iommu/of: Fix of_iommu_configure() for disabled IOMMUs

[linux/fpc-iii.git] / drivers / edac / i5400_edac.c

/*
 * Intel 5400 class Memory Controllers kernel module (Seaburg)
 *
 * This file may be distributed under the terms of the
 * GNU General Public License.
 *
 * Copyright (c) 2008 by:
 *       Ben Woodard <woodard@redhat.com>
 *       Mauro Carvalho Chehab
 *
 * Red Hat Inc. http://www.redhat.com
 *
 * Forked and adapted from the i5000_edac driver which was
 * written by Douglas Thompson Linux Networx <norsk5@xmission.com>
 *
 * This module is based on the following document:
 *
 * Intel 5400 Chipset Memory Controller Hub (MCH) - Datasheet
 *      http://developer.intel.com/design/chipsets/datashts/313070.htm
 *
 * This Memory Controller manages DDR2 FB-DIMMs. It has 2 branches, each with
 * 2 channels operating in lockstep no-mirror mode. Each channel can have up to
 * 4 dimm's, each with up to 8GB.
 *
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/edac.h>
#include <linux/mmzone.h>

#include "edac_module.h"

/*
 * Alter this version for the I5400 module when modifications are made
 */
#define I5400_REVISION    " Ver: 1.0.0"

#define EDAC_MOD_STR      "i5400_edac"

#define i5400_printk(level, fmt, arg...) \
        edac_printk(level, "i5400", fmt, ##arg)

#define i5400_mc_printk(mci, level, fmt, arg...) \
        edac_mc_chipset_printk(mci, level, "i5400", fmt, ##arg)

/* Limits for i5400 */
#define MAX_BRANCHES            2
#define CHANNELS_PER_BRANCH     2
#define DIMMS_PER_CHANNEL       4
#define MAX_CHANNELS            (MAX_BRANCHES * CHANNELS_PER_BRANCH)

/* Device 16,
 * Function 0: System Address
 * Function 1: Memory Branch Map, Control, Errors Register
 * Function 2: FSB Error Registers
 *
 * All 3 functions of Device 16 (0,1,2) share the SAME DID and
 * uses PCI_DEVICE_ID_INTEL_5400_ERR for device 16 (0,1,2),
 * PCI_DEVICE_ID_INTEL_5400_FBD0 and PCI_DEVICE_ID_INTEL_5400_FBD1
 * for device 21 (0,1).
 */

        /* OFFSETS for Function 0 */
#define         AMBASE                  0x48 /* AMB Mem Mapped Reg Region Base */
#define         MAXCH                   0x56 /* Max Channel Number */
#define         MAXDIMMPERCH            0x57 /* Max DIMM PER Channel Number */

        /* OFFSETS for Function 1 */
#define         TOLM                    0x6C
#define         REDMEMB                 0x7C
#define                 REC_ECC_LOCATOR_ODD(x)  ((x) & 0x3fe00) /* bits [17:9] indicate ODD, [8:0]  indicate EVEN */
#define         MIR0                    0x80
#define         MIR1                    0x84
#define         AMIR0                   0x8c
#define         AMIR1                   0x90

        /* Fatal error registers */
#define         FERR_FAT_FBD            0x98    /* also called as FERR_FAT_FB_DIMM at datasheet */
#define                 FERR_FAT_FBDCHAN (3<<28)        /* channel index where the highest-order error occurred */

#define         NERR_FAT_FBD            0x9c
#define         FERR_NF_FBD             0xa0    /* also called as FERR_NFAT_FB_DIMM at datasheet */

        /* Non-fatal error register */
#define         NERR_NF_FBD             0xa4

        /* Enable error mask */
#define         EMASK_FBD               0xa8

#define         ERR0_FBD                0xac
#define         ERR1_FBD                0xb0
#define         ERR2_FBD                0xb4
#define         MCERR_FBD               0xb8

        /* No OFFSETS for Device 16 Function 2 */

/*
 * Device 21,
 * Function 0: Memory Map Branch 0
 *
 * Device 22,
 * Function 0: Memory Map Branch 1
 */

        /* OFFSETS for Function 0 */
#define AMBPRESENT_0    0x64
#define AMBPRESENT_1    0x66
#define MTR0            0x80
#define MTR1            0x82
#define MTR2            0x84
#define MTR3            0x86

        /* OFFSETS for Function 1 */
#define NRECFGLOG               0x74
#define RECFGLOG                0x78
#define NRECMEMA                0xbe
#define NRECMEMB                0xc0
#define NRECFB_DIMMA            0xc4
#define NRECFB_DIMMB            0xc8
#define NRECFB_DIMMC            0xcc
#define NRECFB_DIMMD            0xd0
#define NRECFB_DIMME            0xd4
#define NRECFB_DIMMF            0xd8
#define REDMEMA                 0xdC
#define RECMEMA                 0xf0
#define RECMEMB                 0xf4
#define RECFB_DIMMA             0xf8
#define RECFB_DIMMB             0xec
#define RECFB_DIMMC             0xf0
#define RECFB_DIMMD             0xf4
#define RECFB_DIMME             0xf8
#define RECFB_DIMMF             0xfC

/*
 * Error indicator bits and masks
 * Error masks are according with Table 5-17 of i5400 datasheet
 */

