sched/debug: Print out idle balance values even on !CONFIG_SCHEDSTATS kernels
[linux/fpc-iii.git] / drivers / fmc / fmc-write-eeprom.c
blob9bb2cbd5c9f265e421ded04a69b72f37141a2663
1 /*
2 * Copyright (C) 2012 CERN (www.cern.ch)
3 * Author: Alessandro Rubini <rubini@gnudd.com>
5 * Released according to the GNU GPL, version 2 or any later version.
7 * This work is part of the White Rabbit project, a research effort led
8 * by CERN, the European Institute for Nuclear Research.
9 */
10 #include <linux/module.h>
11 #include <linux/string.h>
12 #include <linux/firmware.h>
13 #include <linux/init.h>
14 #include <linux/fmc.h>
15 #include <asm/unaligned.h>
18 * This module uses the firmware loader to program the whole or part
19 * of the FMC eeprom. The meat is in the _run functions. However, no
20 * default file name is provided, to avoid accidental mishaps. Also,
21 * you must pass the busid argument
23 static struct fmc_driver fwe_drv;
25 FMC_PARAM_BUSID(fwe_drv);
27 /* The "file=" is like the generic "gateware=" used elsewhere */
28 static char *fwe_file[FMC_MAX_CARDS];
29 static int fwe_file_n;
30 module_param_array_named(file, fwe_file, charp, &fwe_file_n, 0444);
32 static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw,
33 int write)
35 const uint8_t *p = fw->data;
36 int len = fw->size;
37 uint16_t thislen, thisaddr;
38 int err;
40 /* format is: 'w' addr16 len16 data... */
41 while (len > 5) {
42 thisaddr = get_unaligned_le16(p+1);
43 thislen = get_unaligned_le16(p+3);
44 if (p[0] != 'w' || thislen + 5 > len) {
45 dev_err(&fmc->dev, "invalid tlv at offset %ti\n",
46 p - fw->data);
47 return -EINVAL;
49 err = 0;
50 if (write) {
51 dev_info(&fmc->dev, "write %i bytes at 0x%04x\n",
52 thislen, thisaddr);
53 err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen);
55 if (err < 0) {
56 dev_err(&fmc->dev, "write failure @0x%04x\n",
57 thisaddr);
58 return err;
60 p += 5 + thislen;
61 len -= 5 + thislen;
63 if (write)
64 dev_info(&fmc->dev, "write_eeprom: success\n");
65 return 0;
68 static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw)
70 int ret;
72 dev_info(&fmc->dev, "programming %zi bytes\n", fw->size);
73 ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size);
74 if (ret < 0) {
75 dev_info(&fmc->dev, "write_eeprom: error %i\n", ret);
76 return ret;
78 dev_info(&fmc->dev, "write_eeprom: success\n");
79 return 0;
82 static int fwe_run(struct fmc_device *fmc, const struct firmware *fw, char *s)
84 char *last4 = s + strlen(s) - 4;
85 int err;
87 if (!strcmp(last4, ".bin"))
88 return fwe_run_bin(fmc, fw);
89 if (!strcmp(last4, ".tlv")) {
90 err = fwe_run_tlv(fmc, fw, 0);
91 if (!err)
92 err = fwe_run_tlv(fmc, fw, 1);
93 return err;
95 dev_err(&fmc->dev, "invalid file name \"%s\"\n", s);
96 return -EINVAL;
100 * Programming is done at probe time. Morever, only those listed with
101 * busid= are programmed.
102 * card is probed for, only one is programmed. Unfortunately, it's
103 * difficult to know in advance when probing the first card if others
104 * are there.
106 static int fwe_probe(struct fmc_device *fmc)
108 int err, index = 0;
109 const struct firmware *fw;
110 struct device *dev = &fmc->dev;
111 char *s;
113 if (!fwe_drv.busid_n) {
114 dev_err(dev, "%s: no busid passed, refusing all cards\n",
115 KBUILD_MODNAME);
116 return -ENODEV;
118 if (fmc->op->validate)
119 index = fmc->op->validate(fmc, &fwe_drv);
120 if (index < 0) {
121 pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME,
122 dev_name(dev));
123 return -ENODEV;
125 if (index >= fwe_file_n) {
126 pr_err("%s: no filename for device index %i\n",
127 KBUILD_MODNAME, index);
128 return -ENODEV;
130 s = fwe_file[index];
131 if (!s) {
132 pr_err("%s: no filename for \"%s\" not programming\n",
133 KBUILD_MODNAME, dev_name(dev));
134 return -ENOENT;
136 err = request_firmware(&fw, s, dev);
137 if (err < 0) {
138 dev_err(&fmc->dev, "request firmware \"%s\": error %i\n",
139 s, err);
140 return err;
142 fwe_run(fmc, fw, s);
143 release_firmware(fw);
144 return 0;
147 static int fwe_remove(struct fmc_device *fmc)
149 return 0;
152 static struct fmc_driver fwe_drv = {
153 .version = FMC_VERSION,
154 .driver.name = KBUILD_MODNAME,
155 .probe = fwe_probe,
156 .remove = fwe_remove,
157 /* no table, as the current match just matches everything */
160 static int fwe_init(void)
162 int ret;
164 ret = fmc_driver_register(&fwe_drv);
165 return ret;
168 static void fwe_exit(void)
170 fmc_driver_unregister(&fwe_drv);
173 module_init(fwe_init);
174 module_exit(fwe_exit);
176 MODULE_LICENSE("GPL");