drivers/acpi/acpica/psargs.c

   1 /******************************************************************************
   2  *
   3  * Module Name: psargs - Parse AML opcode arguments
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2015, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acparser.h"
  47 #include "amlcode.h"
  48 #include "acnamesp.h"
  49 #include "acdispat.h"
  50
  51 #define _COMPONENT          ACPI_PARSER
  52 ACPI_MODULE_NAME("psargs")
  53
  54 /* Local prototypes */
  55 static u32
  56 acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state);
  57
  58 static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
  59                                                        *parser_state);
  60
  61 /*******************************************************************************
  62  *
  63  * FUNCTION:    acpi_ps_get_next_package_length
  64  *
  65  * PARAMETERS:  parser_state        - Current parser state object
  66  *
  67  * RETURN:      Decoded package length. On completion, the AML pointer points
  68  *              past the length byte or bytes.
  69  *
  70  * DESCRIPTION: Decode and return a package length field.
  71  *              Note: Largest package length is 28 bits, from ACPI specification
  72  *
  73  ******************************************************************************/
  74
  75 static u32
  76 acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state)
  77 {
  78         u8 *aml = parser_state->aml;
  79         u32 package_length = 0;
  80         u32 byte_count;
  81         u8 byte_zero_mask = 0x3F;       /* Default [0:5] */
  82
  83         ACPI_FUNCTION_TRACE(ps_get_next_package_length);
  84
  85         /*
  86          * Byte 0 bits [6:7] contain the number of additional bytes
  87          * used to encode the package length, either 0,1,2, or 3
  88          */
  89         byte_count = (aml[0] >> 6);
  90         parser_state->aml += ((acpi_size) byte_count + 1);
  91
  92         /* Get bytes 3, 2, 1 as needed */
  93
  94         while (byte_count) {
  95                 /*
  96                  * Final bit positions for the package length bytes:
  97                  *      Byte3->[20:27]
  98                  *      Byte2->[12:19]
  99                  *      Byte1->[04:11]
 100                  *      Byte0->[00:03]
 101                  */
 102                 package_length |= (aml[byte_count] << ((byte_count << 3) - 4));
 103
 104                 byte_zero_mask = 0x0F;  /* Use bits [0:3] of byte 0 */
 105                 byte_count--;
 106         }
 107
 108         /* Byte 0 is a special case, either bits [0:3] or [0:5] are used */
 109
 110         package_length |= (aml[0] & byte_zero_mask);
 111         return_UINT32(package_length);
 112 }
 113
 114 /*******************************************************************************
 115  *
 116  * FUNCTION:    acpi_ps_get_next_package_end
 117  *
 118  * PARAMETERS:  parser_state        - Current parser state object
 119  *
 120  * RETURN:      Pointer to end-of-package +1
 121  *
 122  * DESCRIPTION: Get next package length and return a pointer past the end of
 123  *              the package. Consumes the package length field
 124  *
 125  ******************************************************************************/
 126
 127 u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state)
 128 {
 129         u8 *start = parser_state->aml;
 130         u32 package_length;
 131
 132         ACPI_FUNCTION_TRACE(ps_get_next_package_end);
 133
 134         /* Function below updates parser_state->Aml */
 135
 136         package_length = acpi_ps_get_next_package_length(parser_state);
 137
 138         return_PTR(start + package_length);     /* end of package */
 139 }
 140
 141 /*******************************************************************************
 142  *
 143  * FUNCTION:    acpi_ps_get_next_namestring
 144  *
 145  * PARAMETERS:  parser_state        - Current parser state object
 146  *
 147  * RETURN:      Pointer to the start of the name string (pointer points into
 148  *              the AML.
 149  *
 150  * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
 151  *              prefix characters. Set parser state to point past the string.
 152  *              (Name is consumed from the AML.)
