2 * Copyright 2007-2010 Analog Devices Inc.
4 * Licensed under the Clear BSD license or the GPL-2 (or later)
10 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
11 #include "defBF54x_base.h"
13 /* The following are the #defines needed by ADSP-BF542 that are not in the common header */
17 #define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
18 #define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
19 #define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
20 #define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
21 #define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
22 #define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
23 #define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
24 #define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
25 #define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
26 #define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
27 #define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
28 #define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
29 #define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
30 #define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
31 #define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
32 #define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
33 #define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
34 #define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
35 #define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
36 #define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
37 #define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
38 #define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
39 #define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
40 #define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
41 #define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
45 #define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
46 #define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
47 #define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
48 #define SDH_COMMAND 0xffc0390c /* SDH Command */
49 #define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
50 #define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
51 #define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
52 #define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
53 #define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
54 #define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
55 #define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
56 #define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
57 #define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
58 #define SDH_STATUS 0xffc03934 /* SDH Status */
59 #define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
60 #define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
61 #define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
62 #define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
63 #define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
64 #define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
65 #define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
66 #define SDH_CFG 0xffc039c8 /* SDH Configuration */
67 #define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
68 #define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
69 #define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
70 #define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
71 #define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
72 #define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
73 #define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
74 #define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
75 #define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
77 /* USB Control Registers */
79 #define USB_FADDR 0xffc03c00 /* Function address register */
80 #define USB_POWER 0xffc03c04 /* Power management register */
81 #define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
82 #define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
83 #define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
84 #define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
85 #define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
86 #define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
87 #define USB_FRAME 0xffc03c20 /* USB frame number */
88 #define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
89 #define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
90 #define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
91 #define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
93 /* USB Packet Control Registers */
95 #define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
96 #define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
97 #define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
98 #define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
99 #define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
100 #define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
101 #define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
102 #define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
103 #define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
104 #define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
105 #define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
106 #define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
107 #define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
109 /* USB Endpoint FIFO Registers */
111 #define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
112 #define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
113 #define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
114 #define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
115 #define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
116 #define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
117 #define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
118 #define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
120 /* USB OTG Control Registers */
122 #define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
123 #define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
124 #define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
126 /* USB Phy Control Registers */
128 #define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
129 #define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
130 #define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
131 #define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
132 #define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
134 /* (APHY_CNTRL is for ADI usage only) */
136 #define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
138 /* (APHY_CALIB is for ADI usage only) */
140 #define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
141 #define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
143 #define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
144 #define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
146 /* USB Endpoint 0 Control Registers */
148 #define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
149 #define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
150 #define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
151 #define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
152 #define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
153 #define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
154 #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
155 #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
156 #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
158 /* USB Endpoint 1 Control Registers */
160 #define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
161 #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
162 #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
163 #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
164 #define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
165 #define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
166 #define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
