ASoC: Remove duplicate ADC/DAC widgets from wm_hubs.c
[linux/fpc-iii.git] / drivers / ata / sata_fsl.c
blob94eaa432c40a640a883546db805bf43e2ffb88ab
1 /*
2 * drivers/ata/sata_fsl.c
4 * Freescale 3.0Gbps SATA device driver
6 * Author: Ashish Kalra <ashish.kalra@freescale.com>
7 * Li Yang <leoli@freescale.com>
9 * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
22 #include <scsi/scsi_host.h>
23 #include <scsi/scsi_cmnd.h>
24 #include <linux/libata.h>
25 #include <asm/io.h>
26 #include <linux/of_platform.h>
28 /* Controller information */
29 enum {
30 SATA_FSL_QUEUE_DEPTH = 16,
31 SATA_FSL_MAX_PRD = 63,
32 SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1,
33 SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */
35 SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
36 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
37 ATA_FLAG_PMP | ATA_FLAG_NCQ),
39 SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
40 SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
41 SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE),
44 * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
45 * chained indirect PRDEs upto a max count of 63.
46 * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
47 * be setup as an indirect descriptor, pointing to it's next
48 * (contigious) PRDE. Though chained indirect PRDE arrays are
49 * supported,it will be more efficient to use a direct PRDT and
50 * a single chain/link to indirect PRDE array/PRDT.
53 SATA_FSL_CMD_DESC_CFIS_SZ = 32,
54 SATA_FSL_CMD_DESC_SFIS_SZ = 32,
55 SATA_FSL_CMD_DESC_ACMD_SZ = 16,
56 SATA_FSL_CMD_DESC_RSRVD = 16,
58 SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ +
59 SATA_FSL_CMD_DESC_SFIS_SZ +
60 SATA_FSL_CMD_DESC_ACMD_SZ +
61 SATA_FSL_CMD_DESC_RSRVD +
62 SATA_FSL_MAX_PRD * 16),
64 SATA_FSL_CMD_DESC_OFFSET_TO_PRDT =
65 (SATA_FSL_CMD_DESC_CFIS_SZ +
66 SATA_FSL_CMD_DESC_SFIS_SZ +
67 SATA_FSL_CMD_DESC_ACMD_SZ +
68 SATA_FSL_CMD_DESC_RSRVD),
70 SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS),
71 SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE +
72 SATA_FSL_CMD_DESC_AR_SZ),
75 * MPC8315 has two SATA controllers, SATA1 & SATA2
76 * (one port per controller)
77 * MPC837x has 2/4 controllers, one port per controller
80 SATA_FSL_MAX_PORTS = 1,
82 SATA_FSL_IRQ_FLAG = IRQF_SHARED,
86 * Host Controller command register set - per port
88 enum {
89 CQ = 0,
90 CA = 8,
91 CC = 0x10,
92 CE = 0x18,
93 DE = 0x20,
94 CHBA = 0x24,
95 HSTATUS = 0x28,
96 HCONTROL = 0x2C,
97 CQPMP = 0x30,
98 SIGNATURE = 0x34,
99 ICC = 0x38,
102 * Host Status Register (HStatus) bitdefs
104 ONLINE = (1 << 31),
105 GOING_OFFLINE = (1 << 30),
106 BIST_ERR = (1 << 29),
108 FATAL_ERR_HC_MASTER_ERR = (1 << 18),
109 FATAL_ERR_PARITY_ERR_TX = (1 << 17),
110 FATAL_ERR_PARITY_ERR_RX = (1 << 16),
111 FATAL_ERR_DATA_UNDERRUN = (1 << 13),
112 FATAL_ERR_DATA_OVERRUN = (1 << 12),
113 FATAL_ERR_CRC_ERR_TX = (1 << 11),
114 FATAL_ERR_CRC_ERR_RX = (1 << 10),
115 FATAL_ERR_FIFO_OVRFL_TX = (1 << 9),
116 FATAL_ERR_FIFO_OVRFL_RX = (1 << 8),
118 FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR |
119 FATAL_ERR_PARITY_ERR_TX |
120 FATAL_ERR_PARITY_ERR_RX |
121 FATAL_ERR_DATA_UNDERRUN |
122 FATAL_ERR_DATA_OVERRUN |
123 FATAL_ERR_CRC_ERR_TX |
124 FATAL_ERR_CRC_ERR_RX |
125 FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
127 INT_ON_FATAL_ERR = (1 << 5),
128 INT_ON_PHYRDY_CHG = (1 << 4),
130 INT_ON_SIGNATURE_UPDATE = (1 << 3),
131 INT_ON_SNOTIFY_UPDATE = (1 << 2),
132 INT_ON_SINGL_DEVICE_ERR = (1 << 1),
133 INT_ON_CMD_COMPLETE = 1,
135 INT_ON_ERROR = INT_ON_FATAL_ERR |
136 INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
139 * Host Control Register (HControl) bitdefs
141 HCONTROL_ONLINE_PHY_RST = (1 << 31),
142 HCONTROL_FORCE_OFFLINE = (1 << 30),
143 HCONTROL_PARITY_PROT_MOD = (1 << 14),
144 HCONTROL_DPATH_PARITY = (1 << 12),
145 HCONTROL_SNOOP_ENABLE = (1 << 10),
146 HCONTROL_PMP_ATTACHED = (1 << 9),
147 HCONTROL_COPYOUT_STATFIS = (1 << 8),
148 IE_ON_FATAL_ERR = (1 << 5),
149 IE_ON_PHYRDY_CHG = (1 << 4),
150 IE_ON_SIGNATURE_UPDATE = (1 << 3),
151 IE_ON_SNOTIFY_UPDATE = (1 << 2),
152 IE_ON_SINGL_DEVICE_ERR = (1 << 1),
153 IE_ON_CMD_COMPLETE = 1,
155 DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
156 IE_ON_SIGNATURE_UPDATE |
157 IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
159 EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
160 DATA_SNOOP_ENABLE = (1 << 22),
164 * SATA Superset Registers
166 enum {
167 SSTATUS = 0,
168 SERROR = 4,
169 SCONTROL = 8,
170 SNOTIFY = 0xC,
174 * Control Status Register Set
176 enum {
177 TRANSCFG = 0,
178 TRANSSTATUS = 4,
179 LINKCFG = 8,
180 LINKCFG1 = 0xC,
181 LINKCFG2 = 0x10,
182 LINKSTATUS = 0x14,
183 LINKSTATUS1 = 0x18,
184 PHYCTRLCFG = 0x1C,
185 COMMANDSTAT = 0x20,
188 /* PHY (link-layer) configuration control */
189 enum {
190 PHY_BIST_ENABLE = 0x01,
194 * Command Header Table entry, i.e, command slot
195 * 4 Dwords per command slot, command header size == 64 Dwords.
