staging: most: configfs: use strlcpy
[linux/fpc-iii.git] / drivers / firmware / raspberrypi.c
blobda26a584dca0693d26e8e13d8e994bb12465794a
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Defines interfaces for interacting wtih the Raspberry Pi firmware's
4 * property channel.
6 * Copyright © 2015 Broadcom
7 */
9 #include <linux/dma-mapping.h>
10 #include <linux/mailbox_client.h>
11 #include <linux/module.h>
12 #include <linux/of_platform.h>
13 #include <linux/platform_device.h>
14 #include <linux/slab.h>
15 #include <soc/bcm2835/raspberrypi-firmware.h>
17 #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf))
18 #define MBOX_CHAN(msg) ((msg) & 0xf)
19 #define MBOX_DATA28(msg) ((msg) & ~0xf)
20 #define MBOX_CHAN_PROPERTY 8
22 static struct platform_device *rpi_hwmon;
23 static struct platform_device *rpi_clk;
25 struct rpi_firmware {
26 struct mbox_client cl;
27 struct mbox_chan *chan; /* The property channel. */
28 struct completion c;
29 u32 enabled;
32 static DEFINE_MUTEX(transaction_lock);
34 static void response_callback(struct mbox_client *cl, void *msg)
36 struct rpi_firmware *fw = container_of(cl, struct rpi_firmware, cl);
37 complete(&fw->c);
41 * Sends a request to the firmware through the BCM2835 mailbox driver,
42 * and synchronously waits for the reply.
44 static int
45 rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data)
47 u32 message = MBOX_MSG(chan, data);
48 int ret;
50 WARN_ON(data & 0xf);
52 mutex_lock(&transaction_lock);
53 reinit_completion(&fw->c);
54 ret = mbox_send_message(fw->chan, &message);
55 if (ret >= 0) {
56 if (wait_for_completion_timeout(&fw->c, HZ)) {
57 ret = 0;
58 } else {
59 ret = -ETIMEDOUT;
60 WARN_ONCE(1, "Firmware transaction timeout");
62 } else {
63 dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret);
65 mutex_unlock(&transaction_lock);
67 return ret;
70 /**
71 * rpi_firmware_property_list - Submit firmware property list
72 * @fw: Pointer to firmware structure from rpi_firmware_get().
73 * @data: Buffer holding tags.
74 * @tag_size: Size of tags buffer.
76 * Submits a set of concatenated tags to the VPU firmware through the
77 * mailbox property interface.
79 * The buffer header and the ending tag are added by this function and
80 * don't need to be supplied, just the actual tags for your operation.
81 * See struct rpi_firmware_property_tag_header for the per-tag
82 * structure.
84 int rpi_firmware_property_list(struct rpi_firmware *fw,
85 void *data, size_t tag_size)
87 size_t size = tag_size + 12;
88 u32 *buf;
89 dma_addr_t bus_addr;
90 int ret;
92 /* Packets are processed a dword at a time. */
93 if (size & 3)
94 return -EINVAL;
96 buf = dma_alloc_coherent(fw->cl.dev, PAGE_ALIGN(size), &bus_addr,
97 GFP_ATOMIC);
98 if (!buf)
99 return -ENOMEM;
101 /* The firmware will error out without parsing in this case. */
102 WARN_ON(size >= 1024 * 1024);
104 buf[0] = size;
105 buf[1] = RPI_FIRMWARE_STATUS_REQUEST;
106 memcpy(&buf[2], data, tag_size);
107 buf[size / 4 - 1] = RPI_FIRMWARE_PROPERTY_END;
108 wmb();
110 ret = rpi_firmware_transaction(fw, MBOX_CHAN_PROPERTY, bus_addr);
112 rmb();
113 memcpy(data, &buf[2], tag_size);
114 if (ret == 0 && buf[1] != RPI_FIRMWARE_STATUS_SUCCESS) {
116 * The tag name here might not be the one causing the
117 * error, if there were multiple tags in the request.
118 * But single-tag is the most common, so go with it.
120 dev_err(fw->cl.dev, "Request 0x%08x returned status 0x%08x\n",
121 buf[2], buf[1]);
122 ret = -EINVAL;
125 dma_free_coherent(fw->cl.dev, PAGE_ALIGN(size), buf, bus_addr);
127 return ret;
129 EXPORT_SYMBOL_GPL(rpi_firmware_property_list);
132 * rpi_firmware_property - Submit single firmware property
133 * @fw: Pointer to firmware structure from rpi_firmware_get().
134 * @tag: One of enum_mbox_property_tag.
135 * @tag_data: Tag data buffer.
136 * @buf_size: Buffer size.
138 * Submits a single tag to the VPU firmware through the mailbox
139 * property interface.
