drivers/scsi/nsp32.h

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver
   4  * Basic data header
   5 */
   6
   7 #ifndef _NSP32_H
   8 #define _NSP32_H
   9
  10 //#define NSP32_DEBUG 9
  11
  12 /*
  13  * VENDOR/DEVICE ID
  14  */
  15 #define PCI_VENDOR_ID_IODATA  0x10fc
  16 #define PCI_VENDOR_ID_WORKBIT 0x1145
  17
  18 #define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II   0x0005
  19 #define PCI_DEVICE_ID_NINJASCSI_32BI_KME       0xf007
  20 #define PCI_DEVICE_ID_NINJASCSI_32BI_WBT       0x8007
  21 #define PCI_DEVICE_ID_WORKBIT_STANDARD         0xf010
  22 #define PCI_DEVICE_ID_WORKBIT_DUALEDGE         0xf011
  23 #define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC   0xf012
  24 #define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC  0xf013
  25 #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO    0xf015
  26 #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009
  27
  28 /*
  29  * MODEL
  30  */
  31 enum {
  32         MODEL_IODATA        = 0,
  33         MODEL_KME           = 1,
  34         MODEL_WORKBIT       = 2,
  35         MODEL_LOGITEC       = 3,
  36         MODEL_PCI_WORKBIT   = 4,
  37         MODEL_PCI_LOGITEC   = 5,
  38         MODEL_PCI_MELCO     = 6,
  39 };
  40
  41 static char * nsp32_model[] = {
  42         "I-O DATA CBSC-II CardBus card",
  43         "KME SCSI CardBus card",
  44         "Workbit duo SCSI CardBus card",
  45         "Logitec CardBus card with external ROM",
  46         "Workbit / I-O DATA PCI card",
  47         "Logitec PCI card with external ROM",
  48         "Melco CardBus/PCI card with external ROM",
  49 };
  50
  51
  52 /*
  53  * SCSI Generic Definitions
  54  */
  55 #define EXTENDED_SDTR_LEN       0x03
  56
  57 /* Little Endian */
  58 typedef u32 u32_le;
  59 typedef u16 u16_le;
  60
  61 /*
  62  * BASIC Definitions
  63  */
  64 #ifndef TRUE
  65 # define TRUE  1
  66 #endif
  67 #ifndef FALSE
  68 # define FALSE 0
  69 #endif
  70 #define ASSERT 1
  71 #define NEGATE 0
  72
  73
  74 /*******************/
  75 /* normal register */
  76 /*******************/
  77 /*
  78  * Don't access below register with Double Word:
  79  * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0.
  80  */
  81 #define IRQ_CONTROL 0x00        /* BASE+00, W, W */
  82 #define IRQ_STATUS  0x00        /* BASE+00, W, R */
  83 # define IRQSTATUS_LATCHED_MSG      BIT(0)
  84 # define IRQSTATUS_LATCHED_IO       BIT(1)
  85 # define IRQSTATUS_LATCHED_CD       BIT(2)
  86 # define IRQSTATUS_LATCHED_BUS_FREE BIT(3)
  87 # define IRQSTATUS_RESELECT_OCCUER  BIT(4)
  88 # define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5)
  89 # define IRQSTATUS_SCSIRESET_IRQ    BIT(6)
  90 # define IRQSTATUS_TIMER_IRQ        BIT(7)
  91 # define IRQSTATUS_FIFO_SHLD_IRQ    BIT(8)
  92 # define IRQSTATUS_PCI_IRQ          BIT(9)
  93 # define IRQSTATUS_BMCNTERR_IRQ     BIT(10)
  94 # define IRQSTATUS_AUTOSCSI_IRQ     BIT(11)
  95 # define PCI_IRQ_MASK               BIT(12)
  96 # define TIMER_IRQ_MASK             BIT(13)
  97 # define FIFO_IRQ_MASK              BIT(14)
  98 # define SCSI_IRQ_MASK              BIT(15)
  99 # define IRQ_CONTROL_ALL_IRQ_MASK   (PCI_IRQ_MASK   | \
 100                                      TIMER_IRQ_MASK | \
 101                                      FIFO_IRQ_MASK  | \