 153  *
 154  ******************************************************************************/
 155
 156 char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
 157 {
 158         u8 *start = parser_state->aml;
 159         u8 *end = parser_state->aml;
 160
 161         ACPI_FUNCTION_TRACE(ps_get_next_namestring);
 162
 163         /* Point past any namestring prefix characters (backslash or carat) */
 164
 165         while (ACPI_IS_ROOT_PREFIX(*end) || ACPI_IS_PARENT_PREFIX(*end)) {
 166                 end++;
 167         }
 168
 169         /* Decode the path prefix character */
 170
 171         switch (*end) {
 172         case 0:
 173
 174                 /* null_name */
 175
 176                 if (end == start) {
 177                         start = NULL;
 178                 }
 179                 end++;
 180                 break;
 181
 182         case AML_DUAL_NAME_PREFIX:
 183
 184                 /* Two name segments */
 185
 186                 end += 1 + (2 * ACPI_NAME_SIZE);
 187                 break;
 188
 189         case AML_MULTI_NAME_PREFIX_OP:
 190
 191                 /* Multiple name segments, 4 chars each, count in next byte */
 192
 193                 end += 2 + (*(end + 1) * ACPI_NAME_SIZE);
 194                 break;
 195
 196         default:
 197
 198                 /* Single name segment */
 199
 200                 end += ACPI_NAME_SIZE;
 201                 break;
 202         }
 203
 204         parser_state->aml = end;
 205         return_PTR((char *)start);
 206 }
 207
 208 /*******************************************************************************
 209  *
 210  * FUNCTION:    acpi_ps_get_next_namepath
 211  *
 212  * PARAMETERS:  parser_state        - Current parser state object
 213  *              arg                 - Where the namepath will be stored
 214  *              arg_count           - If the namepath points to a control method
 215  *                                    the method's argument is returned here.
 216  *              possible_method_call - Whether the namepath can possibly be the
 217  *                                    start of a method call
 218  *
 219  * RETURN:      Status
 220  *
 221  * DESCRIPTION: Get next name (if method call, return # of required args).
 222  *              Names are looked up in the internal namespace to determine
 223  *              if the name represents a control method. If a method
 224  *              is found, the number of arguments to the method is returned.
 225  *              This information is critical for parsing to continue correctly.
 226  *
 227  ******************************************************************************/
 228
 229 acpi_status
 230 acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
 231                           struct acpi_parse_state *parser_state,
 232                           union acpi_parse_object *arg, u8 possible_method_call)
 233 {
 234         acpi_status status;
 235         char *path;
 236         union acpi_parse_object *name_op;
 237         union acpi_operand_object *method_desc;
 238         struct acpi_namespace_node *node;
 239         u8 *start = parser_state->aml;
 240
 241         ACPI_FUNCTION_TRACE(ps_get_next_namepath);
 242
 243         path = acpi_ps_get_next_namestring(parser_state);
 244         acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
 245
 246         /* Null path case is allowed, just exit */
 247
 248         if (!path) {
 249                 arg->common.value.name = path;
 250                 return_ACPI_STATUS(AE_OK);
 251         }
 252
 253         /*
 254          * Lookup the name in the internal namespace, starting with the current
 255          * scope. We don't want to add anything new to the namespace here,
 256          * however, so we use MODE_EXECUTE.
 257          * Allow searching of the parent tree, but don't open a new scope -
 258          * we just want to lookup the object (must be mode EXECUTE to perform
 259          * the upsearch)
 260          */
 261         status = acpi_ns_lookup(walk_state->scope_info, path,
 262                                 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
 263                                 ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
 264                                 NULL, &node);
 265
 266         /*
 267          * If this name is a control method invocation, we must
 268          * setup the method call
 269          */
 270         if (ACPI_SUCCESS(status) &&
 271             possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
 272                 if (walk_state->opcode == AML_UNLOAD_OP) {
 273                         /*
 274                          * acpi_ps_get_next_namestring has increased the AML pointer,
 275                          * so we need to restore the saved AML pointer for method call.