197 struct cmdhdr_tbl_entry {
198 u32 cda;
199 u32 prde_fis_len;
200 u32 ttl;
201 u32 desc_info;
205 * Description information bitdefs
207 enum {
208 CMD_DESC_RES = (1 << 11),
209 VENDOR_SPECIFIC_BIST = (1 << 10),
210 CMD_DESC_SNOOP_ENABLE = (1 << 9),
211 FPDMA_QUEUED_CMD = (1 << 8),
212 SRST_CMD = (1 << 7),
213 BIST = (1 << 6),
214 ATAPI_CMD = (1 << 5),
218 * Command Descriptor
220 struct command_desc {
221 u8 cfis[8 * 4];
222 u8 sfis[8 * 4];
223 u8 acmd[4 * 4];
224 u8 fill[4 * 4];
225 u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4];
226 u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4];
230 * Physical region table descriptor(PRD)
233 struct prde {
234 u32 dba;
235 u8 fill[2 * 4];
236 u32 ddc_and_ext;
240 * ata_port private data
241 * This is our per-port instance data.
243 struct sata_fsl_port_priv {
244 struct cmdhdr_tbl_entry *cmdslot;
245 dma_addr_t cmdslot_paddr;
246 struct command_desc *cmdentry;
247 dma_addr_t cmdentry_paddr;
251 * ata_port->host_set private data
253 struct sata_fsl_host_priv {
254 void __iomem *hcr_base;
255 void __iomem *ssr_base;
256 void __iomem *csr_base;
257 int irq;
260 static inline unsigned int sata_fsl_tag(unsigned int tag,
261 void __iomem *hcr_base)
263 /* We let libATA core do actual (queue) tag allocation */
265 /* all non NCQ/queued commands should have tag#0 */
266 if (ata_tag_internal(tag)) {
267 DPRINTK("mapping internal cmds to tag#0\n");
268 return 0;
271 if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) {
272 DPRINTK("tag %d invalid : out of range\n", tag);
273 return 0;
276 if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) {
277 DPRINTK("tag %d invalid : in use!!\n", tag);
278 return 0;
281 return tag;
284 static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp,
285 unsigned int tag, u32 desc_info,
286 u32 data_xfer_len, u8 num_prde,
287 u8 fis_len)
289 dma_addr_t cmd_descriptor_address;
291 cmd_descriptor_address = pp->cmdentry_paddr +
292 tag * SATA_FSL_CMD_DESC_SIZE;
294 /* NOTE: both data_xfer_len & fis_len are Dword counts */
296 pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address);
297 pp->cmdslot[tag].prde_fis_len =
298 cpu_to_le32((num_prde << 16) | (fis_len << 2));
299 pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
300 pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
302 VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
303 pp->cmdslot[tag].cda,
304 pp->cmdslot[tag].prde_fis_len,
305 pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info);
309 static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
310 u32 *ttl, dma_addr_t cmd_desc_paddr)
312 struct scatterlist *sg;
313 unsigned int num_prde = 0;
314 u32 ttl_dwords = 0;
317 * NOTE : direct & indirect prdt's are contigiously allocated
319 struct prde *prd = (struct prde *)&((struct command_desc *)
320 cmd_desc)->prdt;
322 struct prde *prd_ptr_to_indirect_ext = NULL;
323 unsigned indirect_ext_segment_sz = 0;
324 dma_addr_t indirect_ext_segment_paddr;
325 unsigned int si;
327 VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd);
329 indirect_ext_segment_paddr = cmd_desc_paddr +
330 SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
332 for_each_sg(qc->sg, sg, qc->n_elem, si) {
333 dma_addr_t sg_addr = sg_dma_address(sg);
334 u32 sg_len = sg_dma_len(sg);
336 VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
337 (unsigned long long)sg_addr, sg_len);
339 /* warn if each s/g element is not dword aligned */
340 if (sg_addr & 0x03)
341 ata_port_printk(qc->ap, KERN_ERR,
342 "s/g addr unaligned : 0x%llx\n",
343 (unsigned long long)sg_addr);
344 if (sg_len & 0x03)
345 ata_port_printk(qc->ap, KERN_ERR,
346 "s/g len unaligned : 0x%x\n", sg_len);
348 if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) &&
349 sg_next(sg) != NULL) {
350 VPRINTK("setting indirect prde\n");
351 prd_ptr_to_indirect_ext = prd;
352 prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
353 indirect_ext_segment_sz = 0;
354 ++prd;
355 ++num_prde;
358 ttl_dwords += sg_len;
359 prd->dba = cpu_to_le32(sg_addr);
360 prd->ddc_and_ext =
361 cpu_to_le32(DATA_SNOOP_ENABLE | (sg_len & ~0x03));
363 VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n",
364 ttl_dwords, prd->dba, prd->ddc_and_ext);
366 ++num_prde;
367 ++prd;
368 if (prd_ptr_to_indirect_ext)
369 indirect_ext_segment_sz += sg_len;
372 if (prd_ptr_to_indirect_ext) {
373 /* set indirect extension flag along with indirect ext. size */
374 prd_ptr_to_indirect_ext->ddc_and_ext =
375 cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG |
376 DATA_SNOOP_ENABLE |
377 (indirect_ext_segment_sz & ~0x03)));
380 *ttl = ttl_dwords;
381 return num_prde;
384 static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
386 struct ata_port *ap = qc->ap;
387 struct sata_fsl_port_priv *pp = ap->private_data;