 102                                      SCSI_IRQ_MASK  )
 103 # define IRQSTATUS_ANY_IRQ          (IRQSTATUS_RESELECT_OCCUER  | \
 104                                      IRQSTATUS_PHASE_CHANGE_IRQ | \
 105                                      IRQSTATUS_SCSIRESET_IRQ    | \
 106                                      IRQSTATUS_TIMER_IRQ        | \
 107                                      IRQSTATUS_FIFO_SHLD_IRQ    | \
 108                                      IRQSTATUS_PCI_IRQ          | \
 109                                      IRQSTATUS_BMCNTERR_IRQ     | \
 110                                      IRQSTATUS_AUTOSCSI_IRQ     )
 111
 112 #define TRANSFER_CONTROL        0x02    /* BASE+02, W, W */
 113 #define TRANSFER_STATUS         0x02    /* BASE+02, W, R */
 114 # define CB_MMIO_MODE        BIT(0)
 115 # define CB_IO_MODE          BIT(1)
 116 # define BM_TEST             BIT(2)
 117 # define BM_TEST_DIR         BIT(3)
 118 # define DUAL_EDGE_ENABLE    BIT(4)
 119 # define NO_TRANSFER_TO_HOST BIT(5)
 120 # define TRANSFER_GO         BIT(7)
 121 # define BLIEND_MODE         BIT(8)
 122 # define BM_START            BIT(9)
 123 # define ADVANCED_BM_WRITE   BIT(10)
 124 # define BM_SINGLE_MODE      BIT(11)
 125 # define FIFO_TRUE_FULL      BIT(12)
 126 # define FIFO_TRUE_EMPTY     BIT(13)
 127 # define ALL_COUNTER_CLR     BIT(14)
 128 # define FIFOTEST            BIT(15)
 129
 130 #define INDEX_REG               0x04    /* BASE+04, Byte(R/W), Word(R) */
 131
 132 #define TIMER_SET               0x06    /* BASE+06, W, R/W */
 133 # define TIMER_CNT_MASK (0xff)
 134 # define TIMER_STOP     BIT(8)
 135
 136 #define DATA_REG_LOW            0x08    /* BASE+08, LowW, R/W */
 137 #define DATA_REG_HI             0x0a    /* BASE+0a, Hi-W, R/W */
 138
 139 #define FIFO_REST_CNT           0x0c    /* BASE+0c, W, R/W */
 140 # define FIFO_REST_MASK       0x1ff
 141 # define FIFO_EMPTY_SHLD_FLAG BIT(14)
 142 # define FIFO_FULL_SHLD_FLAG  BIT(15)
 143
 144 #define SREQ_SMPL_RATE          0x0f    /* BASE+0f, B, R/W */
 145 # define SREQSMPLRATE_RATE0 BIT(0)
 146 # define SREQSMPLRATE_RATE1 BIT(1)
 147 # define SAMPLING_ENABLE    BIT(2)
 148 #  define SMPL_40M (0)                   /* 40MHz:   0-100ns/period */
 149 #  define SMPL_20M (SREQSMPLRATE_RATE0)  /* 20MHz: 100-200ns/period */
 150 #  define SMPL_10M (SREQSMPLRATE_RATE1)  /* 10Mhz: 200-   ns/period */
 151
 152 #define SCSI_BUS_CONTROL        0x10    /* BASE+10, B, R/W */
 153 # define BUSCTL_SEL         BIT(0)
 154 # define BUSCTL_RST         BIT(1)
 155 # define BUSCTL_DATAOUT_ENB BIT(2)
 156 # define BUSCTL_ATN         BIT(3)
 157 # define BUSCTL_ACK         BIT(4)
 158 # define BUSCTL_BSY         BIT(5)
 159 # define AUTODIRECTION      BIT(6)
 160 # define ACKENB             BIT(7)
 161
 162 #define CLR_COUNTER             0x12    /* BASE+12, B, W */
 163 # define ACK_COUNTER_CLR       BIT(0)
 164 # define SREQ_COUNTER_CLR      BIT(1)
 165 # define FIFO_HOST_POINTER_CLR BIT(2)
 166 # define FIFO_REST_COUNT_CLR   BIT(3)
 167 # define BM_COUNTER_CLR        BIT(4)
 168 # define SAVED_ACK_CLR         BIT(5)
 169 # define CLRCOUNTER_ALLMASK    (ACK_COUNTER_CLR       | \
 170                                 SREQ_COUNTER_CLR      | \
 171                                 FIFO_HOST_POINTER_CLR | \
 172                                 FIFO_REST_COUNT_CLR   | \