enum error_mask {
        EMASK_M1  = 1<<0,  /* Memory Write error on non-redundant retry */
        EMASK_M2  = 1<<1,  /* Memory or FB-DIMM configuration CRC read error */
        EMASK_M3  = 1<<2,  /* Reserved */
        EMASK_M4  = 1<<3,  /* Uncorrectable Data ECC on Replay */
        EMASK_M5  = 1<<4,  /* Aliased Uncorrectable Non-Mirrored Demand Data ECC */
        EMASK_M6  = 1<<5,  /* Unsupported on i5400 */
        EMASK_M7  = 1<<6,  /* Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */
        EMASK_M8  = 1<<7,  /* Aliased Uncorrectable Patrol Data ECC */
        EMASK_M9  = 1<<8,  /* Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC */
        EMASK_M10 = 1<<9,  /* Unsupported on i5400 */
        EMASK_M11 = 1<<10, /* Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC  */
        EMASK_M12 = 1<<11, /* Non-Aliased Uncorrectable Patrol Data ECC */
        EMASK_M13 = 1<<12, /* Memory Write error on first attempt */
        EMASK_M14 = 1<<13, /* FB-DIMM Configuration Write error on first attempt */
        EMASK_M15 = 1<<14, /* Memory or FB-DIMM configuration CRC read error */
        EMASK_M16 = 1<<15, /* Channel Failed-Over Occurred */
        EMASK_M17 = 1<<16, /* Correctable Non-Mirrored Demand Data ECC */
        EMASK_M18 = 1<<17, /* Unsupported on i5400 */
        EMASK_M19 = 1<<18, /* Correctable Resilver- or Spare-Copy Data ECC */
        EMASK_M20 = 1<<19, /* Correctable Patrol Data ECC */
        EMASK_M21 = 1<<20, /* FB-DIMM Northbound parity error on FB-DIMM Sync Status */
        EMASK_M22 = 1<<21, /* SPD protocol Error */
        EMASK_M23 = 1<<22, /* Non-Redundant Fast Reset Timeout */
        EMASK_M24 = 1<<23, /* Refresh error */
        EMASK_M25 = 1<<24, /* Memory Write error on redundant retry */
        EMASK_M26 = 1<<25, /* Redundant Fast Reset Timeout */
        EMASK_M27 = 1<<26, /* Correctable Counter Threshold Exceeded */
        EMASK_M28 = 1<<27, /* DIMM-Spare Copy Completed */
        EMASK_M29 = 1<<28, /* DIMM-Isolation Completed */
};

/*
 * Names to translate bit error into something useful
 */
static const char *error_name[] = {
        [0]  = "Memory Write error on non-redundant retry",
        [1]  = "Memory or FB-DIMM configuration CRC read error",
        /* Reserved */
        [3]  = "Uncorrectable Data ECC on Replay",
        [4]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
        /* M6 Unsupported on i5400 */
        [6]  = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
        [7]  = "Aliased Uncorrectable Patrol Data ECC",
        [8]  = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC",
        /* M10 Unsupported on i5400 */
        [10] = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
        [11] = "Non-Aliased Uncorrectable Patrol Data ECC",
        [12] = "Memory Write error on first attempt",
        [13] = "FB-DIMM Configuration Write error on first attempt",
        [14] = "Memory or FB-DIMM configuration CRC read error",
        [15] = "Channel Failed-Over Occurred",
        [16] = "Correctable Non-Mirrored Demand Data ECC",
        /* M18 Unsupported on i5400 */
        [18] = "Correctable Resilver- or Spare-Copy Data ECC",
        [19] = "Correctable Patrol Data ECC",
        [20] = "FB-DIMM Northbound parity error on FB-DIMM Sync Status",
        [21] = "SPD protocol Error",
        [22] = "Non-Redundant Fast Reset Timeout",
        [23] = "Refresh error",
        [24] = "Memory Write error on redundant retry",
        [25] = "Redundant Fast Reset Timeout",
        [26] = "Correctable Counter Threshold Exceeded",
        [27] = "DIMM-Spare Copy Completed",
        [28] = "DIMM-Isolation Completed",
};

/* Fatal errors */
#define ERROR_FAT_MASK          (EMASK_M1 | \
                                 EMASK_M2 | \
                                 EMASK_M23)

/* Correctable errors */
#define ERROR_NF_CORRECTABLE    (EMASK_M27 | \
                                 EMASK_M20 | \
                                 EMASK_M19 | \
                                 EMASK_M18 | \
                                 EMASK_M17 | \
                                 EMASK_M16)
#define ERROR_NF_DIMM_SPARE     (EMASK_M29 | \
                                 EMASK_M28)
#define ERROR_NF_SPD_PROTOCOL   (EMASK_M22)
#define ERROR_NF_NORTH_CRC      (EMASK_M21)

/* Recoverable errors */
#define ERROR_NF_RECOVERABLE    (EMASK_M26 | \
                                 EMASK_M25 | \
                                 EMASK_M24 | \
                                 EMASK_M15 | \
                                 EMASK_M14 | \
                                 EMASK_M13 | \
                                 EMASK_M12 | \
                                 EMASK_M11 | \
                                 EMASK_M9  | \
                                 EMASK_M8  | \
                                 EMASK_M7  | \
                                 EMASK_M5)

/* uncorrectable errors */
#define ERROR_NF_UNCORRECTABLE  (EMASK_M4)

/* mask to all non-fatal errors */
#define ERROR_NF_MASK           (ERROR_NF_CORRECTABLE   | \
                                 ERROR_NF_UNCORRECTABLE | \
                                 ERROR_NF_RECOVERABLE   | \
                                 ERROR_NF_DIMM_SPARE    | \
                                 ERROR_NF_SPD_PROTOCOL  | \
                                 ERROR_NF_NORTH_CRC)

/*
 * Define error masks for the several registers
 */

/* Enable all fatal and non fatal errors */
#define ENABLE_EMASK_ALL        (ERROR_FAT_MASK | ERROR_NF_MASK)

/* mask for fatal error registers */
#define FERR_FAT_MASK ERROR_FAT_MASK

/* masks for non-fatal error register */
static inline int to_nf_mask(unsigned int mask)
{
        return (mask & EMASK_M29) | (mask >> 3);
};

static inline int from_nf_ferr(unsigned int mask)
{
        return (mask & EMASK_M29) |             /* Bit 28 */
               (mask & ((1 << 28) - 1) << 3);   /* Bits 0 to 27 */
};

#define FERR_NF_MASK            to_nf_mask(ERROR_NF_MASK)
#define FERR_NF_CORRECTABLE     to_nf_mask(ERROR_NF_CORRECTABLE)
#define FERR_NF_DIMM_SPARE      to_nf_mask(ERROR_NF_DIMM_SPARE)
#define FERR_NF_SPD_PROTOCOL    to_nf_mask(ERROR_NF_SPD_PROTOCOL)
#define FERR_NF_NORTH_CRC       to_nf_mask(ERROR_NF_NORTH_CRC)
#define FERR_NF_RECOVERABLE     to_nf_mask(ERROR_NF_RECOVERABLE)
#define FERR_NF_UNCORRECTABLE   to_nf_mask(ERROR_NF_UNCORRECTABLE)

