mtd: gpmi: decouple the chip select from the DMA channel
[linux/fpc-iii.git] / drivers / rtc / rtc-ds1374.c
blob9e6e14fb53d740bd4a8085fe617506245131443a
1 /*
2 * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
4 * Based on code by Randy Vinson <rvinson@mvista.com>,
5 * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>.
7 * Copyright (C) 2006-2007 Freescale Semiconductor
9 * 2005 (c) MontaVista Software, Inc. This file is licensed under
10 * the terms of the GNU General Public License version 2. This program
11 * is licensed "as is" without any warranty of any kind, whether express
12 * or implied.
15 * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
16 * recommened in .../Documentation/i2c/writing-clients section
17 * "Sending and receiving", using SMBus level communication is preferred.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/interrupt.h>
23 #include <linux/i2c.h>
24 #include <linux/rtc.h>
25 #include <linux/bcd.h>
26 #include <linux/workqueue.h>
27 #include <linux/slab.h>
28 #include <linux/pm.h>
30 #define DS1374_REG_TOD0 0x00 /* Time of Day */
31 #define DS1374_REG_TOD1 0x01
32 #define DS1374_REG_TOD2 0x02
33 #define DS1374_REG_TOD3 0x03
34 #define DS1374_REG_WDALM0 0x04 /* Watchdog/Alarm */
35 #define DS1374_REG_WDALM1 0x05
36 #define DS1374_REG_WDALM2 0x06
37 #define DS1374_REG_CR 0x07 /* Control */
38 #define DS1374_REG_CR_AIE 0x01 /* Alarm Int. Enable */
39 #define DS1374_REG_CR_WDALM 0x20 /* 1=Watchdog, 0=Alarm */
40 #define DS1374_REG_CR_WACE 0x40 /* WD/Alarm counter enable */
41 #define DS1374_REG_SR 0x08 /* Status */
42 #define DS1374_REG_SR_OSF 0x80 /* Oscillator Stop Flag */
43 #define DS1374_REG_SR_AF 0x01 /* Alarm Flag */
44 #define DS1374_REG_TCR 0x09 /* Trickle Charge */
46 static const struct i2c_device_id ds1374_id[] = {
47 { "ds1374", 0 },
48 { }
50 MODULE_DEVICE_TABLE(i2c, ds1374_id);
52 struct ds1374 {
53 struct i2c_client *client;
54 struct rtc_device *rtc;
55 struct work_struct work;
57 /* The mutex protects alarm operations, and prevents a race
58 * between the enable_irq() in the workqueue and the free_irq()
59 * in the remove function.
61 struct mutex mutex;
62 int exiting;
65 static struct i2c_driver ds1374_driver;
67 static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
68 int reg, int nbytes)
70 u8 buf[4];
71 int ret;
72 int i;
74 if (nbytes > 4) {
75 WARN_ON(1);
76 return -EINVAL;
79 ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
81 if (ret < 0)
82 return ret;
83 if (ret < nbytes)
84 return -EIO;
86 for (i = nbytes - 1, *time = 0; i >= 0; i--)
87 *time = (*time << 8) | buf[i];
89 return 0;
92 static int ds1374_write_rtc(struct i2c_client *client, u32 time,
93 int reg, int nbytes)
95 u8 buf[4];
96 int i;
98 if (nbytes > 4) {
99 WARN_ON(1);
100 return -EINVAL;
103 for (i = 0; i < nbytes; i++) {
104 buf[i] = time & 0xff;
105 time >>= 8;
108 return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
111 static int ds1374_check_rtc_status(struct i2c_client *client)
113 int ret = 0;
114 int control, stat;
116 stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
117 if (stat < 0)
118 return stat;
120 if (stat & DS1374_REG_SR_OSF)
121 dev_warn(&client->dev,
122 "oscillator discontinuity flagged, time unreliable\n");
124 stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
126 ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
127 if (ret < 0)
128 return ret;
130 /* If the alarm is pending, clear it before requesting
131 * the interrupt, so an interrupt event isn't reported
132 * before everything is initialized.
135 control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
136 if (control < 0)
137 return control;
139 control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
140 return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
143 static int ds1374_read_time(struct device *dev, struct rtc_time *time)
145 struct i2c_client *client = to_i2c_client(dev);
146 u32 itime;
147 int ret;
149 ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
150 if (!ret)
151 rtc_time_to_tm(itime, time);
153 return ret;
156 static int ds1374_set_time(struct device *dev, struct rtc_time *time)
158 struct i2c_client *client = to_i2c_client(dev);
159 unsigned long itime;
161 rtc_tm_to_time(time, &itime);
162 return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
165 /* The ds1374 has a decrementer for an alarm, rather than a comparator.
166 * If the time of day is changed, then the alarm will need to be
167 * reset.
169 static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
171 struct i2c_client *client = to_i2c_client(dev);
172 struct ds1374 *ds1374 = i2c_get_clientdata(client);
173 u32 now, cur_alarm;
174 int cr, sr;
175 int ret = 0;
177 if (client->irq <= 0)
178 return -EINVAL;
180 mutex_lock(&ds1374->mutex);
182 cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
183 if (ret < 0)
184 goto out;
186 sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
187 if (ret < 0)
188 goto out;
190 ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
191 if (ret)
192 goto out;
194 ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
195 if (ret)
196 goto out;
198 rtc_time_to_tm(now + cur_alarm, &alarm->time);
199 alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
200 alarm->pending = !!(sr & DS1374_REG_SR_AF);
202 out:
203 mutex_unlock(&ds1374->mutex);
204 return ret;
207 static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
209 struct i2c_client *client = to_i2c_client(dev);
210 struct ds1374 *ds1374 = i2c_get_clientdata(client);
211 struct rtc_time now;
212 unsigned long new_alarm, itime;
213 int cr;
214 int ret = 0;
216 if (client->irq <= 0)
217 return -EINVAL;
219 ret = ds1374_read_time(dev, &now);
220 if (ret < 0)
221 return ret;
223 rtc_tm_to_time(&alarm->time, &new_alarm);
224 rtc_tm_to_time(&now, &itime);
226 /* This can happen due to races, in addition to dates that are
227 * truly in the past. To avoid requiring the caller to check for
228 * races, dates in the past are assumed to be in the recent past
229 * (i.e. not something that we'd rather the caller know about via
230 * an error), and the alarm is set to go off as soon as possible.
