scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size
[linux/fpc-iii.git] / drivers / watchdog / ux500_wdt.c
blob37c084353cce238f4e694a1be1520727530503c7
1 /*
2 * Copyright (C) ST-Ericsson SA 2011-2013
4 * License Terms: GNU General Public License v2
6 * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson
7 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
8 */
10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/moduleparam.h>
15 #include <linux/err.h>
16 #include <linux/uaccess.h>
17 #include <linux/watchdog.h>
18 #include <linux/platform_device.h>
19 #include <linux/platform_data/ux500_wdt.h>
21 #include <linux/mfd/dbx500-prcmu.h>
23 #define WATCHDOG_TIMEOUT 600 /* 10 minutes */
25 #define WATCHDOG_MIN 0
26 #define WATCHDOG_MAX28 268435 /* 28 bit resolution in ms == 268435.455 s */
27 #define WATCHDOG_MAX32 4294967 /* 32 bit resolution in ms == 4294967.295 s */
29 static unsigned int timeout = WATCHDOG_TIMEOUT;
30 module_param(timeout, uint, 0);
31 MODULE_PARM_DESC(timeout,
32 "Watchdog timeout in seconds. default="
33 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
35 static bool nowayout = WATCHDOG_NOWAYOUT;
36 module_param(nowayout, bool, 0);
37 MODULE_PARM_DESC(nowayout,
38 "Watchdog cannot be stopped once started (default="
39 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
41 static int ux500_wdt_start(struct watchdog_device *wdd)
43 return prcmu_enable_a9wdog(PRCMU_WDOG_ALL);
46 static int ux500_wdt_stop(struct watchdog_device *wdd)
48 return prcmu_disable_a9wdog(PRCMU_WDOG_ALL);
51 static int ux500_wdt_keepalive(struct watchdog_device *wdd)
53 return prcmu_kick_a9wdog(PRCMU_WDOG_ALL);
56 static int ux500_wdt_set_timeout(struct watchdog_device *wdd,
57 unsigned int timeout)
59 ux500_wdt_stop(wdd);
60 prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
61 ux500_wdt_start(wdd);
63 return 0;
66 static const struct watchdog_info ux500_wdt_info = {
67 .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
68 .identity = "Ux500 WDT",
69 .firmware_version = 1,
72 static const struct watchdog_ops ux500_wdt_ops = {
73 .owner = THIS_MODULE,
74 .start = ux500_wdt_start,
75 .stop = ux500_wdt_stop,
76 .ping = ux500_wdt_keepalive,
77 .set_timeout = ux500_wdt_set_timeout,
80 static struct watchdog_device ux500_wdt = {
81 .info = &ux500_wdt_info,
82 .ops = &ux500_wdt_ops,
83 .min_timeout = WATCHDOG_MIN,
84 .max_timeout = WATCHDOG_MAX32,
87 static int ux500_wdt_probe(struct platform_device *pdev)
89 int ret;
90 struct ux500_wdt_data *pdata = dev_get_platdata(&pdev->dev);
92 if (pdata) {
93 if (pdata->timeout > 0)
94 timeout = pdata->timeout;
95 if (pdata->has_28_bits_resolution)
96 ux500_wdt.max_timeout = WATCHDOG_MAX28;
99 ux500_wdt.parent = &pdev->dev;
100 watchdog_set_nowayout(&ux500_wdt, nowayout);
102 /* disable auto off on sleep */
103 prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
105 /* set HW initial value */
106 prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
108 ret = watchdog_register_device(&ux500_wdt);
109 if (ret)
110 return ret;
112 dev_info(&pdev->dev, "initialized\n");
114 return 0;
117 static int ux500_wdt_remove(struct platform_device *dev)
119 watchdog_unregister_device(&ux500_wdt);
121 return 0;
124 #ifdef CONFIG_PM
125 static int ux500_wdt_suspend(struct platform_device *pdev,
126 pm_message_t state)
128 if (watchdog_active(&ux500_wdt)) {
129 ux500_wdt_stop(&ux500_wdt);
130 prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true);
132 prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
133 ux500_wdt_start(&ux500_wdt);
135 return 0;
138 static int ux500_wdt_resume(struct platform_device *pdev)
140 if (watchdog_active(&ux500_wdt)) {
141 ux500_wdt_stop(&ux500_wdt);
142 prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
144 prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
145 ux500_wdt_start(&ux500_wdt);
147 return 0;
149 #else
150 #define ux500_wdt_suspend NULL
151 #define ux500_wdt_resume NULL
152 #endif
154 static struct platform_driver ux500_wdt_driver = {
155 .probe = ux500_wdt_probe,
156 .remove = ux500_wdt_remove,
157 .suspend = ux500_wdt_suspend,
158 .resume = ux500_wdt_resume,
159 .driver = {
160 .name = "ux500_wdt",
164 module_platform_driver(ux500_wdt_driver);
166 MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>");
167 MODULE_DESCRIPTION("Ux500 Watchdog Driver");
168 MODULE_LICENSE("GPL");
169 MODULE_ALIAS("platform:ux500_wdt");