLOBALS
  52  * before #including the header files which use this convention. The
  53  * names in question will be defined and initialized in that module,
  54  * and declared as extern in all other modules which #include those
  55  * header files.
  56  */
  57
  58 #define DEFINE_AML_GLOBALS
  59
  60 #include <acpi/acpi.h>
  61 #include "accommon.h"
  62 #include "acinterp.h"
  63 #include "amlcode.h"
  64
  65 #define _COMPONENT          ACPI_EXECUTER
  66 ACPI_MODULE_NAME("exutils")
  67
  68 /* Local prototypes */
  69 static u32 acpi_ex_digits_needed(u64 value, u32 base);
  70
  71 #ifndef ACPI_NO_METHOD_EXECUTION
  72 /*******************************************************************************
  73  *
  74  * FUNCTION:    acpi_ex_enter_interpreter
  75  *
  76  * PARAMETERS:  None
  77  *
  78  * RETURN:      None
  79  *
  80  * DESCRIPTION: Enter the interpreter execution region. Failure to enter
  81  *              the interpreter region is a fatal system error. Used in
  82  *              conjunction with exit_interpreter.
  83  *
  84  ******************************************************************************/
  85
  86 void acpi_ex_enter_interpreter(void)
  87 {
  88         acpi_status status;
  89
  90         ACPI_FUNCTION_TRACE(ex_enter_interpreter);
  91
  92         status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
  93         if (ACPI_FAILURE(status)) {
  94                 ACPI_ERROR((AE_INFO,
  95                             "Could not acquire AML Interpreter mutex"));
  96         }
  97
  98         return_VOID;
  99 }
 100
 101 /*******************************************************************************
 102  *
 103  * FUNCTION:    acpi_ex_exit_interpreter
 104  *
 105  * PARAMETERS:  None
 106  *
 107  * RETURN:      None
 108  *
 109  * DESCRIPTION: Exit the interpreter execution region. This is the top level
 110  *              routine used to exit the interpreter when all processing has
 111  *              been completed, or when the method blocks.
 112  *
 113  * Cases where the interpreter is unlocked internally:
 114  *      1) Method will be blocked on a Sleep() AML opcode
 115  *      2) Method will be blocked on an Acquire() AML opcode
 116  *      3) Method will be blocked on a Wait() AML opcode
 117  *      4) Method will be blocked to acquire the global lock
 118  *      5) Method will be blocked waiting to execute a serialized control
 119  *          method that is currently executing
 120  *      6) About to invoke a user-installed opregion handler
 121  *
 122  ******************************************************************************/
 123
 124 void acpi_ex_exit_interpreter(void)
 125 {
 126         acpi_status status;
 127
 128         ACPI_FUNCTION_TRACE(ex_exit_interpreter);
 129
 130         status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
 131         if (ACPI_FAILURE(status)) {
 132                 ACPI_ERROR((AE_INFO,
 133                             "Could not release AML Interpreter mutex"));
 134         }
 135
 136         return_VOID;
 137 }
 138
 139 /*******************************************************************************
 140  *
 141  * FUNCTION:    acpi_ex_truncate_for32bit_table
 142  *
 143  * PARAMETERS:  obj_desc        - Object to be truncated
 144  *
 145  * RETURN:      TRUE if a truncation was performed, FALSE otherwise.
 146  *
 147  * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
 148  *              32-bit, as determined by the revision of the DSDT.
 149  *
 150  ******************************************************************************/
 151
 152 u8 acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc)
 153 {
 154
 155         ACPI_FUNCTION_ENTRY();
 156
 157         /*
 158          * Object must be a valid number and we must be executing
 159          * a control method. Object could be NS node for AML_INT_NAMEPATH_OP.
 160          */
 161         if ((!obj_desc) ||
 162             (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) ||
 163             (obj_desc->common.type != ACPI_TYPE_INTEGER)) {
 164                 return (FALSE);
 165         }
 166
 167         if ((acpi_gbl_integer_byte_width == 4) &&
 168             (obj_desc->integer.value > (u64)ACPI_UINT32_MAX)) {
 169                 /*
 170                  * We are executing in a 32-bit ACPI table.
 171                  * Truncate the value to 32 bits by zeroing out the upper 32-bit field
 172                  */
 173                 obj_desc->integer.value &= (u64)ACPI_UINT32_MAX;
 174                 return (TRUE);
 175         }
 176
 177         return (FALSE);
 178 }
 179
 180 /*******************************************************************************
 181  *
 182  * FUNCTION:    acpi_ex_acquire_global_lock
 183  *
 184  * PARAMETERS:  field_flags           - Flags with Lock rule:
 185  *                                      always_lock or never_lock
 186  *
 187  * RETURN:      None
 188  *
 189  * DESCRIPTION: Obtain the ACPI hardware Global Lock, only if the field
 190  *              flags specifiy that it is to be obtained before field access.