 276                          */
 277                         walk_state->parser_state.aml = start;
 278                         walk_state->arg_count = 1;
 279                         acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
 280                         return_ACPI_STATUS(AE_OK);
 281                 }
 282
 283                 /* This name is actually a control method invocation */
 284
 285                 method_desc = acpi_ns_get_attached_object(node);
 286                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
 287                                   "Control Method - %p Desc %p Path=%p\n", node,
 288                                   method_desc, path));
 289
 290                 name_op = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP, start);
 291                 if (!name_op) {
 292                         return_ACPI_STATUS(AE_NO_MEMORY);
 293                 }
 294
 295                 /* Change Arg into a METHOD CALL and attach name to it */
 296
 297                 acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
 298                 name_op->common.value.name = path;
 299
 300                 /* Point METHODCALL/NAME to the METHOD Node */
 301
 302                 name_op->common.node = node;
 303                 acpi_ps_append_arg(arg, name_op);
 304
 305                 if (!method_desc) {
 306                         ACPI_ERROR((AE_INFO,
 307                                     "Control Method %p has no attached object",
 308                                     node));
 309                         return_ACPI_STATUS(AE_AML_INTERNAL);
 310                 }
 311
 312                 ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
 313                                   "Control Method - %p Args %X\n",
 314                                   node, method_desc->method.param_count));
 315
 316                 /* Get the number of arguments to expect */
 317
 318                 walk_state->arg_count = method_desc->method.param_count;
 319                 return_ACPI_STATUS(AE_OK);
 320         }
 321
 322         /*
 323          * Special handling if the name was not found during the lookup -
 324          * some not_found cases are allowed
 325          */
 326         if (status == AE_NOT_FOUND) {
 327
 328                 /* 1) not_found is ok during load pass 1/2 (allow forward references) */
 329
 330                 if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) !=
 331                     ACPI_PARSE_EXECUTE) {
 332                         status = AE_OK;
 333                 }
 334
 335                 /* 2) not_found during a cond_ref_of(x) is ok by definition */
 336
 337                 else if (walk_state->op->common.aml_opcode ==
 338                          AML_COND_REF_OF_OP) {
 339                         status = AE_OK;
 340                 }
 341
 342                 /*
 343                  * 3) not_found while building a Package is ok at this point, we
 344                  * may flag as an error later if slack mode is not enabled.
 345                  * (Some ASL code depends on allowing this behavior)
 346                  */
 347                 else if ((arg->common.parent) &&
 348                          ((arg->common.parent->common.aml_opcode ==
 349                            AML_PACKAGE_OP)
 350                           || (arg->common.parent->common.aml_opcode ==
 351                               AML_VAR_PACKAGE_OP))) {
 352                         status = AE_OK;
 353                 }
 354         }
 355
 356         /* Final exception check (may have been changed from code above) */
 357
 358         if (ACPI_FAILURE(status)) {
 359                 ACPI_ERROR_NAMESPACE(path, status);
 360
 361                 if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
 362                     ACPI_PARSE_EXECUTE) {
 363
 364                         /* Report a control method execution error */
 365
 366                         status = acpi_ds_method_error(status, walk_state);
 367                 }
 368         }
 369
 370         /* Save the namepath */
 371
 372         arg->common.value.name = path;
 373         return_ACPI_STATUS(status);
 374 }
 375
 376 /*******************************************************************************
 377  *
 378  * FUNCTION:    acpi_ps_get_next_simple_arg
 379  *
 380  * PARAMETERS:  parser_state        - Current parser state object
 381  *              arg_type            - The argument type (AML_*_ARG)
 382  *              arg                 - Where the argument is returned
 383  *
 384  * RETURN:      None