388 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
389 void __iomem *hcr_base = host_priv->hcr_base;
390 unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
391 struct command_desc *cd;
392 u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
393 u32 num_prde = 0;
394 u32 ttl_dwords = 0;
395 dma_addr_t cd_paddr;
397 cd = (struct command_desc *)pp->cmdentry + tag;
398 cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
400 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
402 VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
403 cd->cfis[0], cd->cfis[1], cd->cfis[2]);
405 if (qc->tf.protocol == ATA_PROT_NCQ) {
406 VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n",
407 cd->cfis[3], cd->cfis[11]);
410 /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
411 if (ata_is_atapi(qc->tf.protocol)) {
412 desc_info |= ATAPI_CMD;
413 memset((void *)&cd->acmd, 0, 32);
414 memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
417 if (qc->flags & ATA_QCFLAG_DMAMAP)
418 num_prde = sata_fsl_fill_sg(qc, (void *)cd,
419 &ttl_dwords, cd_paddr);
421 if (qc->tf.protocol == ATA_PROT_NCQ)
422 desc_info |= FPDMA_QUEUED_CMD;
424 sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords,
425 num_prde, 5);
427 VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
428 desc_info, ttl_dwords, num_prde);
431 static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
433 struct ata_port *ap = qc->ap;
434 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
435 void __iomem *hcr_base = host_priv->hcr_base;
436 unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
438 VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n",
439 ioread32(CQ + hcr_base),
440 ioread32(CA + hcr_base),
441 ioread32(CE + hcr_base), ioread32(CC + hcr_base));
443 iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
445 /* Simply queue command to the controller/device */
446 iowrite32(1 << tag, CQ + hcr_base);
448 VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n",
449 tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base));
451 VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
452 ioread32(CE + hcr_base),
453 ioread32(DE + hcr_base),
454 ioread32(CC + hcr_base),
455 ioread32(COMMANDSTAT + host_priv->csr_base));
457 return 0;
460 static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
462 struct sata_fsl_port_priv *pp = qc->ap->private_data;
463 struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
464 void __iomem *hcr_base = host_priv->hcr_base;
465 unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
466 struct command_desc *cd;
468 cd = pp->cmdentry + tag;
470 ata_tf_from_fis(cd->sfis, &qc->result_tf);
471 return true;
474 static int sata_fsl_scr_write(struct ata_link *link,
475 unsigned int sc_reg_in, u32 val)
477 struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
478 void __iomem *ssr_base = host_priv->ssr_base;
479 unsigned int sc_reg;
481 switch (sc_reg_in) {
482 case SCR_STATUS:
483 case SCR_ERROR:
484 case SCR_CONTROL:
485 case SCR_ACTIVE:
486 sc_reg = sc_reg_in;
487 break;
488 default:
489 return -EINVAL;
492 VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
494 iowrite32(val, ssr_base + (sc_reg * 4));
495 return 0;
498 static int sata_fsl_scr_read(struct ata_link *link,
499 unsigned int sc_reg_in, u32 *val)
501 struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
502 void __iomem *ssr_base = host_priv->ssr_base;
503 unsigned int sc_reg;
505 switch (sc_reg_in) {
506 case SCR_STATUS:
507 case SCR_ERROR:
508 case SCR_CONTROL:
509 case SCR_ACTIVE:
510 sc_reg = sc_reg_in;
511 break;
512 default:
513 return -EINVAL;
516 VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
518 *val = ioread32(ssr_base + (sc_reg * 4));
519 return 0;
522 static void sata_fsl_freeze(struct ata_port *ap)
524 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
525 void __iomem *hcr_base = host_priv->hcr_base;
526 u32 temp;
528 VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n",
529 ioread32(CQ + hcr_base),
530 ioread32(CA + hcr_base),
531 ioread32(CE + hcr_base), ioread32(DE + hcr_base));
532 VPRINTK("CmdStat = 0x%x\n",
533 ioread32(host_priv->csr_base + COMMANDSTAT));
535 /* disable interrupts on the controller/port */
536 temp = ioread32(hcr_base + HCONTROL);
537 iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
539 VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n",
540 ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
543 static void sata_fsl_thaw(struct ata_port *ap)
545 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
546 void __iomem *hcr_base = host_priv->hcr_base;
547 u32 temp;
549 /* ack. any pending IRQs for this controller/port */
550 temp = ioread32(hcr_base + HSTATUS);