/* Defines to extract the vaious fields from the
 *      MTRx - Memory Technology Registers
 */
#define MTR_DIMMS_PRESENT(mtr)          ((mtr) & (1 << 10))
#define MTR_DIMMS_ETHROTTLE(mtr)        ((mtr) & (1 << 9))
#define MTR_DRAM_WIDTH(mtr)             (((mtr) & (1 << 8)) ? 8 : 4)
#define MTR_DRAM_BANKS(mtr)             (((mtr) & (1 << 6)) ? 8 : 4)
#define MTR_DRAM_BANKS_ADDR_BITS(mtr)   ((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2)
#define MTR_DIMM_RANK(mtr)              (((mtr) >> 5) & 0x1)
#define MTR_DIMM_RANK_ADDR_BITS(mtr)    (MTR_DIMM_RANK(mtr) ? 2 : 1)
#define MTR_DIMM_ROWS(mtr)              (((mtr) >> 2) & 0x3)
#define MTR_DIMM_ROWS_ADDR_BITS(mtr)    (MTR_DIMM_ROWS(mtr) + 13)
#define MTR_DIMM_COLS(mtr)              ((mtr) & 0x3)
#define MTR_DIMM_COLS_ADDR_BITS(mtr)    (MTR_DIMM_COLS(mtr) + 10)

/* This applies to FERR_NF_FB-DIMM as well as FERR_FAT_FB-DIMM */
static inline int extract_fbdchan_indx(u32 x)
{
        return (x>>28) & 0x3;
}

/* Device name and register DID (Device ID) */
struct i5400_dev_info {
        const char *ctl_name;   /* name for this device */
        u16 fsb_mapping_errors; /* DID for the branchmap,control */
};

/* Table of devices attributes supported by this driver */
static const struct i5400_dev_info i5400_devs[] = {
        {
                .ctl_name = "I5400",
                .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_5400_ERR,
        },
};

struct i5400_dimm_info {
        int megabytes;          /* size, 0 means not present  */
};

/* driver private data structure */
struct i5400_pvt {
        struct pci_dev *system_address;         /* 16.0 */
        struct pci_dev *branchmap_werrors;      /* 16.1 */
        struct pci_dev *fsb_error_regs;         /* 16.2 */
        struct pci_dev *branch_0;               /* 21.0 */
        struct pci_dev *branch_1;               /* 22.0 */

        u16 tolm;                               /* top of low memory */
        union {
                u64 ambase;                             /* AMB BAR */
                struct {
                        u32 ambase_bottom;
                        u32 ambase_top;
                } u __packed;
        };

        u16 mir0, mir1;

        u16 b0_mtr[DIMMS_PER_CHANNEL];  /* Memory Technlogy Reg */
        u16 b0_ambpresent0;                     /* Branch 0, Channel 0 */
        u16 b0_ambpresent1;                     /* Brnach 0, Channel 1 */

        u16 b1_mtr[DIMMS_PER_CHANNEL];  /* Memory Technlogy Reg */
        u16 b1_ambpresent0;                     /* Branch 1, Channel 8 */
        u16 b1_ambpresent1;                     /* Branch 1, Channel 1 */

        /* DIMM information matrix, allocating architecture maximums */
        struct i5400_dimm_info dimm_info[DIMMS_PER_CHANNEL][MAX_CHANNELS];

        /* Actual values for this controller */
        int maxch;                              /* Max channels */
        int maxdimmperch;                       /* Max DIMMs per channel */
};

/* I5400 MCH error information retrieved from Hardware */
struct i5400_error_info {
        /* These registers are always read from the MC */
        u32 ferr_fat_fbd;       /* First Errors Fatal */
        u32 nerr_fat_fbd;       /* Next Errors Fatal */
        u32 ferr_nf_fbd;        /* First Errors Non-Fatal */
        u32 nerr_nf_fbd;        /* Next Errors Non-Fatal */

        /* These registers are input ONLY if there was a Recoverable Error */
        u32 redmemb;            /* Recoverable Mem Data Error log B */
        u16 recmema;            /* Recoverable Mem Error log A */
        u32 recmemb;            /* Recoverable Mem Error log B */

        /* These registers are input ONLY if there was a Non-Rec Error */
        u16 nrecmema;           /* Non-Recoverable Mem log A */
        u32 nrecmemb;           /* Non-Recoverable Mem log B */

};

/* note that nrec_rdwr changed from NRECMEMA to NRECMEMB between the 5000 and
   5400 better to use an inline function than a macro in this case */
static inline int nrec_bank(struct i5400_error_info *info)
{
        return ((info->nrecmema) >> 12) & 0x7;
}
static inline int nrec_rank(struct i5400_error_info *info)
{
        return ((info->nrecmema) >> 8) & 0xf;
}
static inline int nrec_buf_id(struct i5400_error_info *info)
{
        return ((info->nrecmema)) & 0xff;
}
static inline int nrec_rdwr(struct i5400_error_info *info)
{
        return (info->nrecmemb) >> 31;
}
/* This applies to both NREC and REC string so it can be used with nrec_rdwr
   and rec_rdwr */
static inline const char *rdwr_str(int rdwr)
{
        return rdwr ? "Write" : "Read";
}
static inline int nrec_cas(struct i5400_error_info *info)
{
        return ((info->nrecmemb) >> 16) & 0x1fff;
}
static inline int nrec_ras(struct i5400_error_info *info)
{
        return (info->nrecmemb) & 0xffff;
}
static inline int rec_bank(struct i5400_error_info *info)
{
        return ((info->recmema) >> 12) & 0x7;
}
static inline int rec_rank(struct i5400_error_info *info)
{
        return ((info->recmema) >> 8) & 0xf;
}
static inline int rec_rdwr(struct i5400_error_info *info)
{
        return (info->recmemb) >> 31;
}
static inline int rec_cas(struct i5400_error_info *info)
{
        return ((info->recmemb) >> 16) & 0x1fff;
}
static inline int rec_ras(struct i5400_error_info *info)
{
        return (info->recmemb) & 0xffff;
}

static struct edac_pci_ctl_info *i5400_pci;

/*
 *      i5400_get_error_info    Retrieve the hardware error information from
 *                              the hardware and cache it in the 'info'
 *                              structure
 */
static void i5400_get_error_info(struct mem_ctl_info *mci,
                                 struct i5400_error_info *info)
{
        struct i5400_pvt *pvt;
        u32 value;

        pvt = mci->pvt_info;

        /* read in the 1st FATAL error register */
        pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value);

        /* Mask only the bits that the doc says are valid
         */
        value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK);

        /* If there is an error, then read in the
           NEXT FATAL error register and the Memory Error Log Register A
         */
        if (value & FERR_FAT_MASK) {
                info->ferr_fat_fbd = value;