167 #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
168 #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
169 #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
171 /* USB Endpoint 2 Control Registers */
173 #define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
174 #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
175 #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
176 #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
177 #define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
178 #define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
179 #define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
180 #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
181 #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
182 #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
184 /* USB Endpoint 3 Control Registers */
186 #define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
187 #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
188 #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
189 #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
190 #define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
191 #define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
192 #define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
193 #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
194 #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
195 #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
197 /* USB Endpoint 4 Control Registers */
199 #define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
200 #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
201 #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
202 #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
203 #define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
204 #define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
205 #define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
206 #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
207 #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
208 #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
210 /* USB Endpoint 5 Control Registers */
212 #define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
213 #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
214 #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
215 #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
216 #define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
217 #define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
218 #define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
219 #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
220 #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
221 #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
223 /* USB Endpoint 6 Control Registers */
225 #define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
226 #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
227 #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
228 #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
229 #define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
230 #define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
231 #define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
232 #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
233 #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
234 #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
236 /* USB Endpoint 7 Control Registers */
238 #define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
239 #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
240 #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
241 #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
242 #define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
243 #define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
244 #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
245 #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
246 #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
247 #define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
248 #define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
249 #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
251 /* USB Channel 0 Config Registers */
253 #define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
254 #define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
255 #define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
256 #define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
257 #define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
259 /* USB Channel 1 Config Registers */
261 #define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
262 #define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
263 #define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
264 #define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
265 #define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
267 /* USB Channel 2 Config Registers */
269 #define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
270 #define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
271 #define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
272 #define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
273 #define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
275 /* USB Channel 3 Config Registers */
277 #define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
278 #define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
279 #define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
280 #define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
281 #define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
283 /* USB Channel 4 Config Registers */
285 #define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
286 #define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
287 #define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
288 #define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
289 #define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
291 /* USB Channel 5 Config Registers */
293 #define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
294 #define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
295 #define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
296 #define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
297 #define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
299 /* USB Channel 6 Config Registers */
301 #define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
302 #define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
303 #define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
304 #define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
305 #define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
307 /* USB Channel 7 Config Registers */
309 #define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
310 #define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
311 #define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
312 #define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
313 #define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
315 /* Keypad Registers */
317 #define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
318 #define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
319 #define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
320 #define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
321 #define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
322 #define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
325 /* ********************************************************** */
326 /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
327 /* and MULTI BIT READ MACROS */
328 /* ********************************************************** */
330 /* Bit masks for KPAD_CTL */
332 #define KPAD_EN 0x1 /* Keypad Enable */
333 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
334 #define KPAD_ROWEN 0x1c00 /* Row Enable Width */
335 #define KPAD_COLEN 0xe000 /* Column Enable Width */
337 /* Bit masks for KPAD_PRESCALE */
339 #define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
341 /* Bit masks for KPAD_MSEL */
343 #define DBON_SCALE 0xff /* Debounce Scale Value */