 385  *
 386  * DESCRIPTION: Get the next simple argument (constant, string, or namestring)
 387  *
 388  ******************************************************************************/
 389
 390 void
 391 acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
 392                             u32 arg_type, union acpi_parse_object *arg)
 393 {
 394         u32 length;
 395         u16 opcode;
 396         u8 *aml = parser_state->aml;
 397
 398         ACPI_FUNCTION_TRACE_U32(ps_get_next_simple_arg, arg_type);
 399
 400         switch (arg_type) {
 401         case ARGP_BYTEDATA:
 402
 403                 /* Get 1 byte from the AML stream */
 404
 405                 opcode = AML_BYTE_OP;
 406                 arg->common.value.integer = (u64) *aml;
 407                 length = 1;
 408                 break;
 409
 410         case ARGP_WORDDATA:
 411
 412                 /* Get 2 bytes from the AML stream */
 413
 414                 opcode = AML_WORD_OP;
 415                 ACPI_MOVE_16_TO_64(&arg->common.value.integer, aml);
 416                 length = 2;
 417                 break;
 418
 419         case ARGP_DWORDDATA:
 420
 421                 /* Get 4 bytes from the AML stream */
 422
 423                 opcode = AML_DWORD_OP;
 424                 ACPI_MOVE_32_TO_64(&arg->common.value.integer, aml);
 425                 length = 4;
 426                 break;
 427
 428         case ARGP_QWORDDATA:
 429
 430                 /* Get 8 bytes from the AML stream */
 431
 432                 opcode = AML_QWORD_OP;
 433                 ACPI_MOVE_64_TO_64(&arg->common.value.integer, aml);
 434                 length = 8;
 435                 break;
 436
 437         case ARGP_CHARLIST:
 438
 439                 /* Get a pointer to the string, point past the string */
 440
 441                 opcode = AML_STRING_OP;
 442                 arg->common.value.string = ACPI_CAST_PTR(char, aml);
 443
 444                 /* Find the null terminator */
 445
 446                 length = 0;
 447                 while (aml[length]) {
 448                         length++;
 449                 }
 450                 length++;
 451                 break;
 452
 453         case ARGP_NAME:
 454         case ARGP_NAMESTRING:
 455
 456                 acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
 457                 arg->common.value.name =
 458                     acpi_ps_get_next_namestring(parser_state);
 459                 return_VOID;
 460
 461         default:
 462
 463                 ACPI_ERROR((AE_INFO, "Invalid ArgType 0x%X", arg_type));
 464                 return_VOID;
 465         }
 466
 467         acpi_ps_init_op(arg, opcode);
 468         parser_state->aml += length;
 469         return_VOID;
 470 }
 471
 472 /*******************************************************************************
 473  *
 474  * FUNCTION:    acpi_ps_get_next_field
 475  *
 476  * PARAMETERS:  parser_state        - Current parser state object
 477  *
 478  * RETURN:      A newly allocated FIELD op
 479  *
 480  * DESCRIPTION: Get next field (named_field, reserved_field, or access_field)
 481  *
 482  ******************************************************************************/
 483
 484 static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
 485                                                        *parser_state)
 486 {
 487         u8 *aml;
 488         union acpi_parse_object *field;
 489         union acpi_parse_object *arg = NULL;
 490         u16 opcode;
 491         u32 name;
 492         u8 access_type;
 493         u8 access_attribute;
 494         u8 access_length;
 495         u32 pkg_length;
 496         u8 *pkg_end;
 497         u32 buffer_length;
 498
 499         ACPI_FUNCTION_TRACE(ps_get_next_field);
 500
 501         aml = parser_state->aml;
 502
 503         /* Determine field type */
 504
 505         switch (ACPI_GET8(parser_state->aml)) {
 506         case AML_FIELD_OFFSET_OP:
 507
 508                 opcode = AML_INT_RESERVEDFIELD_OP;
 509                 parser_state->aml++;
 510                 break;
 511
 512         case AML_FIELD_ACCESS_OP:
 513
 514                 opcode = AML_INT_ACCESSFIELD_OP;
 515                 parser_state->aml++;
 516                 break;
 517
 518         case AML_FIELD_CONNECTION_OP:
 519
 520                 opcode = AML_INT_CONNECTION_OP;
 521                 parser_state->aml++;
 522                 break;
 523
 524         case AML_FIELD_EXT_ACCESS_OP:
 525
 526                 opcode = AML_INT_EXTACCESSFIELD_OP;
 527                 parser_state->aml++;
 528                 break;