                /* harvest the various error data we need */
                pci_read_config_dword(pvt->branchmap_werrors,
                                NERR_FAT_FBD, &info->nerr_fat_fbd);
                pci_read_config_word(pvt->branchmap_werrors,
                                NRECMEMA, &info->nrecmema);
                pci_read_config_dword(pvt->branchmap_werrors,
                                NRECMEMB, &info->nrecmemb);

                /* Clear the error bits, by writing them back */
                pci_write_config_dword(pvt->branchmap_werrors,
                                FERR_FAT_FBD, value);
        } else {
                info->ferr_fat_fbd = 0;
                info->nerr_fat_fbd = 0;
                info->nrecmema = 0;
                info->nrecmemb = 0;
        }

        /* read in the 1st NON-FATAL error register */
        pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value);

        /* If there is an error, then read in the 1st NON-FATAL error
         * register as well */
        if (value & FERR_NF_MASK) {
                info->ferr_nf_fbd = value;

                /* harvest the various error data we need */
                pci_read_config_dword(pvt->branchmap_werrors,
                                NERR_NF_FBD, &info->nerr_nf_fbd);
                pci_read_config_word(pvt->branchmap_werrors,
                                RECMEMA, &info->recmema);
                pci_read_config_dword(pvt->branchmap_werrors,
                                RECMEMB, &info->recmemb);
                pci_read_config_dword(pvt->branchmap_werrors,
                                REDMEMB, &info->redmemb);

                /* Clear the error bits, by writing them back */
                pci_write_config_dword(pvt->branchmap_werrors,
                                FERR_NF_FBD, value);
        } else {
                info->ferr_nf_fbd = 0;
                info->nerr_nf_fbd = 0;
                info->recmema = 0;
                info->recmemb = 0;
                info->redmemb = 0;
        }
}

/*
 * i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci,
 *                                      struct i5400_error_info *info,
 *                                      int handle_errors);
 *
 *      handle the Intel FATAL and unrecoverable errors, if any
 */
static void i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci,
                                    struct i5400_error_info *info,
                                    unsigned long allErrors)
{
        char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80];
        int branch;
        int channel;
        int bank;
        int buf_id;
        int rank;
        int rdwr;
        int ras, cas;
        int errnum;
        char *type = NULL;
        enum hw_event_mc_err_type tp_event = HW_EVENT_ERR_UNCORRECTED;

        if (!allErrors)
                return;         /* if no error, return now */

        if (allErrors &  ERROR_FAT_MASK) {
                type = "FATAL";
                tp_event = HW_EVENT_ERR_FATAL;
        } else if (allErrors & FERR_NF_UNCORRECTABLE)
                type = "NON-FATAL uncorrected";
        else
                type = "NON-FATAL recoverable";

        /* ONLY ONE of the possible error bits will be set, as per the docs */

        branch = extract_fbdchan_indx(info->ferr_fat_fbd);
        channel = branch;

        /* Use the NON-Recoverable macros to extract data */
        bank = nrec_bank(info);
        rank = nrec_rank(info);
        buf_id = nrec_buf_id(info);
        rdwr = nrec_rdwr(info);
        ras = nrec_ras(info);
        cas = nrec_cas(info);

        edac_dbg(0, "\t\tDIMM= %d  Channels= %d,%d  (Branch= %d DRAM Bank= %d Buffer ID = %d rdwr= %s ras= %d cas= %d)\n",
                 rank, channel, channel + 1, branch >> 1, bank,
                 buf_id, rdwr_str(rdwr), ras, cas);

        /* Only 1 bit will be on */
        errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));

        /* Form out message */
        snprintf(msg, sizeof(msg),
                 "Bank=%d Buffer ID = %d RAS=%d CAS=%d Err=0x%lx (%s)",
                 bank, buf_id, ras, cas, allErrors, error_name[errnum]);

        edac_mc_handle_error(tp_event, mci, 1, 0, 0, 0,
                             branch >> 1, -1, rank,
                             rdwr ? "Write error" : "Read error",
                             msg);
}

/*
 * i5400_process_fatal_error_info(struct mem_ctl_info *mci,
 *                              struct i5400_error_info *info,
 *                              int handle_errors);
 *
 *      handle the Intel NON-FATAL errors, if any
 */
static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci,
                                        struct i5400_error_info *info)
{
        char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80];
        unsigned long allErrors;
        int branch;
        int channel;
        int bank;
        int rank;
        int rdwr;
        int ras, cas;
        int errnum;

        /* mask off the Error bits that are possible */
        allErrors = from_nf_ferr(info->ferr_nf_fbd & FERR_NF_MASK);
        if (!allErrors)
                return;         /* if no error, return now */

        /* ONLY ONE of the possible error bits will be set, as per the docs */

        if (allErrors & (ERROR_NF_UNCORRECTABLE | ERROR_NF_RECOVERABLE)) {
                i5400_proccess_non_recoverable_info(mci, info, allErrors);
                return;
        }

        /* Correctable errors */
        if (allErrors & ERROR_NF_CORRECTABLE) {
                edac_dbg(0, "\tCorrected bits= 0x%lx\n", allErrors);

                branch = extract_fbdchan_indx(info->ferr_nf_fbd);

                channel = 0;
                if (REC_ECC_LOCATOR_ODD(info->redmemb))
                        channel = 1;

                /* Convert channel to be based from zero, instead of
                 * from branch base of 0 */
                channel += branch;

                bank = rec_bank(info);
                rank = rec_rank(info);
                rdwr = rec_rdwr(info);
                ras = rec_ras(info);
                cas = rec_cas(info);

                /* Only 1 bit will be on */
                errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));

                edac_dbg(0, "\t\tDIMM= %d Channel= %d  (Branch %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
                         rank, channel, branch >> 1, bank,
                         rdwr_str(rdwr), ras, cas);

                /* Form out message */
                snprintf(msg, sizeof(msg),
                         "Corrected error (Branch=%d DRAM-Bank=%d RDWR=%s "
                         "RAS=%d CAS=%d, CE Err=0x%lx (%s))",
                         branch >> 1, bank, rdwr_str(rdwr), ras, cas,
                         allErrors, error_name[errnum]);

                edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
                                     branch >> 1, channel % 2, rank,
                                     rdwr ? "Write error" : "Read error",
                                     msg);

                return;
        }

        /* Miscellaneous errors */
        errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));

        branch = extract_fbdchan_indx(info->ferr_nf_fbd);

        i5400_mc_printk(mci, KERN_EMERG,
                        "Non-Fatal misc error (Branch=%d Err=%#lx (%s))",
                        branch >> 1, allErrors, error_name[errnum]);
}

