mtd: gpmi: decouple the chip select from the DMA channel
[linux/fpc-iii.git] / drivers / hwmon / tmp102.c
blobd7b47abf37fe88c259da4f3d7dd73a766af7b9f7
1 /* Texas Instruments TMP102 SMBus temperature sensor driver
3 * Copyright (C) 2010 Steven King <sfking@fdwdc.com>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
20 #include <linux/module.h>
21 #include <linux/init.h>
22 #include <linux/slab.h>
23 #include <linux/i2c.h>
24 #include <linux/hwmon.h>
25 #include <linux/hwmon-sysfs.h>
26 #include <linux/err.h>
27 #include <linux/mutex.h>
28 #include <linux/device.h>
29 #include <linux/jiffies.h>
31 #define DRIVER_NAME "tmp102"
33 #define TMP102_TEMP_REG 0x00
34 #define TMP102_CONF_REG 0x01
35 /* note: these bit definitions are byte swapped */
36 #define TMP102_CONF_SD 0x0100
37 #define TMP102_CONF_TM 0x0200
38 #define TMP102_CONF_POL 0x0400
39 #define TMP102_CONF_F0 0x0800
40 #define TMP102_CONF_F1 0x1000
41 #define TMP102_CONF_R0 0x2000
42 #define TMP102_CONF_R1 0x4000
43 #define TMP102_CONF_OS 0x8000
44 #define TMP102_CONF_EM 0x0010
45 #define TMP102_CONF_AL 0x0020
46 #define TMP102_CONF_CR0 0x0040
47 #define TMP102_CONF_CR1 0x0080
48 #define TMP102_TLOW_REG 0x02
49 #define TMP102_THIGH_REG 0x03
51 struct tmp102 {
52 struct device *hwmon_dev;
53 struct mutex lock;
54 u16 config_orig;
55 unsigned long last_update;
56 int temp[3];
59 /* convert left adjusted 13-bit TMP102 register value to milliCelsius */
60 static inline int tmp102_reg_to_mC(s16 val)
62 return ((val & ~0x01) * 1000) / 128;
65 /* convert milliCelsius to left adjusted 13-bit TMP102 register value */
66 static inline u16 tmp102_mC_to_reg(int val)
68 return (val * 128) / 1000;
71 static const u8 tmp102_reg[] = {
72 TMP102_TEMP_REG,
73 TMP102_TLOW_REG,
74 TMP102_THIGH_REG,
77 static struct tmp102 *tmp102_update_device(struct i2c_client *client)
79 struct tmp102 *tmp102 = i2c_get_clientdata(client);
81 mutex_lock(&tmp102->lock);
82 if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
83 int i;
84 for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
85 int status = i2c_smbus_read_word_swapped(client,
86 tmp102_reg[i]);
87 if (status > -1)
88 tmp102->temp[i] = tmp102_reg_to_mC(status);
90 tmp102->last_update = jiffies;
92 mutex_unlock(&tmp102->lock);
93 return tmp102;
96 static ssize_t tmp102_show_temp(struct device *dev,
97 struct device_attribute *attr,
98 char *buf)
100 struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
101 struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
103 return sprintf(buf, "%d\n", tmp102->temp[sda->index]);
106 static ssize_t tmp102_set_temp(struct device *dev,
107 struct device_attribute *attr,
108 const char *buf, size_t count)
110 struct sensor_device_attribute *sda = to_sensor_dev_attr(attr);
111 struct i2c_client *client = to_i2c_client(dev);
112 struct tmp102 *tmp102 = i2c_get_clientdata(client);
113 long val;
114 int status;
116 if (kstrtol(buf, 10, &val) < 0)
117 return -EINVAL;
118 val = clamp_val(val, -256000, 255000);
120 mutex_lock(&tmp102->lock);
121 tmp102->temp[sda->index] = val;
122 status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index],
123 tmp102_mC_to_reg(val));
124 mutex_unlock(&tmp102->lock);
125 return status ? : count;
128 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0);
130 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp,
131 tmp102_set_temp, 1);
133 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp,
134 tmp102_set_temp, 2);
136 static struct attribute *tmp102_attributes[] = {
137 &sensor_dev_attr_temp1_input.dev_attr.attr,
138 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
139 &sensor_dev_attr_temp1_max.dev_attr.attr,
140 NULL
143 static const struct attribute_group tmp102_attr_group = {
144 .attrs = tmp102_attributes,
147 #define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1)
148 #define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL)
