Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

   1 Broadcom BCM281xx Pin Controller
   2
   3 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
   4 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
   5
   6 === Pin Controller Node ===
   7
   8 Required Properties:
   9
  10 - compatible:   Must be "brcm,bcm11351-pinctrl"
  11 - reg:          Base address of the PAD Controller register block and the size
  12                 of the block.
  13
  14 For example, the following is the bare minimum node:
  15
  16         pinctrl@35004800 {
  17                 compatible = "brcm,bcm11351-pinctrl";
  18                 reg = <0x35004800 0x430>;
  19         };
  20
  21 As a pin controller device, in addition to the required properties, this node
  22 should also contain the pin configuration nodes that client devices reference,
  23 if any.
  24
  25 === Pin Configuration Node ===
  26
  27 Each pin configuration node is a sub-node of the pin controller node and is a
  28 container of an arbitrary number of subnodes, called pin group nodes in this
  29 document.
  30
  31 Please refer to the pinctrl-bindings.txt in this directory for details of the
  32 common pinctrl bindings used by client devices, including the definition of a
  33 "pin configuration node".
  34
  35 === Pin Group Node ===
  36
  37 A pin group node specifies the desired pin mux and/or pin configuration for an
  38 arbitrary number of pins.  The name of the pin group node is optional and not
  39 used.
  40
  41 A pin group node only affects the properties specified in the node, and has no
  42 effect on any properties that are omitted.
  43
  44 The pin group node accepts a subset of the generic pin config properties. For
  45 details generic pin config properties, please refer to pinctrl-bindings.txt
  46 and <include/linux/pinctrl/pinconfig-generic.h>.
  47
  48 Each pin controlled by this pin controller belong to one of three types:
  49 Standard, I2C, and HDMI.  Each type accepts a different set of pin config
  50 properties.  A list of pins and their types is provided below.
  51
  52 Required Properties (applicable to all pins):
  53
  54 - pins:         Multiple strings.  Specifies the name(s) of one or more pins to
  55                 be configured by this node.
  56
  57 Optional Properties (for standard pins):
  58
  59 - function:                     String. Specifies the pin mux selection. Values
  60                                 must be one of: "alt1", "alt2", "alt3", "alt4"
  61 - input-schmitt-enable:         No arguments. Enable schmitt-trigger mode.
  62 - input-schmitt-disable:        No arguments. Disable schmitt-trigger mode.
  63 - bias-pull-up:                 No arguments. Pull up on pin.
  64 - bias-pull-down:               No arguments. Pull down on pin.
  65 - bias-disable:                 No arguments. Disable pin bias.
  66 - slew-rate:                    Integer. Meaning depends on configured pin mux:
  67                                 *_SCL or *_SDA:
  68                                         0: Standard(100kbps)& Fast(400kbps) mode
  69                                         1: Highspeed (3.4Mbps) mode
  70                                 IC_DM or IC_DP:
  71                                         0: normal slew rate
  72                                         1: fast slew rate
  73                                 Otherwise:
  74                                         0: fast slew rate
  75                                         1: normal slew rate
  76 - input-enable:                 No arguments. Enable input (does not affect
  77                                 output.)
  78 - input-disable:                No arguments. Disable input (does not affect
  79                                 output.)
  80 - drive-strength:               Integer. Drive strength in mA.  Valid values are
  81                                 2, 4, 6, 8, 10, 12, 14, 16 mA.
  82
  83 Optional Properties (for I2C pins):
  84
  85 - function:                     String. Specifies the pin mux selection. Values
  86                                 must be one of: "alt1", "alt2", "alt3", "alt4"
  87 - bias-pull-up:                 Integer. Pull up strength in Ohm. There are 3
  88                                 pull-up resisitors (1.2k, 1.8k, 2.7k) available
  89                                 in parallel for I2C pins, so the valid values
  90                                 are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
  91 - bias-disable:                 No arguments. Disable pin bias.