/*
 *      i5400_process_error_info        Process the error info that is
 *      in the 'info' structure, previously retrieved from hardware
 */
static void i5400_process_error_info(struct mem_ctl_info *mci,
                                struct i5400_error_info *info)
{       u32 allErrors;

        /* First handle any fatal errors that occurred */
        allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK);
        i5400_proccess_non_recoverable_info(mci, info, allErrors);

        /* now handle any non-fatal errors that occurred */
        i5400_process_nonfatal_error_info(mci, info);
}

/*
 *      i5400_clear_error       Retrieve any error from the hardware
 *                              but do NOT process that error.
 *                              Used for 'clearing' out of previous errors
 *                              Called by the Core module.
 */
static void i5400_clear_error(struct mem_ctl_info *mci)
{
        struct i5400_error_info info;

        i5400_get_error_info(mci, &info);
}

/*
 *      i5400_check_error       Retrieve and process errors reported by the
 *                              hardware. Called by the Core module.
 */
static void i5400_check_error(struct mem_ctl_info *mci)
{
        struct i5400_error_info info;
        edac_dbg(4, "MC%d\n", mci->mc_idx);
        i5400_get_error_info(mci, &info);
        i5400_process_error_info(mci, &info);
}

/*
 *      i5400_put_devices       'put' all the devices that we have
 *                              reserved via 'get'
 */
static void i5400_put_devices(struct mem_ctl_info *mci)
{
        struct i5400_pvt *pvt;

        pvt = mci->pvt_info;

        /* Decrement usage count for devices */
        pci_dev_put(pvt->branch_1);
        pci_dev_put(pvt->branch_0);
        pci_dev_put(pvt->fsb_error_regs);
        pci_dev_put(pvt->branchmap_werrors);
}

/*
 *      i5400_get_devices       Find and perform 'get' operation on the MCH's
 *                      device/functions we want to reference for this driver
 *
 *                      Need to 'get' device 16 func 1 and func 2
 */
static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx)
{
        struct i5400_pvt *pvt;
        struct pci_dev *pdev;

        pvt = mci->pvt_info;
        pvt->branchmap_werrors = NULL;
        pvt->fsb_error_regs = NULL;
        pvt->branch_0 = NULL;
        pvt->branch_1 = NULL;

        /* Attempt to 'get' the MCH register we want */
        pdev = NULL;
        while (1) {
                pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
                                      PCI_DEVICE_ID_INTEL_5400_ERR, pdev);
                if (!pdev) {
                        /* End of list, leave */
                        i5400_printk(KERN_ERR,
                                "'system address,Process Bus' "
                                "device not found:"
                                "vendor 0x%x device 0x%x ERR func 1 "
                                "(broken BIOS?)\n",
                                PCI_VENDOR_ID_INTEL,
                                PCI_DEVICE_ID_INTEL_5400_ERR);
                        return -ENODEV;
                }

                /* Store device 16 func 1 */
                if (PCI_FUNC(pdev->devfn) == 1)
                        break;
        }
        pvt->branchmap_werrors = pdev;

        pdev = NULL;
        while (1) {
                pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
                                      PCI_DEVICE_ID_INTEL_5400_ERR, pdev);
                if (!pdev) {
                        /* End of list, leave */
                        i5400_printk(KERN_ERR,
                                "'system address,Process Bus' "
                                "device not found:"
                                "vendor 0x%x device 0x%x ERR func 2 "
                                "(broken BIOS?)\n",
                                PCI_VENDOR_ID_INTEL,
                                PCI_DEVICE_ID_INTEL_5400_ERR);

                        pci_dev_put(pvt->branchmap_werrors);
                        return -ENODEV;
                }

                /* Store device 16 func 2 */
                if (PCI_FUNC(pdev->devfn) == 2)
                        break;
        }
        pvt->fsb_error_regs = pdev;

        edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
                 pci_name(pvt->system_address),
                 pvt->system_address->vendor, pvt->system_address->device);
        edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
                 pci_name(pvt->branchmap_werrors),
                 pvt->branchmap_werrors->vendor,
                 pvt->branchmap_werrors->device);
        edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
                 pci_name(pvt->fsb_error_regs),
                 pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device);

        pvt->branch_0 = pci_get_device(PCI_VENDOR_ID_INTEL,
                                       PCI_DEVICE_ID_INTEL_5400_FBD0, NULL);
        if (!pvt->branch_0) {
                i5400_printk(KERN_ERR,
                        "MC: 'BRANCH 0' device not found:"
                        "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
                        PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD0);

                pci_dev_put(pvt->fsb_error_regs);
                pci_dev_put(pvt->branchmap_werrors);
                return -ENODEV;
        }

        /* If this device claims to have more than 2 channels then
         * fetch Branch 1's information
         */
        if (pvt->maxch < CHANNELS_PER_BRANCH)
                return 0;

        pvt->branch_1 = pci_get_device(PCI_VENDOR_ID_INTEL,
                                       PCI_DEVICE_ID_INTEL_5400_FBD1, NULL);
        if (!pvt->branch_1) {
                i5400_printk(KERN_ERR,
                        "MC: 'BRANCH 1' device not found:"
                        "vendor 0x%x device 0x%x Func 0 "
                        "(broken BIOS?)\n",
                        PCI_VENDOR_ID_INTEL,
                        PCI_DEVICE_ID_INTEL_5400_FBD1);

                pci_dev_put(pvt->branch_0);
                pci_dev_put(pvt->fsb_error_regs);
                pci_dev_put(pvt->branchmap_werrors);
                return -ENODEV;
        }

        return 0;
}

/*
 *      determine_amb_present
 *
 *              the information is contained in DIMMS_PER_CHANNEL different
 *              registers determining which of the DIMMS_PER_CHANNEL requires
 *              knowing which channel is in question
 *
 *      2 branches, each with 2 channels
 *              b0_ambpresent0 for channel '0'
 *              b0_ambpresent1 for channel '1'
 *              b1_ambpresent0 for channel '2'
 *              b1_ambpresent1 for channel '3'
 */
static int determine_amb_present_reg(struct i5400_pvt *pvt, int channel)
{
        int amb_present;

        if (channel < CHANNELS_PER_BRANCH) {
                if (channel & 0x1)
                        amb_present = pvt->b0_ambpresent1;
                else
                        amb_present = pvt->b0_ambpresent0;
        } else {
                if (channel & 0x1)
                        amb_present = pvt->b1_ambpresent1;
                else
                        amb_present = pvt->b1_ambpresent0;
        }

        return amb_present;
}

/*
 * determine_mtr(pvt, dimm, channel)
 *
 * return the proper MTR register as determine by the dimm and desired channel
 */
static int determine_mtr(struct i5400_pvt *pvt, int dimm, int channel)
{
        int mtr;
        int n;

