x86: Make the vdso2c compiler use the host architecture headers
[linux/fpc-iii.git] / arch / arm / mach-ks8695 / regs-mem.h
blob55806bc68ce36c1d4dd7da09b7070a4aadd501c4
1 /*
2 * arch/arm/mach-ks8695/include/mach/regs-mem.h
4 * Copyright (C) 2006 Andrew Victor
6 * KS8695 - Memory Controller registers and bit definitions
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
13 #ifndef KS8695_MEM_H
14 #define KS8695_MEM_H
16 #define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
17 #define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
18 #define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
22 * Memory Controller Registers
24 #define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
25 #define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
26 #define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
27 #define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
28 #define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
29 #define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
30 #define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
31 #define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
32 #define KS8695_SDGCON (0x38) /* SDRAM General Control */
33 #define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
34 #define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
37 /* External I/O Access Control Registers */
38 #define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
39 #define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
40 #define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
41 #define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
42 #define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
43 #define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
45 /* ROM/SRAM/Flash Control Register */
46 #define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
47 #define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
48 #define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
49 #define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
50 #define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
51 #define PMC_NORMAL (0 << 0)
52 #define PMC_4WORD (1 << 0)
53 #define PMC_8WORD (2 << 0)
54 #define PMC_16WORD (3 << 0)
56 /* External I/O and ROM/SRAM/Flash General Register */
57 #define ERGCON_TMULT (3 << 28) /* Time Multiplier */
58 #define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
59 #define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
60 #define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
61 #define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
62 #define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
64 /* SDRAM Control Register */
65 #define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
66 #define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
67 #define SDCON_DBCAB (3 << 8) /* Column Address Bits */
68 #define SDCON_DBBNUM (1 << 3) /* Number of Banks */
69 #define SDCON_DBDBW (3 << 1) /* Data Bus Width */
71 /* SDRAM General Control Register */
72 #define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
73 #define SDGCON_SDCAS (3 << 0) /* CAS latency */
75 /* SDRAM Buffer Control Register */
76 #define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
77 #define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
78 #define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
79 #define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
80 #define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
81 #define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
82 #define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
83 #define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
85 /* SDRAM Refresh Timer Register */
86 #define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
89 #endif