drivers/leds/leds-lp5562.c

   1 /*
   2  * LP5562 LED driver
   3  *
   4  * Copyright (C) 2013 Texas Instruments
   5  *
   6  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/firmware.h>
  15 #include <linux/i2c.h>
  16 #include <linux/leds.h>
  17 #include <linux/module.h>
  18 #include <linux/mutex.h>
  19 #include <linux/of.h>
  20 #include <linux/platform_data/leds-lp55xx.h>
  21 #include <linux/slab.h>
  22
  23 #include "leds-lp55xx-common.h"
  24
  25 #define LP5562_PROGRAM_LENGTH           32
  26 #define LP5562_MAX_LEDS                 4
  27
  28 /* ENABLE Register 00h */
  29 #define LP5562_REG_ENABLE               0x00
  30 #define LP5562_EXEC_ENG1_M              0x30
  31 #define LP5562_EXEC_ENG2_M              0x0C
  32 #define LP5562_EXEC_ENG3_M              0x03
  33 #define LP5562_EXEC_M                   0x3F
  34 #define LP5562_MASTER_ENABLE            0x40    /* Chip master enable */
  35 #define LP5562_LOGARITHMIC_PWM          0x80    /* Logarithmic PWM adjustment */
  36 #define LP5562_EXEC_RUN                 0x2A
  37 #define LP5562_ENABLE_DEFAULT   \
  38         (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
  39 #define LP5562_ENABLE_RUN_PROGRAM       \
  40         (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
  41
  42 /* OPMODE Register 01h */
  43 #define LP5562_REG_OP_MODE              0x01
  44 #define LP5562_MODE_ENG1_M              0x30
  45 #define LP5562_MODE_ENG2_M              0x0C
  46 #define LP5562_MODE_ENG3_M              0x03
  47 #define LP5562_LOAD_ENG1                0x10
  48 #define LP5562_LOAD_ENG2                0x04
  49 #define LP5562_LOAD_ENG3                0x01
  50 #define LP5562_RUN_ENG1                 0x20
  51 #define LP5562_RUN_ENG2                 0x08
  52 #define LP5562_RUN_ENG3                 0x02
  53 #define LP5562_ENG1_IS_LOADING(mode)    \
  54         ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
  55 #define LP5562_ENG2_IS_LOADING(mode)    \
  56         ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
  57 #define LP5562_ENG3_IS_LOADING(mode)    \
  58         ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
  59
  60 /* BRIGHTNESS Registers */
  61 #define LP5562_REG_R_PWM                0x04
  62 #define LP5562_REG_G_PWM                0x03
  63 #define LP5562_REG_B_PWM                0x02
  64 #define LP5562_REG_W_PWM                0x0E
  65
  66 /* CURRENT Registers */
  67 #define LP5562_REG_R_CURRENT            0x07
  68 #define LP5562_REG_G_CURRENT            0x06
  69 #define LP5562_REG_B_CURRENT            0x05
  70 #define LP5562_REG_W_CURRENT            0x0F
  71
  72 /* CONFIG Register 08h */
  73 #define LP5562_REG_CONFIG               0x08
  74 #define LP5562_PWM_HF                   0x40
  75 #define LP5562_PWRSAVE_EN               0x20
  76 #define LP5562_CLK_INT                  0x01    /* Internal clock */
  77 #define LP5562_DEFAULT_CFG              (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
  78
  79 /* RESET Register 0Dh */
  80 #define LP5562_REG_RESET                0x0D
  81 #define LP5562_RESET                    0xFF
  82
  83 /* PROGRAM ENGINE Registers */
  84 #define LP5562_REG_PROG_MEM_ENG1        0x10
  85 #define LP5562_REG_PROG_MEM_ENG2        0x30
  86 #define LP5562_REG_PROG_MEM_ENG3        0x50
  87
  88 /* LEDMAP Register 70h */
  89 #define LP5562_REG_ENG_SEL              0x70
  90 #define LP5562_ENG_SEL_PWM              0
  91 #define LP5562_ENG_FOR_RGB_M            0x3F
  92 #define LP5562_ENG_SEL_RGB              0x1B    /* R:ENG1, G:ENG2, B:ENG3 */
  93 #define LP5562_ENG_FOR_W_M              0xC0
  94 #define LP5562_ENG1_FOR_W               0x40    /* W:ENG1 */
  95 #define LP5562_ENG2_FOR_W               0x80    /* W:ENG2 */
  96 #define LP5562_ENG3_FOR_W               0xC0    /* W:ENG3 */
  97
  98 /* Program Commands */
  99 #define LP5562_CMD_DISABLE              0x00
 100 #define LP5562_CMD_LOAD                 0x15
 101 #define LP5562_CMD_RUN                  0x2A
 102 #define LP5562_CMD_DIRECT               0x3F
 103 #define LP5562_PATTERN_OFF              0
 104
 105 static inline void lp5562_wait_opmode_done(void)
 106 {
 107         /* operation mode change needs to be longer than 153 us */
 108         usleep_range(200, 300);
 109 }
 110
 111 static inline void lp5562_wait_enable_done(void)
 112 {
 113         /* it takes more 488 us to update ENABLE register */