 529
 530         default:
 531
 532                 opcode = AML_INT_NAMEDFIELD_OP;
 533                 break;
 534         }
 535
 536         /* Allocate a new field op */
 537
 538         field = acpi_ps_alloc_op(opcode, aml);
 539         if (!field) {
 540                 return_PTR(NULL);
 541         }
 542
 543         /* Decode the field type */
 544
 545         switch (opcode) {
 546         case AML_INT_NAMEDFIELD_OP:
 547
 548                 /* Get the 4-character name */
 549
 550                 ACPI_MOVE_32_TO_32(&name, parser_state->aml);
 551                 acpi_ps_set_name(field, name);
 552                 parser_state->aml += ACPI_NAME_SIZE;
 553
 554                 /* Get the length which is encoded as a package length */
 555
 556                 field->common.value.size =
 557                     acpi_ps_get_next_package_length(parser_state);
 558                 break;
 559
 560         case AML_INT_RESERVEDFIELD_OP:
 561
 562                 /* Get the length which is encoded as a package length */
 563
 564                 field->common.value.size =
 565                     acpi_ps_get_next_package_length(parser_state);
 566                 break;
 567
 568         case AML_INT_ACCESSFIELD_OP:
 569         case AML_INT_EXTACCESSFIELD_OP:
 570
 571                 /*
 572                  * Get access_type and access_attrib and merge into the field Op
 573                  * access_type is first operand, access_attribute is second. stuff
 574                  * these bytes into the node integer value for convenience.
 575                  */
 576
 577                 /* Get the two bytes (Type/Attribute) */
 578
 579                 access_type = ACPI_GET8(parser_state->aml);
 580                 parser_state->aml++;
 581                 access_attribute = ACPI_GET8(parser_state->aml);
 582                 parser_state->aml++;
 583
 584                 field->common.value.integer = (u8)access_type;
 585                 field->common.value.integer |= (u16)(access_attribute << 8);
 586
 587                 /* This opcode has a third byte, access_length */
 588
 589                 if (opcode == AML_INT_EXTACCESSFIELD_OP) {
 590                         access_length = ACPI_GET8(parser_state->aml);
 591                         parser_state->aml++;
 592
 593                         field->common.value.integer |=
 594                             (u32)(access_length << 16);
 595                 }
 596                 break;
 597
 598         case AML_INT_CONNECTION_OP:
 599
 600                 /*
 601                  * Argument for Connection operator can be either a Buffer
 602                  * (resource descriptor), or a name_string.
 603                  */
 604                 aml = parser_state->aml;
 605                 if (ACPI_GET8(parser_state->aml) == AML_BUFFER_OP) {
 606                         parser_state->aml++;
 607
 608                         pkg_end = parser_state->aml;
 609                         pkg_length =
 610                             acpi_ps_get_next_package_length(parser_state);
 611                         pkg_end += pkg_length;
 612
 613                         if (parser_state->aml < pkg_end) {
 614
 615                                 /* Non-empty list */
 616
 617                                 arg =
 618                                     acpi_ps_alloc_op(AML_INT_BYTELIST_OP, aml);
 619                                 if (!arg) {
 620                                         acpi_ps_free_op(field);
 621                                         return_PTR(NULL);
 622                                 }
 623
 624                                 /* Get the actual buffer length argument */
 625
 626                                 opcode = ACPI_GET8(parser_state->aml);
 627                                 parser_state->aml++;
 628
 629                                 switch (opcode) {
 630                                 case AML_BYTE_OP:       /* AML_BYTEDATA_ARG */
 631
 632                                         buffer_length =
 633                                             ACPI_GET8(parser_state->aml);
 634                                         parser_state->aml += 1;
 635                                         break;
 636
 637                                 case AML_WORD_OP:       /* AML_WORDDATA_ARG */
 638
 639                                         buffer_length =
 640                                             ACPI_GET16(parser_state->aml);
 641                                         parser_state->aml += 2;
 642                                         break;
 643