  92 - slew-rate:                    Integer. Meaning depends on configured pin mux:
  93                                 *_SCL or *_SDA:
  94                                         0: Standard(100kbps)& Fast(400kbps) mode
  95                                         1: Highspeed (3.4Mbps) mode
  96                                 IC_DM or IC_DP:
  97                                         0: normal slew rate
  98                                         1: fast slew rate
  99                                 Otherwise:
 100                                         0: fast slew rate
 101                                         1: normal slew rate
 102 - input-enable:                 No arguments. Enable input (does not affect
 103                                 output.)
 104 - input-disable:                No arguments. Disable input (does not affect
 105                                 output.)
 106
 107 Optional Properties (for HDMI pins):
 108
 109 - function:                     String. Specifies the pin mux selection. Values
 110                                 must be one of: "alt1", "alt2", "alt3", "alt4"
 111 - slew-rate:                    Integer. Controls slew rate.
 112                                         0: Standard(100kbps)& Fast(400kbps) mode
 113                                         1: Highspeed (3.4Mbps) mode
 114 - input-enable:                 No arguments. Enable input (does not affect
 115                                 output.)
 116 - input-disable:                No arguments. Disable input (does not affect
 117                                 output.)
 118
 119 Example:
 120 // pin controller node
 121 pinctrl@35004800 {
 122         compatible = "brcm,bcm11351-pinctrl";
 123         reg = <0x35004800 0x430>;
 124
 125         // pin configuration node
 126         dev_a_default: dev_a_active {
 127                 //group node defining 1 standard pin
 128                 grp_1 {
 129                         pins            = "std_pin1";
 130                         function        = "alt1";
 131                         input-schmitt-enable;
 132                         bias-disable;
 133                         slew-rate       = <1>;
 134                         drive-strength  = <4>;
 135                 };
 136
 137                 // group node defining 2 I2C pins
 138                 grp_2 {
 139                         pins            = "i2c_pin1", "i2c_pin2";
 140                         function        = "alt2";
 141                         bias-pull-up    = <720>;
 142                         input-enable;
 143                 };
 144
 145                 // group node defining 2 HDMI pins
 146                 grp_3 {
 147                         pins            = "hdmi_pin1", "hdmi_pin2";
 148                         function        = "alt3";
 149                         slew-rate       = <1>;
 150                 };
 151
 152                 // other pin group nodes
 153                 ...
 154         };
 155
 156         // other pin configuration nodes
 157         ...
 158 };
 159
 160 In the example above, "dev_a_active" is a pin configuration node with a number
 161 of sub-nodes.  In the pin group node "grp_1", one pin, "std_pin1", is defined in
 162 the "pins" property.  Thus, the remaining properties in the "grp_1" node applies
 163 only to this pin, including the following settings:
 164  - setting pinmux to "alt1"
 165  - enabling schmitt-trigger (hystersis) mode
 166  - disabling pin bias
 167  - setting the slew-rate to 1
 168  - setting the drive strength to 4 mA
 169 Note that neither "input-enable" nor "input-disable" was specified - the pinctrl
 170 subsystem will therefore leave this property unchanged from whatever state it
 171 was in before applying these changes.
 172
 173 The "pins" property in the pin group node "grp_2" specifies two pins -
 174 "i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node,
 175 therefore, applies to both of these pins.  The properties include:
 176  - setting pinmux to "alt2"
 177  - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors
 178    in parallel)
 179  - enabling both pins' input
 180 "slew-rate" is not specified in this pin group node, so the slew-rate for these
 181 pins are left as-is.