 114         usleep_range(500, 600);
 115 }
 116
 117 static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
 118 {
 119         u8 addr[] = {
 120                 LP5562_REG_R_CURRENT,
 121                 LP5562_REG_G_CURRENT,
 122                 LP5562_REG_B_CURRENT,
 123                 LP5562_REG_W_CURRENT,
 124         };
 125
 126         led->led_current = led_current;
 127         lp55xx_write(led->chip, addr[led->chan_nr], led_current);
 128 }
 129
 130 static void lp5562_load_engine(struct lp55xx_chip *chip)
 131 {
 132         enum lp55xx_engine_index idx = chip->engine_idx;
 133         u8 mask[] = {
 134                 [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
 135                 [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
 136                 [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
 137         };
 138
 139         u8 val[] = {
 140                 [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
 141                 [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
 142                 [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
 143         };
 144
 145         lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
 146
 147         lp5562_wait_opmode_done();
 148 }
 149
 150 static void lp5562_stop_engine(struct lp55xx_chip *chip)
 151 {
 152         lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
 153         lp5562_wait_opmode_done();
 154 }
 155
 156 static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
 157 {
 158         int ret;
 159         u8 mode;
 160         u8 exec;
 161
 162         /* stop engine */
 163         if (!start) {
 164                 lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
 165                 lp5562_wait_enable_done();
 166                 lp5562_stop_engine(chip);
 167                 lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
 168                 lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
 169                 lp5562_wait_opmode_done();
 170                 return;
 171         }
 172
 173         /*
 174          * To run the engine,
 175          * operation mode and enable register should updated at the same time
 176          */
 177
 178         ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
 179         if (ret)
 180                 return;
 181
 182         ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
 183         if (ret)
 184                 return;
 185
 186         /* change operation mode to RUN only when each engine is loading */
 187         if (LP5562_ENG1_IS_LOADING(mode)) {
 188                 mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
 189                 exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
 190         }
 191
 192         if (LP5562_ENG2_IS_LOADING(mode)) {
 193                 mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
 194                 exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
 195         }
 196
 197         if (LP5562_ENG3_IS_LOADING(mode)) {
 198                 mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
 199                 exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
 200         }
 201
 202         lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
 203         lp5562_wait_opmode_done();
 204
 205         lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
 206         lp5562_wait_enable_done();
 207 }
 208
 209 static int lp5562_update_firmware(struct lp55xx_chip *chip,
 210                                         const u8 *data, size_t size)
 211 {
 212         enum lp55xx_engine_index idx = chip->engine_idx;
 213         u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
 214         u8 addr[] = {
 215                 [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
 216                 [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
 217                 [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
 218         };
 219         unsigned cmd;
 220         char c[3];
 221         int program_size;
 222         int nrchars;
 223         int offset = 0;
 224         int ret;
 225         int i;
 226
 227         /* clear program memory before updating */
 228         for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
 229                 lp55xx_write(chip, addr[idx] + i, 0);
 230
 231         i = 0;