 173                                 BM_COUNTER_CLR        | \
 174                                 SAVED_ACK_CLR         )
 175
 176 #define SCSI_BUS_MONITOR        0x12    /* BASE+12, B, R */
 177 # define BUSMON_MSG BIT(0)
 178 # define BUSMON_IO  BIT(1)
 179 # define BUSMON_CD  BIT(2)
 180 # define BUSMON_BSY BIT(3)
 181 # define BUSMON_ACK BIT(4)
 182 # define BUSMON_REQ BIT(5)
 183 # define BUSMON_SEL BIT(6)
 184 # define BUSMON_ATN BIT(7)
 185
 186 #define COMMAND_DATA            0x14    /* BASE+14, B, R/W */
 187
 188 #define PARITY_CONTROL          0x16    /* BASE+16, B, W */
 189 # define PARITY_CHECK_ENABLE BIT(0)
 190 # define PARITY_ERROR_CLEAR  BIT(1)
 191 #define PARITY_STATUS           0x16    /* BASE+16, B, R */
 192 //# define PARITY_CHECK_ENABLE BIT(0)
 193 # define PARITY_ERROR_NORMAL BIT(1)
 194 # define PARITY_ERROR_LSB    BIT(1)
 195 # define PARITY_ERROR_MSB    BIT(2)
 196
 197 #define RESELECT_ID             0x18    /* BASE+18, B, R */
 198
 199 #define COMMAND_CONTROL         0x18    /* BASE+18, W, W */
 200 # define CLEAR_CDB_FIFO_POINTER BIT(0)
 201 # define AUTO_COMMAND_PHASE     BIT(1)
 202 # define AUTOSCSI_START         BIT(2)
 203 # define AUTOSCSI_RESTART       BIT(3)
 204 # define AUTO_PARAMETER         BIT(4)
 205 # define AUTO_ATN               BIT(5)
 206 # define AUTO_MSGIN_00_OR_04    BIT(6)
 207 # define AUTO_MSGIN_02          BIT(7)
 208 # define AUTO_MSGIN_03          BIT(8)
 209
 210 #define SET_ARBIT               0x1a    /* BASE+1a, B, W */
 211 # define ARBIT_GO    BIT(0)
 212 # define ARBIT_CLEAR BIT(1)
 213
 214 #define ARBIT_STATUS            0x1a    /* BASE+1a, B, R */
 215 //# define ARBIT_GO             BIT(0)
 216 # define ARBIT_WIN            BIT(1)
 217 # define ARBIT_FAIL           BIT(2)
 218 # define AUTO_PARAMETER_VALID BIT(3)
 219 # define SGT_VALID            BIT(4)
 220
 221 #define SYNC_REG                0x1c    /* BASE+1c, B, R/W */
 222
 223 #define ACK_WIDTH               0x1d    /* BASE+1d, B, R/W */
 224
 225 #define SCSI_DATA_WITH_ACK      0x20    /* BASE+20, B, R/W */
 226 #define SCSI_OUT_LATCH_TARGET_ID 0x22   /* BASE+22, B, W */
 227 #define SCSI_DATA_IN            0x22    /* BASE+22, B, R */
 228
 229 #define SCAM_CONTROL            0x24    /* BASE+24, B, W */
 230 #define SCAM_STATUS             0x24    /* BASE+24, B, R */
 231 # define SCAM_MSG    BIT(0)
 232 # define SCAM_IO     BIT(1)
 233 # define SCAM_CD     BIT(2)
 234 # define SCAM_BSY    BIT(3)
 235 # define SCAM_SEL    BIT(4)
 236 # define SCAM_XFEROK BIT(5)
 237
 238 #define SCAM_DATA               0x26    /* BASE+26, B, R/W */
 239 # define SD0    BIT(0)
 240 # define SD1    BIT(1)
 241 # define SD2    BIT(2)
 242 # define SD3    BIT(3)
 243 # define SD4    BIT(4)
 244 # define SD5    BIT(5)
 245 # define SD6    BIT(6)
 246 # define SD7    BIT(7)
 247
 248 #define SACK_CNT                0x28    /* BASE+28, DW, R/W */
 249 #define SREQ_CNT                0x2c    /* BASE+2c, DW, R/W */
 250
 251 #define FIFO_DATA_LOW           0x30    /* BASE+30, B/W/DW, R/W */
 252 #define FIFO_DATA_HIGH          0x32    /* BASE+32, B/W, R/W */
 253 #define BM_START_ADR            0x34    /* BASE+34, DW, R/W */
 254
 255 #define BM_CNT                  0x38    /* BASE+38, DW, R/W */
 256 # define BM_COUNT_MASK 0x0001ffffUL
 257 # define SGTEND        BIT(31)      /* Last SGT marker */
