[PATCH] kexec: s390 support
[linux/fpc-iii.git] / include / asm-sparc / timer.h
blobb16eb739dddbce898ff23c13099e2fb7d0fcf01b
1 /* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $
2 * timer.h: Definitions for the timer chips on the Sparc.
4 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
5 */
7 #include <linux/config.h>
9 #ifndef _SPARC_TIMER_H
10 #define _SPARC_TIMER_H
12 #include <asm/system.h> /* For SUN4M_NCPUS */
13 #include <asm/sun4paddr.h>
14 #include <asm/btfixup.h>
16 /* Timer structures. The interrupt timer has two properties which
17 * are the counter (which is handled in do_timer in sched.c) and the limit.
18 * This limit is where the timer's counter 'wraps' around. Oddly enough,
19 * the sun4c timer when it hits the limit wraps back to 1 and not zero
20 * thus when calculating the value at which it will fire a microsecond you
21 * must adjust by one. Thanks SUN for designing such great hardware ;(
24 /* Note that I am only going to use the timer that interrupts at
25 * Sparc IRQ 10. There is another one available that can fire at
26 * IRQ 14. Currently it is left untouched, we keep the PROM's limit
27 * register value and let the prom take these interrupts. This allows
28 * L1-A to work.
31 struct sun4c_timer_info {
32 __volatile__ unsigned int cur_count10;
33 __volatile__ unsigned int timer_limit10;
34 __volatile__ unsigned int cur_count14;
35 __volatile__ unsigned int timer_limit14;
38 #define SUN4C_TIMER_PHYSADDR 0xf3000000
39 #ifdef CONFIG_SUN4
40 #define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
41 #else
42 #define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
43 #endif
45 /* A sun4m has two blocks of registers which are probably of the same
46 * structure. LSI Logic's L64851 is told to _decrement_ from the limit
47 * value. Aurora behaves similarly but its limit value is compacted in
48 * other fashion (it's wider). Documented fields are defined here.
51 /* As with the interrupt register, we have two classes of timer registers
52 * which are per-cpu and master. Per-cpu timers only hit that cpu and are
53 * only level 14 ticks, master timer hits all cpus and is level 10.
56 #define SUN4M_PRM_CNT_L 0x80000000
57 #define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00
59 struct sun4m_timer_percpu_info {
60 __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */
61 __volatile__ unsigned int l14_cur_count;
63 /* This register appears to be write only and/or inaccessible
64 * on Uni-Processor sun4m machines.
66 __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */
68 __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */
69 __volatile__ unsigned char space[PAGE_SIZE - 16];
72 struct sun4m_timer_regs {
73 struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
74 volatile unsigned int l10_timer_limit;
75 volatile unsigned int l10_cur_count;
77 /* Again, this appears to be write only and/or inaccessible
78 * on uni-processor sun4m machines.
80 volatile unsigned int l10_limit_noclear;
82 /* This register too, it must be magic. */
83 volatile unsigned int foobar;
85 volatile unsigned int cfg; /* equals zero at boot time... */
88 extern struct sun4m_timer_regs *sun4m_timers;
90 #define SUN4D_PRM_CNT_L 0x80000000
91 #define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00
93 struct sun4d_timer_regs {
94 volatile unsigned int l10_timer_limit;
95 volatile unsigned int l10_cur_countx;
96 volatile unsigned int l10_limit_noclear;
97 volatile unsigned int ctrl;
98 volatile unsigned int l10_cur_count;
101 extern struct sun4d_timer_regs *sun4d_timers;
103 extern __volatile__ unsigned int *master_l10_counter;
104 extern __volatile__ unsigned int *master_l10_limit;
106 /* FIXME: Make do_[gs]ettimeofday btfixup calls */
107 BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
108 #define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
110 #endif /* !(_SPARC_TIMER_H) */