 644                                 case AML_DWORD_OP:      /* AML_DWORDATA_ARG */
 645
 646                                         buffer_length =
 647                                             ACPI_GET32(parser_state->aml);
 648                                         parser_state->aml += 4;
 649                                         break;
 650
 651                                 default:
 652
 653                                         buffer_length = 0;
 654                                         break;
 655                                 }
 656
 657                                 /* Fill in bytelist data */
 658
 659                                 arg->named.value.size = buffer_length;
 660                                 arg->named.data = parser_state->aml;
 661                         }
 662
 663                         /* Skip to End of byte data */
 664
 665                         parser_state->aml = pkg_end;
 666                 } else {
 667                         arg = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP, aml);
 668                         if (!arg) {
 669                                 acpi_ps_free_op(field);
 670                                 return_PTR(NULL);
 671                         }
 672
 673                         /* Get the Namestring argument */
 674
 675                         arg->common.value.name =
 676                             acpi_ps_get_next_namestring(parser_state);
 677                 }
 678
 679                 /* Link the buffer/namestring to parent (CONNECTION_OP) */
 680
 681                 acpi_ps_append_arg(field, arg);
 682                 break;
 683
 684         default:
 685
 686                 /* Opcode was set in previous switch */
 687                 break;
 688         }
 689
 690         return_PTR(field);
 691 }
 692
 693 /*******************************************************************************
 694  *
 695  * FUNCTION:    acpi_ps_get_next_arg
 696  *
 697  * PARAMETERS:  walk_state          - Current state
 698  *              parser_state        - Current parser state object
 699  *              arg_type            - The argument type (AML_*_ARG)
 700  *              return_arg          - Where the next arg is returned
 701  *
 702  * RETURN:      Status, and an op object containing the next argument.
 703  *
 704  * DESCRIPTION: Get next argument (including complex list arguments that require
 705  *              pushing the parser stack)
 706  *
 707  ******************************************************************************/
 708
 709 acpi_status
 710 acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 711                      struct acpi_parse_state *parser_state,
 712                      u32 arg_type, union acpi_parse_object **return_arg)
 713 {
 714         union acpi_parse_object *arg = NULL;
 715         union acpi_parse_object *prev = NULL;
 716         union acpi_parse_object *field;
 717         u32 subop;
 718         acpi_status status = AE_OK;
 719
 720         ACPI_FUNCTION_TRACE_PTR(ps_get_next_arg, parser_state);
 721
 722         switch (arg_type) {
 723         case ARGP_BYTEDATA:
 724         case ARGP_WORDDATA:
 725         case ARGP_DWORDDATA:
 726         case ARGP_CHARLIST:
 727         case ARGP_NAME:
 728         case ARGP_NAMESTRING:
 729
 730                 /* Constants, strings, and namestrings are all the same size */
 731
 732                 arg = acpi_ps_alloc_op(AML_BYTE_OP, parser_state->aml);
 733                 if (!arg) {
 734                         return_ACPI_STATUS(AE_NO_MEMORY);
 735                 }
 736                 acpi_ps_get_next_simple_arg(parser_state, arg_type, arg);
 737                 break;
 738
 739         case ARGP_PKGLENGTH:
 740
 741                 /* Package length, nothing returned */
 742
 743                 parser_state->pkg_end =
 744                     acpi_ps_get_next_package_end(parser_state);
 745                 break;
 746
 747         case ARGP_FIELDLIST:
 748
 749                 if (parser_state->aml < parser_state->pkg_end) {
 750
 751                         /* Non-empty list */
 752
 753                         while (parser_state->aml < parser_state->pkg_end) {
 754                                 field = acpi_ps_get_next_field(parser_state);
 755                                 if (!field) {
 756                                         return_ACPI_STATUS(AE_NO_MEMORY);
 757                                 }
 758
 759                                 if (prev) {
 760                                         prev->common.next = field;
 761                                 } else {