 232         while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
 233                 /* separate sscanfs because length is working only for %s */
 234                 ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
 235                 if (ret != 1)
 236                         goto err;
 237
 238                 ret = sscanf(c, "%2x", &cmd);
 239                 if (ret != 1)
 240                         goto err;
 241
 242                 pattern[i] = (u8)cmd;
 243                 offset += nrchars;
 244                 i++;
 245         }
 246
 247         /* Each instruction is 16bit long. Check that length is even */
 248         if (i % 2)
 249                 goto err;
 250
 251         program_size = i;
 252         for (i = 0; i < program_size; i++)
 253                 lp55xx_write(chip, addr[idx] + i, pattern[i]);
 254
 255         return 0;
 256
 257 err:
 258         dev_err(&chip->cl->dev, "wrong pattern format\n");
 259         return -EINVAL;
 260 }
 261
 262 static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
 263 {
 264         const struct firmware *fw = chip->fw;
 265
 266         if (fw->size > LP5562_PROGRAM_LENGTH) {
 267                 dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
 268                         fw->size);
 269                 return;
 270         }
 271
 272         /*
 273          * Program momery sequence
 274          *  1) set engine mode to "LOAD"
 275          *  2) write firmware data into program memory
 276          */
 277
 278         lp5562_load_engine(chip);
 279         lp5562_update_firmware(chip, fw->data, fw->size);
 280 }
 281
 282 static int lp5562_post_init_device(struct lp55xx_chip *chip)
 283 {
 284         int ret;
 285         u8 cfg = LP5562_DEFAULT_CFG;
 286
 287         /* Set all PWMs to direct control mode */
 288         ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
 289         if (ret)
 290                 return ret;
 291
 292         lp5562_wait_opmode_done();
 293
 294         /* Update configuration for the clock setting */
 295         if (!lp55xx_is_extclk_used(chip))
 296                 cfg |= LP5562_CLK_INT;
 297
 298         ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
 299         if (ret)
 300                 return ret;
 301
 302         /* Initialize all channels PWM to zero -> leds off */
 303         lp55xx_write(chip, LP5562_REG_R_PWM, 0);
 304         lp55xx_write(chip, LP5562_REG_G_PWM, 0);
 305         lp55xx_write(chip, LP5562_REG_B_PWM, 0);
 306         lp55xx_write(chip, LP5562_REG_W_PWM, 0);
 307
 308         /* Set LED map as register PWM by default */
 309         lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
 310
 311         return 0;
 312 }
 313
 314 static void lp5562_led_brightness_work(struct work_struct *work)
 315 {
 316         struct lp55xx_led *led = container_of(work, struct lp55xx_led,
 317                                               brightness_work);
 318         struct lp55xx_chip *chip = led->chip;
 319         u8 addr[] = {
 320                 LP5562_REG_R_PWM,
 321                 LP5562_REG_G_PWM,
 322                 LP5562_REG_B_PWM,
 323                 LP5562_REG_W_PWM,
 324         };
 325
 326         mutex_lock(&chip->lock);
 327         lp55xx_write(chip, addr[led->chan_nr], led->brightness);
 328         mutex_unlock(&chip->lock);
 329 }
 330
 331 static void lp5562_write_program_memory(struct lp55xx_chip *chip,
 332                                         u8 base, const u8 *rgb, int size)
 333 {
 334         int i;
 335
 336         if (!rgb || size <= 0)
 337                 return;
 338
 339         for (i = 0; i < size; i++)
 340                 lp55xx_write(chip, base + i, *(rgb + i));
 341
 342         lp55xx_write(chip, base + i, 0);
 343         lp55xx_write(chip, base + i + 1, 0);
 344 }
 345
 346 /* check the size of program count */
 347 static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
 348 {
 349         return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
 350                ptn->size_g >= LP5562_PROGRAM_LENGTH ||
 351                ptn->size_b >= LP5562_PROGRAM_LENGTH;
 352 }
 353
 354 static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
 355 {
 356         struct lp55xx_predef_pattern *ptn;
 357         int i;
 358
 359         if (mode == LP5562_PATTERN_OFF) {
 360                 lp5562_run_engine(chip, false);
 361                 return 0;