        /* There is one MTR for each slot pair of FB-DIMMs,
           Each slot pair may be at branch 0 or branch 1.
         */
        n = dimm;

        if (n >= DIMMS_PER_CHANNEL) {
                edac_dbg(0, "ERROR: trying to access an invalid dimm: %d\n",
                         dimm);
                return 0;
        }

        if (channel < CHANNELS_PER_BRANCH)
                mtr = pvt->b0_mtr[n];
        else
                mtr = pvt->b1_mtr[n];

        return mtr;
}

/*
 */
static void decode_mtr(int slot_row, u16 mtr)
{
        int ans;

        ans = MTR_DIMMS_PRESENT(mtr);

        edac_dbg(2, "\tMTR%d=0x%x:  DIMMs are %sPresent\n",
                 slot_row, mtr, ans ? "" : "NOT ");
        if (!ans)
                return;

        edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));

        edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n",
                 MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");

        edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
        edac_dbg(2, "\t\tNUMRANK: %s\n",
                 MTR_DIMM_RANK(mtr) ? "double" : "single");
        edac_dbg(2, "\t\tNUMROW: %s\n",
                 MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" :
                 MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" :
                 MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" :
                 "65,536 - 16 rows");
        edac_dbg(2, "\t\tNUMCOL: %s\n",
                 MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" :
                 MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" :
                 MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" :
                 "reserved");
}

static void handle_channel(struct i5400_pvt *pvt, int dimm, int channel,
                        struct i5400_dimm_info *dinfo)
{
        int mtr;
        int amb_present_reg;
        int addrBits;

        mtr = determine_mtr(pvt, dimm, channel);
        if (MTR_DIMMS_PRESENT(mtr)) {
                amb_present_reg = determine_amb_present_reg(pvt, channel);

                /* Determine if there is a DIMM present in this DIMM slot */
                if (amb_present_reg & (1 << dimm)) {
                        /* Start with the number of bits for a Bank
                         * on the DRAM */
                        addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
                        /* Add thenumber of ROW bits */
                        addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
                        /* add the number of COLUMN bits */
                        addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
                        /* add the number of RANK bits */
                        addrBits += MTR_DIMM_RANK(mtr);

                        addrBits += 6;  /* add 64 bits per DIMM */
                        addrBits -= 20; /* divide by 2^^20 */
                        addrBits -= 3;  /* 8 bits per bytes */

                        dinfo->megabytes = 1 << addrBits;
                }
        }
}

/*
 *      calculate_dimm_size
 *
 *      also will output a DIMM matrix map, if debug is enabled, for viewing
 *      how the DIMMs are populated
 */
static void calculate_dimm_size(struct i5400_pvt *pvt)
{
        struct i5400_dimm_info *dinfo;
        int dimm, max_dimms;
        char *p, *mem_buffer;
        int space, n;
        int channel, branch;

        /* ================= Generate some debug output ================= */
        space = PAGE_SIZE;
        mem_buffer = p = kmalloc(space, GFP_KERNEL);
        if (p == NULL) {
                i5400_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n",
                        __FILE__, __func__);
                return;
        }

        /* Scan all the actual DIMMS
         * and calculate the information for each DIMM
         * Start with the highest dimm first, to display it first
         * and work toward the 0th dimm
         */
        max_dimms = pvt->maxdimmperch;
        for (dimm = max_dimms - 1; dimm >= 0; dimm--) {

                /* on an odd dimm, first output a 'boundary' marker,
                 * then reset the message buffer  */
                if (dimm & 0x1) {
                        n = snprintf(p, space, "---------------------------"
                                        "-------------------------------");
                        p += n;
                        space -= n;
                        edac_dbg(2, "%s\n", mem_buffer);
                        p = mem_buffer;
                        space = PAGE_SIZE;
                }
                n = snprintf(p, space, "dimm %2d    ", dimm);
                p += n;
                space -= n;

                for (channel = 0; channel < pvt->maxch; channel++) {
                        dinfo = &pvt->dimm_info[dimm][channel];
                        handle_channel(pvt, dimm, channel, dinfo);
                        n = snprintf(p, space, "%4d MB   | ", dinfo->megabytes);
                        p += n;
                        space -= n;
                }
                edac_dbg(2, "%s\n", mem_buffer);
                p = mem_buffer;
                space = PAGE_SIZE;
        }

        /* Output the last bottom 'boundary' marker */
        n = snprintf(p, space, "---------------------------"
                        "-------------------------------");
        p += n;
        space -= n;
        edac_dbg(2, "%s\n", mem_buffer);
        p = mem_buffer;
        space = PAGE_SIZE;

        /* now output the 'channel' labels */
        n = snprintf(p, space, "           ");
        p += n;
        space -= n;
        for (channel = 0; channel < pvt->maxch; channel++) {
                n = snprintf(p, space, "channel %d | ", channel);
                p += n;
                space -= n;
        }

        space -= n;
        edac_dbg(2, "%s\n", mem_buffer);
        p = mem_buffer;
        space = PAGE_SIZE;

        n = snprintf(p, space, "           ");
        p += n;
        for (branch = 0; branch < MAX_BRANCHES; branch++) {
                n = snprintf(p, space, "       branch %d       | ", branch);
                p += n;
                space -= n;
        }

        /* output the last message and free buffer */
        edac_dbg(2, "%s\n", mem_buffer);
        kfree(mem_buffer);
}

/*
 *      i5400_get_mc_regs       read in the necessary registers and
 *                              cache locally
 *
 *                      Fills in the private data members
 */
static void i5400_get_mc_regs(struct mem_ctl_info *mci)
{
        struct i5400_pvt *pvt;
        u32 actual_tolm;
        u16 limit;
        int slot_row;
        int maxch;
        int maxdimmperch;
        int way0, way1;

        pvt = mci->pvt_info;

        pci_read_config_dword(pvt->system_address, AMBASE,
                        &pvt->u.ambase_bottom);
        pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32),
                        &pvt->u.ambase_top);

        maxdimmperch = pvt->maxdimmperch;
        maxch = pvt->maxch;

        edac_dbg(2, "AMBASE= 0x%lx  MAXCH= %d  MAX-DIMM-Per-CH= %d\n",
                 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch);