552 VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F));
554 if (temp & 0x3F)
555 iowrite32((temp & 0x3F), hcr_base + HSTATUS);
557 /* enable interrupts on the controller/port */
558 temp = ioread32(hcr_base + HCONTROL);
559 iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
561 VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n",
562 ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
565 static void sata_fsl_pmp_attach(struct ata_port *ap)
567 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
568 void __iomem *hcr_base = host_priv->hcr_base;
569 u32 temp;
571 temp = ioread32(hcr_base + HCONTROL);
572 iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
575 static void sata_fsl_pmp_detach(struct ata_port *ap)
577 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
578 void __iomem *hcr_base = host_priv->hcr_base;
579 u32 temp;
581 temp = ioread32(hcr_base + HCONTROL);
582 temp &= ~HCONTROL_PMP_ATTACHED;
583 iowrite32(temp, hcr_base + HCONTROL);
585 /* enable interrupts on the controller/port */
586 temp = ioread32(hcr_base + HCONTROL);
587 iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
591 static int sata_fsl_port_start(struct ata_port *ap)
593 struct device *dev = ap->host->dev;
594 struct sata_fsl_port_priv *pp;
595 void *mem;
596 dma_addr_t mem_dma;
597 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
598 void __iomem *hcr_base = host_priv->hcr_base;
599 u32 temp;
601 pp = kzalloc(sizeof(*pp), GFP_KERNEL);
602 if (!pp)
603 return -ENOMEM;
605 mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
606 GFP_KERNEL);
607 if (!mem) {
608 kfree(pp);
609 return -ENOMEM;
611 memset(mem, 0, SATA_FSL_PORT_PRIV_DMA_SZ);
613 pp->cmdslot = mem;
614 pp->cmdslot_paddr = mem_dma;
616 mem += SATA_FSL_CMD_SLOT_SIZE;
617 mem_dma += SATA_FSL_CMD_SLOT_SIZE;
619 pp->cmdentry = mem;
620 pp->cmdentry_paddr = mem_dma;
622 ap->private_data = pp;
624 VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n",
625 pp->cmdslot_paddr, pp->cmdentry_paddr);
627 /* Now, update the CHBA register in host controller cmd register set */
628 iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
631 * Now, we can bring the controller on-line & also initiate
632 * the COMINIT sequence, we simply return here and the boot-probing
633 * & device discovery process is re-initiated by libATA using a
634 * Softreset EH (dummy) session. Hence, boot probing and device
635 * discovey will be part of sata_fsl_softreset() callback.
638 temp = ioread32(hcr_base + HCONTROL);
639 iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL);
641 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
642 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
643 VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
645 #ifdef CONFIG_MPC8315_DS
647 * Workaround for 8315DS board 3gbps link-up issue,
648 * currently limit SATA port to GEN1 speed
650 sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
651 temp &= ~(0xF << 4);
652 temp |= (0x1 << 4);
653 sata_fsl_scr_write(&ap->link, SCR_CONTROL, temp);
655 sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
656 dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
657 temp);
658 #endif
660 return 0;
663 static void sata_fsl_port_stop(struct ata_port *ap)
665 struct device *dev = ap->host->dev;
666 struct sata_fsl_port_priv *pp = ap->private_data;
667 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
668 void __iomem *hcr_base = host_priv->hcr_base;
669 u32 temp;
672 * Force host controller to go off-line, aborting current operations
674 temp = ioread32(hcr_base + HCONTROL);
675 temp &= ~HCONTROL_ONLINE_PHY_RST;
676 temp |= HCONTROL_FORCE_OFFLINE;
677 iowrite32(temp, hcr_base + HCONTROL);
679 /* Poll for controller to go offline - should happen immediately */
680 ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1);
682 ap->private_data = NULL;
683 dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
684 pp->cmdslot, pp->cmdslot_paddr);
686 kfree(pp);
689 static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
691 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
692 void __iomem *hcr_base = host_priv->hcr_base;
693 struct ata_taskfile tf;
694 u32 temp;
696 temp = ioread32(hcr_base + SIGNATURE);
698 VPRINTK("raw sig = 0x%x\n", temp);
699 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
700 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
702 tf.lbah = (temp >> 24) & 0xff;
703 tf.lbam = (temp >> 16) & 0xff;
704 tf.lbal = (temp >> 8) & 0xff;
705 tf.nsect = temp & 0xff;
707 return ata_dev_classify(&tf);
710 static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline)
712 /* FIXME: Never skip softreset, sata_fsl_softreset() is
713 * combination of soft and hard resets. sata_fsl_softreset()
714 * needs to be splitted into soft and hard resets.