 258
 259 #define SGT_ADR                 0x3c    /* BASE+3c, DW, R/W */
 260 #define WAIT_REG                0x40    /* Bi only */
 261
 262 #define SCSI_EXECUTE_PHASE      0x40    /* BASE+40, W, R */
 263 # define COMMAND_PHASE     BIT(0)
 264 # define DATA_IN_PHASE     BIT(1)
 265 # define DATA_OUT_PHASE    BIT(2)
 266 # define MSGOUT_PHASE      BIT(3)
 267 # define STATUS_PHASE      BIT(4)
 268 # define ILLEGAL_PHASE     BIT(5)
 269 # define BUS_FREE_OCCUER   BIT(6)
 270 # define MSG_IN_OCCUER     BIT(7)
 271 # define MSG_OUT_OCCUER    BIT(8)
 272 # define SELECTION_TIMEOUT BIT(9)
 273 # define MSGIN_00_VALID    BIT(10)
 274 # define MSGIN_02_VALID    BIT(11)
 275 # define MSGIN_03_VALID    BIT(12)
 276 # define MSGIN_04_VALID    BIT(13)
 277 # define AUTOSCSI_BUSY     BIT(15)
 278
 279 #define SCSI_CSB_IN             0x42    /* BASE+42, B, R */
 280
 281 #define SCSI_MSG_OUT            0x44    /* BASE+44, DW, R/W */
 282 # define MSGOUT_COUNT_MASK (BIT(0)|BIT(1))
 283 # define MV_VALID           BIT(7)
 284
 285 #define SEL_TIME_OUT            0x48    /* BASE+48, W, R/W */
 286 #define SAVED_SACK_CNT          0x4c    /* BASE+4c, DW, R */
 287
 288 #define HTOSDATADELAY           0x50    /* BASE+50, B, R/W */
 289 #define STOHDATADELAY           0x54    /* BASE+54, B, R/W */
 290 #define ACKSUMCHECKRD           0x58    /* BASE+58, W, R */
 291 #define REQSUMCHECKRD           0x5c    /* BASE+5c, W, R */
 292
 293
 294 /********************/
 295 /* indexed register */
 296 /********************/
 297
 298 #define CLOCK_DIV               0x00    /* BASE+08, IDX+00, B, R/W */
 299 # define CLOCK_2  BIT(0)        /* MCLK/2 */
 300 # define CLOCK_4  BIT(1)        /* MCLK/4 */
 301 # define PCICLK   BIT(7)        /* PCICLK (33MHz) */
 302
 303 #define TERM_PWR_CONTROL        0x01    /* BASE+08, IDX+01, B, R/W */
 304 # define BPWR  BIT(0)
 305 # define SENSE BIT(1)   /* Read Only */
 306
 307 #define EXT_PORT_DDR            0x02    /* BASE+08, IDX+02, B, R/W */
 308 #define EXT_PORT                0x03    /* BASE+08, IDX+03, B, R/W */
 309 # define LED_ON  (0)
 310 # define LED_OFF BIT(0)
 311
 312 #define IRQ_SELECT              0x04    /* BASE+08, IDX+04, W, R/W */
 313 # define IRQSELECT_RESELECT_IRQ      BIT(0)
 314 # define IRQSELECT_PHASE_CHANGE_IRQ  BIT(1)
 315 # define IRQSELECT_SCSIRESET_IRQ     BIT(2)
 316 # define IRQSELECT_TIMER_IRQ         BIT(3)
 317 # define IRQSELECT_FIFO_SHLD_IRQ     BIT(4)
 318 # define IRQSELECT_TARGET_ABORT_IRQ  BIT(5)
 319 # define IRQSELECT_MASTER_ABORT_IRQ  BIT(6)
 320 # define IRQSELECT_SERR_IRQ          BIT(7)
 321 # define IRQSELECT_PERR_IRQ          BIT(8)
 322 # define IRQSELECT_BMCNTERR_IRQ      BIT(9)
 323 # define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10)
 324
 325 #define OLD_SCSI_PHASE          0x05    /* BASE+08, IDX+05, B, R */
 326 # define OLD_MSG  BIT(0)
 327 # define OLD_IO   BIT(1)
 328 # define OLD_CD   BIT(2)
 329 # define OLD_BUSY BIT(3)
 330
 331 #define FIFO_FULL_SHLD_COUNT    0x06    /* BASE+08, IDX+06, B, R/W */
 332 #define FIFO_EMPTY_SHLD_COUNT   0x07    /* BASE+08, IDX+07, B, R/W */
 333
 334 #define EXP_ROM_CONTROL         0x08    /* BASE+08, IDX+08, B, R/W */ /* external ROM control */
 335 # define ROM_WRITE_ENB BIT(0)
 336 # define IO_ACCESS_ENB BIT(1)
 337 # define ROM_ADR_CLEAR BIT(2)
 338