        /* Get the Branch Map regs */
        pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm);
        pvt->tolm >>= 12;
        edac_dbg(2, "\nTOLM (number of 256M regions) =%u (0x%x)\n",
                 pvt->tolm, pvt->tolm);

        actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28));
        edac_dbg(2, "Actual TOLM byte addr=%u.%03u GB (0x%x)\n",
                 actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28);

        pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0);
        pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1);

        /* Get the MIR[0-1] regs */
        limit = (pvt->mir0 >> 4) & 0x0fff;
        way0 = pvt->mir0 & 0x1;
        way1 = pvt->mir0 & 0x2;
        edac_dbg(2, "MIR0: limit= 0x%x  WAY1= %u  WAY0= %x\n",
                 limit, way1, way0);
        limit = (pvt->mir1 >> 4) & 0xfff;
        way0 = pvt->mir1 & 0x1;
        way1 = pvt->mir1 & 0x2;
        edac_dbg(2, "MIR1: limit= 0x%x  WAY1= %u  WAY0= %x\n",
                 limit, way1, way0);

        /* Get the set of MTR[0-3] regs by each branch */
        for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) {
                int where = MTR0 + (slot_row * sizeof(u16));

                /* Branch 0 set of MTR registers */
                pci_read_config_word(pvt->branch_0, where,
                                &pvt->b0_mtr[slot_row]);

                edac_dbg(2, "MTR%d where=0x%x B0 value=0x%x\n",
                         slot_row, where, pvt->b0_mtr[slot_row]);

                if (pvt->maxch < CHANNELS_PER_BRANCH) {
                        pvt->b1_mtr[slot_row] = 0;
                        continue;
                }

                /* Branch 1 set of MTR registers */
                pci_read_config_word(pvt->branch_1, where,
                                &pvt->b1_mtr[slot_row]);
                edac_dbg(2, "MTR%d where=0x%x B1 value=0x%x\n",
                         slot_row, where, pvt->b1_mtr[slot_row]);
        }

        /* Read and dump branch 0's MTRs */
        edac_dbg(2, "Memory Technology Registers:\n");
        edac_dbg(2, "   Branch 0:\n");
        for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++)
                decode_mtr(slot_row, pvt->b0_mtr[slot_row]);

        pci_read_config_word(pvt->branch_0, AMBPRESENT_0,
                        &pvt->b0_ambpresent0);
        edac_dbg(2, "\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0);
        pci_read_config_word(pvt->branch_0, AMBPRESENT_1,
                        &pvt->b0_ambpresent1);
        edac_dbg(2, "\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1);

        /* Only if we have 2 branchs (4 channels) */
        if (pvt->maxch < CHANNELS_PER_BRANCH) {
                pvt->b1_ambpresent0 = 0;
                pvt->b1_ambpresent1 = 0;
        } else {
                /* Read and dump  branch 1's MTRs */
                edac_dbg(2, "   Branch 1:\n");
                for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++)
                        decode_mtr(slot_row, pvt->b1_mtr[slot_row]);

                pci_read_config_word(pvt->branch_1, AMBPRESENT_0,
                                &pvt->b1_ambpresent0);
                edac_dbg(2, "\t\tAMB-Branch 1-present0 0x%x:\n",
                         pvt->b1_ambpresent0);
                pci_read_config_word(pvt->branch_1, AMBPRESENT_1,
                                &pvt->b1_ambpresent1);
                edac_dbg(2, "\t\tAMB-Branch 1-present1 0x%x:\n",
                         pvt->b1_ambpresent1);
        }

        /* Go and determine the size of each DIMM and place in an
         * orderly matrix */
        calculate_dimm_size(pvt);
}

/*
 *      i5400_init_dimms        Initialize the 'dimms' table within
 *                              the mci control structure with the
 *                              addressing of memory.
 *
 *      return:
 *              0       success
 *              1       no actual memory found on this MC
 */
static int i5400_init_dimms(struct mem_ctl_info *mci)
{
        struct i5400_pvt *pvt;
        struct dimm_info *dimm;
        int ndimms, channel_count;
        int max_dimms;
        int mtr;
        int size_mb;
        int  channel, slot;

        pvt = mci->pvt_info;

        channel_count = pvt->maxch;
        max_dimms = pvt->maxdimmperch;

        ndimms = 0;

        /*
         * FIXME: remove  pvt->dimm_info[slot][channel] and use the 3
         * layers here.
         */
        for (channel = 0; channel < mci->layers[0].size * mci->layers[1].size;
             channel++) {
                for (slot = 0; slot < mci->layers[2].size; slot++) {
                        mtr = determine_mtr(pvt, slot, channel);

                        /* if no DIMMS on this slot, continue */
                        if (!MTR_DIMMS_PRESENT(mtr))
                                continue;

                        dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
                                       channel / 2, channel % 2, slot);

                        size_mb =  pvt->dimm_info[slot][channel].megabytes;

                        edac_dbg(2, "dimm (branch %d channel %d slot %d): %d.%03d GB\n",
                                 channel / 2, channel % 2, slot,
                                 size_mb / 1000, size_mb % 1000);

                        dimm->nr_pages = size_mb << 8;
                        dimm->grain = 8;
                        dimm->dtype = MTR_DRAM_WIDTH(mtr) == 8 ?
                                      DEV_X8 : DEV_X4;
                        dimm->mtype = MEM_FB_DDR2;
                        /*
                         * The eccc mechanism is SDDC (aka SECC), with
                         * is similar to Chipkill.
                         */
                        dimm->edac_mode = MTR_DRAM_WIDTH(mtr) == 8 ?
                                          EDAC_S8ECD8ED : EDAC_S4ECD4ED;
                        ndimms++;
                }
        }

        /*
         * When just one memory is provided, it should be at location (0,0,0).
         * With such single-DIMM mode, the SDCC algorithm degrades to SECDEC+.
         */
        if (ndimms == 1)
                mci->dimms[0]->edac_mode = EDAC_SECDED;

        return (ndimms == 0);
}

/*
 *      i5400_enable_error_reporting
 *                      Turn on the memory reporting features of the hardware
 */
static void i5400_enable_error_reporting(struct mem_ctl_info *mci)
{
        struct i5400_pvt *pvt;
        u32 fbd_error_mask;

        pvt = mci->pvt_info;