716 return 0;
719 static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
720 unsigned long deadline)
722 struct ata_port *ap = link->ap;
723 struct sata_fsl_port_priv *pp = ap->private_data;
724 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
725 void __iomem *hcr_base = host_priv->hcr_base;
726 int pmp = sata_srst_pmp(link);
727 u32 temp;
728 struct ata_taskfile tf;
729 u8 *cfis;
730 u32 Serror;
731 int i = 0;
732 unsigned long start_jiffies;
734 DPRINTK("in xx_softreset\n");
736 if (pmp != SATA_PMP_CTRL_PORT)
737 goto issue_srst;
739 try_offline_again:
741 * Force host controller to go off-line, aborting current operations
743 temp = ioread32(hcr_base + HCONTROL);
744 temp &= ~HCONTROL_ONLINE_PHY_RST;
745 iowrite32(temp, hcr_base + HCONTROL);
747 /* Poll for controller to go offline */
748 temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500);
750 if (temp & ONLINE) {
751 ata_port_printk(ap, KERN_ERR,
752 "Softreset failed, not off-lined %d\n", i);
755 * Try to offline controller atleast twice
757 i++;
758 if (i == 2)
759 goto err;
760 else
761 goto try_offline_again;
764 DPRINTK("softreset, controller off-lined\n");
765 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
766 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
769 * PHY reset should remain asserted for atleast 1ms
771 msleep(1);
774 * Now, bring the host controller online again, this can take time
775 * as PHY reset and communication establishment, 1st D2H FIS and
776 * device signature update is done, on safe side assume 500ms
777 * NOTE : Host online status may be indicated immediately!!
780 temp = ioread32(hcr_base + HCONTROL);
781 temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
782 temp |= HCONTROL_PMP_ATTACHED;
783 iowrite32(temp, hcr_base + HCONTROL);
785 temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
787 if (!(temp & ONLINE)) {
788 ata_port_printk(ap, KERN_ERR,
789 "Softreset failed, not on-lined\n");
790 goto err;
793 DPRINTK("softreset, controller off-lined & on-lined\n");
794 VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
795 VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
798 * First, wait for the PHYRDY change to occur before waiting for
799 * the signature, and also verify if SStatus indicates device
800 * presence
803 temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
804 if ((!(temp & 0x10)) || ata_link_offline(link)) {
805 ata_port_printk(ap, KERN_WARNING,
806 "No Device OR PHYRDY change,Hstatus = 0x%x\n",
807 ioread32(hcr_base + HSTATUS));
808 *class = ATA_DEV_NONE;
809 goto out;
813 * Wait for the first D2H from device,i.e,signature update notification
815 start_jiffies = jiffies;
816 temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10,
817 500, jiffies_to_msecs(deadline - start_jiffies));
819 if ((temp & 0xFF) != 0x18) {
820 ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
821 *class = ATA_DEV_NONE;
822 goto out;
823 } else {
824 ata_port_printk(ap, KERN_INFO,
825 "Signature Update detected @ %d msecs\n",
826 jiffies_to_msecs(jiffies - start_jiffies));
830 * Send a device reset (SRST) explicitly on command slot #0
831 * Check : will the command queue (reg) be cleared during offlining ??
832 * Also we will be online only if Phy commn. has been established
833 * and device presence has been detected, therefore if we have
834 * reached here, we can send a command to the target device
837 issue_srst:
838 DPRINTK("Sending SRST/device reset\n");
840 ata_tf_init(link->device, &tf);
841 cfis = (u8 *) &pp->cmdentry->cfis;
843 /* device reset/SRST is a control register update FIS, uses tag0 */
844 sata_fsl_setup_cmd_hdr_entry(pp, 0,
845 SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
847 tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
848 ata_tf_to_fis(&tf, pmp, 0, cfis);
850 DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
851 cfis[0], cfis[1], cfis[2], cfis[3]);
854 * Queue SRST command to the controller/device, ensure that no
855 * other commands are active on the controller/device
858 DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n",
859 ioread32(CQ + hcr_base),
860 ioread32(CA + hcr_base), ioread32(CC + hcr_base));
862 iowrite32(0xFFFF, CC + hcr_base);
863 iowrite32(1, CQ + hcr_base);
865 temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
866 if (temp & 0x1) {
867 ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n");
869 DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
870 ioread32(CQ + hcr_base),
871 ioread32(CA + hcr_base), ioread32(CC + hcr_base));
873 sata_fsl_scr_read(&ap->link, SCR_ERROR, &Serror);
875 DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
876 DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
877 DPRINTK("Serror = 0x%x\n", Serror);
878 goto err;
881 msleep(1);
884 * SATA device enters reset state after receving a Control register
885 * FIS with SRST bit asserted and it awaits another H2D Control reg.
886 * FIS with SRST bit cleared, then the device does internal diags &
887 * initialization, followed by indicating it's initialization status
888 * using ATA signature D2H register FIS to the host controller.