344 #define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
346 /* Bit masks for KPAD_ROWCOL */
348 #define KPAD_ROW 0xff /* Rows Pressed */
349 #define KPAD_COL 0xff00 /* Columns Pressed */
351 /* Bit masks for KPAD_STAT */
353 #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
354 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
355 #define KPAD_PRESSED 0x8 /* Key press current status */
357 /* Bit masks for KPAD_SOFTEVAL */
359 #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
361 /* Bit masks for ATAPI_CONTROL */
363 #define PIO_START 0x1 /* Start PIO/Reg Op */
364 #define MULTI_START 0x2 /* Start Multi-DMA Op */
365 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */
366 #define XFER_DIR 0x8 /* Transfer Direction */
367 #define IORDY_EN 0x10 /* IORDY Enable */
368 #define FIFO_FLUSH 0x20 /* Flush FIFOs */
369 #define SOFT_RST 0x40 /* Soft Reset */
370 #define DEV_RST 0x80 /* Device Reset */
371 #define TFRCNT_RST 0x100 /* Trans Count Reset */
372 #define END_ON_TERM 0x200 /* End/Terminate Select */
373 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
374 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
376 /* Bit masks for ATAPI_STATUS */
378 #define PIO_XFER_ON 0x1 /* PIO transfer in progress */
379 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
380 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
381 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
383 /* Bit masks for ATAPI_DEV_ADDR */
385 #define DEV_ADDR 0x1f /* Device Address */
387 /* Bit masks for ATAPI_INT_MASK */
389 #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
390 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
391 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
392 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
393 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
394 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
395 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
396 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
397 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
399 /* Bit masks for ATAPI_INT_STATUS */
401 #define ATAPI_DEV_INT 0x1 /* Device interrupt status */
402 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
403 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
404 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
405 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
406 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
407 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
408 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
409 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
411 /* Bit masks for ATAPI_LINE_STATUS */
413 #define ATAPI_INTR 0x1 /* Device interrupt to host line status */
414 #define ATAPI_DASP 0x2 /* Device dasp to host line status */
415 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
416 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
417 #define ATAPI_ADDR 0x70 /* ATAPI address line status */
418 #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
419 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
420 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */
421 #define ATAPI_DIORN 0x400 /* ATAPI read line status */
422 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
424 /* Bit masks for ATAPI_SM_STATE */
426 #define PIO_CSTATE 0xf /* PIO mode state machine current state */
427 #define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
428 #define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
429 #define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
431 /* Bit masks for ATAPI_TERMINATE */
433 #define ATAPI_HOST_TERM 0x1 /* Host terminationation */
435 /* Bit masks for ATAPI_REG_TIM_0 */
437 #define T2_REG 0xff /* End of cycle time for register access transfers */
438 #define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
440 /* Bit masks for ATAPI_PIO_TIM_0 */
442 #define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
443 #define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
444 #define T4_REG 0xf000 /* DIOW data hold */
446 /* Bit masks for ATAPI_PIO_TIM_1 */
448 #define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
450 /* Bit masks for ATAPI_MULTI_TIM_0 */
452 #define TD 0xff /* DIOR/DIOW asserted pulsewidth */
453 #define TM 0xff00 /* Time from address valid to DIOR/DIOW */
455 /* Bit masks for ATAPI_MULTI_TIM_1 */
457 #define TKW 0xff /* Selects DIOW negated pulsewidth */
458 #define TKR 0xff00 /* Selects DIOR negated pulsewidth */
460 /* Bit masks for ATAPI_MULTI_TIM_2 */
462 #define TH 0xff /* Selects DIOW data hold */
463 #define TEOC 0xff00 /* Selects end of cycle for DMA */
465 /* Bit masks for ATAPI_ULTRA_TIM_0 */
467 #define TACK 0xff /* Selects setup and hold times for TACK */
468 #define TENV 0xff00 /* Selects envelope time */
470 /* Bit masks for ATAPI_ULTRA_TIM_1 */
472 #define TDVS 0xff /* Selects data valid setup time */
473 #define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
475 /* Bit masks for ATAPI_ULTRA_TIM_2 */
477 #define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
478 #define TMLI 0xff00 /* Selects interlock time */
480 /* Bit masks for ATAPI_ULTRA_TIM_3 */
482 #define TZAH 0xff /* Selects minimum delay required for output */
483 #define READY_PAUSE 0xff00 /* Selects ready to pause */
485 /* Bit masks for USB_FADDR */
487 #define FUNCTION_ADDRESS 0x7f /* Function address */
489 /* Bit masks for USB_POWER */
491 #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
492 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
493 #define RESUME_MODE 0x4 /* DMA Mode */
494 #define RESET 0x8 /* Reset indicator */
495 #define HS_MODE 0x10 /* High Speed mode indicator */
496 #define HS_ENABLE 0x20 /* high Speed Enable */
497 #define SOFT_CONN 0x40 /* Soft connect */
498 #define ISO_UPDATE 0x80 /* Isochronous update */
500 /* Bit masks for USB_INTRTX */
502 #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
503 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
504 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
505 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
506 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
507 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
508 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
509 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
511 /* Bit masks for USB_INTRRX */
513 #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
514 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
515 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
516 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
517 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
518 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
519 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
521 /* Bit masks for USB_INTRTXE */
523 #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
524 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
525 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
526 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
527 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
528 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
529 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
530 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
532 /* Bit masks for USB_INTRRXE */
534 #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
535 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
536 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
537 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
538 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
539 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
540 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
542 /* Bit masks for USB_INTRUSB */
544 #define SUSPEND_B 0x1 /* Suspend indicator */
545 #define RESUME_B 0x2 /* Resume indicator */
546 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
547 #define SOF_B 0x8 /* Start of frame */
548 #define CONN_B 0x10 /* Connection indicator */
549 #define DISCON_B 0x20 /* Disconnect indicator */
550 #define SESSION_REQ_B 0x40 /* Session Request */
551 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
553 /* Bit masks for USB_INTRUSBE */
555 #define SUSPEND_BE 0x1 /* Suspend indicator int enable */