 362         }
 363
 364         ptn = chip->pdata->patterns + (mode - 1);
 365         if (!ptn || _is_pc_overflow(ptn)) {
 366                 dev_err(&chip->cl->dev, "invalid pattern data\n");
 367                 return -EINVAL;
 368         }
 369
 370         lp5562_stop_engine(chip);
 371
 372         /* Set LED map as RGB */
 373         lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
 374
 375         /* Load engines */
 376         for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
 377                 chip->engine_idx = i;
 378                 lp5562_load_engine(chip);
 379         }
 380
 381         /* Clear program registers */
 382         lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
 383         lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
 384         lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
 385         lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
 386         lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
 387         lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
 388
 389         /* Program engines */
 390         lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
 391                                 ptn->r, ptn->size_r);
 392         lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
 393                                 ptn->g, ptn->size_g);
 394         lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
 395                                 ptn->b, ptn->size_b);
 396
 397         /* Run engines */
 398         lp5562_run_engine(chip, true);
 399
 400         return 0;
 401 }
 402
 403 static ssize_t lp5562_store_pattern(struct device *dev,
 404                                 struct device_attribute *attr,
 405                                 const char *buf, size_t len)
 406 {
 407         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 408         struct lp55xx_chip *chip = led->chip;
 409         struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
 410         int num_patterns = chip->pdata->num_patterns;
 411         unsigned long mode;
 412         int ret;
 413
 414         ret = kstrtoul(buf, 0, &mode);
 415         if (ret)
 416                 return ret;
 417
 418         if (mode > num_patterns || !ptn)
 419                 return -EINVAL;
 420
 421         mutex_lock(&chip->lock);
 422         ret = lp5562_run_predef_led_pattern(chip, mode);
 423         mutex_unlock(&chip->lock);
 424
 425         if (ret)
 426                 return ret;
 427
 428         return len;
 429 }
 430
 431 static ssize_t lp5562_store_engine_mux(struct device *dev,
 432                                      struct device_attribute *attr,
 433                                      const char *buf, size_t len)
 434 {
 435         struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 436         struct lp55xx_chip *chip = led->chip;
 437         u8 mask;
 438         u8 val;
 439
 440         /* LED map
 441          * R ... Engine 1 (fixed)
 442          * G ... Engine 2 (fixed)
 443          * B ... Engine 3 (fixed)
 444          * W ... Engine 1 or 2 or 3
 445          */
 446
 447         if (sysfs_streq(buf, "RGB")) {
 448                 mask = LP5562_ENG_FOR_RGB_M;
 449                 val = LP5562_ENG_SEL_RGB;
 450         } else if (sysfs_streq(buf, "W")) {
 451                 enum lp55xx_engine_index idx = chip->engine_idx;
 452
 453                 mask = LP5562_ENG_FOR_W_M;
 454                 switch (idx) {
 455                 case LP55XX_ENGINE_1:
 456                         val = LP5562_ENG1_FOR_W;
 457                         break;
 458                 case LP55XX_ENGINE_2:
 459                         val = LP5562_ENG2_FOR_W;
 460                         break;
 461                 case LP55XX_ENGINE_3:
 462                         val = LP5562_ENG3_FOR_W;
 463                         break;
 464                 default:
 465                         return -EINVAL;
 466                 }
 467
 468         } else {
 469                 dev_err(dev, "choose RGB or W\n");
 470                 return -EINVAL;
 471         }
 472
 473         mutex_lock(&chip->lock);
 474         lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
 475         mutex_unlock(&chip->lock);
 476
 477         return len;
 478 }
 479
 480 static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