 339 #define EXP_ROM_ADR             0x09    /* BASE+08, IDX+09, W, R/W */
 340
 341 #define EXP_ROM_DATA            0x0a    /* BASE+08, IDX+0a, B, R/W */
 342
 343 #define CHIP_MODE               0x0b    /* BASE+08, IDX+0b, B, R   */ /* NinjaSCSI-32Bi only */
 344 # define OEM0 BIT(1)  /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */
 345 # define OEM1 BIT(2)  /* OEM select */
 346 # define OPTB BIT(3)  /* KME mode select */
 347 # define OPTC BIT(4)  /* KME mode select */
 348 # define OPTD BIT(5)  /* KME mode select */
 349 # define OPTE BIT(6)  /* KME mode select */
 350 # define OPTF BIT(7)  /* Power management */
 351
 352 #define MISC_WR                 0x0c    /* BASE+08, IDX+0c, W, R/W */
 353 #define MISC_RD                 0x0c
 354 # define SCSI_DIRECTION_DETECTOR_SELECT BIT(0)
 355 # define SCSI2_HOST_DIRECTION_VALID     BIT(1)  /* Read only */
 356 # define HOST2_SCSI_DIRECTION_VALID     BIT(2)  /* Read only */
 357 # define DELAYED_BMSTART                BIT(3)
 358 # define MASTER_TERMINATION_SELECT      BIT(4)
 359 # define BMREQ_NEGATE_TIMING_SEL        BIT(5)
 360 # define AUTOSEL_TIMING_SEL             BIT(6)
 361 # define MISC_MABORT_MASK               BIT(7)
 362 # define BMSTOP_CHANGE2_NONDATA_PHASE   BIT(8)
 363
 364 #define BM_CYCLE                0x0d    /* BASE+08, IDX+0d, B, R/W */
 365 # define BM_CYCLE0               BIT(0)
 366 # define BM_CYCLE1               BIT(1)
 367 # define BM_FRAME_ASSERT_TIMING  BIT(2)
 368 # define BM_IRDY_ASSERT_TIMING   BIT(3)
 369 # define BM_SINGLE_BUS_MASTER    BIT(4)
 370 # define MEMRD_CMD0              BIT(5)
 371 # define SGT_AUTO_PARA_MEMED_CMD BIT(6)
 372 # define MEMRD_CMD1              BIT(7)
 373
 374
 375 #define SREQ_EDGH               0x0e    /* BASE+08, IDX+0e, B, W */
 376 # define SREQ_EDGH_SELECT BIT(0)
 377
 378 #define UP_CNT                  0x0f    /* BASE+08, IDX+0f, B, W */
 379 # define REQCNT_UP  BIT(0)
 380 # define ACKCNT_UP  BIT(1)
 381 # define BMADR_UP   BIT(4)
 382 # define BMCNT_UP   BIT(5)
 383 # define SGT_CNT_UP BIT(7)
 384
 385 #define CFG_CMD_STR             0x10    /* BASE+08, IDX+10, W, R */
 386 #define CFG_LATE_CACHE          0x11    /* BASE+08, IDX+11, W, R/W */
 387 #define CFG_BASE_ADR_1          0x12    /* BASE+08, IDX+12, W, R */
 388 #define CFG_BASE_ADR_2          0x13    /* BASE+08, IDX+13, W, R */
 389 #define CFG_INLINE              0x14    /* BASE+08, IDX+14, W, R */
 390
 391 #define SERIAL_ROM_CTL          0x15    /* BASE+08, IDX+15, B, R */
 392 # define SCL BIT(0)
 393 # define ENA BIT(1)
 394 # define SDA BIT(2)
 395
 396 #define FIFO_HST_POINTER        0x16    /* BASE+08, IDX+16, B, R/W */
 397 #define SREQ_DELAY              0x17    /* BASE+08, IDX+17, B, R/W */
 398 #define SACK_DELAY              0x18    /* BASE+08, IDX+18, B, R/W */
 399 #define SREQ_NOISE_CANCEL       0x19    /* BASE+08, IDX+19, B, R/W */
 400 #define SDP_NOISE_CANCEL        0x1a    /* BASE+08, IDX+1a, B, R/W */
 401 #define DELAY_TEST              0x1b    /* BASE+08, IDX+1b, B, R/W */
 402 #define SD0_NOISE_CANCEL        0x20    /* BASE+08, IDX+20, B, R/W */
 403 #define SD1_NOISE_CANCEL        0x21    /* BASE+08, IDX+21, B, R/W */
 404 #define SD2_NOISE_CANCEL        0x22    /* BASE+08, IDX+22, B, R/W */
 405 #define SD3_NOISE_CANCEL        0x23    /* BASE+08, IDX+23, B, R/W */
