x86: Make the vdso2c compiler use the host architecture headers
[linux/fpc-iii.git] / arch / arm / mach-omap2 / prminst44xx.c
blobd0b15dbafa2efa01b1ba06531d1e163d0e70f16c
1 /*
2 * OMAP4 PRM instance functions
4 * Copyright (C) 2009 Nokia Corporation
5 * Copyright (C) 2011 Texas Instruments, Inc.
6 * Paul Walmsley
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/kernel.h>
14 #include <linux/types.h>
15 #include <linux/errno.h>
16 #include <linux/err.h>
17 #include <linux/io.h>
19 #include "iomap.h"
20 #include "common.h"
21 #include "prcm-common.h"
22 #include "prm44xx.h"
23 #include "prm54xx.h"
24 #include "prm7xx.h"
25 #include "prminst44xx.h"
26 #include "prm-regbits-44xx.h"
27 #include "prcm44xx.h"
28 #include "prcm43xx.h"
29 #include "prcm_mpu44xx.h"
30 #include "soc.h"
32 static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
34 static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN;
36 /**
37 * omap_prm_base_init - Populates the prm partitions
39 * Populates the base addresses of the _prm_bases
40 * array used for read/write of prm module registers.
42 void omap_prm_base_init(void)
44 _prm_bases[OMAP4430_PRM_PARTITION] = prm_base;
45 _prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
48 s32 omap4_prmst_get_prm_dev_inst(void)
50 return prm_dev_inst;
53 void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
55 prm_dev_inst = dev_inst;
58 /* Read a register in a PRM instance */
59 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
61 BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
62 part == OMAP4430_INVALID_PRCM_PARTITION ||
63 !_prm_bases[part]);
64 return readl_relaxed(_prm_bases[part] + inst + idx);
67 /* Write into a register in a PRM instance */
68 void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
70 BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
71 part == OMAP4430_INVALID_PRCM_PARTITION ||
72 !_prm_bases[part]);
73 writel_relaxed(val, _prm_bases[part] + inst + idx);
76 /* Read-modify-write a register in PRM. Caller must lock */
77 u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
78 u16 idx)
80 u32 v;
82 v = omap4_prminst_read_inst_reg(part, inst, idx);
83 v &= ~mask;
84 v |= bits;
85 omap4_prminst_write_inst_reg(v, part, inst, idx);
87 return v;
90 /**
91 * omap4_prminst_is_hardreset_asserted - read the HW reset line state of
92 * submodules contained in the hwmod module
93 * @rstctrl_reg: RM_RSTCTRL register address for this module
94 * @shift: register bit shift corresponding to the reset line to check
96 * Returns 1 if the (sub)module hardreset line is currently asserted,
97 * 0 if the (sub)module hardreset line is not currently asserted, or
98 * -EINVAL upon parameter error.
100 int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
101 u16 rstctrl_offs)
103 u32 v;
105 v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs);
106 v &= 1 << shift;
107 v >>= shift;
109 return v;
113 * omap4_prminst_assert_hardreset - assert the HW reset line of a submodule
114 * @rstctrl_reg: RM_RSTCTRL register address for this module
115 * @shift: register bit shift corresponding to the reset line to assert
117 * Some IPs like dsp, ipu or iva contain processors that require an HW
118 * reset line to be asserted / deasserted in order to fully enable the
119 * IP. These modules may have multiple hard-reset lines that reset
120 * different 'submodules' inside the IP block. This function will
121 * place the submodule into reset. Returns 0 upon success or -EINVAL
122 * upon an argument error.
124 int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
125 u16 rstctrl_offs)
127 u32 mask = 1 << shift;
129 omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs);
131 return 0;
135 * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
136 * wait
137 * @shift: register bit shift corresponding to the reset line to deassert
138 * @st_shift: status bit offset corresponding to the reset line
139 * @part: PRM partition
140 * @inst: PRM instance offset
141 * @rstctrl_offs: reset register offset
142 * @rstst_offs: reset status register offset
144 * Some IPs like dsp, ipu or iva contain processors that require an HW
145 * reset line to be asserted / deasserted in order to fully enable the
146 * IP. These modules may have multiple hard-reset lines that reset
147 * different 'submodules' inside the IP block. This function will
148 * take the submodule out of reset and wait until the PRCM indicates
149 * that the reset has completed before returning. Returns 0 upon success or
150 * -EINVAL upon an argument error, -EEXIST if the submodule was already out
151 * of reset, or -EBUSY if the submodule did not exit reset promptly.
153 int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
154 u16 rstctrl_offs, u16 rstst_offs)
156 int c;
157 u32 mask = 1 << shift;
158 u32 st_mask = 1 << st_shift;
160 /* Check the current status to avoid de-asserting the line twice */
161 if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
162 rstctrl_offs) == 0)
163 return -EEXIST;
165 /* Clear the reset status by writing 1 to the status bit */
166 omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst,
167 rstst_offs);
168 /* de-assert the reset control line */
169 omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
170 /* wait the status to be set */
171 omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part,
172 inst, rstst_offs),
173 MAX_MODULE_HARDRESET_WAIT, c);
175 return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
179 void omap4_prminst_global_warm_sw_reset(void)
181 u32 v;
182 s32 inst = omap4_prmst_get_prm_dev_inst();
184 if (inst == PRM_INSTANCE_UNKNOWN)
185 return;
187 v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, inst,
188 OMAP4_PRM_RSTCTRL_OFFSET);
189 v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
190 omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
191 inst, OMAP4_PRM_RSTCTRL_OFFSET);
193 /* OCP barrier */
194 v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
195 inst, OMAP4_PRM_RSTCTRL_OFFSET);