 481 static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
 482
 483 static struct attribute *lp5562_attributes[] = {
 484         &dev_attr_led_pattern.attr,
 485         &dev_attr_engine_mux.attr,
 486         NULL,
 487 };
 488
 489 static const struct attribute_group lp5562_group = {
 490         .attrs = lp5562_attributes,
 491 };
 492
 493 /* Chip specific configurations */
 494 static struct lp55xx_device_config lp5562_cfg = {
 495         .max_channel  = LP5562_MAX_LEDS,
 496         .reset = {
 497                 .addr = LP5562_REG_RESET,
 498                 .val  = LP5562_RESET,
 499         },
 500         .enable = {
 501                 .addr = LP5562_REG_ENABLE,
 502                 .val  = LP5562_ENABLE_DEFAULT,
 503         },
 504         .post_init_device   = lp5562_post_init_device,
 505         .set_led_current    = lp5562_set_led_current,
 506         .brightness_work_fn = lp5562_led_brightness_work,
 507         .run_engine         = lp5562_run_engine,
 508         .firmware_cb        = lp5562_firmware_loaded,
 509         .dev_attr_group     = &lp5562_group,
 510 };
 511
 512 static int lp5562_probe(struct i2c_client *client,
 513                         const struct i2c_device_id *id)
 514 {
 515         int ret;
 516         struct lp55xx_chip *chip;
 517         struct lp55xx_led *led;
 518         struct lp55xx_platform_data *pdata;
 519         struct device_node *np = client->dev.of_node;
 520
 521         if (!dev_get_platdata(&client->dev)) {
 522                 if (np) {
 523                         ret = lp55xx_of_populate_pdata(&client->dev, np);
 524                         if (ret < 0)
 525                                 return ret;
 526                 } else {
 527                         dev_err(&client->dev, "no platform data\n");
 528                         return -EINVAL;
 529                 }
 530         }
 531         pdata = dev_get_platdata(&client->dev);
 532
 533         chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 534         if (!chip)
 535                 return -ENOMEM;
 536
 537         led = devm_kzalloc(&client->dev,
 538                         sizeof(*led) * pdata->num_channels, GFP_KERNEL);
 539         if (!led)
 540                 return -ENOMEM;
 541
 542         chip->cl = client;
 543         chip->pdata = pdata;
 544         chip->cfg = &lp5562_cfg;
 545
 546         mutex_init(&chip->lock);
 547
 548         i2c_set_clientdata(client, led);
 549
 550         ret = lp55xx_init_device(chip);
 551         if (ret)
 552                 goto err_init;
 553
 554         ret = lp55xx_register_leds(led, chip);
 555         if (ret)
 556                 goto err_register_leds;
 557
 558         ret = lp55xx_register_sysfs(chip);
 559         if (ret) {
 560                 dev_err(&client->dev, "registering sysfs failed\n");
 561                 goto err_register_sysfs;
 562         }
 563
 564         return 0;
 565
 566 err_register_sysfs:
 567         lp55xx_unregister_leds(led, chip);
 568 err_register_leds:
 569         lp55xx_deinit_device(chip);
 570 err_init:
 571         return ret;
 572 }
 573
 574 static int lp5562_remove(struct i2c_client *client)
 575 {
 576         struct lp55xx_led *led = i2c_get_clientdata(client);
 577         struct lp55xx_chip *chip = led->chip;
 578
 579         lp5562_stop_engine(chip);
 580
 581         lp55xx_unregister_sysfs(chip);
 582         lp55xx_unregister_leds(led, chip);
 583         lp55xx_deinit_device(chip);
 584
 585         return 0;
 586 }
 587
 588 static const struct i2c_device_id lp5562_id[] = {
 589         { "lp5562", 0 },
 590         { }
 591 };
 592 MODULE_DEVICE_TABLE(i2c, lp5562_id);
 593
 594 #ifdef CONFIG_OF
 595 static const struct of_device_id of_lp5562_leds_match[] = {
 596         { .compatible = "ti,lp5562", },
 597         {},
 598 };
 599
 600 MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
 601 #endif
 602
 603 static struct i2c_driver lp5562_driver = {
 604         .driver = {
 605                 .name   = "lp5562",
 606                 .of_match_table = of_match_ptr(of_lp5562_leds_match),
 607         },
 608         .probe          = lp5562_probe,
 609         .remove         = lp5562_remove,
 610         .id_table       = lp5562_id,
 611 };
 612
 613 module_i2c_driver(lp5562_driver);
 614
 615 MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
 616 MODULE_AUTHOR("Milo Kim");
 617 MODULE_LICENSE("GPL");