Documentation/devicetree/bindings/ata/ahci-st.txt

   1 STMicroelectronics STi SATA controller
   2
   3 This binding describes a SATA device.
   4
   5 Required properties:
   6  - compatible      : Must be "st,ahci"
   7  - reg             : Physical base addresses and length of register sets
   8  - interrupts      : Interrupt associated with the SATA device
   9  - interrupt-names :   Associated name must be; "hostc"
  10  - clocks          : The phandle for the clock
  11  - clock-names     :   Associated name must be; "ahci_clk"
  12  - phys            : The phandle for the PHY port
  13  - phy-names       :   Associated name must be; "ahci_phy"
  14
  15 Optional properties:
  16  - resets          : The power-down, soft-reset and power-reset lines of SATA IP
  17  - reset-names     :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
  18
  19 Example:
  20
  21         /* Example for stih416 */
  22         sata0: sata@fe380000 {
  23                 compatible      = "st,ahci";
  24                 reg             = <0xfe380000 0x1000>;
  25                 interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
  26                 interrupt-names = "hostc";
  27                 phys            = <&phy_port0 PHY_TYPE_SATA>;
  28                 phy-names       = "ahci_phy";
  29                 resets          = <&powerdown STIH416_SATA0_POWERDOWN>,
  30                                   <&softreset STIH416_SATA0_SOFTRESET>;
  31                 reset-names     = "pwr-dwn", "sw-rst";
  32                 clocks          = <&clk_s_a0_ls CLK_ICN_REG>;
  33                 clock-names     = "ahci_clk";
  34         };
  35
  36         /* Example for stih407 family silicon */
  37         sata0: sata@9b20000 {
  38                 compatible      = "st,ahci";
  39                 reg             = <0x9b20000 0x1000>;
  40                 interrupts      = <GIC_SPI 159 IRQ_TYPE_NONE>;
  41                 interrupt-names = "hostc";
  42                 phys            = <&phy_port0 PHY_TYPE_SATA>;
  43                 phy-names       = "ahci_phy";
  44                 resets          = <&powerdown STIH407_SATA0_POWERDOWN>,
  45                                   <&softreset STIH407_SATA0_SOFTRESET>,
  46                                   <&softreset STIH407_SATA0_PWR_SOFTRESET>;
  47                 reset-names     = "pwr-dwn", "sw-rst", "pwr-rst";
  48                 clocks          = <&clk_s_c0_flexgen CLK_ICN_REG>;
  49                 clock-names     = "ahci_clk";
  50         };