150 static int tmp102_probe(struct i2c_client *client,
151 const struct i2c_device_id *id)
153 struct tmp102 *tmp102;
154 int status;
156 if (!i2c_check_functionality(client->adapter,
157 I2C_FUNC_SMBUS_WORD_DATA)) {
158 dev_err(&client->dev,
159 "adapter doesn't support SMBus word transactions\n");
160 return -ENODEV;
163 tmp102 = devm_kzalloc(&client->dev, sizeof(*tmp102), GFP_KERNEL);
164 if (!tmp102)
165 return -ENOMEM;
167 i2c_set_clientdata(client, tmp102);
169 status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
170 if (status < 0) {
171 dev_err(&client->dev, "error reading config register\n");
172 return status;
174 tmp102->config_orig = status;
175 status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
176 TMP102_CONFIG);
177 if (status < 0) {
178 dev_err(&client->dev, "error writing config register\n");
179 goto fail_restore_config;
181 status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
182 if (status < 0) {
183 dev_err(&client->dev, "error reading config register\n");
184 goto fail_restore_config;
186 status &= ~TMP102_CONFIG_RD_ONLY;
187 if (status != TMP102_CONFIG) {
188 dev_err(&client->dev, "config settings did not stick\n");
189 status = -ENODEV;
190 goto fail_restore_config;
192 tmp102->last_update = jiffies - HZ;
193 mutex_init(&tmp102->lock);
195 status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group);
196 if (status) {
197 dev_dbg(&client->dev, "could not create sysfs files\n");
198 goto fail_restore_config;
200 tmp102->hwmon_dev = hwmon_device_register(&client->dev);
201 if (IS_ERR(tmp102->hwmon_dev)) {
202 dev_dbg(&client->dev, "unable to register hwmon device\n");
203 status = PTR_ERR(tmp102->hwmon_dev);
204 goto fail_remove_sysfs;
207 dev_info(&client->dev, "initialized\n");
209 return 0;
211 fail_remove_sysfs:
212 sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
213 fail_restore_config:
214 i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
215 tmp102->config_orig);
216 return status;
219 static int tmp102_remove(struct i2c_client *client)
221 struct tmp102 *tmp102 = i2c_get_clientdata(client);
223 hwmon_device_unregister(tmp102->hwmon_dev);
224 sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
226 /* Stop monitoring if device was stopped originally */
227 if (tmp102->config_orig & TMP102_CONF_SD) {
228 int config;
230 config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
231 if (config >= 0)
232 i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
233 config | TMP102_CONF_SD);
236 return 0;
239 #ifdef CONFIG_PM
240 static int tmp102_suspend(struct device *dev)
242 struct i2c_client *client = to_i2c_client(dev);
243 int config;
245 config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
246 if (config < 0)
247 return config;
249 config |= TMP102_CONF_SD;
250 return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
253 static int tmp102_resume(struct device *dev)
255 struct i2c_client *client = to_i2c_client(dev);
256 int config;
258 config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
259 if (config < 0)
260 return config;
262 config &= ~TMP102_CONF_SD;
263 return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
266 static const struct dev_pm_ops tmp102_dev_pm_ops = {
267 .suspend = tmp102_suspend,
268 .resume = tmp102_resume,
271 #define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
272 #else
273 #define TMP102_DEV_PM_OPS NULL
274 #endif /* CONFIG_PM */
276 static const struct i2c_device_id tmp102_id[] = {
277 { "tmp102", 0 },
280 MODULE_DEVICE_TABLE(i2c, tmp102_id);
282 static struct i2c_driver tmp102_driver = {
283 .driver.name = DRIVER_NAME,
284 .driver.pm = TMP102_DEV_PM_OPS,
285 .probe = tmp102_probe,
286 .remove = tmp102_remove,
287 .id_table = tmp102_id,
290 module_i2c_driver(tmp102_driver);
292 MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
293 MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver");
294 MODULE_LICENSE("GPL");