 406 #define SD4_NOISE_CANCEL        0x24    /* BASE+08, IDX+24, B, R/W */
 407 #define SD5_NOISE_CANCEL        0x25    /* BASE+08, IDX+25, B, R/W */
 408 #define SD6_NOISE_CANCEL        0x26    /* BASE+08, IDX+26, B, R/W */
 409 #define SD7_NOISE_CANCEL        0x27    /* BASE+08, IDX+27, B, R/W */
 410
 411
 412 /*
 413  * Useful Bus Monitor status combinations.
 414  */
 415 #define BUSMON_BUS_FREE    0
 416 #define BUSMON_COMMAND     ( BUSMON_BSY |                          BUSMON_CD | BUSMON_REQ )
 417 #define BUSMON_MESSAGE_IN  ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ )
 418 #define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG |             BUSMON_CD | BUSMON_REQ )
 419 #define BUSMON_DATA_IN     ( BUSMON_BSY |              BUSMON_IO |             BUSMON_REQ )
 420 #define BUSMON_DATA_OUT    ( BUSMON_BSY |                                      BUSMON_REQ )
 421 #define BUSMON_STATUS      ( BUSMON_BSY |              BUSMON_IO | BUSMON_CD | BUSMON_REQ )
 422 #define BUSMON_RESELECT    (                           BUSMON_IO                          | BUSMON_SEL)
 423 #define BUSMON_PHASE_MASK  (              BUSMON_MSG | BUSMON_IO | BUSMON_CD              | BUSMON_SEL)
 424
 425 #define BUSPHASE_COMMAND     ( BUSMON_COMMAND     & BUSMON_PHASE_MASK )
 426 #define BUSPHASE_MESSAGE_IN  ( BUSMON_MESSAGE_IN  & BUSMON_PHASE_MASK )
 427 #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK )
 428 #define BUSPHASE_DATA_IN     ( BUSMON_DATA_IN     & BUSMON_PHASE_MASK )
 429 #define BUSPHASE_DATA_OUT    ( BUSMON_DATA_OUT    & BUSMON_PHASE_MASK )
 430 #define BUSPHASE_STATUS      ( BUSMON_STATUS      & BUSMON_PHASE_MASK )
 431 #define BUSPHASE_SELECT      ( BUSMON_SEL | BUSMON_IO )
 432
 433
 434 /************************************************************************
 435  * structure for DMA/Scatter Gather list
 436  */
 437 #define NSP32_SG_SIZE           SG_ALL
 438
 439 typedef struct _nsp32_sgtable {
 440         /* values must be little endian */
 441         u32_le addr; /* transfer address */
 442         u32_le len;  /* transfer length. BIT(31) is for SGT_END mark */
 443 } __attribute__ ((packed)) nsp32_sgtable;
 444
 445 typedef struct _nsp32_sglun {
 446         nsp32_sgtable sgt[NSP32_SG_SIZE+1];     /* SG table */
 447 } __attribute__ ((packed)) nsp32_sglun;
 448 #define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN)
 449
 450 /* Auto parameter mode memory map.   */
 451 /* All values must be little endian. */
 452 typedef struct _nsp32_autoparam {
 453         u8     cdb[4 * 0x10];    /* SCSI Command                      */
 454         u32_le msgout;           /* outgoing messages                 */
 455         u8     syncreg;          /* sync register value               */
 456         u8     ackwidth;         /* ack width register value          */
 457         u8     target_id;        /* target/host device id             */
 458         u8     sample_reg;       /* hazard killer sampling rate       */
 459         u16_le command_control;  /* command control register          */
 460         u16_le transfer_control; /* transfer control register         */
 461         u32_le sgt_pointer;      /* SG table physical address for DMA */
 462         u32_le dummy[2];
 463 } __attribute__ ((packed)) nsp32_autoparam;  /* must be packed struct */
 464
 465 /*
 466  * host data structure