 182
 183 Finally, "grp_3" defines two HDMI pins.  The following properties are applied to
 184 both pins:
 185  - setting pinmux to "alt3"
 186  - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps
 187    Highspeed mode
 188 The input is neither enabled or disabled, and is left untouched.
 189
 190 === Pin Names and Type ===
 191
 192 The following are valid pin names and their pin types:
 193
 194         "adcsync",              Standard
 195         "bat_rm",               Standard
 196         "bsc1_scl",             I2C
 197         "bsc1_sda",             I2C
 198         "bsc2_scl",             I2C
 199         "bsc2_sda",             I2C
 200         "classgpwr",            Standard
 201         "clk_cx8",              Standard
 202         "clkout_0",             Standard
 203         "clkout_1",             Standard
 204         "clkout_2",             Standard
 205         "clkout_3",             Standard
 206         "clkreq_in_0",          Standard
 207         "clkreq_in_1",          Standard
 208         "cws_sys_req1",         Standard
 209         "cws_sys_req2",         Standard
 210         "cws_sys_req3",         Standard
 211         "digmic1_clk",          Standard
 212         "digmic1_dq",           Standard
 213         "digmic2_clk",          Standard
 214         "digmic2_dq",           Standard
 215         "gpen13",               Standard
 216         "gpen14",               Standard
 217         "gpen15",               Standard
 218         "gpio00",               Standard
 219         "gpio01",               Standard
 220         "gpio02",               Standard
 221         "gpio03",               Standard
 222         "gpio04",               Standard
 223         "gpio05",               Standard
 224         "gpio06",               Standard
 225         "gpio07",               Standard
 226         "gpio08",               Standard
 227         "gpio09",               Standard
 228         "gpio10",               Standard
 229         "gpio11",               Standard
 230         "gpio12",               Standard
 231         "gpio13",               Standard
 232         "gpio14",               Standard
 233         "gps_pablank",          Standard
 234         "gps_tmark",            Standard
 235         "hdmi_scl",             HDMI
 236         "hdmi_sda",             HDMI
 237         "ic_dm",                Standard
 238         "ic_dp",                Standard
 239         "kp_col_ip_0",          Standard
 240         "kp_col_ip_1",          Standard
 241         "kp_col_ip_2",          Standard
 242         "kp_col_ip_3",          Standard
 243         "kp_row_op_0",          Standard
 244         "kp_row_op_1",          Standard
 245         "kp_row_op_2",          Standard
 246         "kp_row_op_3",          Standard
 247         "lcd_b_0",              Standard
 248         "lcd_b_1",              Standard
 249         "lcd_b_2",              Standard
 250         "lcd_b_3",              Standard
 251         "lcd_b_4",              Standard
 252         "lcd_b_5",              Standard
 253         "lcd_b_6",              Standard
 254         "lcd_b_7",              Standard
 255         "lcd_g_0",              Standard
 256         "lcd_g_1",              Standard
 257         "lcd_g_2",              Standard
 258         "lcd_g_3",              Standard
 259         "lcd_g_4",              Standard
 260         "lcd_g_5",              Standard
 261         "lcd_g_6",              Standard
 262         "lcd_g_7",              Standard
 263         "lcd_hsync",            Standard
 264         "lcd_oe",               Standard
 265         "lcd_pclk",             Standard
 266         "lcd_r_0",              Standard
 267         "lcd_r_1",              Standard
 268         "lcd_r_2",              Standard
 269         "lcd_r_3",              Standard
 270         "lcd_r_4",              Standard
 271         "lcd_r_5",              Standard
 272         "lcd_r_6",              Standard
 273         "lcd_r_7",              Standard
 274         "lcd_vsync",            Standard
 275         "mdmgpio0",             Standard
 276         "mdmgpio1",             Standard
 277         "mdmgpio2",             Standard