 191  *
 192  ******************************************************************************/
 193
 194 void acpi_ex_acquire_global_lock(u32 field_flags)
 195 {
 196         acpi_status status;
 197
 198         ACPI_FUNCTION_TRACE(ex_acquire_global_lock);
 199
 200         /* Only use the lock if the always_lock bit is set */
 201
 202         if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) {
 203                 return_VOID;
 204         }
 205
 206         /* Attempt to get the global lock, wait forever */
 207
 208         status = acpi_ex_acquire_mutex_object(ACPI_WAIT_FOREVER,
 209                                               acpi_gbl_global_lock_mutex,
 210                                               acpi_os_get_thread_id());
 211
 212         if (ACPI_FAILURE(status)) {
 213                 ACPI_EXCEPTION((AE_INFO, status,
 214                                 "Could not acquire Global Lock"));
 215         }
 216
 217         return_VOID;
 218 }
 219
 220 /*******************************************************************************
 221  *
 222  * FUNCTION:    acpi_ex_release_global_lock
 223  *
 224  * PARAMETERS:  field_flags           - Flags with Lock rule:
 225  *                                      always_lock or never_lock
 226  *
 227  * RETURN:      None
 228  *
 229  * DESCRIPTION: Release the ACPI hardware Global Lock
 230  *
 231  ******************************************************************************/
 232
 233 void acpi_ex_release_global_lock(u32 field_flags)
 234 {
 235         acpi_status status;
 236
 237         ACPI_FUNCTION_TRACE(ex_release_global_lock);
 238
 239         /* Only use the lock if the always_lock bit is set */
 240
 241         if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) {
 242                 return_VOID;
 243         }
 244
 245         /* Release the global lock */
 246
 247         status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex);
 248         if (ACPI_FAILURE(status)) {
 249
 250                 /* Report the error, but there isn't much else we can do */
 251
 252                 ACPI_EXCEPTION((AE_INFO, status,
 253                                 "Could not release Global Lock"));
 254         }
 255
 256         return_VOID;
 257 }
 258
 259 /*******************************************************************************
 260  *
 261  * FUNCTION:    acpi_ex_digits_needed
 262  *
 263  * PARAMETERS:  value           - Value to be represented
 264  *              base            - Base of representation
 265  *
 266  * RETURN:      The number of digits.
 267  *
 268  * DESCRIPTION: Calculate the number of digits needed to represent the Value
 269  *              in the given Base (Radix)
 270  *
 271  ******************************************************************************/
 272
 273 static u32 acpi_ex_digits_needed(u64 value, u32 base)
 274 {
 275         u32 num_digits;
 276         u64 current_value;
 277
 278         ACPI_FUNCTION_TRACE(ex_digits_needed);
 279
 280         /* u64 is unsigned, so we don't worry about a '-' prefix */
 281
 282         if (value == 0) {
 283                 return_UINT32(1);
 284         }
 285
 286         current_value = value;
 287         num_digits = 0;
 288
 289         /* Count the digits in the requested base */
 290
 291         while (current_value) {
 292                 (void)acpi_ut_short_divide(current_value, base, &current_value,
 293                                            NULL);
 294                 num_digits++;
 295         }
 296
 297         return_UINT32(num_digits);
 298 }
 299
 300 /*******************************************************************************
 301  *
 302  * FUNCTION:    acpi_ex_eisa_id_to_string
 303  *
 304  * PARAMETERS:  compressed_id   - EISAID to be converted
 305  *              out_string      - Where to put the converted string (8 bytes)
 306  *
 307  * RETURN:      None
 308  *
 309  * DESCRIPTION: Convert a numeric EISAID to string representation. Return
 310  *              buffer must be large enough to hold the string. The string
 311  *              returned is always exactly of length ACPI_EISAID_STRING_SIZE
 312  *              (includes null terminator). The EISAID is always 32 bits.