 467  */
 468 /* message in/out buffer */
 469 #define MSGOUTBUF_MAX           20
 470 #define MSGINBUF_MAX            20
 471
 472 /* flag for trans_method */
 473 #define NSP32_TRANSFER_BUSMASTER        BIT(0)
 474 #define NSP32_TRANSFER_MMIO             BIT(1)  /* Not supported yet */
 475 #define NSP32_TRANSFER_PIO              BIT(2)  /* Not supported yet */
 476
 477
 478 /*
 479  * structure for connected LUN dynamic data
 480  *
 481  * Note: Currently tagged queuing is disabled, each nsp32_lunt holds
 482  *       one SCSI command and one state.
 483  */
 484 #define DISCPRIV_OK             BIT(0)          /* DISCPRIV Enable mode */
 485 #define MSGIN03                 BIT(1)          /* Auto Msg In 03 Flag  */
 486
 487 typedef struct _nsp32_lunt {
 488         struct scsi_cmnd        *SCpnt;     /* Current Handling struct scsi_cmnd */
 489         unsigned long    save_datp;  /* Save Data Pointer - saved position from initial address */
 490         int              msgin03;       /* auto msg in 03 flag     */
 491         unsigned int     sg_num;        /* Total number of SG entries */
 492         int              cur_entry;     /* Current SG entry number */
 493         nsp32_sglun     *sglun;         /* sg table per lun        */
 494         dma_addr_t       sglun_paddr;   /* sglun physical address  */
 495 } nsp32_lunt;
 496
 497
 498 /*
 499  * SCSI TARGET/LUN definition
 500  */
 501 #define NSP32_HOST_SCSIID    7  /* SCSI initiator is every time defined as 7 */
 502 #define MAX_TARGET           8
 503 #define MAX_LUN              8  /* XXX: In SPI3, max number of LUN is 64. */
 504
 505
 506 typedef struct _nsp32_sync_table {
 507         unsigned char   period_num;     /* period number                  */
 508         unsigned char   ackwidth;       /* ack width designated by period */
 509         unsigned char   start_period;   /* search range - start period    */
 510         unsigned char   end_period;     /* search range - end period      */
 511         unsigned char   sample_rate;    /* hazard killer parameter        */
 512 } nsp32_sync_table;
 513
 514
 515 /*
 516  * structure for target device static data
 517  */
 518 /* flag for nsp32_target.sync_flag */
 519 #define SDTR_INITIATOR    BIT(0)    /* sending SDTR from initiator        */
 520 #define SDTR_TARGET       BIT(1)    /* sending SDTR from target           */
 521 #define SDTR_DONE         BIT(2)    /* exchanging SDTR has been processed */
 522
 523 /* syncronous period value for nsp32_target.config_max */
 524 #define FAST5M                  0x32
 525 #define FAST10M                 0x19
 526 #define ULTRA20M                0x0c
 527
 528 /* flag for nsp32_target.{sync_offset}, period */
 529 #define ASYNC_OFFSET            0       /* asynchronous transfer           */
 530 #define SYNC_OFFSET             0xf     /* synchronous transfer max offset */
 531
 532 /* syncreg:
 533   bit:07 06 05 04 03 02 01 00
 534       ---PERIOD-- ---OFFSET--   */
 535 #define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f))
 536
 537 typedef struct _nsp32_target {
 538         unsigned char   syncreg;        /* value for SYNCREG   */
 539         unsigned char   ackwidth;       /* value for ACKWIDTH  */
 540         unsigned char   period;         /* sync period (0-255) */