891 sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
892 0, 0, 5);
894 tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
895 ata_tf_to_fis(&tf, pmp, 0, cfis);
897 if (pmp != SATA_PMP_CTRL_PORT)
898 iowrite32(pmp, CQPMP + hcr_base);
899 iowrite32(1, CQ + hcr_base);
900 msleep(150); /* ?? */
903 * The above command would have signalled an interrupt on command
904 * complete, which needs special handling, by clearing the Nth
905 * command bit of the CCreg
907 iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
909 DPRINTK("SATA FSL : Now checking device signature\n");
911 *class = ATA_DEV_NONE;
913 /* Verify if SStatus indicates device presence */
914 if (ata_link_online(link)) {
916 * if we are here, device presence has been detected,
917 * 1st D2H FIS would have been received, but sfis in
918 * command desc. is not updated, but signature register
919 * would have been updated
922 *class = sata_fsl_dev_classify(ap);
924 DPRINTK("class = %d\n", *class);
925 VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC));
926 VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
929 out:
930 return 0;
932 err:
933 return -EIO;
936 static void sata_fsl_error_handler(struct ata_port *ap)
939 DPRINTK("in xx_error_handler\n");
940 sata_pmp_error_handler(ap);
944 static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
946 if (qc->flags & ATA_QCFLAG_FAILED)
947 qc->err_mask |= AC_ERR_OTHER;
949 if (qc->err_mask) {
950 /* make DMA engine forget about the failed command */
955 static void sata_fsl_error_intr(struct ata_port *ap)
957 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
958 void __iomem *hcr_base = host_priv->hcr_base;
959 u32 hstatus, dereg=0, cereg = 0, SError = 0;
960 unsigned int err_mask = 0, action = 0;
961 int freeze = 0, abort=0;
962 struct ata_link *link = NULL;
963 struct ata_queued_cmd *qc = NULL;
964 struct ata_eh_info *ehi;
966 hstatus = ioread32(hcr_base + HSTATUS);
967 cereg = ioread32(hcr_base + CE);
969 /* first, analyze and record host port events */
970 link = &ap->link;
971 ehi = &link->eh_info;
972 ata_ehi_clear_desc(ehi);
975 * Handle & Clear SError
978 sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
979 if (unlikely(SError & 0xFFFF0000)) {
980 sata_fsl_scr_write(&ap->link, SCR_ERROR, SError);
983 DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
984 hstatus, cereg, ioread32(hcr_base + DE), SError);
986 /* handle fatal errors */
987 if (hstatus & FATAL_ERROR_DECODE) {
988 ehi->err_mask |= AC_ERR_ATA_BUS;
989 ehi->action |= ATA_EH_SOFTRESET;
992 * Ignore serror in case of fatal errors as we always want
993 * to do a soft-reset of the FSL SATA controller. Analyzing
994 * serror may cause libata to schedule a hard-reset action,
995 * and hard-reset currently does not do controller
996 * offline/online, causing command timeouts and leads to an
997 * un-recoverable state, hence make libATA ignore
998 * autopsy in case of fatal errors.
1001 ehi->flags |= ATA_EHI_NO_AUTOPSY;
1003 freeze = 1;
1006 /* Handle PHYRDY change notification */
1007 if (hstatus & INT_ON_PHYRDY_CHG) {
1008 DPRINTK("SATA FSL: PHYRDY change indication\n");
1010 /* Setup a soft-reset EH action */
1011 ata_ehi_hotplugged(ehi);
1012 ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
1013 freeze = 1;
1016 /* handle single device errors */
1017 if (cereg) {
1019 * clear the command error, also clears queue to the device
1020 * in error, and we can (re)issue commands to this device.
1021 * When a device is in error all commands queued into the
1022 * host controller and at the device are considered aborted
1023 * and the queue for that device is stopped. Now, after
1024 * clearing the device error, we can issue commands to the
1025 * device to interrogate it to find the source of the error.
1027 abort = 1;
1029 DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
1030 ioread32(hcr_base + CE), ioread32(hcr_base + DE));
1032 /* find out the offending link and qc */
1033 if (ap->nr_pmp_links) {
1034 dereg = ioread32(hcr_base + DE);
1035 iowrite32(dereg, hcr_base + DE);
1036 iowrite32(cereg, hcr_base + CE);
1038 if (dereg < ap->nr_pmp_links) {
1039 link = &ap->pmp_link[dereg];
1040 ehi = &link->eh_info;
1041 qc = ata_qc_from_tag(ap, link->active_tag);
1043 * We should consider this as non fatal error,
1044 * and TF must be updated as done below.
1047 err_mask |= AC_ERR_DEV;
1049 } else {
1050 err_mask |= AC_ERR_HSM;
1051 action |= ATA_EH_HARDRESET;
1052 freeze = 1;
1054 } else {
1055 dereg = ioread32(hcr_base + DE);
1056 iowrite32(dereg, hcr_base + DE);
1057 iowrite32(cereg, hcr_base + CE);
1059 qc = ata_qc_from_tag(ap, link->active_tag);
1061 * We should consider this as non fatal error,
1062 * and TF must be updated as done below.