 762                                         arg = field;
 763                                 }
 764                                 prev = field;
 765                         }
 766
 767                         /* Skip to End of byte data */
 768
 769                         parser_state->aml = parser_state->pkg_end;
 770                 }
 771                 break;
 772
 773         case ARGP_BYTELIST:
 774
 775                 if (parser_state->aml < parser_state->pkg_end) {
 776
 777                         /* Non-empty list */
 778
 779                         arg = acpi_ps_alloc_op(AML_INT_BYTELIST_OP,
 780                                                parser_state->aml);
 781                         if (!arg) {
 782                                 return_ACPI_STATUS(AE_NO_MEMORY);
 783                         }
 784
 785                         /* Fill in bytelist data */
 786
 787                         arg->common.value.size = (u32)
 788                             ACPI_PTR_DIFF(parser_state->pkg_end,
 789                                           parser_state->aml);
 790                         arg->named.data = parser_state->aml;
 791
 792                         /* Skip to End of byte data */
 793
 794                         parser_state->aml = parser_state->pkg_end;
 795                 }
 796                 break;
 797
 798         case ARGP_TARGET:
 799         case ARGP_SUPERNAME:
 800         case ARGP_SIMPLENAME:
 801
 802                 subop = acpi_ps_peek_opcode(parser_state);
 803                 if (subop == 0 ||
 804                     acpi_ps_is_leading_char(subop) ||
 805                     ACPI_IS_ROOT_PREFIX(subop) ||
 806                     ACPI_IS_PARENT_PREFIX(subop)) {
 807
 808                         /* null_name or name_string */
 809
 810                         arg =
 811                             acpi_ps_alloc_op(AML_INT_NAMEPATH_OP,
 812                                              parser_state->aml);
 813                         if (!arg) {
 814                                 return_ACPI_STATUS(AE_NO_MEMORY);
 815                         }
 816
 817                         /* To support super_name arg of Unload */
 818
 819                         if (walk_state->opcode == AML_UNLOAD_OP) {
 820                                 status =
 821                                     acpi_ps_get_next_namepath(walk_state,
 822                                                               parser_state, arg,
 823                                                               1);
 824
 825                                 /*
 826                                  * If the super_name arg of Unload is a method call,
 827                                  * we have restored the AML pointer, just free this Arg
 828                                  */
 829                                 if (arg->common.aml_opcode ==
 830                                     AML_INT_METHODCALL_OP) {
 831                                         acpi_ps_free_op(arg);
 832                                         arg = NULL;
 833                                 }
 834                         } else {
 835                                 status =
 836                                     acpi_ps_get_next_namepath(walk_state,
 837                                                               parser_state, arg,
 838                                                               0);
 839                         }
 840                 } else {
 841                         /* Single complex argument, nothing returned */
 842
 843                         walk_state->arg_count = 1;
 844                 }
 845                 break;
 846
 847         case ARGP_DATAOBJ:
 848         case ARGP_TERMARG:
 849
 850                 /* Single complex argument, nothing returned */
 851
 852                 walk_state->arg_count = 1;
 853                 break;
 854
 855         case ARGP_DATAOBJLIST:
 856         case ARGP_TERMLIST:
 857         case ARGP_OBJLIST:
 858
 859                 if (parser_state->aml < parser_state->pkg_end) {
 860
 861                         /* Non-empty list of variable arguments, nothing returned */
 862
 863                         walk_state->arg_count = ACPI_VAR_ARGS;
 864                 }
 865                 break;
 866
 867         default:
 868
 869                 ACPI_ERROR((AE_INFO, "Invalid ArgType: 0x%X", arg_type));
 870                 status = AE_AML_OPERAND_TYPE;
 871                 break;
 872         }
 873
 874         *return_arg = arg;
 875         return_ACPI_STATUS(status);
 876 }