 541         unsigned char   offset;         /* sync offset (0-15)  */
 542         int             sync_flag;      /* SDTR_*, 0           */
 543         int             limit_entry;    /* max speed limit entry designated
 544                                            by EEPROM configuration */
 545         unsigned char   sample_reg;     /* SREQ hazard killer register */
 546 } nsp32_target;
 547
 548 typedef struct _nsp32_hw_data {
 549         int           IrqNumber;
 550         int           BaseAddress;
 551         int           NumAddress;
 552         void __iomem *MmioAddress;
 553 #define NSP32_MMIO_OFFSET 0x0800
 554         unsigned long MmioLength;
 555
 556         struct scsi_cmnd *CurrentSC;
 557
 558         struct pci_dev             *Pci;
 559         const struct pci_device_id *pci_devid;
 560         struct Scsi_Host           *Host;
 561         spinlock_t                  Lock;
 562
 563         char info_str[100];
 564
 565         /* allocated memory region */
 566         nsp32_sglun      *sg_list;      /* sglist virtuxal address         */
 567         dma_addr_t        sg_paddr;     /* physical address of hw_sg_table */
 568         nsp32_autoparam  *autoparam;    /* auto parameter transfer region  */
 569         dma_addr_t        auto_paddr;   /* physical address of autoparam   */
 570         int               cur_entry;    /* current sgt entry               */
 571
 572         /* target/LUN */
 573         nsp32_lunt       *cur_lunt;     /* Current connected LUN table */
 574         nsp32_lunt        lunt[MAX_TARGET][MAX_LUN];  /* All LUN table */
 575
 576         nsp32_target     *cur_target;   /* Current connected SCSI ID    */
 577         nsp32_target      target[MAX_TARGET];        /* SCSI ID */
 578         int               cur_id;       /* Current connected target ID  */
 579         int               cur_lun;      /* Current connected target LUN */
 580
 581         /* behavior setting parameters */
 582         int               trans_method; /* transfer method flag            */
 583         int               resettime;    /* Reset time                      */
 584         int               clock;        /* clock dividing flag             */
 585         nsp32_sync_table *synct;        /* sync_table determined by clock  */
 586         int               syncnum;      /* the max number of synct element */
 587
 588         /* message buffer */
 589         unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer    */
 590         char          msgout_len;               /* msgoutbuf length */
 591         unsigned char msginbuf [MSGINBUF_MAX];  /* megin buffer     */
 592         char          msgin_len;                /* msginbuf length  */
 593
 594 } nsp32_hw_data;
 595
 596 /*
 597  * TIME definition
 598  */
 599 #define RESET_HOLD_TIME         10000   /* reset time in us (SCSI-2 says the
 600                                            minimum is 25us) */
 601 #define SEL_TIMEOUT_TIME        10000   /* 250ms defined in SCSI specification
 602                                            (25.6us/1unit) */
 603 #define ARBIT_TIMEOUT_TIME      100     /* 100us */
 604 #define REQSACK_TIMEOUT_TIME    10000   /* max wait time for REQ/SACK assertion
 605                                            or negation, 10000us == 10ms */
 606
 607 #endif /* _NSP32_H */
 608 /* end */