 278         "mdmgpio3",             Standard
 279         "mdmgpio4",             Standard
 280         "mdmgpio5",             Standard
 281         "mdmgpio6",             Standard
 282         "mdmgpio7",             Standard
 283         "mdmgpio8",             Standard
 284         "mphi_data_0",          Standard
 285         "mphi_data_1",          Standard
 286         "mphi_data_2",          Standard
 287         "mphi_data_3",          Standard
 288         "mphi_data_4",          Standard
 289         "mphi_data_5",          Standard
 290         "mphi_data_6",          Standard
 291         "mphi_data_7",          Standard
 292         "mphi_data_8",          Standard
 293         "mphi_data_9",          Standard
 294         "mphi_data_10",         Standard
 295         "mphi_data_11",         Standard
 296         "mphi_data_12",         Standard
 297         "mphi_data_13",         Standard
 298         "mphi_data_14",         Standard
 299         "mphi_data_15",         Standard
 300         "mphi_ha0",             Standard
 301         "mphi_hat0",            Standard
 302         "mphi_hat1",            Standard
 303         "mphi_hce0_n",          Standard
 304         "mphi_hce1_n",          Standard
 305         "mphi_hrd_n",           Standard
 306         "mphi_hwr_n",           Standard
 307         "mphi_run0",            Standard
 308         "mphi_run1",            Standard
 309         "mtx_scan_clk",         Standard
 310         "mtx_scan_data",        Standard
 311         "nand_ad_0",            Standard
 312         "nand_ad_1",            Standard
 313         "nand_ad_2",            Standard
 314         "nand_ad_3",            Standard
 315         "nand_ad_4",            Standard
 316         "nand_ad_5",            Standard
 317         "nand_ad_6",            Standard
 318         "nand_ad_7",            Standard
 319         "nand_ale",             Standard
 320         "nand_cen_0",           Standard
 321         "nand_cen_1",           Standard
 322         "nand_cle",             Standard
 323         "nand_oen",             Standard
 324         "nand_rdy_0",           Standard
 325         "nand_rdy_1",           Standard
 326         "nand_wen",             Standard
 327         "nand_wp",              Standard
 328         "pc1",                  Standard
 329         "pc2",                  Standard
 330         "pmu_int",              Standard
 331         "pmu_scl",              I2C
 332         "pmu_sda",              I2C
 333         "rfst2g_mtsloten3g",    Standard
 334         "rgmii_0_rx_ctl",       Standard
 335         "rgmii_0_rxc",          Standard
 336         "rgmii_0_rxd_0",        Standard
 337         "rgmii_0_rxd_1",        Standard
 338         "rgmii_0_rxd_2",        Standard
 339         "rgmii_0_rxd_3",        Standard
 340         "rgmii_0_tx_ctl",       Standard
 341         "rgmii_0_txc",          Standard
 342         "rgmii_0_txd_0",        Standard
 343         "rgmii_0_txd_1",        Standard
 344         "rgmii_0_txd_2",        Standard
 345         "rgmii_0_txd_3",        Standard
 346         "rgmii_1_rx_ctl",       Standard
 347         "rgmii_1_rxc",          Standard
 348         "rgmii_1_rxd_0",        Standard
 349         "rgmii_1_rxd_1",        Standard
 350         "rgmii_1_rxd_2",        Standard
 351         "rgmii_1_rxd_3",        Standard
 352         "rgmii_1_tx_ctl",       Standard
 353         "rgmii_1_txc",          Standard
 354         "rgmii_1_txd_0",        Standard
 355         "rgmii_1_txd_1",        Standard
 356         "rgmii_1_txd_2",        Standard
 357         "rgmii_1_txd_3",        Standard
 358         "rgmii_gpio_0",         Standard
 359         "rgmii_gpio_1",         Standard
 360         "rgmii_gpio_2",         Standard
 361         "rgmii_gpio_3",         Standard
 362         "rtxdata2g_txdata3g1",  Standard
 363         "rtxen2g_txdata3g2",    Standard
 364         "rxdata3g0",            Standard
 365         "rxdata3g1",            Standard
 366         "rxdata3g2",            Standard
 367         "sdio1_clk",            Standard
 368         "sdio1_cmd",            Standard
 369         "sdio1_data_0",         Standard