1064 err_mask |= AC_ERR_DEV;
1068 /* record error info */
1069 if (qc) {
1070 qc->err_mask |= err_mask;
1071 } else
1072 ehi->err_mask |= err_mask;
1074 ehi->action |= action;
1076 /* freeze or abort */
1077 if (freeze)
1078 ata_port_freeze(ap);
1079 else if (abort) {
1080 if (qc)
1081 ata_link_abort(qc->dev->link);
1082 else
1083 ata_port_abort(ap);
1087 static void sata_fsl_host_intr(struct ata_port *ap)
1089 struct sata_fsl_host_priv *host_priv = ap->host->private_data;
1090 void __iomem *hcr_base = host_priv->hcr_base;
1091 u32 hstatus, qc_active = 0;
1092 struct ata_queued_cmd *qc;
1093 u32 SError;
1095 hstatus = ioread32(hcr_base + HSTATUS);
1097 sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
1099 if (unlikely(SError & 0xFFFF0000)) {
1100 DPRINTK("serror @host_intr : 0x%x\n", SError);
1101 sata_fsl_error_intr(ap);
1105 if (unlikely(hstatus & INT_ON_ERROR)) {
1106 DPRINTK("error interrupt!!\n");
1107 sata_fsl_error_intr(ap);
1108 return;
1111 /* Read command completed register */
1112 qc_active = ioread32(hcr_base + CC);
1114 VPRINTK("Status of all queues :\n");
1115 VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
1116 qc_active,
1117 ioread32(hcr_base + CA),
1118 ioread32(hcr_base + CE),
1119 ioread32(hcr_base + CQ),
1120 ap->qc_active);
1122 if (qc_active & ap->qc_active) {
1123 int i;
1124 /* clear CC bit, this will also complete the interrupt */
1125 iowrite32(qc_active, hcr_base + CC);
1127 DPRINTK("Status of all queues :\n");
1128 DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
1129 qc_active, ioread32(hcr_base + CA),
1130 ioread32(hcr_base + CE));
1132 for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
1133 if (qc_active & (1 << i)) {
1134 qc = ata_qc_from_tag(ap, i);
1135 if (qc) {
1136 ata_qc_complete(qc);
1138 DPRINTK
1139 ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
1140 i, ioread32(hcr_base + CC),
1141 ioread32(hcr_base + CA));
1144 return;
1146 } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
1147 iowrite32(1, hcr_base + CC);
1148 qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
1150 DPRINTK("completing non-ncq cmd, CC=0x%x\n",
1151 ioread32(hcr_base + CC));
1153 if (qc) {
1154 ata_qc_complete(qc);
1156 } else {
1157 /* Spurious Interrupt!! */
1158 DPRINTK("spurious interrupt!!, CC = 0x%x\n",
1159 ioread32(hcr_base + CC));
1160 iowrite32(qc_active, hcr_base + CC);
1161 return;
1165 static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
1167 struct ata_host *host = dev_instance;
1168 struct sata_fsl_host_priv *host_priv = host->private_data;
1169 void __iomem *hcr_base = host_priv->hcr_base;
1170 u32 interrupt_enables;
1171 unsigned handled = 0;
1172 struct ata_port *ap;
1174 /* ack. any pending IRQs for this controller/port */
1175 interrupt_enables = ioread32(hcr_base + HSTATUS);
1176 interrupt_enables &= 0x3F;
1178 DPRINTK("interrupt status 0x%x\n", interrupt_enables);
1180 if (!interrupt_enables)
1181 return IRQ_NONE;
1183 spin_lock(&host->lock);
1185 /* Assuming one port per host controller */
1187 ap = host->ports[0];
1188 if (ap) {
1189 sata_fsl_host_intr(ap);
1190 } else {
1191 dev_printk(KERN_WARNING, host->dev,
1192 "interrupt on disabled port 0\n");
1195 iowrite32(interrupt_enables, hcr_base + HSTATUS);
1196 handled = 1;
1198 spin_unlock(&host->lock);
1200 return IRQ_RETVAL(handled);
1204 * Multiple ports are represented by multiple SATA controllers with
1205 * one port per controller
1207 static int sata_fsl_init_controller(struct ata_host *host)
1209 struct sata_fsl_host_priv *host_priv = host->private_data;
1210 void __iomem *hcr_base = host_priv->hcr_base;
1211 u32 temp;
1214 * NOTE : We cannot bring the controller online before setting
1215 * the CHBA, hence main controller initialization is done as
1216 * part of the port_start() callback
1219 /* ack. any pending IRQs for this controller/port */
1220 temp = ioread32(hcr_base + HSTATUS);
1221 if (temp & 0x3F)
1222 iowrite32((temp & 0x3F), hcr_base + HSTATUS);
1224 /* Keep interrupts disabled on the controller */
1225 temp = ioread32(hcr_base + HCONTROL);
1226 iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
1228 /* Disable interrupt coalescing control(icc), for the moment */
1229 DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC));
1230 iowrite32(0x01000000, hcr_base + ICC);
1232 /* clear error registers, SError is cleared by libATA */
1233 iowrite32(0x00000FFFF, hcr_base + CE);
1234 iowrite32(0x00000FFFF, hcr_base + DE);
1237 * host controller will be brought on-line, during xx_port_start()
1238 * callback, that should also initiate the OOB, COMINIT sequence
1241 DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
1242 DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
1244 return 0;
1248 * scsi mid-layer and libata interface structures
1250 static struct scsi_host_template sata_fsl_sht = {
1251 ATA_NCQ_SHT("sata_fsl"),
1252 .can_queue = SATA_FSL_QUEUE_DEPTH,
1253 .sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
1254 .dma_boundary = ATA_DMA_BOUNDARY,