141 * This is a convenience wrapper around
142 * rpi_firmware_property_list() to avoid some of the
143 * boilerplate in property calls.
145 int rpi_firmware_property(struct rpi_firmware *fw,
146 u32 tag, void *tag_data, size_t buf_size)
148 struct rpi_firmware_property_tag_header *header;
149 int ret;
151 /* Some mailboxes can use over 1k bytes. Rather than checking
152 * size and using stack or kmalloc depending on requirements,
153 * just use kmalloc. Mailboxes don't get called enough to worry
154 * too much about the time taken in the allocation.
156 void *data = kmalloc(sizeof(*header) + buf_size, GFP_KERNEL);
158 if (!data)
159 return -ENOMEM;
161 header = data;
162 header->tag = tag;
163 header->buf_size = buf_size;
164 header->req_resp_size = 0;
165 memcpy(data + sizeof(*header), tag_data, buf_size);
167 ret = rpi_firmware_property_list(fw, data, buf_size + sizeof(*header));
169 memcpy(tag_data, data + sizeof(*header), buf_size);
171 kfree(data);
173 return ret;
175 EXPORT_SYMBOL_GPL(rpi_firmware_property);
177 static void
178 rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
180 u32 packet;
181 int ret = rpi_firmware_property(fw,
182 RPI_FIRMWARE_GET_FIRMWARE_REVISION,
183 &packet, sizeof(packet));
185 if (ret == 0) {
186 struct tm tm;
188 time64_to_tm(packet, 0, &tm);
190 dev_info(fw->cl.dev,
191 "Attached to firmware from %04ld-%02d-%02d %02d:%02d\n",
192 tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
193 tm.tm_hour, tm.tm_min);
197 static void
198 rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
200 u32 packet;
201 int ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_THROTTLED,
202 &packet, sizeof(packet));
204 if (ret)
205 return;
207 rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon",
208 -1, NULL, 0);
211 static void rpi_register_clk_driver(struct device *dev)
213 rpi_clk = platform_device_register_data(dev, "raspberrypi-clk",
214 -1, NULL, 0);
217 static int rpi_firmware_probe(struct platform_device *pdev)
219 struct device *dev = &pdev->dev;
220 struct rpi_firmware *fw;
222 fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL);
223 if (!fw)
224 return -ENOMEM;
226 fw->cl.dev = dev;
227 fw->cl.rx_callback = response_callback;
228 fw->cl.tx_block = true;
230 fw->chan = mbox_request_channel(&fw->cl, 0);
231 if (IS_ERR(fw->chan)) {
232 int ret = PTR_ERR(fw->chan);
233 if (ret != -EPROBE_DEFER)
234 dev_err(dev, "Failed to get mbox channel: %d\n", ret);
235 return ret;
238 init_completion(&fw->c);
240 platform_set_drvdata(pdev, fw);
242 rpi_firmware_print_firmware_revision(fw);
243 rpi_register_hwmon_driver(dev, fw);
244 rpi_register_clk_driver(dev);
246 return 0;
249 static void rpi_firmware_shutdown(struct platform_device *pdev)
251 struct rpi_firmware *fw = platform_get_drvdata(pdev);
253 if (!fw)
254 return;
256 rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_REBOOT, NULL, 0);
259 static int rpi_firmware_remove(struct platform_device *pdev)
261 struct rpi_firmware *fw = platform_get_drvdata(pdev);
263 platform_device_unregister(rpi_hwmon);
264 rpi_hwmon = NULL;
265 platform_device_unregister(rpi_clk);
266 rpi_clk = NULL;
267 mbox_free_channel(fw->chan);
269 return 0;
273 * rpi_firmware_get - Get pointer to rpi_firmware structure.
274 * @firmware_node: Pointer to the firmware Device Tree node.
276 * Returns NULL is the firmware device is not ready.
278 struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
280 struct platform_device *pdev = of_find_device_by_node(firmware_node);
282 if (!pdev)
283 return NULL;
285 return platform_get_drvdata(pdev);
287 EXPORT_SYMBOL_GPL(rpi_firmware_get);
289 static const struct of_device_id rpi_firmware_of_match[] = {
290 { .compatible = "raspberrypi,bcm2835-firmware", },
293 MODULE_DEVICE_TABLE(of, rpi_firmware_of_match);
295 static struct platform_driver rpi_firmware_driver = {
296 .driver = {
297 .name = "raspberrypi-firmware",
298 .of_match_table = rpi_firmware_of_match,
300 .probe = rpi_firmware_probe,
301 .shutdown = rpi_firmware_shutdown,
302 .remove = rpi_firmware_remove,
304 module_platform_driver(rpi_firmware_driver);
306 MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
307 MODULE_DESCRIPTION("Raspberry Pi firmware driver");
308 MODULE_LICENSE("GPL v2");