232 if (time_before_eq(new_alarm, itime))
233 new_alarm = 1;
234 else
235 new_alarm -= itime;
237 mutex_lock(&ds1374->mutex);
239 ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
240 if (ret < 0)
241 goto out;
243 /* Disable any existing alarm before setting the new one
244 * (or lack thereof). */
245 cr &= ~DS1374_REG_CR_WACE;
247 ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
248 if (ret < 0)
249 goto out;
251 ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
252 if (ret)
253 goto out;
255 if (alarm->enabled) {
256 cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
257 cr &= ~DS1374_REG_CR_WDALM;
259 ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
262 out:
263 mutex_unlock(&ds1374->mutex);
264 return ret;
267 static irqreturn_t ds1374_irq(int irq, void *dev_id)
269 struct i2c_client *client = dev_id;
270 struct ds1374 *ds1374 = i2c_get_clientdata(client);
272 disable_irq_nosync(irq);
273 schedule_work(&ds1374->work);
274 return IRQ_HANDLED;
277 static void ds1374_work(struct work_struct *work)
279 struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
280 struct i2c_client *client = ds1374->client;
281 int stat, control;
283 mutex_lock(&ds1374->mutex);
285 stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
286 if (stat < 0)
287 goto unlock;
289 if (stat & DS1374_REG_SR_AF) {
290 stat &= ~DS1374_REG_SR_AF;
291 i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
293 control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
294 if (control < 0)
295 goto out;
297 control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
298 i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
300 rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
303 out:
304 if (!ds1374->exiting)
305 enable_irq(client->irq);
306 unlock:
307 mutex_unlock(&ds1374->mutex);
310 static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
312 struct i2c_client *client = to_i2c_client(dev);
313 struct ds1374 *ds1374 = i2c_get_clientdata(client);
314 int ret;
316 mutex_lock(&ds1374->mutex);
318 ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
319 if (ret < 0)
320 goto out;
322 if (enabled) {
323 ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
324 ret &= ~DS1374_REG_CR_WDALM;
325 } else {
326 ret &= ~DS1374_REG_CR_WACE;
328 ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
330 out:
331 mutex_unlock(&ds1374->mutex);
332 return ret;
335 static const struct rtc_class_ops ds1374_rtc_ops = {
336 .read_time = ds1374_read_time,
337 .set_time = ds1374_set_time,
338 .read_alarm = ds1374_read_alarm,
339 .set_alarm = ds1374_set_alarm,
340 .alarm_irq_enable = ds1374_alarm_irq_enable,
343 static int ds1374_probe(struct i2c_client *client,
344 const struct i2c_device_id *id)
346 struct ds1374 *ds1374;
347 int ret;
349 ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
350 if (!ds1374)
351 return -ENOMEM;
353 ds1374->client = client;
354 i2c_set_clientdata(client, ds1374);
356 INIT_WORK(&ds1374->work, ds1374_work);
357 mutex_init(&ds1374->mutex);
359 ret = ds1374_check_rtc_status(client);
360 if (ret)
361 return ret;
363 if (client->irq > 0) {
364 ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0,
365 "ds1374", client);
366 if (ret) {
367 dev_err(&client->dev, "unable to request IRQ\n");
368 return ret;
371 device_set_wakeup_capable(&client->dev, 1);
374 ds1374->rtc = devm_rtc_device_register(&client->dev, client->name,
375 &ds1374_rtc_ops, THIS_MODULE);
376 if (IS_ERR(ds1374->rtc)) {
377 dev_err(&client->dev, "unable to register the class device\n");
378 return PTR_ERR(ds1374->rtc);
381 return 0;
384 static int ds1374_remove(struct i2c_client *client)
386 struct ds1374 *ds1374 = i2c_get_clientdata(client);
388 if (client->irq > 0) {
389 mutex_lock(&ds1374->mutex);
390 ds1374->exiting = 1;
391 mutex_unlock(&ds1374->mutex);
393 devm_free_irq(&client->dev, client->irq, client);
394 cancel_work_sync(&ds1374->work);
397 return 0;
400 #ifdef CONFIG_PM_SLEEP
401 static int ds1374_suspend(struct device *dev)
403 struct i2c_client *client = to_i2c_client(dev);
405 if (client->irq >= 0 && device_may_wakeup(&client->dev))
406 enable_irq_wake(client->irq);
407 return 0;
410 static int ds1374_resume(struct device *dev)
412 struct i2c_client *client = to_i2c_client(dev);
414 if (client->irq >= 0 && device_may_wakeup(&client->dev))
415 disable_irq_wake(client->irq);
416 return 0;
418 #endif
420 static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
422 static struct i2c_driver ds1374_driver = {
423 .driver = {
424 .name = "rtc-ds1374",
425 .owner = THIS_MODULE,
426 .pm = &ds1374_pm,
428 .probe = ds1374_probe,
429 .remove = ds1374_remove,
430 .id_table = ds1374_id,
433 module_i2c_driver(ds1374_driver);
435 MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>");
436 MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
437 MODULE_LICENSE("GPL");