 370         "sdio1_data_1",         Standard
 371         "sdio1_data_2",         Standard
 372         "sdio1_data_3",         Standard
 373         "sdio4_clk",            Standard
 374         "sdio4_cmd",            Standard
 375         "sdio4_data_0",         Standard
 376         "sdio4_data_1",         Standard
 377         "sdio4_data_2",         Standard
 378         "sdio4_data_3",         Standard
 379         "sim_clk",              Standard
 380         "sim_data",             Standard
 381         "sim_det",              Standard
 382         "sim_resetn",           Standard
 383         "sim2_clk",             Standard
 384         "sim2_data",            Standard
 385         "sim2_det",             Standard
 386         "sim2_resetn",          Standard
 387         "sri_c",                Standard
 388         "sri_d",                Standard
 389         "sri_e",                Standard
 390         "ssp_extclk",           Standard
 391         "ssp0_clk",             Standard
 392         "ssp0_fs",              Standard
 393         "ssp0_rxd",             Standard
 394         "ssp0_txd",             Standard
 395         "ssp2_clk",             Standard
 396         "ssp2_fs_0",            Standard
 397         "ssp2_fs_1",            Standard
 398         "ssp2_fs_2",            Standard
 399         "ssp2_fs_3",            Standard
 400         "ssp2_rxd_0",           Standard
 401         "ssp2_rxd_1",           Standard
 402         "ssp2_txd_0",           Standard
 403         "ssp2_txd_1",           Standard
 404         "ssp3_clk",             Standard
 405         "ssp3_fs",              Standard
 406         "ssp3_rxd",             Standard
 407         "ssp3_txd",             Standard
 408         "ssp4_clk",             Standard
 409         "ssp4_fs",              Standard
 410         "ssp4_rxd",             Standard
 411         "ssp4_txd",             Standard
 412         "ssp5_clk",             Standard
 413         "ssp5_fs",              Standard
 414         "ssp5_rxd",             Standard
 415         "ssp5_txd",             Standard
 416         "ssp6_clk",             Standard
 417         "ssp6_fs",              Standard
 418         "ssp6_rxd",             Standard
 419         "ssp6_txd",             Standard
 420         "stat_1",               Standard
 421         "stat_2",               Standard
 422         "sysclken",             Standard
 423         "traceclk",             Standard
 424         "tracedt00",            Standard
 425         "tracedt01",            Standard
 426         "tracedt02",            Standard
 427         "tracedt03",            Standard
 428         "tracedt04",            Standard
 429         "tracedt05",            Standard
 430         "tracedt06",            Standard
 431         "tracedt07",            Standard
 432         "tracedt08",            Standard
 433         "tracedt09",            Standard
 434         "tracedt10",            Standard
 435         "tracedt11",            Standard
 436         "tracedt12",            Standard
 437         "tracedt13",            Standard
 438         "tracedt14",            Standard
 439         "tracedt15",            Standard
 440         "txdata3g0",            Standard
 441         "txpwrind",             Standard
 442         "uartb1_ucts",          Standard
 443         "uartb1_urts",          Standard
 444         "uartb1_urxd",          Standard
 445         "uartb1_utxd",          Standard
 446         "uartb2_urxd",          Standard
 447         "uartb2_utxd",          Standard
 448         "uartb3_ucts",          Standard
 449         "uartb3_urts",          Standard
 450         "uartb3_urxd",          Standard
 451         "uartb3_utxd",          Standard
 452         "uartb4_ucts",          Standard
 453         "uartb4_urts",          Standard
 454         "uartb4_urxd",          Standard
 455         "uartb4_utxd",          Standard
 456         "vc_cam1_scl",          I2C
 457         "vc_cam1_sda",          I2C
 458         "vc_cam2_scl",          I2C
 459         "vc_cam2_sda",          I2C
 460         "vc_cam3_scl",          I2C
 461         "vc_cam3_sda",          I2C