        /* Read the FBD Error Mask Register */
        pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD,
                        &fbd_error_mask);

        /* Enable with a '0' */
        fbd_error_mask &= ~(ENABLE_EMASK_ALL);

        pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD,
                        fbd_error_mask);
}

/*
 *      i5400_probe1    Probe for ONE instance of device to see if it is
 *                      present.
 *      return:
 *              0 for FOUND a device
 *              < 0 for error code
 */
static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
{
        struct mem_ctl_info *mci;
        struct i5400_pvt *pvt;
        struct edac_mc_layer layers[3];

        if (dev_idx >= ARRAY_SIZE(i5400_devs))
                return -EINVAL;

        edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n",
                 pdev->bus->number,
                 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));

        /* We only are looking for func 0 of the set */
        if (PCI_FUNC(pdev->devfn) != 0)
                return -ENODEV;

        /*
         * allocate a new MC control structure
         *
         * This drivers uses the DIMM slot as "csrow" and the rest as "channel".
         */
        layers[0].type = EDAC_MC_LAYER_BRANCH;
        layers[0].size = MAX_BRANCHES;
        layers[0].is_virt_csrow = false;
        layers[1].type = EDAC_MC_LAYER_CHANNEL;
        layers[1].size = CHANNELS_PER_BRANCH;
        layers[1].is_virt_csrow = false;
        layers[2].type = EDAC_MC_LAYER_SLOT;
        layers[2].size = DIMMS_PER_CHANNEL;
        layers[2].is_virt_csrow = true;
        mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
        if (mci == NULL)
                return -ENOMEM;

        edac_dbg(0, "MC: mci = %p\n", mci);

        mci->pdev = &pdev->dev; /* record ptr  to the generic device */

        pvt = mci->pvt_info;
        pvt->system_address = pdev;     /* Record this device in our private */
        pvt->maxch = MAX_CHANNELS;
        pvt->maxdimmperch = DIMMS_PER_CHANNEL;

        /* 'get' the pci devices we want to reserve for our use */
        if (i5400_get_devices(mci, dev_idx))
                goto fail0;

        /* Time to get serious */
        i5400_get_mc_regs(mci); /* retrieve the hardware registers */

        mci->mc_idx = 0;
        mci->mtype_cap = MEM_FLAG_FB_DDR2;
        mci->edac_ctl_cap = EDAC_FLAG_NONE;
        mci->edac_cap = EDAC_FLAG_NONE;
        mci->mod_name = "i5400_edac.c";
        mci->mod_ver = I5400_REVISION;
        mci->ctl_name = i5400_devs[dev_idx].ctl_name;
        mci->dev_name = pci_name(pdev);
        mci->ctl_page_to_phys = NULL;

        /* Set the function pointer to an actual operation function */
        mci->edac_check = i5400_check_error;

        /* initialize the MC control structure 'dimms' table
         * with the mapping and control information */
        if (i5400_init_dimms(mci)) {
                edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i5400_init_dimms() returned nonzero value\n");
                mci->edac_cap = EDAC_FLAG_NONE; /* no dimms found */
        } else {
                edac_dbg(1, "MC: Enable error reporting now\n");
                i5400_enable_error_reporting(mci);
        }

        /* add this new MC control structure to EDAC's list of MCs */
        if (edac_mc_add_mc(mci)) {
                edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
                /* FIXME: perhaps some code should go here that disables error
                 * reporting if we just enabled it
                 */
                goto fail1;
        }

        i5400_clear_error(mci);

        /* allocating generic PCI control info */
        i5400_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
        if (!i5400_pci) {
                printk(KERN_WARNING
                        "%s(): Unable to create PCI control\n",
                        __func__);
                printk(KERN_WARNING
                        "%s(): PCI error report via EDAC not setup\n",
                        __func__);
        }

        return 0;

        /* Error exit unwinding stack */
fail1:

        i5400_put_devices(mci);

fail0:
        edac_mc_free(mci);
        return -ENODEV;
}

/*
 *      i5400_init_one  constructor for one instance of device
 *
 *      returns:
 *              negative on error
 *              count (>= 0)
 */
static int i5400_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
        int rc;

        edac_dbg(0, "MC:\n");

        /* wake up device */
        rc = pci_enable_device(pdev);
        if (rc)
                return rc;

        /* now probe and enable the device */
        return i5400_probe1(pdev, id->driver_data);
}

/*
 *      i5400_remove_one        destructor for one instance of device
 *
 */
static void i5400_remove_one(struct pci_dev *pdev)
{
        struct mem_ctl_info *mci;

        edac_dbg(0, "\n");

        if (i5400_pci)
                edac_pci_release_generic_ctl(i5400_pci);

        mci = edac_mc_del_mc(&pdev->dev);
        if (!mci)
                return;

        /* retrieve references to resources, and free those resources */
        i5400_put_devices(mci);

        pci_disable_device(pdev);

        edac_mc_free(mci);
}

/*
 *      pci_device_id   table for which devices we are looking for
 *
 *      The "E500P" device is the first device supported.
 */
static const struct pci_device_id i5400_pci_tbl[] = {
        {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR)},
        {0,}                    /* 0 terminated list. */
};

MODULE_DEVICE_TABLE(pci, i5400_pci_tbl);

/*
 *      i5400_driver    pci_driver structure for this module
 *
 */
static struct pci_driver i5400_driver = {
        .name = "i5400_edac",
        .probe = i5400_init_one,
        .remove = i5400_remove_one,
        .id_table = i5400_pci_tbl,
};

/*
 *      i5400_init              Module entry function
 *                      Try to initialize this module for its devices
 */
static int __init i5400_init(void)
{
        int pci_rc;

        edac_dbg(2, "MC:\n");

        /* Ensure that the OPSTATE is set correctly for POLL or NMI */
        opstate_init();

        pci_rc = pci_register_driver(&i5400_driver);

        return (pci_rc < 0) ? pci_rc : 0;
}

/*
 *      i5400_exit()    Module exit function
 *                      Unregister the driver
 */
static void __exit i5400_exit(void)
{
        edac_dbg(2, "MC:\n");
        pci_unregister_driver(&i5400_driver);
}

module_init(i5400_init);
module_exit(i5400_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Woodard <woodard@redhat.com>");
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
MODULE_DESCRIPTION("MC Driver for Intel I5400 memory controllers - "
                   I5400_REVISION);

module_param(edac_op_state, int, 0444);
MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");