556 #define RESUME_BE 0x2 /* Resume indicator int enable */
557 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
558 #define SOF_BE 0x8 /* Start of frame int enable */
559 #define CONN_BE 0x10 /* Connection indicator int enable */
560 #define DISCON_BE 0x20 /* Disconnect indicator int enable */
561 #define SESSION_REQ_BE 0x40 /* Session Request int enable */
562 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
564 /* Bit masks for USB_FRAME */
566 #define FRAME_NUMBER 0x7ff /* Frame number */
568 /* Bit masks for USB_INDEX */
570 #define SELECTED_ENDPOINT 0xf /* selected endpoint */
572 /* Bit masks for USB_GLOBAL_CTL */
574 #define GLOBAL_ENA 0x1 /* enables USB module */
575 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
576 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
577 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
578 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
579 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
580 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
581 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
582 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
583 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
584 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
585 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
586 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
587 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
588 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
590 /* Bit masks for USB_OTG_DEV_CTL */
592 #define SESSION 0x1 /* session indicator */
593 #define HOST_REQ 0x2 /* Host negotiation request */
594 #define HOST_MODE 0x4 /* indicates USBDRC is a host */
595 #define VBUS0 0x8 /* Vbus level indicator[0] */
596 #define VBUS1 0x10 /* Vbus level indicator[1] */
597 #define LSDEV 0x20 /* Low-speed indicator */
598 #define FSDEV 0x40 /* Full or High-speed indicator */
599 #define B_DEVICE 0x80 /* A' or 'B' device indicator */
601 /* Bit masks for USB_OTG_VBUS_IRQ */
603 #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
604 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
605 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
606 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
607 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
608 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
610 /* Bit masks for USB_OTG_VBUS_MASK */
612 #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
613 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
614 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
615 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
616 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
617 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
619 /* Bit masks for USB_CSR0 */
621 #define RXPKTRDY 0x1 /* data packet receive indicator */
622 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */
623 #define STALL_SENT 0x4 /* STALL handshake sent */
624 #define DATAEND 0x8 /* Data end indicator */
625 #define SETUPEND 0x10 /* Setup end */
626 #define SENDSTALL 0x20 /* Send STALL handshake */
627 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
628 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
629 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */
630 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
631 #define SETUPPKT_H 0x8 /* send Setup token host mode */
632 #define ERROR_H 0x10 /* timeout error indicator host mode */
633 #define REQPKT_H 0x20 /* Request an IN transaction host mode */
634 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */
635 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
637 /* Bit masks for USB_COUNT0 */
639 #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
641 /* Bit masks for USB_NAKLIMIT0 */
643 #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
645 /* Bit masks for USB_TX_MAX_PACKET */
647 #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
649 /* Bit masks for USB_RX_MAX_PACKET */
651 #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
653 /* Bit masks for USB_TXCSR */
655 #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
656 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
657 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
658 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
659 #define STALL_SEND_T 0x10 /* issue a Stall handshake */
660 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */
661 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
662 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */
663 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
664 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
665 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
666 #define ISO_T 0x4000 /* enable Isochronous transfers */
667 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
668 #define ERROR_TH 0x4 /* error condition host mode */
669 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
670 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
672 /* Bit masks for USB_TXCOUNT */
674 #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
676 /* Bit masks for USB_RXCSR */
678 #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
679 #define FIFO_FULL_R 0x2 /* FIFO not empty */
680 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
681 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
682 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
683 #define STALL_SEND_R 0x20 /* issue a Stall handshake */
684 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */
685 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
686 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */
687 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
688 #define DISNYET_R 0x1000 /* disable Nyet handshakes */
689 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
690 #define ISO_R 0x4000 /* enable Isochronous transfers */
691 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
692 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
693 #define REQPKT_RH 0x20 /* request an IN transaction host mode */
694 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
695 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
696 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
697 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
699 /* Bit masks for USB_RXCOUNT */
701 #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
703 /* Bit masks for USB_TXTYPE */
705 #define TARGET_EP_NO_T 0xf /* EP number */
706 #define PROTOCOL_T 0xc /* transfer type */
708 /* Bit masks for USB_TXINTERVAL */
710 #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
712 /* Bit masks for USB_RXTYPE */
714 #define TARGET_EP_NO_R 0xf /* EP number */
715 #define PROTOCOL_R 0xc /* transfer type */
717 /* Bit masks for USB_RXINTERVAL */
719 #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
721 /* Bit masks for USB_DMA_INTERRUPT */
723 #define DMA0_INT 0x1 /* DMA0 pending interrupt */
724 #define DMA1_INT 0x2 /* DMA1 pending interrupt */
725 #define DMA2_INT 0x4 /* DMA2 pending interrupt */
726 #define DMA3_INT 0x8 /* DMA3 pending interrupt */
727 #define DMA4_INT 0x10 /* DMA4 pending interrupt */
728 #define DMA5_INT 0x20 /* DMA5 pending interrupt */
729 #define DMA6_INT 0x40 /* DMA6 pending interrupt */
730 #define DMA7_INT 0x80 /* DMA7 pending interrupt */
732 /* Bit masks for USB_DMAxCONTROL */
734 #define DMA_ENA 0x1 /* DMA enable */
735 #define DIRECTION 0x2 /* direction of DMA transfer */
736 #define MODE 0x4 /* DMA Bus error */
737 #define INT_ENA 0x8 /* Interrupt enable */
738 #define EPNUM 0xf0 /* EP number */
739 #define BUSERROR 0x100 /* DMA Bus error */
741 /* Bit masks for USB_DMAxADDRHIGH */
743 #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
745 /* Bit masks for USB_DMAxADDRLOW */
747 #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
749 /* Bit masks for USB_DMAxCOUNTHIGH */
751 #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
753 /* Bit masks for USB_DMAxCOUNTLOW */
755 #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
758 /* ******************************************* */
759 /* MULTI BIT MACRO ENUMERATIONS */
760 /* ******************************************* */
763 #endif /* _DEF_BF542_H */