1257 static struct ata_port_operations sata_fsl_ops = {
1258 .inherits = &sata_pmp_port_ops,
1260 .qc_prep = sata_fsl_qc_prep,
1261 .qc_issue = sata_fsl_qc_issue,
1262 .qc_fill_rtf = sata_fsl_qc_fill_rtf,
1264 .scr_read = sata_fsl_scr_read,
1265 .scr_write = sata_fsl_scr_write,
1267 .freeze = sata_fsl_freeze,
1268 .thaw = sata_fsl_thaw,
1269 .prereset = sata_fsl_prereset,
1270 .softreset = sata_fsl_softreset,
1271 .pmp_softreset = sata_fsl_softreset,
1272 .error_handler = sata_fsl_error_handler,
1273 .post_internal_cmd = sata_fsl_post_internal_cmd,
1275 .port_start = sata_fsl_port_start,
1276 .port_stop = sata_fsl_port_stop,
1278 .pmp_attach = sata_fsl_pmp_attach,
1279 .pmp_detach = sata_fsl_pmp_detach,
1282 static const struct ata_port_info sata_fsl_port_info[] = {
1284 .flags = SATA_FSL_HOST_FLAGS,
1285 .pio_mask = ATA_PIO4,
1286 .udma_mask = ATA_UDMA6,
1287 .port_ops = &sata_fsl_ops,
1291 static int sata_fsl_probe(struct of_device *ofdev,
1292 const struct of_device_id *match)
1294 int retval = -ENXIO;
1295 void __iomem *hcr_base = NULL;
1296 void __iomem *ssr_base = NULL;
1297 void __iomem *csr_base = NULL;
1298 struct sata_fsl_host_priv *host_priv = NULL;
1299 int irq;
1300 struct ata_host *host;
1302 struct ata_port_info pi = sata_fsl_port_info[0];
1303 const struct ata_port_info *ppi[] = { &pi, NULL };
1305 dev_printk(KERN_INFO, &ofdev->dev,
1306 "Sata FSL Platform/CSB Driver init\n");
1308 hcr_base = of_iomap(ofdev->node, 0);
1309 if (!hcr_base)
1310 goto error_exit_with_cleanup;
1312 ssr_base = hcr_base + 0x100;
1313 csr_base = hcr_base + 0x140;
1315 DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
1316 DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
1317 DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
1319 host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL);
1320 if (!host_priv)
1321 goto error_exit_with_cleanup;
1323 host_priv->hcr_base = hcr_base;
1324 host_priv->ssr_base = ssr_base;
1325 host_priv->csr_base = csr_base;
1327 irq = irq_of_parse_and_map(ofdev->node, 0);
1328 if (irq < 0) {
1329 dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
1330 goto error_exit_with_cleanup;
1332 host_priv->irq = irq;
1334 /* allocate host structure */
1335 host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
1337 /* host->iomap is not used currently */
1338 host->private_data = host_priv;
1340 /* initialize host controller */
1341 sata_fsl_init_controller(host);
1344 * Now, register with libATA core, this will also initiate the
1345 * device discovery process, invoking our port_start() handler &
1346 * error_handler() to execute a dummy Softreset EH session
1348 ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
1349 &sata_fsl_sht);
1351 dev_set_drvdata(&ofdev->dev, host);
1353 return 0;
1355 error_exit_with_cleanup:
1357 if (hcr_base)
1358 iounmap(hcr_base);
1359 if (host_priv)
1360 kfree(host_priv);
1362 return retval;
1365 static int sata_fsl_remove(struct of_device *ofdev)
1367 struct ata_host *host = dev_get_drvdata(&ofdev->dev);
1368 struct sata_fsl_host_priv *host_priv = host->private_data;
1370 ata_host_detach(host);
1372 dev_set_drvdata(&ofdev->dev, NULL);
1374 irq_dispose_mapping(host_priv->irq);
1375 iounmap(host_priv->hcr_base);
1376 kfree(host_priv);
1378 return 0;
1381 #ifdef CONFIG_PM
1382 static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
1384 struct ata_host *host = dev_get_drvdata(&op->dev);
1385 return ata_host_suspend(host, state);
1388 static int sata_fsl_resume(struct of_device *op)
1390 struct ata_host *host = dev_get_drvdata(&op->dev);
1391 struct sata_fsl_host_priv *host_priv = host->private_data;
1392 int ret;
1393 void __iomem *hcr_base = host_priv->hcr_base;
1394 struct ata_port *ap = host->ports[0];
1395 struct sata_fsl_port_priv *pp = ap->private_data;
1397 ret = sata_fsl_init_controller(host);
1398 if (ret) {
1399 dev_printk(KERN_ERR, &op->dev,
1400 "Error initialize hardware\n");
1401 return ret;
1404 /* Recovery the CHBA register in host controller cmd register set */
1405 iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
1407 ata_host_resume(host);
1408 return 0;
1410 #endif
1412 static struct of_device_id fsl_sata_match[] = {
1414 .compatible = "fsl,pq-sata",
1419 MODULE_DEVICE_TABLE(of, fsl_sata_match);
1421 static struct of_platform_driver fsl_sata_driver = {
1422 .name = "fsl-sata",
1423 .match_table = fsl_sata_match,
1424 .probe = sata_fsl_probe,
1425 .remove = sata_fsl_remove,
1426 #ifdef CONFIG_PM
1427 .suspend = sata_fsl_suspend,
1428 .resume = sata_fsl_resume,
1429 #endif
1432 static int __init sata_fsl_init(void)
1434 of_register_platform_driver(&fsl_sata_driver);
1435 return 0;
1438 static void __exit sata_fsl_exit(void)
1440 of_unregister_platform_driver(&fsl_sata_driver);
1443 MODULE_LICENSE("GPL");
1444 MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
1445 MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
1446 MODULE_VERSION("1.10");
1448 module_init(sata_fsl_init);
1449 module_exit(sata_fsl_exit);