 313  *
 314  ******************************************************************************/
 315
 316 void acpi_ex_eisa_id_to_string(char *out_string, u64 compressed_id)
 317 {
 318         u32 swapped_id;
 319
 320         ACPI_FUNCTION_ENTRY();
 321
 322         /* The EISAID should be a 32-bit integer */
 323
 324         if (compressed_id > ACPI_UINT32_MAX) {
 325                 ACPI_WARNING((AE_INFO,
 326                               "Expected EISAID is larger than 32 bits: 0x%8.8X%8.8X, truncating",
 327                               ACPI_FORMAT_UINT64(compressed_id)));
 328         }
 329
 330         /* Swap ID to big-endian to get contiguous bits */
 331
 332         swapped_id = acpi_ut_dword_byte_swap((u32)compressed_id);
 333
 334         /* First 3 bytes are uppercase letters. Next 4 bytes are hexadecimal */
 335
 336         out_string[0] =
 337             (char)(0x40 + (((unsigned long)swapped_id >> 26) & 0x1F));
 338         out_string[1] = (char)(0x40 + ((swapped_id >> 21) & 0x1F));
 339         out_string[2] = (char)(0x40 + ((swapped_id >> 16) & 0x1F));
 340         out_string[3] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 12);
 341         out_string[4] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 8);
 342         out_string[5] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 4);
 343         out_string[6] = acpi_ut_hex_to_ascii_char((u64) swapped_id, 0);
 344         out_string[7] = 0;
 345 }
 346
 347 /*******************************************************************************
 348  *
 349  * FUNCTION:    acpi_ex_integer_to_string
 350  *
 351  * PARAMETERS:  out_string      - Where to put the converted string. At least
 352  *                                21 bytes are needed to hold the largest
 353  *                                possible 64-bit integer.
 354  *              value           - Value to be converted
 355  *
 356  * RETURN:      None, string
 357  *
 358  * DESCRIPTION: Convert a 64-bit integer to decimal string representation.
 359  *              Assumes string buffer is large enough to hold the string. The
 360  *              largest string is (ACPI_MAX64_DECIMAL_DIGITS + 1).
 361  *
 362  ******************************************************************************/
 363
 364 void acpi_ex_integer_to_string(char *out_string, u64 value)
 365 {
 366         u32 count;
 367         u32 digits_needed;
 368         u32 remainder;
 369
 370         ACPI_FUNCTION_ENTRY();
 371
 372         digits_needed = acpi_ex_digits_needed(value, 10);
 373         out_string[digits_needed] = 0;
 374
 375         for (count = digits_needed; count > 0; count--) {
 376                 (void)acpi_ut_short_divide(value, 10, &value, &remainder);
 377                 out_string[count - 1] = (char)('0' + remainder);
 378         }
 379 }
 380
 381 /*******************************************************************************
 382  *
 383  * FUNCTION:    acpi_ex_pci_cls_to_string
 384  *
 385  * PARAMETERS:  out_string      - Where to put the converted string (7 bytes)
 386  * PARAMETERS:  class_code      - PCI class code to be converted (3 bytes)
 387  *
 388  * RETURN:      None
 389  *
 390  * DESCRIPTION: Convert 3-bytes PCI class code to string representation.
 391  *              Return buffer must be large enough to hold the string. The
 392  *              string returned is always exactly of length
 393  *              ACPI_PCICLS_STRING_SIZE (includes null terminator).
 394  *
 395  ******************************************************************************/
 396
 397 void acpi_ex_pci_cls_to_string(char *out_string, u8 class_code[3])
 398 {
 399
 400         ACPI_FUNCTION_ENTRY();
 401
 402         /* All 3 bytes are hexadecimal */
 403
 404         out_string[0] = acpi_ut_hex_to_ascii_char((u64)class_code[0], 4);
 405         out_string[1] = acpi_ut_hex_to_ascii_char((u64)class_code[0], 0);
 406         out_string[2] = acpi_ut_hex_to_ascii_char((u64)class_code[1], 4);
 407         out_string[3] = acpi_ut_hex_to_ascii_char((u64)class_code[1], 0);
 408         out_string[4] = acpi_ut_hex_to_ascii_char((u64)class_code[2], 4);
 409         out_string[5] = acpi_ut_hex_to_ascii_char((u64)class_code[2], 0);
 410         out_string[6] = 0;
 411 }
 412
 413 /*******************************************************************************
 414  *
 415  * FUNCTION:    acpi_is_valid_space_id
 416  *
 417  * PARAMETERS:  space_id            - ID to be validated
 418  *
 419  * RETURN:      TRUE if valid/supported ID.
 420  *
 421  * DESCRIPTION: Validate an operation region space_ID.
 422  *
 423  ******************************************************************************/
 424
 425 u8 acpi_is_valid_space_id(u8 space_id)
 426 {
 427
 428         if ((space_id >= ACPI_NUM_PREDEFINED_REGIONS) &&
 429             (space_id < ACPI_USER_REGION_BEGIN) &&
 430             (space_id != ACPI_ADR_SPACE_DATA_TABLE) &&
 431             (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 432                 return (FALSE);
 433         }
 434
 435         return (TRUE);
 436 }
 437
 438 #endif